Router w / Tunnel dynamic L2L and Clients VPN

I have a 7200 router currently configured w / vpn clients. I'm looking to add a tunnel dynamic l2l. When I do, I am more able to connect using the vpn client. I following the configuration the following URL.

http://Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a00801dddbb.shtml

As soon as I add...

Crypto-map dynamic dynmap 5

Define VPNclient isakmp-profile

the vpn client no longer works. Have not access to the config right now as I took it. Someone at - it it works correctly?

Okay, mhhh I think that this is a problem with the configuration, give a shot at one of the L2L bouncing, set it to the profile and the keychain, which is the result.

Tags: Cisco Security

Similar Questions

PIX - PIX VPN and Client VPN - cannot access core network

I hub and spoke PIX and a VPN Client that connects to speak it PIX, much the same as the example configuration here: -.

http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00800948b8.shtml

This example shows the client VPN access to the network behind PIX RADIUS. I want the client to also be able to access the central network, i.e. the client connects to the pix speaks via vpn, and traffic is routed through the vpn to PIX - PIX to the central site.

How this would change the configuration contained in the example?

See you soon,.

Jon

You can not do this, the PIX cannot route a package back on the same interface, it is entered in the. The only way to do that is to have the client connect to the hub PIX, but then they would not be able to get to the network behind PIX distance either.

Or that the customer would connect on a different interface in the PIX of distance, but this would mean another connection ISP on this PIX. Example of config is here: http://www.cisco.com/warp/public/110/client-pixhub.html

WAN with 3 routers RV320 and client VPN routing

We have 3 locations with routers RV320 - WAN1/LAN1-192.168.10.0, WAN2/LAN2-192.168.20.0, WAN3/LAN3-192.168.30.0. Locations are connected via VPN and users in each office can be connected to others.
I connect to the Home Office with Cisco VPN Client. When I connect via VPN to the office '1' and then I get the 192.168.12.0 network address and I can ping network 192.168.10.0 and connect to servers on the network. Unfortunately I can not connect to other networks (from offices '2' and '3'). What should I set on routers? Static routes? How?

Thanks in advance

Adam

Hello Adam,.

Looks like you have the Cisco VPN Client configured in shared tunnel mode. In this mode the traffic associated with the specific network specified in the configuration of the tunnel will be sent through the tunnel, all the rest just use your normal internet connection. However, you can change this in the configuration of 320 to a full tunnel. All your traffic will then be sent through the tunnel, and the RV should just drive through the tunnel from site to site, suitable for any office network you want to reach.

Note, however, that this will send all your traffic, including any web browsing and nothing else happening on your PC, through the connection of the VPN Client. This isn't necessarily a bad thing, I just wanted you to be aware of it.

Hope that helps and thanks for using Cisco,

Christopher Ebert - Advanced Network Support Engineer

Cisco Small Business Support Center

* Please note the useful messages *.

Client VPN router IOS, and site to site vpn

Hello

Im trying to configure a vpn client access to an ios router that already has a vpn site-to site running. I don't see how the two can run on the same router.

So I guess my question is is it possible? and if anyone has therefore had a config that they can share or a useful link.

IM using a router 800 series with 12.4 ios

Thank you very much

Colin
```
ReadersUK wrote:
Hi
Im trying to configure access for a vpn client to a ios router that already has a site to site vpn running. I cant see how both can be running on the same router.
So i guess my question is can this be done? and if so has anyone got a config they can share or a useful link.
im using a 800 series router with 12.4 ios
Many thanks
Colin
```
Colin

It can be done. Look at this config example that shows a router configured with a site to site VPN and client vpn - connection

https://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a0080094685.shtml

Jon

Problem with VPN L2L and RA in a failover configuration

I use two ASA 5540 in failover active-standby configuration. These boxes (primary and secondary) are used to establish some L2L and VPN RA (remote access). The active area run the OSPF process.

