Router RV042 VPN Client access from Linux?
Hello world!
I have a question for the creators and users of RV042.
Is there a way to communicate with a Linux box for access on a RV042 VPN client? I'm trying to do that and play with the settings, but I am not able to connect. I tried profiles in OpenVPN, OpenSwan, kVPNc and others. For the most part, my problem is that all of these software require too many parameters and other certificates that only types that you can create on a RV042 (.pem files).
Please let me know if any of you were able to connect to a Linux box for on a RV042 VPN.
Also, I would ask the CISCO/Linksys people why they provide only a Windows client for this option? "Small companies" are devices not windows based commercial devices!
Thank you!
Zoli
Good day Zoli,
Unfortunately, there is not any Quickvpn client available for Linux and Macintosh which work together with the Small Business/Small Business routers Pro.
If I share your dismay that we do not formally use Quickvpn with all Linux distributions or any Mac OS, we have seen limited success with solutions that allow the use of third party VPN Clients when used in conjunction with our routers.
I'm curious to know whether or not you have explored Shrew Soft VPN Client (a simple Google search will yield results). I'm currently taking a look and to experiment a little bit on my end to see if there is anything we can get to work. If you can, please let me know what you use distribution, what version and a list of all customers third-party vpn that you used.
Personally, I'd love to see the development of a guide that we as support engineers to help all of our Linux-savvy customer.
Thanks for your patience!
Tags: Cisco Support
Similar Questions
-
Please help router and vpn client
Hi all
I want to make a vpn between my PC (with version 4.8.02.0010 of the VPN Client) and a remote router (Cisco 2811) version of the software IOS 12.4 (9) T7 and the following configuration
AAA new-model
!
local VPNCLIENT from AAA authentication login.
local AAA VPNGROUP authorization network
Hello test user name password
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
ISAKMP crypto client configuration group 3000client
key cisco123
DNS 62.42.230.24
domain cisco.com
pool ippool
!
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
!
Crypto-map dynamic dynmap 10
transformation-RIGHT game
!
map clientmap client authentication list of crypto list
crypto isakmp authorization list grupo clientmap map
client configuration address map clientmap crypto answer
10 ipsec-isakmp crypto map clientmap Dynamics dynmap
!
interface FastEthernet0/0
DHCP IP address
NAT outside IP
IP virtual-reassembly
load-interval 30
automatic duplex
automatic speed
clientmap card crypto
!
interface FastEthernet0/0/0
!
interface FastEthernet0/0/1
!
interface FastEthernet0/0/2
!
interface FastEthernet0/0/3
!
interface Vlan1
192.168.4.1 IP address 255.255.255.0
IP nat inside
IP virtual-reassembly
load-interval 30
!
IP local pool ippool 192.168.4.100 192.168.4.200
no ip classless
IP route 0.0.0.0 0.0.0.0 62.43.195.100
!
IP http server
local IP http authentication
no ip http secure server
IP http timeout policy inactive 600 life 86400 request 10000
overload of IP nat inside source list 102 interface FastEthernet0/0
access-list 102 permit ip 192.168.4.0 0.0.0.255 any
!
Line con 0
line to 0
line vty 0 4
privilege level 15
transport telnet entry
line vty 5 15
privilege level 15
transport telnet entry
!
When I connect to the public IP address of the router, that everything is fine and status is connected. But I do not have connectivity to the internet and I can only ping 192.168.4.1, but no other IP address of this beach.
I would be grateful any sort of kelp.
Thank you
You must make sure that your internal traffic goes to the VPN client is NOT be NATT would be.
You need to re - write acl 102 to something like: -.
access-list 102 deny ip 192.168.4.0 0.0.0.255 192.168.4.0 0.0.0.255
access-list 102 permit ip 192.168.4.0 0.0.0.255 any
HTH >
-
Vpn client access to the DMZ host
I'm having a problem where my customers who establish a VPN with Pix 515 cannot access hosts on the DMZ. VPN clients can access hosts inside network without any problems. I discovered that when I make a route to trace from a client computer that has established a VPN connection to a host on the DMZ, he tries to go through the default gateway of computers instead of the client from cisco. Any ideas?
More information:
When a client connects with the PIX over the VPN, it is given the internal DNS servers and the DNS Server internal, we have a host entry that says "www.whatever.com" 2.2.2.2 (this is the DMZ host). Customers within the network can access this host with problems, it's just the customers who establish a VPN connection. But the VPN Clients can access "www.whatever.com" using the public ip address. The problem is that if remove us the entry from the host on the DNS server so that the name of "www.whatever.com" decides the public ip address customers inside will not be able to access the DMZ host. The names and IP numbers are not real just using those as an example.
Any help would be apperciated. Thank you
You'll currently have something like this in your config file:
sheep allowed ip access-list
NAT (inside) 0 access-list sheep
This tells the PIX not to NAT any traffic from inside interface, which is to go to a VPN client. You need the same thing but for the DMZ interface, then add the following:
sheep allowed ip access-list
NAT 0 access-list sheep (dmz)
Who should you get.
-
Another problem with the configuration of Cisco VPN Client access VPN Site2site
We have a Cisco ASA 5505 at our CORP. branch I configured the VPN Site2Site to our COLO with a Juniper SRX220h, to another site works well, but when users access the home Cisco VPN client, they cannot ping or SSH through the Site2Site. JTACS contacted and they said it is not on their end, so I tried to contact Cisco TAC, no support. So here I am today, after for the 3 days (including Friday of last week) of searching the Internet for more than 6 hours per day and try different examples of other users. NO LUCK. The VPN client shows the route secure 10.1.0.0
Sorry to post this, but I'm frustrated and boss breathing down my neck to complete it.
