PC with Win XP SP3 cannot see router Linksys 1200, although it is there and connected.

Similar Questions

• I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help

  I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help, please.  Thank you!

  Hello golden2,.

  I understand that you have a DVD picture in your SuperDrive drive, but it is not mount on the desktop and will not eject.

  Please, try the procedure described in this article using the disc is ejected.

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  Do not eject discs or discs eject slowly

  1. If the drive ejects discs slowly or appears to have difficulty, insert and eject a disc several times. Check the disc to see if it has a label or other material stuck to the disc which increases the thickness. Remove the label if possible.
  2. If the disc does not eject, try pressing the eject on the keyboard button. Some older keyboards may use the F12 key to eject the disc.
  3. If the disc does not eject, try dragging the icon of the disk to the trash.
  4. If the disc will still not eject, try to hold down the mouse or trackpad button after you restart the computer. The Superdrive should attempt to eject the disc.
  5. If the disc still does not eject, reset the System Management Controller (SMC) and repeat steps 1 to 4.
  6. If the disc still does not eject, Contact Apple or an provider of services authorized Apple, or make an appointment with a Store Apple Store for further assistance.

  Take care.

• Scan HP PSC 1410 all in one printer works well, does not work with Win XP SP3

  I am well satisfied with my computer HP 2006, Win XP SP3; However when I had to reformat the HP PSC all-in-one printer that works well will analyze any more.  Microsoft says that it does not recognize the drivers for the scanner.

  Try to download software and software updates of the HP Web site.  See if that helps.

• Win 7 computer cannot see the computers on the network

  We have 3 computers on our network. A desktop computer running a laptop running Win 7 x 64, an office equipped with Win Vista and Win XP. All 3 are connected to the same workgroup and are properly connected to the internet. The two workstations can see and the laptop on the network and can move the files to the laptop, but the laptop cannot see other computers on the network. Whenever I try to open the network to move files to another computer, the icon just mouse sits and turns and the page remains blank. I thought that maybe he just needs time to see everything, left like that for hours without success. I went through all the troubleshooting steps in the win7 with nothing working Help Center. I don't understand why, if all the computers are on the same network, they can see me, but I don't see them. I am obviously connected properly so they can move the files to my computer. It may be unrelated, but I also can't update windows, keep getting error 80246008 when I try to run the update. Any suggestions on what I can do to fix this?

  Hello

  You can try the following steps and check whether the problem is resolved.

  Step 1:

  Networking of computers running different versions of Windows

   http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

   

  Step 2: Now, you will need to follow the links provided below to check if you are able to connect to the home network.

  Home Sweet homegroup

  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

   

  Step 3: Now, you will need to visit the link that will help you solve network problems.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Now, you can follow the steps in the link below

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-join-a-HomeGroup

  Windows Update error 80246008

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80246008

  It will be useful.

• Toshiba Kira - Win 8.1 cannot see all files on the 64 GB flash drive

  Hi all

  Newbie on this forum. I just bought the i5 8 GB of RAM Windows 8.1 Kira Ultrabook, a great little machine.

  I have a SanDisk 64 GB flash drive that has about 20 GB on it in a dozen files. These folders and the content can be seen by my Windows 7 PC, even my mobile phone and Tablet Tower.

  However, the Kira cannot see both files, even if in the properties of the drive, he sees the space correctly. Turned on all folders and no difference.
  My wife has a 32 GB flash - no problem.

  I reformatted the flash disk, run a virus on the disk and the Kira. The Kira can someone verify the maximum size flash can see it please? I can't find it in any documentation.

  Any help or suggestions appreciated - I ran support Toshiba without a response, so maybe someone here can help you.

  Mark
  Brisbane Australia

  The appearance of the folder is not in your laptop model or your system!

  I recommend you to check some common view windows Explorer settings:

  (1) to see the hidden files and folders reported as
  Click the view tab, and then click Show hidden files and folders.

  (2) to display all the system files that are usually hidden from view.
  Click on the view tab, and then clear the Hide protected operating system files check box.

  Here you will find all the information about the folder views and behavior
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-folder-views-and-behavior

• Win 7 computers cannot see Vista media centers - please help

  I have several laptops of W7 and Vista Office where my media is stored.

  They all belong to the same network and W7 computers are all part of the same homegroup.
  In Media Player, my Vista machine can see W7 machines and play their media, but W7 machines cannot see the libraries of Vista - which is where my media is housed.
  I checked all the options of 'Sharing' on the Vista machine and have allowed him to share the W7 OK machines but it is still not visible on all machines in W7.
  All the other settings appear correct, and I tried to disable Kaspersky just in case.
  Desperate!

  Hello

  Check the steps in the following article.

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• __Missing tab sharing on C:properties / sharing and securities with win xp sp3 windows Explorer

  I am networking two xp with a model of wind 7 comps.  The comp. xp is missing on the c:properties the sharing tab / sharing and stock selection.  I can not access this comp. on the network.  I get a message that the comp. is is not available... The other XP has the tab and I set up the sharing with everyone on my computer of wind 7 and I can see it under permissions.  Both xp have sp3 with all updates.
  Help!

  You run Acronis?  I read that this often causes the error "not enough storage space" when you try to share files.

• Win 7 install cannot see hard drive

  My office has a dual boot with two RAID 0 configuration bays (2 x 40 GB SSD Corsair and 2 x 230 GB Seagate Barracuda) with Windows 7 Home Premium 64 bit on each table. I wanted to convert the largest to a standard IDE configuration with a clean install of Windows 7. I disconnected one of the 230 disc gig and put the other 230 as an IDE drive in the Intel Storage Manager. Now, it appears in the BIOS and I can see as a D: drive in Windows, but Windows 7 install do not.