The problem is when the failover (blocking just to the bottom of the active area, or "active failover" running in a secondary zone) all L2L be restored in a secondary zone. The only way I can do this (re-connect) removes the configuration of IPP (Reverse injectable way) (for example. ("no card crypto rprbbe_map 3 don't set reverse-road") and the configuration of IPP ("card crypto rprbbe_map 3 Road opposite the value"). After this the connection is re-established.

In RA guests the session persists on a failover event, but the customer loses access. To resolve this problem, the customer needs to disconnect and reconnect.

Anyone has any experience with this kind of (L2L and RA) VPN configuration using failover?

Behavior seems buggy.

What version do you use?

Client VPN does not install

Greetings,

Try to install the VPN clinet version 5.0.07.0290 on WinXP box.

Gets to a certain point then - error

Error 27850. Unable to manage the network components.

The corruption of the operating system can prevent installation.

I asked this question here before - and received responses instructioning me to uninstall the client.

This canoe do since there is no element installed in Add / Remove programs to point to uninstall. I deleted the folder created, but it makes no difference - each time the system stops at the same point.

Any other ideas?

Is your Windows XP 32-bit or 64-bit?

There are 2 version of VPN Client 5.0.07.0290:

32-bit: vpnclient-win-msi - 5.0.07.0290 - k9.exe

64-bit: vpnclient-winx64-msi - 5.0.07.0290 - k9.exe

Please, please make sure you use the right software.

Here are the steps that will allow the uninstall:

(1) remove the VPN Client (any version) of the machine using the MSI cleanup tool
http://support.Microsoft.com/kb/290301

Updated the DNE using this deterministic networks link
http://www.deterministicnetworks.com/support/dnesupport.asp

Run the WINFIX application, then the upgrade DNE.

(2) take a backup of the registry.
(3) on your desktop, click Start > run and type regedit.
(4) delete the following keys:

(a) go to HKEY_LOCAL_MACHINE > SOFTWARE > Cisco Systems > customer VPN.
(b) go to HKEY_LOCAL_MACHINE > SOFTWARE > deterministic networks and remove the keys.
Note: Sometimes the system will not allow deletion of this key.

(c) go to HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > uninstall > {5624c000-b109-11d4-9db4-00e0290fcac5}.
(d) delete all the old files deterministic NDIS Extender (DNE): all files starting with DNE, as all are coming files and Client VPN facilities.

dne2000.sys %SystemRoot%\system32\drivers
dne2000m.inf and dne2000m.pnf of %SystemRoot%\inf

(e) the enumeration of original manufacturers of hardware (OEM) of the dne2000.inf and dne2000.pnf files.

The OEM enumeration .inf file is a file called ".inf oem (digital value)."
For example, oem2.inf and oem2.pnf.

Note: Be sure to remove only the DNE OEM files.

dneinobj.dll % SystemRoot%\system32. You may need to reboot for this file can be deleted.

(f) delete the following file: cvpndrv.sys to %SystemRoot%\system32\drivers

(5) reboot the machine.

(6) find the file CSGina.dll in the system32 folder rename it to CSGina.old

7-restart the machine.

(8) to disable any firewall if not installed.

Hope that helps.

Established VPN tunnel between 4.8 Client and 525 PIX but cannot ping

When there is no tunnel that is established, the client can ping all devices onsite / remote. However when the tunnel is established and the client picks up its expected the address pool IP address, the client can ping or local / remote.

Debug trace of icmp on the shows of PIX inside devices responding to pings from the client but the client

does not receive these responses and shows demand exceeded.

VPN client also shows only the transmitted data.

I'm guessing that there is a problem of routing/natting somewhere?

Would really appreciate some help on this? Ask some q If my problem is too vague.

Thanks in advance!

Would it be possible to show the hidden config of the PIX with the public IP addresses? Some things to check

--> ISAKMP Nat traversal

--> Windows Firewall

--> syspot allowed

Router Cisco client VPN SPlit tunnel does not work

Hello!
I have configured the Cisco VPN CLient on a 2821 router, and it works fine.
I could access the inside resourses normally >
the problem is that when I connect with VPN I lost internet connectivity?