CORP netowrk 192.168.1.0
IP VPN 192.168.12.0 pool
Colo 10.1.0.0 internal ip address
Also, here's an example of my config ASA
: Saved
:
ASA Version 8.2 (1)
!
hostname lwchsasa
names of
name 10.1.0.1 colo
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
backup interface Vlan12
nameif outside_pri
security-level 0
IP 64.20.30.170 255.255.255.248
!
interface Vlan12
nameif backup
security-level 0
IP 173.165.159.241 255.255.255.248
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
switchport access vlan 12
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group network NY
object-network 192.168.100.0 255.255.255.0
BSRO-3387 tcp service object-group
port-object eq 3387
BSRO-3388 tcp service object-group
port-object eq 3388
BSRO-3389 tcp service object-group
EQ port 3389 object
object-group service tcp OpenAtrium
port-object eq 8100
object-group service Proxy tcp
port-object eq 982
VOIP10K - 20K udp service object-group
10000 20000 object-port Beach
the clientvpn object-group network
object-network 192.168.12.0 255.255.255.0
APEX-SSL tcp service object-group
Description of Apex Dashboard Service
port-object eq 8586
object-group network CHS-Colo
object-network 10.1.0.0 255.255.255.0
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.1.0 255.255.255.0
host of the object-Network 64.20.30.170
object-group service DM_INLINE_SERVICE_1
the purpose of the ip service
ICMP service object
service-object icmp traceroute
the purpose of the service tcp - udp eq www
the tcp eq ftp service object
the purpose of the tcp eq ftp service - data
the eq sqlnet tcp service object
EQ-ssh tcp service object
the purpose of the service udp eq www
the eq tftp udp service object
object-group service DM_INLINE_SERVICE_2
the purpose of the ip service
ICMP service object
EQ-ssh tcp service object
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 clientvpn object-group
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo
inside_nat0_outbound list of allowed ip extended access any 192.168.12.0 255.255.255.0
outside_pri_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY
outside_pri_access_in list extended access permit tcp any interface outside_pri eq www
outside_pri_access_in list extended access permit tcp any outside_pri eq https interface
outside_pri_access_in list extended access permit tcp any interface outside_pri eq 8100
outside_pri_access_in list extended access permit tcp any outside_pri eq idle ssh interface
outside_pri_access_in list extended access permit icmp any any echo response
outside_pri_access_in list extended access permit icmp any any source-quench
outside_pri_access_in list extended access allow all unreachable icmp
outside_pri_access_in list extended access permit icmp any one time exceed
outside_pri_access_in list extended access permit tcp any 64.20.30.168 255.255.255.248 eq 8586
levelwingVPN_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
levelwingVPN_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.255.0
outside_pri_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo
backup_nat0_outbound list extended access allowed object-group DM_INLINE_NETWORK_1 192.168.12.0 ip 255.255.255.0
outside_pri_cryptomap_1 list extended access allow DM_INLINE_SERVICE_2 of object-group 192.168.1.0 255.255.255.0 10.1.0.0 255.255.255.0
outside_19_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0
inside_nat0_outbound_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo
VPN-Corp-Colo extended access list permits object-group DM_INLINE_SERVICE_1 192.168.12.0 255.255.255.0 10.1.0.0 255.255.255.0
Note to OUTSIDE-NAT0 NAT0 customer VPN remote site access-list
OUTSIDE-NAT0 192.168.12.0 ip extended access list allow 255.255.255.0 10.1.0.0 255.255.255.0
L2LVPN to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0
pager lines 24
Enable logging
debug logging in buffered memory
exploitation forest asdm warnings
record of the rate-limit unlimited level 4
destination of exports flow inside 192.168.1.1 2055
timeout-rate flow-export model 1
Within 1500 MTU
outside_pri MTU 1500
backup of MTU 1500
local pool LVCHSVPN 192.168.12.100 - 192.168.12.254 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 100 burst-size 5
ICMP allow any inside
ICMP allow any outside_pri
don't allow no asdm history
ARP timeout 14400
NAT-control
interface of global (outside_pri) 1
Global 1 interface (backup)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (outside_pri) 0-list of access OUTSIDE-NAT0
backup_nat0_outbound (backup) NAT 0 access list
static TCP (inside outside_pri) interface https 192.168.1.45 https netmask 255.255.255.255 dns
static TCP (inside outside_pri) interface 192.168.1.45 www www netmask 255.255.255.255 dns
static TCP (inside outside_pri) interface 8586 192.168.1.45 8586 netmask 255.255.255.255 dns
static (inside, inside) tcp interface 8100 192.168.1.45 8100 netmask 255.255.255.255 dns
Access-group outside_pri_access_in in the outside_pri interface
Route 0.0.0.0 outside_pri 0.0.0.0 64.20.30.169 1 track 1
Backup route 0.0.0.0 0.0.0.0 173.165.159.246 254
Timeout xlate 03:00
Conn Timeout 0:00:00 half-closed 0:30:00 udp icmp from 01:00 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 01:00 uauth uauth absolute inactivity from 01:00
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
the ssh LOCAL console AAA authentication
http server enable 981
http 192.168.1.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside_pri
http 0.0.0.0 0.0.0.0 backup
SNMP server group Authentication_Only v3 auth
SNMP-server host inside 192.168.1.47 survey community lwmedia version 2 c
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Sysopt connection tcpmss 1200
monitor SLA 123
type echo protocol ipIcmpEcho 216.59.44.220 interface outside_pri
Annex ALS life monitor 123 to always start-time now
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set esp-3des-sha1 esp-3des esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto ipsec df - bit clear-df outside_pri
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_pri_map 1 match address outside_pri_1_cryptomap
card crypto outside_pri_map 1 set pfs
peer set card crypto outside_pri_map 1 50.75.217.246
card crypto outside_pri_map 1 set of transformation-ESP-AES-256-MD5
card crypto outside_pri_map 2 match address outside_pri_cryptomap
peer set card crypto outside_pri_map 2 216.59.44.220
card crypto outside_pri_map 2 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
86400 seconds, duration of life card crypto outside_pri_map 2 set security-association
card crypto outside_pri_map 3 match address outside_pri_cryptomap_1
peer set card crypto outside_pri_map 3 216.59.44.220
outside_pri_map crypto map 3 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_pri_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
card crypto outside_pri_map interface outside_pri
crypto isakmp identity address
ISAKMP crypto enable outside_pri
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 10
preshared authentication
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
aes-256 encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 50
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
!
track 1 rtr 123 accessibility
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
management-access inside
dhcpd auto_config outside_pri
!
dhcpd address 192.168.1.51 - 192.168.1.245 inside
dhcpd dns 8.8.8.8 8.8.4.4 interface inside
rental contract interface 86400 dhcpd inside
dhcpd field LM inside interface
dhcpd allow inside
!
