Router is not connecting to the internet.

Similar Questions

• My Airport Extreme is connected to a cable modem from Arris Surfboard, overtime, I try to set up it tells me that I am not connected to the Internet if I use a router TP - Link AC1750 can I connect is not my ISP. What I am doing wrong?

  I followed the instructions on how to set up my Airport Extreme, but he says that I am not connected to the internet.

  I can connect with a wireless router TP-Link is not a problem with my service provider. I want to connect with my Airport Extreme.

  What I am doing wrong?

  What exact model of the modem Arris do you have? Is your service provider Internet Cox, by chance?

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.

• not connected to the internet. Checked, connections w / wireless router. Everything looks ok. still no signal

  All of a sudden not connected to the internet. Checked, connections w / wireless router. Everything looks ok. still no signal.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Refer to the following articles. The steps of troubleshooting in these articles may help you resolve this problem.
  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

• Router is not connecting to the modem so I can't get internet

  All right-_ - I tried a lot of things with this so I get irritated sorry. Here is my info I have a Linksys Wireless Router with SpeedBoost Firmware Version 7.2 WRT54GS (latest version). I'm trying to use it with a Sprint 645 series Modem. My IP address when you are connected to the router and the router connected to the Modem is 192.168.1.100 who my ISP said was ok to make it work. While it is just connected to my modem, it's the same thing except replace the 100 by 1. My ISP uses a measure of security where The Thing DHCP is 192.168.1.1 and so is the DNS server and default gateway and im not sure if this has something to do with it. I used the ping at a command prompt to make sure that I am connected to the router when its plugged up and it is. This is a new router. I have internet with Modem just perfectly. I tried to reset the router and that does not work-_-. I don't think it is important more because I tried to fix the many way people have told me and it didn't work, but I'll tell u in any case. When I put up the first router time I hung and lit everything at the beginning. Then I noticed that it says Run CD before to connect the cables... those who were not in the instructions but wtv... anyway resetting should have fixed or so I was told by other people on this forum. I use a laptop with Windows Vista, and I don't have access to a desktop computer in case I need a XD. I can connect to the router fine because I can access the Setup page... and I can connect wireless... The ONLY problem seems to be that the router will not connect to the Modem... for some reason of wtv-_ - I think that its because the entire security measure on the way to the DHCP and the DSN and the bridge are all 192.168.1.1, but that's just me. I'm sorry this is very long but I really want this problem-_ - I had this router for a month and becomes really annoying so please help . My ISP is Embarq. I ran the installation CD and I had all through the last step (standby router) after having connected the power supply to the wall for the router. Just, it is there forever and then says "error: 322 cannot find router or something like that." There are 3 steps to try to fix it. It says to make sure that the router is connected (it is), it is said also to make sure that u does not actually connect your old router, (I don't have a-_-) and then re-run Setup. and by the installer, I mean where u plug in all the cables in the right way. * sigh *.

  If you need anything else please ask.

  Your second post says "" ignore this "so I guess everyone thought that you set..."

  When you connect through your router that you have two instances of DHCP past... one is your DSL modem with router IP address on its WAN interface. The other is the router that gives your computer an IP address via the DHCP server on the router. The IP address of the modem gives your router is in the 192.168.1.0 network. Unfortunately, by default, the reange of Linksys routers LAN IP address is also in this range. For that to work, you must set your router 192.168.2.1 LAN ip, so that the LAN and WAN router interfaces are in different networks.

  To do this, unplug the DSL modem router, power it and your computer, and then connect the computer to the router by an ethernet cable. Turn on the router and the computer, and then go to 192.168.1.1. Change the LAN IP on router 192.168.2.1, save the configuration, and then restart the computer. Once the computer returns to the top, navigate to 192.168.2.1... you should be able to get to the router GUI configuration.

  Turn off the router and the DSL modem, connect the router to the modem via the Internet port using an ethernet cable, and then turn on the modem, then the router... you should be good to go...