What wrong with my setup?

Below the current configuration of the router.
Kind regards!

CISCO2821 #sh run

Building configuration...

Current configuration: 5834 bytes

!

version 12.4

horodateurs service debug datetime msec

Log service timestamps datetime msec

no password encryption service

!

hostname CISCO2821

!

boot-start-marker

start the flash c2800nm-adventerprisek9 - mz.124 - 20.T.bin system

boot-end-marker

!

forest-meter operation of syslog messages

logging buffered 51200 warnings

!

AAA new-model

!

!

connection local VPN-LOCAL-AUTHENTIC AAA authentication

local AAA authorization network VPN-LOCAL-AUTHOR

!

!

AAA - the id of the joint session

!

dot11 syslog

IP source-route

!

!

IP cef

!

!

"yourdomain.com" of the IP domain name

8.8.8.8 IP name-server

No ipv6 cef

!

Authenticated MultiLink bundle-name Panel

!

!

voice-card 0

No dspfarm

!

!

username secret privilege 0 vpn 5 $1$ tCf1$ XAxQWtDRYdfy9g3JpVSvZ.

Archives

The config log

hidekeys

!

!

crypto ISAKMP policy 44

BA aes

preshared authentication

Group 2

life 44444

!

ISAKMP crypto group configuration of VPN client

key VPNVPNVPN

VPN-pool

ACL VPN-ACL-SPLIT

Max-users 5000

!

!

ISAKMP crypto ISAKMP-VPN-profile

identity VPN group match

list of authentication of client VPN-LOCAL-AUTHENTIC

VPN-LOCAL-AUTHOR of ISAKMP authorization list.

client configuration address respond

Configuration of VPN client group

virtual-model 44

!

!

Crypto ipsec transform-set VPN - SET esp - aes esp-sha-hmac

!

Crypto ipsec VPN-profile

transformation-VPN-SET game

Set isakmp VPN ISAKMP-PROFILE

!

!

interface GigabitEthernet0/0

IP 192.168.2.214 255.255.255.0

NAT outside IP

IP virtual-reassembly

IP tcp adjust-mss 1412

automatic duplex

automatic speed

!

interface GigabitEthernet0/1

IP 192.168.1.1 255.255.255.0

IP nat inside

IP virtual-reassembly

IP tcp adjust-mss 1412

automatic duplex

automatic speed

!

interface FastEthernet0/0/0

no ip address

Shutdown

automatic duplex

automatic speed

!

type of interface virtual-Template44 tunnel

IP unnumbered GigabitEthernet0/0

ipv4 ipsec tunnel mode

Tunnel ipsec VPN-PROFILE protection profile

!

interface Dialer0

no ip address

IP mtu 1452

IP virtual-reassembly

Shutdown

!

local pool IP VPN-POOL 192.168.1.150 192.168.1.250

IP forward-Protocol ND

IP http server

IP 8081 http port

23 class IP http access

local IP http authentication

no ip http secure server

IP http timeout policy slowed down 60 life 86400 request 10000

!

!

IP nat inside source list ACL - NAT interface GigabitEthernet0/0 overload

!

IP access-list standard ACL-TELNET

allow a

!

extended ACL - NAT IP access list

ip permit 192.168.1.0 0.0.0.255 any

IP extended ACL-VPN-SPLIT access list

ip permit 192.168.1.0 0.0.0.255 192.168.1.0 0.0.0.255

scope of access to IP-VPN-ACL-SPLIT list

!

control plan

!

exec banner ^ C

% Warning of password expiration.

-----------------------------------------------------------------------

Professional configuration Cisco (Cisco CP) is installed on this device

and it provides the default username "cisco" single use. If you have

already used the username "cisco" to connect to the router and your IOS image

supports the option "unique" user, that user name is already expired.

You will not be able to connect to the router with the username when you leave

This session.

