router Linksys BEFSR41 ver-2

Similar Questions

• My router Linksys BEFSR41 (model) 4.2 (version) does not work after I tried

  to update to firmware Ver.2.00.4 Build 5. The power still works, but I can't connect to internet with it more. I pressed reset to 30 seconds and disconnected the power for 5 seconds and restarted my PC and it still does not work. Someone knows how to fix this?

  It won't even show the IP of the gateway by default more when I run the ipconfig command. I can't ping it.

  What IP address you get on your computer?

  Connect the modem to the Internet port and the computer and port Ethernet 1 of the router.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and check the IP address of your computer.

  If you get a valid IP address as 192.168.1.xxx then try to ping the 192.168.1.1 IP address.

  If you get the IP address auto-configuration as 169.254.x.x then assign a static IP address on the computer (192.168.1.10 subnet - 255.255.255.0, gateway - 192.168.1.1) and then try to ping the router.

  If you get answers from the router then try to open the router configuration page.

• BEFSR41 Ver 3 connection to the modem Motorola 2210 problem

  I have a simple (I hope) home office network configuration.  I have a router Linksys BEFSR41 Ver 3, a Vonage phone device, a couple of computers and printers all hooked into the router.  The problem appeared when my old modem is dead.  I replaced the old modem with the Motorola 2210 (from AT & T) and configure the modem, so now the internet works if I plug the line directly into my computer.  When I try to run it through the Linksys router, the signal comes through.  I've turned off and rebooted twice and the second time I did it in a particular order, but still no signal through the router.

  I see that the IP address of the router is 192.168.1.1 and 192.168.1.254 is the modem.  It seems that something needs to be reset somewhere, but since I'm no computer, I don't know what to reset where...  I read the other posts and they speak to reset a PPPoE on the BEF, but where do you do that?  And is there something different about my router 3 worm?    Any help is appreciated... I'm pretty frustrated and miss me phone calls from my device Vonage is not connected...

  Thank you very much in advance...

  Leslie

  You the problem is that you try to use the same subnet 192.168.1.x into the WAN (Internet) port and the LAN of your BEFSR41 ports.  You can't do that.

  Your modem is apparently made your PPPoE connection for you.  So you should NOT repeat this PPPoE connection in the BEFSR41.

  Setting network, follow these steps:

  (1) put your entire network.

  (2) disconnect all other devices BEFSR41.

  (3) connect your computer to one of the four ports LAN on the BEFSR41.

  (4) turn on the BEFSR41 and your computer.

  (5) point your browser to 192.168.1.1 and connect to your BEFSR41.

  (6) change the "Internet Connection Type" to «DHCP - auto»

  (7) change "local IP address" 192.168.2.1

  8) click the 'Save Settings' button, and then wait the screen refresh (3-60 seconds).  You will be disconnected from the BEFSR41.  Don't worry about this.

  (9) turn off the BEFSR41 and your computer.

  (10) wire the ethernet port of your modem to the Internet (WAN) on the BEFSR41 port.  Leave your computer connected to the BEFSR41.

  (11) power of your network.  It should work.

  BEFSR41 using you now on its LAN ports 192.168.2.x subnet.  You can now connect to the BEFSR41 facility to 192.168.2.1

• Linksys BEFSR41 connection with modem router getting not real internet ip

  Hello, can someone help with this problem. I connected to a modem router linksys BEFSR41 router. But when I watched the status in linksys BEFSR41 router, it gives only an IP from the modem router and no real internet ip address.

  can someone give me an answer.

  Thanks in advance.

  Don't string two routers. Fill the modem/router or don't use the BEF as a router, but only as a simple switch (or replace it with a standard ethernet switch).