a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
a statistical threat detection host number rate 2
no statistical threat detection tcp-interception
WebVPN
port 980
allow inside
Select outside_pri
enable SVC
attributes of Group Policy DfltGrpPolicy
VPN-idle-timeout no
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
internal GroupPolicy2 group strategy
attributes of Group Policy GroupPolicy2
Protocol-tunnel-VPN IPSec svc
internal levelwingVPN group policy
attributes of the strategy of group levelwingVPN
Protocol-tunnel-VPN IPSec svc webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list levelwingVPN_splitTunnelAcl
username password encrypted Z74.JN3DGMNlP0H2 privilege 0 aard
aard attribute username
VPN-group-policy levelwingVPN
type of remote access service
rcossentino 4UpCXRA6T2ysRRdE encrypted password username
username rcossentino attributes
VPN-group-policy levelwingVPN
type of remote access service
bcherok evwBWqKKwrlABAUp encrypted password username
username bcherok attributes
VPN-group-policy levelwingVPN
type of remote access service
rscott nIOnWcZCACUWjgaP encrypted password privilege 0 username
rscott username attributes
VPN-group-policy levelwingVPN
sryan 47u/nJvfm6kprQDs password encrypted username
sryan username attributes
VPN-group-policy levelwingVPN
type of nas-prompt service
username, password cbruch a8R5NwL5Cz/LFzRm encrypted privilege 0
username cbruch attributes
VPN-group-policy levelwingVPN
type of remote access service
apellegrino yy2aM21dV/11h7fR password encrypted username
username apellegrino attributes
VPN-group-policy levelwingVPN
type of remote access service
username rtuttle encrypted password privilege 0 79ROD7fRw5C4.l5
username rtuttle attributes
VPN-group-policy levelwingVPN
username privilege 15 encrypted password vJFHerTwBy8dRiyW levelwingadmin
username password nbrothers Amjc/rm5PYhoysB5 encrypted privilege 0
username nbrothers attributes
VPN-group-policy levelwingVPN
clong z.yb0Oc09oP3/mXV encrypted password username
clong attributes username
VPN-group-policy levelwingVPN
type of remote access service
username, password finance 9TxE6jWN/Di4eZ8w encrypted privilege 0
username attributes finance
VPN-group-policy levelwingVPN
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
type of remote access service
IPSec-attributes tunnel-group DefaultL2LGroup
Disable ISAKMP keepalive
tunnel-group 50.75.217.246 type ipsec-l2l
IPSec-attributes tunnel-group 50.75.217.246
pre-shared-key *.
Disable ISAKMP keepalive
type tunnel-group levelwingVPN remote access
tunnel-group levelwingVPN General-attributes
address LVCHSVPN pool
Group Policy - by default-levelwingVPN
levelwingVPN group of tunnel ipsec-attributes
pre-shared-key *.
tunnel-group 216.59.44.221 type ipsec-l2l
IPSec-attributes tunnel-group 216.59.44.221
pre-shared-key *.
tunnel-group 216.59.44.220 type ipsec-l2l
IPSec-attributes tunnel-group 216.59.44.220
pre-shared-key *.
Disable ISAKMP keepalive
!
!
!
Policy-map global_policy
!
context of prompt hostname
Cryptochecksum:ed7f4451c98151b759d24a7d4387935b
: end
Hello
It seems to me that you've covered most of the things.
You however not "said" Configuring VPN L2L that traffic between the pool of VPN and network camp should be in tunnel
outside_pri_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 object-group CHS-Colo
Although naturally the remote end must also the corresponding configurations for users of VPN clients be able to pass traffic to the site of the camp.
-Jouni
-
LAN ASA 5505 VPN client access issue
Hello
I'm no expert in ASA and routing so I ask support the following case.
There is a (running on Windows 7) Cisco VPN client and an ASA5505.
The objectives are client can use the gateway remote on SAA for Skype and able to access devices in SAA within the interface.
The Skype works well, but I can't access devices in the interface inside through a VPN connection.
Can you please check my following config and give me any advice to fix NAT or VPN settings?
ASA Version 7.2 (4)
!
ciscoasa hostname
domain default.domain.invalid
activate wDnglsHo3Tm87.tM encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
interface Vlan3
prior to interface Vlan1
nameif dmz
security-level 50
no ip address
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
DNS server-group DefaultDNS
domain default.domain.invalid
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
inside_access_in list extended access permitted tcp 192.168.1.0 255.255.255.0 any
inside_access_in list extended access permitted udp 192.168.1.0 255.255.255.0 any
outside_access_in list of allowed ip extended access entire 192.168.1.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
local pool VPNPOOL 10.0.0.200 - 10.0.0.220 255.255.255.0 IP mask
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 524.bin
don't allow no asdm history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 1 10.0.0.0 255.255.255.0
NAT (inside) 1 192.168.1.0 255.255.255.0
NAT (outside) 1 10.0.0.0 255.255.255.0
inside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto-map dynamic outside_dyn_map pfs set 20 Group1
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH timeout 5
SSH version 2
Console timeout 0
dhcpd outside auto_config
!
dhcpd address 192.168.1.2 - 192.168.1.33 inside
dhcpd dns xx.xx.xx.xx interface inside
dhcpd allow inside
!