• I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet.

  Connected to the new router, but locally only.

  Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
  BASICALLY,.

  I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)

  I can connect if I use a cable, but its disadvantages.

  I can connect wirelessly with my PC and Ipad. and Internet access.

  I TRIED:
  Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »

  Thank you in advance and we hope you can answer this soon!

  I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
  Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.

  Hi Bryyaan11,

  You can check out the link to HP support and try to download the drivers for your wireless card updated:

  Support HP & drivers

  For more information, you can also consult the following article:

  Updated a hardware driver that is not working properly

  You can also check the following items and try the steps:

  Windows wireless and wired network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.

• HP Deskjet 3510: Printer not connected to the Internet after new router purchase.

  After buying a new router, printer does not work. Is not connected to the Internet. I followed the instructions on how to connect but nothing I did helped. Wireless test results show the printer are currently configured with an automatic IP address, I don't know why or how this happened. Also shows that wireless and wireless is working and success to the configuration of the printer, just not connected to the Internet.

  Yes you will need a printer USB cable like this.

  http://www.Amazon.com/AmazonBasics-USB-2-0-cable--male/DP/B00NH11KIK/ref=sr_1_1?ie=UTF8&QID=1458167924&SR=8-1&keywords=printer+USB

• Airport utility: green points on the AirPort Extreme & Internet; Mini Mac does not connect to the internet.

  Airport utility shows green points on the AirPort Extreme and the Internet, but my my Mac mini does not connect to the internet. IPhones and 2 portable Windows connect very well, and see all the devices on the home network. The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem. I tried to stop and things start back up as if the installation of the internet for the first time. No joy.

  The airport connects using DHCP in Bridge Mode

  The router address is 192.168.80.1

  Address IPv4 is 192.168.80.2

  DNS server is the same as the router, but grayed out

  Mac Mini IPv4 Address is 192.168.80.3

  IPv6 automatically configures

  Also updated the firmware of the airport; no change.

  ISP guy was friendly but puzzled. He started at the top floor level Tech, so I do not know when I hear back.

  Any ideas to fix?

  Thank you.

  Post edited by: en maschera

  but my my Mac mini does not connect to the internet.

  The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem.

  Hello

  Network preferences may be damaged.

  Open the Finder. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  / Library/Preferences/SystemConfiguration

  Click OK, and then move all files in the SystemConfiguration folder to the trash.

  Restart your Mac. See if that makes a difference.

  Your Mac will generate a new SystemConfiguration folder for you.

  Then open AirPort Utility located in HD > Applications > Utilitiies

  Make sure that both Internet and Extreme are green.

  

• Cannot install iOS 9.3 on my iPad. Said that I'm not connected to the internet

  CCannot install iOS 9.3 on my iPad. Said that I'm not connected to the Internet. Router rebooted, says even I'm not connected.

  I have this same problem with my iPhone 5 s. hope someone can provide an answer.

• Error: Your device is not connected to the Internet.

  Hello

  I have a dash HID - B70 model and until last week it works fine. I used about 2 weeks ago and have had on energy saving mode after that. I tried to use it again a couple of days, and when I typed on the screen the unit remained in power save screen and showed a yellow above the clock error message: "your device is not connected to the Internet. Press to reconnect. "I hit this button and the unit tried to reconnect, but will still end up back in the same error message and the screen.
  I tried to push the reset button on the device, but I still see the same black screen and the clock with the error message once it restarts. I unplugged my wireless router and managed to get the device to show me the other wireless networks, then I plugged the router back in and reconnected (device showed that the connection was successful), but then he went immediately to the error screen.
  I can't the unit to go to the home menu at all, no matter what button I push, if unfortunately I can't even reset to factory settings to avoid the problem.

  Any advice on how to fix this? I do know not why it happened because I didn't have the routers or wireless providers, nor have I added all devices on my home network.

  Thanks in advance for your help.