It is strongly recommended that you create a new user name with a privilege level

15 using the following command.

username secret privilege 15 0

Replace and with the username and password you want

use.

-----------------------------------------------------------------------

Line con 0

exec-timeout 0 0

Synchronous recording

line to 0

line vty 0 4

ACL-TELNET access class in

exec-timeout 30 0

privilege level 15

Synchronous recording

transport input telnet ssh

line vty 5 15

ACL-TELNET access class in

exec-timeout 30 0

privilege level 15

Synchronous recording

transport input telnet ssh

line vty 16 988

ACL-TELNET access class in

exec-timeout 30 0

Synchronous recording

transport input telnet ssh

!

Scheduler allocate 20000 1000

end

CISCO2821 #.

I think that you made a mistake with your ACL name. the ACL applied is "VPN-ACL-SPLIT" which is an empty ACL. You must switch to that of "ACL-VPN-SPLIT" that has the entry "ip 192.168.1.0 allow 0.0.0.255 192.168.1.0 0.0.0.255" inside.

Traffic of Client VPN routing via VPN Site to Site

Hello

We have the following scenario:

Office (192.168.2.x)
Data Center (212.64.x.x)
Home workers (192.168.2.x) (scope DHCP is in the office subnet)

Connections:

Desktop to Data Center traffic is routed through a Site at IPSec VPN, which works very well.
Welcome to the office is routed through a Site IPSec VPN Client.

The question we have right now, is the Client VPN works, and we have implemented a split tunnel which includes only the subnet of the Office for a list of network.

What I have to do, is to route all traffic to home' to 'Data Center' by site to Site VPN is configured.

I tried to add the ranges of IP data center to the list of Client VPN Split tunnel, but when I do that and try to connect at home, I just get a "connection timed out" or denied, as if she was protected by a firewall?

Could you please let me know what I missed?

Result of the command: "show running-config"

: Saved

ASA Version 8.2(5)

hostname ciscoasa

domain-name skiddle.internal

enable password xxx encrypted

passwd xxx encrypted

names

name 188.39.51.101 dev.skiddle.com description Dev External

name 192.168.2.201 dev.skiddle.internal description Internal Dev server

name 164.177.128.202 www-1.skiddle.com description Skiddle web server

name 192.168.2.200 Newserver

name 217.150.106.82 Holly

interface Ethernet0/0

switchport access vlan 2

interface Ethernet0/1

interface Ethernet0/2

interface Ethernet0/3

shutdown

interface Ethernet0/4

shutdown

interface Ethernet0/5

shutdown

interface Ethernet0/6

shutdown

interface Ethernet0/7

shutdown

interface Vlan1

nameif inside

security-level 100

ip address 192.168.2.254 255.255.255.0

interface Vlan2

nameif outside

security-level 0

ip address 192.168.3.250 255.255.255.0

time-range Workingtime

periodic weekdays 9:00 to 18:00

ftp mode passive

clock timezone GMT/BST 0

clock summer-time GMT/BDT recurring last Sun Mar 1:00 last Sun Oct 2:00

dns domain-lookup inside

dns server-group DefaultDNS

name-server Newserver

domain-name skiddle.internal

same-security-traffic permit inter-interface

object-group service Mysql tcp

port-object eq 3306

object-group protocol TCPUDP

protocol-object udp

protocol-object tcp

object-group network rackspace-public-ips

description Rackspace Public IPs

network-object 164.177.132.16 255.255.255.252

network-object 164.177.132.72 255.255.255.252

network-object 212.64.147.184 255.255.255.248

network-object 164.177.128.200 255.255.255.252

object-group network Cuervo

description Test access for cuervo

network-object host Holly

object-group service DM_INLINE_TCP_1 tcp

port-object eq www

port-object eq https

object-group service DM_INLINE_TCP_2 tcp

port-object eq www

port-object eq https

object-group service DM_INLINE_TCP_3 tcp

port-object eq www

port-object eq https

object-group service DM_INLINE_TCP_4 tcp

port-object eq www

port-object eq https

access-list inside_access_in extended permit ip any any

access-list outside_access_in remark ENABLES Watermark Wifi ACCESS TO DEV SERVER!