attributes of Group Policy DfltGrpPolicy
No banner
WINS server no
value of server DNS 84.2.44.1
DHCP-network-scope no
VPN-access-hour no
VPN - connections 3
VPN-idle-timeout 30
VPN-session-timeout no
VPN-filter no
Protocol-tunnel-VPN IPSec l2tp ipsec webvpn
disable the password-storage
disable the IP-comp
Re-xauth disable
Group-lock no
disable the PFS
IPSec-udp disable
IPSec-udp-port 10000
Split-tunnel-policy tunnelall
Split-tunnel-network-list no
by default no
Split-dns no
Disable dhcp Intercept 255.255.255.255
disable secure authentication unit
disable authentication of the user
user-authentication-idle-timeout 30
disable the IP-phone-bypass
disable the leap-bypass
allow to NEM
Dungeon-client-config backup servers
MSIE proxy server no
MSIE-proxy method non - change
Internet Explorer proxy except list - no
Disable Internet Explorer-proxy local-bypass
disable the NAC
NAC-sq-period 300
NAC-reval-period 36000
NAC-by default-acl no
address pools no
enable Smartcard-Removal-disconnect
the firewall client no
rule of access-client-none
WebVPN
url-entry functions
HTML-content-filter none
Home page no
4 Keep-alive-ignore
gzip http-comp
no filter
list of URLS no
value of customization DfltCustomization
port - forward, no
port-forward-name value access to applications
SSO-Server no
value of deny message connection succeeded, but because some criteria have not been met, or because of a specific group policy, you are not allowed to use the VPN features. Contact your administrator for more information
SVC no
SVC Dungeon-Installer installed
SVC keepalive no
generate a new key SVC time no
method to generate a new key of SVC no
client of dpd-interval SVC no
dpd-interval SVC bridge no
deflate compression of SVC
internal group XXXXXX strategy
attributes of XXXXXX group policy
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelall
Split-tunnel-network-list no
XXXXXX G910DDfbV7mNprdR encrypted privilege 15 password username
username password encrypted XXXXXX privilege 0 5p9CbIe7WdF8GZF8
attributes of username XXXXXX
Strategy Group-VPN-XXXXXX
username privilege 15 encrypted password cRQbJhC92XjdFQvb XXXXX
tunnel-group XXXXXX type ipsec-ra
attributes global-tunnel-group XXXXXX
address VPNPOOL pool
Group Policy - by default-XXXXXX
tunnel-group ipsec-attributes XXXXXX
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:a8fbb51b0a830a4ae823826b28767f23
: end
ciscoasa #.
Thanks in advance!
fbela
config #no nat (inside) 1 10.0.0.0 255.255.255.0< this="" is="" not="">
Add - config #same-Security-permit intra-interface
#access - extended list allowed sheep ip 192.168.1.0 255.255.255.0 10.0.0.0 255.255.255.0
#nat (inside) 0 access-list sheep
Please add and test it.
Thank you
Ajay
-
Router and VPN Client for Internet Public on a matter of stick
I try to follow the http://www.cisco.com/en/US/products/sw/secursw/ps2308/products_configuration_example09186a008073b06b.shtml to allow VPN clients to receive their internet connection instead of tunneling while split. Internal resources are available, but the internet does not work when a client is connected? It seems that the VPN clients are not translated.
!
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
crypto ISAKMP policy 10
preshared authentication
ISAKMP crypto key address x.x.x.x No.-xauth KeyString
!
ISAKMP crypto group customer VPN-users configuration
KeyString key
DNS 208.67.222.222 208.67.220.220
domain domain.com
pool VPN_POOL
include-local-lan
netmask 255.255.255.0
Crypto isakmp IKE-PROFILE profile
game of identity VPN-users group
client authentication list default
Default ISAKMP authorization list
initiate client configuration address
client configuration address respond
virtual-model 1
!
!
Crypto ipsec transform-set ESP-SHA-3DES esp - aes 256 esp-sha-hmac
!
Profile of crypto ipsec IPSEC_PROFILE1
game of transformation-ESP-3DES-SHA
Isakmp IKE PROFILE set
!
!
crypto dynamic-map 10 DYNMAP
game of transformation-ESP-3DES-SHA
market arriere-route
!
!
map CLIENTMAP client to authenticate crypto list by default
map CLIENTMAP isakmp authorization list by default crypto
crypto map CLIENTMAP client configuration address respond
map CLIENTMAP 1 ipsec-isakmp crypto
defined peer x.x.x.x
game of transformation-ESP-3DES-SHA
PFS Group1 Set
match address 100
map CLIENTMAP 10-isakmp dynamic DYNMAP ipsec crypto
!
Archives
The config log
hidekeys
!
!
controller T1 2/0
framing sf
friend linecode
!
property intellectual ssh authentication-2 retries
!
!
!
!
interface Loopback0
IP 192.168.100.1 address 255.255.255.0
no ip unreachable
IP nat inside
IP virtual-reassembly
!
!
Null0 interface
no ip unreachable
!
interface FastEthernet0/0
Description $ETH - WAN$ $FW_OUTSIDE$
IP address dhcp customer_id FastEthernet0/0 hostname 3725router
IP access-group 104 to
no ip unreachable
NAT outside IP
inspect the SDM_LOW over IP
sdm_ips_rule IP IP addresses in
IP virtual-reassembly
route SDM_RMAP_1 card intellectual property policy
automatic duplex
automatic speed
map CLIENTMAP crypto
!
interface Serial0/0
Description $FW_OUTSIDE$
the IP 10.0.0.1 255.255.240.0
IP access-group 105 to
Check IP unicast reverse path
no ip unreachable
inspect the SDM_LOW over IP
IP virtual-reassembly
Shutdown
2000000 clock frequency
map CLIENTMAP crypto
!
interface FastEthernet0/1
no ip address
no ip unreachable
IP virtual-reassembly
automatic speed
full-duplex
!
interface FastEthernet0/1.2
Description $FW_INSIDE$
encapsulation dot1Q 2
172.16.2.1 IP address 255.255.255.0
IP access-group 101 in
no ip unreachable
IP nat inside
IP virtual-reassembly
enable IPv6
!
interface FastEthernet0/1.3
Description $FW_INSIDE$
encapsulation dot1Q 3
172.16.3.1 IP address 255.255.255.0
IP access-group 102 to
no ip unreachable
IP nat inside
IP virtual-reassembly
enable IPv6
!
interface FastEthernet0/1.10
Description Vlan wireless comments
encapsulation dot1Q 100
172.16.100.1 IP address 255.255.255.0
IP access-group out 110
no ip unreachable
IP nat inside
IP virtual-reassembly
!
interface FastEthernet0/1.50
Description $Phones$
encapsulation dot1Q 50
IP 172.16.50.1 255.255.255.0
IP virtual-reassembly
!
interface Serial0/1
no ip address
no ip unreachable
Shutdown
2000000 clock frequency
!
interface Serial0/2
no ip address
Shutdown
!
interface Serial0/3
no ip address
Shutdown
!
interface Serial1/0
no ip address
Shutdown
!
BRI2/0 interface
no ip address
IP virtual-reassembly
encapsulation hdlc
Shutdown
!
type of interface virtual-Template1 tunnel
Description $FW_INSIDE$
IP unnumbered Loopback0
IP access-group 103 to
no ip unreachable
IP virtual-reassembly
ipv4 ipsec tunnel mode
Tunnel IPSEC_PROFILE1 ipsec protection profile
!
local IP 192.168.0.100 VPN_POOL pool 192.168.0.105
IP forward-Protocol ND
IP route 172.16.200.0 255.255.255.252 172.16.2.3
!