  
  

• not connected to the internet deskjet 3520

  First day instaled deskjet 3520 printer all-in-one on the internet ok

  Two days does not connect to the internet.

  My internet connection is ok for my laptop and mobile

  Hi rubyjim,

  Thank you for the additional information.  I was very surprised to see the number of disconnects the printer has had in the last 24 hours.

  According to the information provided, I'm surmising that you stopped in step: evaluate the wireless network Test page according to the wireless network Test page you are correctly connected to your network.  In this step you ask to change the change to your wireless router, you please begin at this stage and test wireless printing?    If you are unable to print please continue with the remaining steps.  For ease of reference, I have included a list of the document printer does not maintain the wireless connection again.

• My Apple Watch does not OS 2.1 update. Keep saying at the end that cannot verify the update as long as it is not connected to the internet. The iStore even tried and they couldn't help.

  Nice day

  I need help with my Apple Watch. I tried the update to OS 2.1. I can't update as the right at the end of the download it says cannot verify the update as long as it is not connected to the internet. I made sure wifi was strong, batteries were in charge, I have even matched and re-paired the watch. I took it to the iStore so they couldn't get it updated and everything they said was sorry, you will have to wait the next update be released. Everyone dealing with this issue? What should do?

  Concerning

  Hello

  Because the update for you Apple Watch comes from your iphone is your iphone

  Running ios 9.2?

  If, then go to settings on iPhone reset network settings after reset entered your key wireless router.

  Also before doing this turn off your router for 30 seconds.

  Then repeat the update of watch.

  See you soon

  Brian

• Error message that I am not connected to the internet on some app

  Some of my programs will not update (automatic or manual) when I am online. Quicken, RoboForm, CCLeaner will be updated without problem. I was not able to install SP2, as well as updates of .NET Framework on my PC (XP Pro have). Suite of McAfee or Norton 360 will not update their definitions. I can open the Windows IE or Mozilla and go to the site, but I still see a message that I am not connected to the Internet. I have a broadband wireless router/w.

  Hi ricklnewman,

  ·        You receive an error message or error code when you try to install Service Pack or .net Framework?

  The antivirus installed on your computer can block windows update in order to install. Microsoft recommends not having more security or anti-virus software installed on your computer, as this could cause conflict of files.

  Follow the methods below:

  1 start your computer in aclean boot and try to install the updates. Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135

  Make sure that you reset the computer in normal mode (you can see step 7)

  2. reset windows update components, you can see the below link for the same thing:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  See the links below to obtain the latest service pack for Windows XP:

  How to obtain the latest Windows XP service pack: http://support.microsoft.com/kb/322389

  You can download and install the standalone product of the .net framework from the link below:

  Microsoft .NET Framework 2.0 Service Pack 2:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b2c0358-915B-4eb5-9b1d-10e506da9d0f&displaylang=en

  Microsoft .NET Framework 1.0 Service Pack 3:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=6978d761-4a92-4106-a9bc-83e78d4abc5b&displaylang=en

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• MY HP PHOTOSMART 7520E PRINTER IS NOT CONNECTED TO THE INTERNET

  I have a wireless printer HP Photosmart 7520e and following a power failure, I lost my Internet connection.  The printer works fine without any other problems, but for some reason any that it does not connect to the Internet. Appears on the printer 'wireless Direct' but it is not connected to the Internet.

  Hi filgrastin,

  Thank you for your answer! I have a few questions for you:

  • You are using a Mac or Windows operating system? What is the version number? To find the exact version, visit this link. Whatsmyos.
  • How far is the printer from the router?
  • What falls down on the Test report wireless?

  Here's how to print a Test report Wireless:

  • Load the white plain US letter or A4 paper in the tray, if it is not already.
  • On the Control Panel, press the Setup icon, and then tap on wireless. Wireless menu.
  • Press the Test report print wireless. The printer prints the test page.

  If you are running Windows, please try our HP print and Scan Doctorand let me know what happens.

  We hope to hear from you. and have a nice day!