• Problems with the new modem DSL and Linksys BEFSR41

  My Speedstream modem died and I had to buy a new modem.  At this time of year, it is difficult to find exactly what I wanted and I ended up buying a D-Link DSL - 2320-B.  I got the Linksys BEFSR41 (old version 1, I think) for years and it has always worked well.  I have problems to get an internet connection through the router.  With the modem connected directly to the network card, as now I have no connectivity problem.  I had to change the IP address on the Linksys BEFSR41 192.168.2.1, as the modem is 192.168.1.1, 192.168.0.1 as the old Speedstream.  I couldn't see a way to change the IP Address of the new D-Link.  I have my ICS TCP/IP set to auto obtain IP and DNS.  I was previously created for a fixed IP of * provided by the router.  Even with the setting on the router to "Obtain an IP address automatically", I can't to the internet with the router in the middle.

  Any help will be appreciated.

  Your modem is a combination of the modem and the router. The problem occurs when you try to connect another router behind this configuration and end up having 2 servers dhcp and nat 2 (for port forwarding and other issues, creating in some cases where even branded products use ip addresses will clash and devices will not connect at all when him are interconnected).

  To avoid the situation described above, it is recommended that you enable the full Bridge mode on the modem / router that you currently connected to the internet and let your new wireless router controls all the functions within your local network and the internet connection (you must enter all the details in the new router, including Internet service provider username and password).

• PC with Win XP SP3 cannot see router Linksys 1200, although it is there and connected.

  Friend got new router Linksys E1200. Initially set up with the PC above and worked fine for a week or two.

  Then loss of the connection.

  IPhone and MAC laptop work very well on the same network and laptop can access 192.168.1.1 but PC don't even see it.

  Diagnosis of IE says winsock error.

  Re-directed configuration Cisco on PC, but it failed to honor or find the router, even if the network is showing that connections wireless connected successfully to.

  Unintalled Cisco and tried to reinstall, but it fails the process because he can't see the router.

  Update firmware as suggested for router (via MAC laptop) - now V2.004 or something else.

  Changes security wireless WEP etc attempts but makes no difference. Changing the settings in the router itself does crashing. Had to reset to the factory settings and to reconfigure a number of times already, what she does very well on the laptop, but not at all on the PC.

  Any other suggestions?

  Hello

  Thank you for joining Microsoft Community!

  We will try to reset Winsock and look for the question.

  1. click on the Start button and click Run.

  2. type cmd in the search text box, and then pressCtrl-Shift-Enter (keyboard shortcut to run as administrator command prompt). Clickcontinue to allow elevation request.

  3. type netsh winsock reset in the command line shell and then press theenter key.

  4 type netsh int ipv4 reset in the command line shell, and then press theenter key.

  5 If you are using ipv6, type netsh int ipv6 reset in the command line shell, and then press the enter key.

  Note: You may need to run the Network Diagnostics later to repair your connection after that.

  Hope the information is helpful; If the problem persists, or if you face issue of Windows in the future let us know.
  We would be happy to help you!

• My computer does not my router Linksys detect my internet connection. Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.

  connection and download Internet problems

  My computer does not my router Linksys detect my internet connection.  Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.  How to solve these problems?  so that my programs to work, I need these features.

  Hello

  1. you are using a wired or wireless?

  2 have you made any changes to the computer before the show?

  3. you receive an error message when you try to connect the Linksys router to the computer?

  4. what exactly happens when you try to update I Tunes?

  5. you receive an error message while updating I Tunes software?

  Please provide more information on the issue so that we can better help you.

  In the meantime, you can try the steps of troubleshooting provided in the links below and check if the problem persists.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to configure the router Linksys DD - WRT for WVC54GCA E4200

  I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.

  I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:

  http://tzodns.com/support/tutorials/188

  http://tzodns.com/support/tutorials/190

  Hi Majekho,

  Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).

  In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
  In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at:

  http://helpdesk.TZO.com/cgi-bin/KB.cgi?view=140

• Connecting A Linksys WRT54G Ver 2 to an AT & T DSL 2Wire gateway Modem

  
  

  This link will give you instructions step by step how the router to another router or modem/router linksys cascade: cascade or connect a router to another Linksys router. If this link does not work for you, then you can follow the steps on this link on how to configure the router with a dsl connection, as long as you have an internet provider ADSL connection: setting up a router Linksys for DSL Internet connection.