!
IP http server
local IP http authentication
IP http secure server
IP http timeout policy inactive 600 life 86400 request 10000
translation of nat IP udp-timeout 900
IP nat inside source map route SDM_RMAP_1 interface FastEthernet0/0 overload
!
logging source hostname id
record 172.16.3.3
access-list 100 permit ip 172.16.2.0 0.0.0.255 172.16.10.0 0.0.0.255
access-list 100 permit ip 172.16.2.0 0.0.0.255 172.31.12.0 0.0.0.255
Remark SDM_ACL category of access list 101 = 17
access-list 101 permit ahp any host 172.16.2.1
access-list 101 permit esp any host 172.16.2.1
access-list 101 permit udp any host 172.16.2.1 eq isakmp
access-list 101 permit udp any host 172.16.2.1 eq non500-isakmp
access-list 101 permit ip 172.31.12.0 0.0.0.255 172.16.2.0 0.0.0.255
access-list 101 deny ip 10.0.0.0 0.0.15.255 no matter what newspaper
access-list 101 deny ip 192.168.0.0 0.0.0.255 any what newspaper
access-list 101 deny ip 172.16.3.0 0.0.0.255 any what newspaper
access-list 101 deny ip 255.255.255.255 host no matter what paper
access-list 101 deny ip 127.0.0.0 0.255.255.255 any what newspaper
access-list 101 tcp refuse any any newspaper of chargen Place1
access-list 101 tcp refuse any any eq whois newspaper
access-list 101 tcp refuse any any eq 93 newspaper
access-list 101 tcp refuse any any newspaper of the 135 139 range
access-list 101 tcp refuse any any eq 445 newspaper
access-list 101 tcp refuse any any newspaper exec 518 range
access-list 101 tcp refuse any any eq uucp log
access list 101 ip allow a whole
access-list 101 deny ip 172.16.100.0 0.0.0.255 any what newspaper
access-list 102 deny ip 172.16.2.0 0.0.0.255 any what newspaper
access-list 102 deny ip 10.0.0.0 0.0.15.255 no matter what newspaper
access-list 102 deny ip 192.168.0.0 0.0.0.255 any what newspaper
access-list 102 refuse host 255.255.255.255 ip no matter what paper
access-list 102 deny ip 127.0.0.0 0.255.255.255 any what newspaper
access ip-list 102 permit a whole
access-list 103 deny ip 172.16.2.0 0.0.0.255 any
access-list 103 deny ip 10.0.0.0 0.0.15.255 everything
access-list 103 deny ip 172.16.3.0 0.0.0.255 any
access-list 103 refuse host ip 255.255.255.255 everything
access-list 103 deny ip 127.0.0.0 0.255.255.255 everything
103 ip access list allow a whole
Note access-list 104 SDM_ACL category = 17
access-list 104 allow the host ip 192.168.0.100 everything
access-list 104 allow the host ip 192.168.0.101 everything
access-list 104 allow the host ip 192.168.0.102 everything
access-list 104 allow the host ip 192.168.0.103 everything
104 allow host 192.168.0.104 ip access-list all
access-list 104 allow the host ip 192.168.0.105 everything
access-list 104. allow ip 172.16.10.0 0.0.0.255 172.16.2.0 0.0.0.255
access-list 104 allow host ip 192.168.0.100 172.16.0.0 0.0.255.255
access-list 104 allow host 192.168.0.101 ip 172.16.0.0 0.0.255.255
access-list 104 allow host 192.168.0.102 ip 172.16.0.0 0.0.255.255
access-list 104 allow host ip 192.168.0.103 172.16.0.0 0.0.255.255
access-list 104 allow host 192.168.0.104 ip 172.16.0.0 0.0.255.255
access-list 104 allow host ip 192.168.0.105 172.16.0.0 0.0.255.255
access-list 104. allow ip 172.31.12.0 0.0.0.255 172.16.2.0 0.0.0.255
access-list 104 permit udp host 205.152.132.23 eq field all
access-list 104 permit udp host 205.152.144.23 eq field all
Access-list 104 remark Auto generated by SDM for NTP 129.6.15.29 (123)
access-list 104 permit udp host 129.6.15.29 eq ntp ntp any eq
access-list allow 104 of the ahp an entire
access-list 104 allow esp a whole
access-list allow 104 a 41
access-list 104 permit udp any any eq isakmp
access-list 104 permit udp any any eq non500-isakmp
access-list 104 deny ip 10.0.0.0 0.0.15.255 no matter what newspaper
access-list 104 deny ip 172.16.2.0 0.0.0.255 any what newspaper
access-list 104 deny ip 192.168.0.0 0.0.0.255 any what newspaper
access-list 104 deny ip 172.16.3.0 0.0.0.255 any what newspaper
access-list 104 permit udp any eq bootps any eq bootpc
access-list 104 permit icmp any any echo response
access-list 104 permit icmp any one time exceed
access-list 104 allow all unreachable icmp
access-list 104 permit icmp any any echo
access-list 104 refuse icmp any any newspaper mask-request
access-list 104 refuse icmp any any redirect newspaper
access-list 104 deny ip 10.0.0.0 0.255.255.255 any what newspaper
access-list 104 deny ip 172.16.0.0 0.15.255.255 no matter what newspaper
access-list 104 deny ip 192.168.0.0 0.0.255.255 any what newspaper
access-list 104 deny ip 127.0.0.0 0.255.255.255 any what newspaper
104 refuse 224.0.0.0 ip access-list 15.255.255.255 no matter what newspaper
104 refuse host 255.255.255.255 ip access-list no matter what paper
access-list 104 tcp refuse any any newspaper of the range 6000-6063
access-list 104 tcp refuse any any eq newspaper 6667
access-list 104 tcp refuse any any 12345 12346 range journal
access-list 104 tcp refuse any any eq 31337 newspaper
access-list 104 deny udp any any eq 2049 newspaper
access-list 104 deny udp any any eq 31337 newspaper
access-list 104 deny udp any any 33400 34400 range journal
access-list 104 deny ip any any newspaper
Note access-list 105 SDM_ACL category = 17
access-list 105 allow the host ip 192.168.0.100 everything
access-list 105 allow the host ip 192.168.0.101 everything
access-list 105 allow the host ip 192.168.0.102 everything
access-list 105 allow the host ip 192.168.0.103 everything
access-list 105 192.168.0.104 ip host allow all
access-list 105 allow the host ip 192.168.0.105 everything
access-list 105 host ip 192.168.0.100 permit 172.16.0.0 0.0.255.255