  With most large raid so disabled both Windows 7 boot choice appeared again during the boot, but of course that one can load. I tried to fix things with msconfig, which showed the two BONES, and I removed the disabled. But Windows 7 install again does not see the drive of 230 gig. (It's the disk Win 7 Upgrade btw)

  How can I resolve this installation issue?

  (1) you remove the existing partition and reformat the hard drive before installing Windows 7 on it? If this is not the case, do.

  (2) also the 230 GB drive must be connected to a standard SATA (Non RAID) port before installing Windows.

  What drives when using two pairs as RAID configurations has the "System" partition, it was the SSD drives or disks Seagate 2 x 230. I guess the system partition is on the SSD you can still start Windows with only the connected Yes SSD?  If Yes, then the steps 1 & 2 above are still valid.

  J W Stuart: http://www.pagestart.com

• Have Win 7, but cannot see what others can on their Win 7 PC.

  Cold installation that worries me.  I have no program illeagal, but however less, I fear I've lost something, which cannot yet identify.

  I have pictures on 2 websites and I seem to be the only person who can't see the images.  Happen them to be transferred by the person of his MAC, but I do not understand why it would affect onlyh me.

  Thoughts?  (Windows 7 SP 1)

  Hi Karenkee,
  First of all, I went to this page and see everything very well.
  Exactly what are the error messages you get from your browser?
  Was there nothing added/removed before this happened?
  b Eddie

• Problems with Firefox 13. Cannot see the drive of audio files online. Video only works on some sites. Everything works OK or update Flash. No change

  The problems started when Firefox updated 13. tried to download the latest version of Flash 11.2.202.235. No change.

  Video works sometimes on YouTube, not at all on most of the other sites.

  Audio player not working do not at all. Not yet visible or Real Player downloads against playing within the application like Amazon.

  Tried to turn Add ons to find the culprit. No luck.

  Just as there should be in Internet Explorer.

  On my WordPress site has MP3 audio files and uses a flashplayer to view and play music files. With flash player on, nothing appears, (Bank space where audio player would normally displayed)

  If I turn off the flash of the shock wave, a text link that Downloads MP3 in a new window (quick player), also video does not work on any Web site. If I turn off the Flash and quicktime, text link to downloads of audio file in realplayer.

  Thank you. I uninstalled Flash 11.3 and installed the old version, 10.3. Everything works fine now. I don't know if it is a problem of Mozilla or Adobe, but it seems strange that either would such a problem of incompatibility to exist.

• A15 8982 Thinkcentre M55 pc with win xp sp3

  I have an audio problem. All devices work & drivers are updated, but when I plug my headphones in front the sound is still audible from the pc - I cut back decision-making. I fiddled with the audio controls / properties does not. I can't play audio or video without the knowledge of the entire House! Any help would be appreciated.

  no problem, glad it worked for you.

  You can mark the post resolved, so that other people can get help from him in the future. Thank you.

• How can I connect a Tab2 10.1 Galaxy (GT-5100) on my laptop with win XP SP3?

  I installed mtppk12.exe and GT-p7510_USB_Driver_v1_3_2360_0 - Escape.exe

  I can see in windows only "Samsung USB Driver for mobile phones" was really installed.

  I also see in windows "USB Composite Device" is also installed.
  The android version this tablet is 4.0

  Hello

  You can download Samsung Kies 2.0 software to connect the Tab2 10.1 Galaxy (GT-5100) to your laptop.

  See the link below:

  http://www.Samsung.com/hk_en/consumer/mobile/mobile-phones/mobile-tablet/gt-P5100ZWATGY-support

  Contact the device manufacturer for assistance.

• Win XP SP3 cannot update manually, but the automatic update is fine

  I've just updated from XP SP2 to SP3, I just found out that I could not manually update in microsoft update, but the auto update schedules are ok. So is there a way to fix this?

  Please contact your school of departmental it or SysAdmin to get help, Roland.

  IMHO the computer must NOT be connected to the internet or local networks (i.e. other computers in your school) in its current state. All school & personal data should be considered at risk, if not already compromised.

• V18 with win xp sp3, avast and zone alarm attach more files. After reinstall added a file then no more

  Gmail gives no problem. Was no problem on earlier versions. Incoming attachments seem to be readable

  Please try version 19.0 as many questions is fixed in the latest version. Thank you!

• Vista: Cannot see wireless networks - I know they are there.

  I'm contracting at Microsoft and just installed the company issued IT Vista. Everything works fine: I joined the appropriate domain and can access all internal servers and the Internet with the ethernet cable is plugged.

  However, I don't know how to jump on the wireless network. My host OSX (10.5.6), I see the Microsoft WLAN airport is accelerating. Connection to the WLAN MS requires that I am connected to the correct field in Vista (I am), but I do not see the wireless networks - as if there is no such thing as a wireless NETWORK card.

  VMWare Tools are installed, and Device Manager shows my NIC is "Intel Pro/1000 MT Network Connection. I use the connection of NAT in Fusion. Diagnosis of the problem in Vista, he said: it is not an installed wireless device.

  Connection to the WLAN MS requires that I am connected to the correct field in Vista (I am), but I do not see the wireless networks - as if there is no such thing as a wireless NETWORK card.

  It does not exist. Take a look at: VMware Fusion (menu bar) > help > VMware Fusion help > Machine virtual Basics > virtual hardware specifications

  If you need to post by connecting to WiFi since in Vista then you will need to install a 3rd party USB WiFi NETWORK adapter in the Virtual Machine in Vista.