• Router Linksys AC3200 interfering with Tv Vizio E55 - C1

  I recently bought a router Linksys AC3200 and E55 - C1 Vizio TV. The remote for my tv button and the power of Vizio Vizio TV have been sporadic in their functionality. I did all the troublehsooting Vizio recommended on their site and finally called for more tips. They recommended to me to stop my router and see if the power button and the remote control is working properly. I did and everything works normally. I was told that file sharing and network share on my router will cause this problem and for contact me Linksys to resolve. Does anyone know exactly what the router setting is the cause? Is not dictated by your operating system and not your router file sharing?

  You have the attached USB drive? The router can share its USB key when it is connected.

  Wired or wireless TV is connected to the router?

  Routers is close to the TV? I recommnd place the router away if possible.

• We add a wireless "router sub" or to our current router Linksys router cascading

  Hello

  Add a router under or a router cascade to our current Linksys router because when we have people at the meetings, we do not want our regular wireless accessible by all.  We look at the HD Video Pro EA6500.  Do we need to buy a bridge?  No matter who is the master and who is the slave?  Are there more questions, what should I ask?  The EA6500 is compatible with all other models of Linksys?   I read some of the questions and answers on this forum of the Linksys community but I don't know where I should start.

  Thank you very much.

  The Smart AC Linksys router Wi - Fi 1750 HD Video Pro, EA6500 allows you to access the Internet via the Wi - Fi and.  Router Linksys Smart WiFi, EA6500 is ideal for applications focused on media such as streaming video, games and voice over the Internet (VoIP) phone.

  More control over these articles.

  Get to know the router Linksys Smart Wi - Fi, EA6500

  Linksys router Smart Wi - Fi, EA6500 frequently asked questions

• How to reset the router linksys e 1000

  I bought a router linksys e1000 to my friend and he has security turned on this subject, I tryd it resettin but did not work. I called customer service and since its past the 30 day warranty I have to pay for low deal of tech support I know, how to reset this bad boy?

  Hello

  read this

  http://www.WikiHow.com/reset-a-Linksys-router

  and this

  Reset the factory default Linksys router

  http://www.Cisco.com/en/us/products/ps9923/products_qanda_item09186a0080a33bec.shtml

• Dell Inspiron 6000 - connects to the router Linksys wirelessly (?)

  Dell Inspiron 6000 - connects to the router Linksys wirelessly (?). Always done, now just stopped.

  Ideas: Laptop does not connect with the wi - fi router. Never of hade a problem before.

  Hello

  ·          What is the exact error message or code that you get when you try to connect to the wireless router?

  ·          You are able to connect to the internet via wired connection?

  Am adding this link, for your reference.

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Please provide us with more information so that we can help you in a much better way.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• VPN problem - "C1712 behind router Linksys ' connection to PIX515e

  Hi all

  I have a question about VPN (lan-to-lan).

  My setup is the following:

  10.1.20.x-[PIX515e_central site VPN concetrator]-(( ISP ))-[LINKSYS BEFSX41 router]-[Cisco1712_branch] - 192.168.14.x

  I would like to create tunnel VPN between C1712 and PIX515 (lan-to-lan), so users of 192.168.14.x would be able to connect to servers located on a central site in network 10.1.20.x.

  NAT - T is manually enabled on PIX and 'IPsec passtrough' is enabled on the Linksys router. Then what should I do now to create a VPN tunnel?

  What is the basic C1712 and PIX515e configuration to make it work?

  All other industries (8) work, but they are directly connected to the internet via C1712, so without router Linksys in front of him. Thus, PIX is already properly configured for this configuration.

  I guess that the installer with Linksys router does not work because of PAT.

  6.3 (4) version PIX

  C1712 Version 12.4

  Please advise!

  Thank you very much in advance!

  This line is incorrect on the router configuration:

  IP nat inside source list 6 interface FastEthernet0 overload

  Please, remove it and have her take:

  overload of IP nat inside source list 101 interface FastEthernet0

  Hope that solves this problem.