access-list 105 host ip 192.168.0.101 permit 172.16.0.0 0.0.255.255
access-list 105 host ip 192.168.0.102 permit 172.16.0.0 0.0.255.255
access-list 105 host ip 192.168.0.103 permit 172.16.0.0 0.0.255.255
access-list 105 192.168.0.104 ip host permit 172.16.0.0 0.0.255.255
access-list 105 host ip 192.168.0.105 permit 172.16.0.0 0.0.255.255
access-list 105 allow ip 172.31.12.0 0.0.0.255 172.16.2.0 0.0.0.255
access-list 105 permit udp any host 10.0.0.1 eq non500-isakmp
access-list 105 permit udp any host 10.0.0.1 eq isakmp
access-list 105 allow esp any host 10.0.0.1
access-list 105 allow ahp any host 10.0.0.1
access-list 105 permit udp host 129.6.15.29 eq ntp host 10.0.0.1 eq ntp
access-list 105 allow ahp 10.0.0.2 10.0.0.1 host
access-list 105 allow esp 10.0.0.2 10.0.0.1 host
access-list 105 permit udp host 10.0.0.2 10.0.0.1 host eq isakmp
access-list 105 permit udp host 10.0.0.2 10.0.0.1 host eq non500-isakmp
access-list 105 allow ip 172.16.10.0 0.0.0.255 172.16.2.0 0.0.0.255
access-list 105 permit udp host 10.0.0.2 host 172.16.2.10 eq tftp
access-list 105 permit udp host 10.0.0.2 host 172.16.2.5 eq syslog
access-list 105 deny ip 172.16.2.0 0.0.0.255 any
access-list 105 deny ip 192.168.0.0 0.0.0.255 any
access-list 105 deny ip 172.16.3.0 0.0.0.255 any
access-list 105 permit icmp any host 10.0.0.1 echo-reply
access-list 105 permit icmp any host 10.0.0.1 exceeded the time
access-list 105 permit icmp any host 10.0.0.1 inaccessible
access-list 105 deny ip 10.0.0.0 0.255.255.255 everything
access-list 105 deny ip 172.16.0.0 0.15.255.255 all
access-list 105 deny ip 192.168.0.0 0.0.255.255 everything
access-list 105 deny ip 127.0.0.0 0.255.255.255 everything
105 refuse host 255.255.255.255 ip access-list all
access-list 105 refuse host ip 0.0.0.0 everything
access-list 105 deny ip any any newspaper
access-list 110 deny ip 172.16.2.0 0.0.0.255 any
access-list 110 deny ip 172.16.3.0 0.0.0.255 any
access ip-list 110 permit a whole
access-list 115 permit ip 172.16.0.0 0.0.255.255 everything
access-list 115 permit ip 192.168.0.0 0.0.0.255 any
access-list 120 deny ip 172.16.0.0 0.0.255.255 192.168.0.0 0.0.0.255
access-list 120 allow ip 172.16.0.0 0.0.255.255 everything
access-list 150 deny ip 172.16.0.0 0.0.255.255 host 192.168.0.100
access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.101
access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.102
access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.103
access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.104
access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.105
access-list 150 deny ip 172.16.2.0 0.0.0.255 172.31.12.0 0.0.0.255
access-list 150 permit ip 172.16.2.0 0.0.0.255 any
access-list 150 permit ip 172.16.3.0 0.0.0.255 any
access-list 150 permit ip 192.168.0.0 0.0.0.255 any
public RO SNMP-server community
IPv6 route: / 0 Tunnel0
!
!
!
allowed SDM_RMAP_1 1 route map
corresponds to the IP 150
set ip next-hop 192.168.100.2
!
SDM_RMAP_1 allowed 10 route map
corresponds to the IP 150
set ip next-hop 192.168.100.2Based on my own tests in the laboratory, you can do this with and without a routing policy. You can configure the road of politics on the virtual template interface and direct traffic to the closure where ip nat inside is enabled, or you can simply configure ip nat inside on the interface of virtual model and remove the routing strategy.
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2ISAKMP crypto cisco123 key address 0.0.0.0 0.0.0.0
ISAKMP crypto group customer VPN-users configuration
key cisco123
DNS 208.67.222.222 208.67.220.220
domain domain.com
pool VPN_POOL
include-local-lan
netmask 255.255.255.0
Crypto isakmp IKE-PROFILE profile
game of identity VPN-users group
client authentication list default
Default ISAKMP authorization list
initiate client configuration address
client configuration address respond
virtual-model 1Crypto ipsec transform-set ESP-SHA-3DES esp - aes 256 esp-sha-hmac
Profile of crypto ipsec IPSEC_PROFILE1
game of transformation-ESP-3DES-SHA
Isakmp IKE PROFILE setcrypto dynamic-map 10 DYNMAP
game of transformation-ESP-3DES-SHA
market arriere-route
!
!
map CLIENTMAP 10-isakmp dynamic DYNMAP ipsec cryptointerface GigabitEthernet0/0
IP 1.1.1.1 255.255.255.0
NAT outside IP
IP virtual-reassembly
automatic duplex
automatic speed
media type rj45
map CLIENTMAP cryptotype of interface virtual-Template1 tunnel
IP unnumbered GigabitEthernet0/0
IP nat inside
IP virtual-reassembly
ipv4 ipsec tunnel mode
Tunnel IPSEC_PROFILE1 ipsec protection profilelocal IP 192.168.0.100 VPN_POOL pool 192.168.0.105
overload of IP nat inside source list 150 interface GigabitEthernet0/0
access-list 150 deny ip 172.16.0.0 0.0.255.255 host 192.168.0.100
access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.101
access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.102
access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.103
access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.104
access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.105
access-list 150 deny ip 172.16.2.0 0.0.0.255 172.31.12.0 0.0.0.255
access-list 150 permit ip 172.16.2.0 0.0.0.255 any
access-list 150 permit ip 172.16.3.0 0.0.0.255 any
access-list 150 permit ip 192.168.0.0 0.0.0.255 any***************************************************************************************
Inside global internal local outside global local outdoor Pro
ICMP 1.1.1.1:1 192.168.0.102:1 4.2.2.2:1 4.2.2.2:1 -
6500 IOS router Cisco VPN Client using DHCP no Pool of IP
Hey guys,.
I have a little trouble trying to get my vpn client to use a dhcp server rather than the pool of intellectual property. When I use the command IP pool everything works fine, but when I use the dhcp command I get an error on the client-side saying that no address private IP was affected by the peer.
Here is my config.
connection of AAA VPNCLIENT_AUTHEN group local RADIUS authentication
local VPNCLIENT_AUTHOR AAA authorization network
Configuration group customer isakmp crypto VPNCLIENT_GROUP
xxxxxxxxxxxxxxxxxxxxxxxxxx key
DNS 172.25.128.43 172.25.65.43
win 172.25.1.54
sktnhr.ca field
172.25.0.27 DHCP server
GIADDR DHCP 172.25.205.1
DHCP timeout 10
pool # VPNCLIENT_IPPOOL
Crypto isakmp ISAKMP_PROFILE profile
VRF HUB_VRF
match of group identity VPNCLIENT_GROUP
list of authentication of client VPNCLIENT_AUTHEN
VPNCLIENT_AUTHOR of ISAKMP authorization list.
client configuration address respond
crypto dynamic-map DYN_MAP 1020
game of transformation-ESP-AES-256-SHA
ISAKMP_PROFILE Set isakmp-profile
market arriere-route
card crypto HUB_CRYPTO_MAP 6005-isakmp dynamic ipsec DYN_MAP
local IP VPNCLIENT_IPPOOL 172.25.205.25 pool 172.25.205.250
I can see the dhcp request and offer on my dhcp server but nothing is for the customer. When I use a pool I ping the dhcp server, which makes me think the roads are okay. Anyone has any ideas.
You need the giaddr in an EasyVPN server configuration. Try adding looping to your switch and test it again. If you use an iVRF, make sure that the closure is in the VRF and the interface to the server.
-
I have install a plate rotating and spoke VPN with communication between the rays, the hub is also able to receive connections from VPN clients using the client VPN Cisco.
Is there a a way to allow communication to the rays using just the VPN Client connection to the hub?
Static IP Hub / DMVPN IP 10.0.0.1 / 192.168.1.0 LAN
Spoke 1 Dynamic Ip / 10.0.0.2 DMVPN IP / LAN 192.168.5.0
Spoke an IP Dynamics 2 / DMVPN IP 10.0.0.3 / 192.168.4.0 LAN
Spoke an IP Dynamics 3 / 10.0.0.4 DMVPN IP / LAN 192.168.2.0
The tunnels are running with the communication between the spokes.
No matter what pointer is welcomed more of
Thank you
Hello
To get this working, you need to add pool VPN client to your ACL cryto on each of the rays.
For example, if your pool is 192.168.6.0 on RADIUS 1, you must add 192.168.5.0 to 192.168.6.0 permits.
Also make sure you add denys corresponding in the NAT ACL of rays if you NAT. also if you use split tunneling for VPN clients you need to all your subnets of rays in this ACL too. If you do not use the split tunneling, then you should not need to add anything on the client configuration.
I hope this helps.
Luis Raga
-
Internet via Tunnel VPN Client Access
Hello
We use the Cisco VPN Client to connect to our router CISCO1921 and want to go out again on the same interface to the internet. We have set up the connection with scurity IOS package, have no split tunneling - then the customer is obliged with its default gateway to our router - also, we pushed our local dns server on the client and he gets the results of dns. Now, I think we need is out with some sort of NAT, because our client has a private IP address of the IPSec Client pool. For the moment we have no NAT inside/outside, because we only use official IP address in - and outside (use of the data room).
-Is it possible to get the NAT function passes to the same entry with crypto_map IPSec user interface and out to the internet?
-It is safer for this set up with vrf?
-Some has a link to example of it configurations?
Thank you!
NISITNETC
Hello
For building you have to create the political map and the loopback interface, have you come across this link below?, follow the example in this link.
Concerning
-
Installation of VM with VPN client access to the network local provents
What is the best approach for the connection to the VPN in the following scenario?
We want to install VM for our projects as VPN client networking (using the cisco vpn client). In many cases the VPN profile that is configured by the client is configured to prevent access to the local network, but rather the tunnels all through the VPN.
I tried the NAT and Bridged networks and once you connect to the VPN client, the conectitivy of the virtual machine is limited to the VMWare console. SSH and other connections no longer work.
Thanks for any idea.
I'd VNC - that's what I use for a VM XP that uses the client VPN SecuRemote CheckPoint blocking the same way (wisely) off incoming traffic when the connection is made to the other end of the VPN.
Just paste lines similar to the following in your .vmx file when the virtual machine is shut down:
RemoteDisplay.vnc.enabled = TRUE
RemoteDisplay.vnc.port = '5910 '.
RemoteDisplay.vnc.password = 'somepassword '.
RemoteDisplay.vnc.keymap = 'uk '.Note that you point your VNC client software on the IP address (and port of your .vmx file) to your server 2.0, not the virtual machine host. Use a different port for each computer virtual you need simultaneous to access.
-
RV042 VPN group &; access rules
I have install a GroupVPN and connect to the RV042 with the client VPN Shrewsoft, works like a charm as opposed to QuickVPN ;-)
The firewall is configured with an explicit deny for RDP access rule to an internal server, can also be used to explicitly a rule is created for certain numbers of IP as a source. I noticed that I need to create an explicit allow rule for the subnet of the client Shrewsoft is using the virtual adapter or I won't be able to access the internal server via RDP through the tunnel of GroupVPN.
Is it normal? I think that establishing a tunnel defies the rules created for a direct access to the WAN port.
Peter
Sorry, I got my signals crossed with my previous suggestion. Your answer has cleared up my misunderstanding. My rule was for a different purpose and it does not work for your situation, I thought it would be.
redirect port (UPnP or redirection) replaced the firewall rules, but does not completely bypass their. He must work around the default rules for work, but don't not past rules customized. The trick is to know the translation of transfer goes first, then when it is processed by the firewall, the destination is the IP and the port internal. In addition, it would seem that VPN works the same way - allows to bypass default firewall but not custom rules.
Since you want to double your security and have a non-standard port MORE limit access to specific IPs through the rules of firewall, then you are set up correctly.
The VPN to bypass the firewall completely? Maybe, but then you wouldn't have the opportunity to clients VPN filter with custom (without a separate section in Firewall VPN) rules. Given that you have created a custom block rule, you must add an allow rule for everything that comes through the WAN (same VPN) port. I agree it's annoying, but that's just the way the program is written.
I didn't test the VPN rules, but I think you can handle this - the only variable would be you allow the public IP address of the remote network or remote LAN subnet range? I expect the LAN subnet.
----------------------
Other thoughts - I personally just use the non-standard port and leave the RDP Security to take care of himself. My clients are very small, so the exposure and risk are fairly low. For a client of profile higher or more secure, I would either put everything inside a VPN connection, or configure as you. Of course, if the security is so important, maybe you should be on a more expensive (and capable) device?
-
Certificate self-signed for remote VPN CLIENT access
Hi people,
I am trying to achieve two-factor authentication, first with RADIUS & 2nd with self-signed certificate. If I generated of self-signed certificate & trying to import this certificate but error 39 that occur. Only obstacle that authenticate with certificate. I saw some documents for separate setting certifcate servers (CA) & then to import in the clients but I m curious about a certificate automatically generated can be used to authenticate the remote access client.
ASA additional server failover mode is Local CA is not supported. Is there a way to support local CA.
Thank you
Are you talking about using self-signed client certificates? I guess that it will not work. At least it is not scalable. You must use an internal CA for this task. As the local certification authority cannot be used with failover, you can take a Windows Server 2 k 3 or 2 k 8. Another option is to use a router IOS as CA-server. But what take something else as a second factor? I'm a big fan of the use of smartphones with the www.duosecurity.com service.
--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni -
Client connections from linux on Solaris failing DB server
Hello
I get the following error when I connect from my client (Linux x86_64) with oracle client box 11.1 installed on my Solaris-SPARC DB server that has an installed oracle 11.2
ORA-12520: TNS:listener could not find Manager available for requested type
Server
I checked a lot of things online. They all said.
1 check your service Listner
The listening service seems to be very well because I ca connect using the listner of my box Solaris SPARC local as well as another Soalris SPARC box that has a client for oracle 10 g
2. the process boundary must have been saturated.
However, this isn't the case either I checked the view v$ resources limited and confirmed, I have also increased the number of processes
However when I do a TNSPING to my linux box using the name of the DB to Solaris, I am able to get a ping successfully.
I need your help to fix it.
I guess the Oracle client and DB server can be on a heterogeneous distributed system?
Kind regards
ValliHello
Remove the server = shared your tnsnames.ora line that's the problem.See you soon,.
Harry -
VPN client with counterpart on secondary ip address on the public interface of the router
Hello
On our office LAN, we have a Linux server than it hosting a VPN connection to a remote client.
Do this to ISAKMP card on our Cisco router port connections to the internal ip address of the Linux host.
However, we now want to allow our users to establish VPN connections to our local network using the unit of Cisco VPN Client.
Of course, this would present challenges, as the ISAKMP our router port is mapped through an internal host.
So, we tried to set up a secondary ip address on the router and VPN clients to connect to that.
What we see in our newspapers is as follows:
Phase 1 is very well established, and the VPN Client prompts the user for a user name and password.
Authentication of the phase 2 starts, but the router says it's is not to receive a proposal of hash of the client.
185 12:18:06.943 09/03/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">(in this case, where x.x.x.x is the secondary ip address on the public interface)
After that, the Phase 1 SA is removed and the connection fails.
My understanding is that the Phase 2 negotiation takes place with the ip address assigned to the client in Phase 1, which suggests that the problem occurs because the client communicates with the main on the interface ip address, and no secondary ip address.
When remove us the mapping of port isakmp and the VPN client to connect to the primary ip address, everything works fine.
Question:
It is possible to establish 2 router VPN Client uses a secondary ip address?
If not, is there some way I can implement the port mapping so that it occurs, the connection comes from a specific ip address?
Garreth
Should be supported on IOS.
The command is crypto ctcp port...
Check this link:
Federico.
-
Need help with native VPN client for Mac to the Configuration of the VPN router RV082
Guys,
I am trying to set up router RV082 VPN Client with native Mac for my remote access. However, no matter what I did, I'm not able to make works. Can any give me an example of how to set my router RV082 and Mac Book Pro (Mountain Lion)?
Thank you
Hi Jixian, the native client MAC does not work. The IPSEC VPN client is the same as the 5.x Cisco VPN client is not supported on this device.
Your alternatives are to use PPTP or a 3rd party IPsec client such as ipsecuritas.
-Tom
Please evaluate the useful messages
Maybe you are looking for
-
HP Laser Jet MFP M127fn Pro: How to send a fax using speed dial?
I have a new HP Laser Jet MFP M127fn Pro: how to send a fax using speed dial, I entered already numbers in the address book.
-
i.ve a windows xp uilimate Edition but also still install windows media Center on my pc... When I try an go to the microsoft update website... It checks the 2 up date hardwear and softwear... then tells me 2 audit this copy of windows... after I get
-
Can you download OLDER versions of firmware site Web of Cisco?
Hello You just bought a Linksys E2000 to replace a golden oldie Linksys BEFW11S4 Wireless-B. Yep, Wireless-B, a little outdated. Happy to say that the E2000 works very well and is a significant improvement. Question: my E2000 has firmware version 1.
-
Hello, I always used Lavasoft Adaware free with my XP home. Now when I try to use it to scan my computer for loading window comes but Adaware never loads. There's just loading. I uninstalled and then reinstalled the program, but that did not help.
-
Synchonizing of Smartphones blackBerry - no Photos found photos
I have BB Desktop Software Bundle V5 1626 and have failed for the last 2 versions to synchronize my photos of the device memory or the memory card. When I click on Media Sync/photos it shows no pictures at all. I read that it is suggested to revert t