access-list outside_access_in extended permit tcp 188.39.51.0 255.255.255.0 interface outside object-group DM_INLINE_TCP_4 time-range Workingtime

access-list outside_access_in remark ENABLES OUTSDIE ACCESS TO DEV SERVER!

access-list outside_access_in extended permit tcp any interface outside object-group DM_INLINE_TCP_3

access-list outside_access_in remark Public Skiddle Network > Dev server

access-list outside_access_in extended permit tcp 192.168.3.0 255.255.255.0 interface outside eq www

access-list outside_access_in extended permit tcp object-group rackspace-public-ips interface outside eq ssh

access-list outside_access_in remark OUTSIDE ACCESS TO DEV SERVER

access-list outside_access_in extended permit tcp object-group Cuervo interface outside object-group DM_INLINE_TCP_1 inactive

access-list outside_access_in extended permit tcp 192.168.3.0 255.255.255.0 host dev.skiddle.internal object-group DM_INLINE_TCP_2 inactive

access-list inside_access_in_1 remark HTTP OUT

access-list inside_access_in_1 extended permit tcp any any eq www

access-list inside_access_in_1 remark HTTPS OUT

access-list inside_access_in_1 extended permit tcp any any eq https

access-list inside_access_in_1 remark SSH OUT

access-list inside_access_in_1 extended permit tcp any any eq ssh

access-list inside_access_in_1 remark MYSQL OUT

access-list inside_access_in_1 extended permit tcp any host 164.177.128.200 object-group Mysql

access-list inside_access_in_1 remark SPHINX OUT

access-list inside_access_in_1 extended permit tcp any host 164.177.128.200 eq 3312

access-list inside_access_in_1 remark DNS OUT

access-list inside_access_in_1 extended permit object-group TCPUDP host Newserver any eq domain

access-list inside_access_in_1 remark PING OUT

access-list inside_access_in_1 extended permit icmp any any

access-list inside_access_in_1 remark Draytek Admin

access-list inside_access_in_1 extended permit tcp any 192.168.3.0 255.255.255.0 eq 4433

access-list inside_access_in_1 remark Phone System

access-list inside_access_in_1 extended permit tcp any 192.168.3.0 255.255.255.0 eq 35300 log disable

access-list inside_access_in_1 remark IPSEC VPN OUT

access-list inside_access_in_1 extended permit udp any host 94.236.41.227 eq 4500

access-list inside_access_in_1 remark IPSEC VPN OUT

access-list inside_access_in_1 extended permit udp any host 94.236.41.227 eq isakmp

access-list inside_access_in_1 remark Office to Rackspace OUT

access-list inside_access_in_1 extended permit ip 192.168.2.0 255.255.255.0 object-group rackspace-public-ips

access-list inside_access_in_1 remark IMAP OUT

access-list inside_access_in_1 extended permit tcp any any eq imap4

access-list inside_access_in_1 remark FTP OUT

access-list inside_access_in_1 extended permit tcp any any eq ftp

access-list inside_access_in_1 remark FTP DATA out

access-list inside_access_in_1 extended permit tcp any any eq ftp-data

access-list inside_access_in_1 remark SMTP Out

access-list inside_access_in_1 extended permit tcp any any eq smtp

access-list outside_1_cryptomap extended permit ip 192.168.2.0 255.255.255.0 object-group rackspace-public-ips

access-list inside_nat0_outbound extended permit ip 192.168.2.0 255.255.255.0 192.168.100.0 255.255.255.0

access-list inside_nat0_outbound extended permit ip 192.168.2.0 255.255.255.0 object-group rackspace-public-ips

access-list inside_nat0_outbound extended permit ip any 192.168.2.128 255.255.255.224

access-list inside_1_cryptomap extended permit ip 192.168.2.0 255.255.255.0 object-group rackspace-public-ips

access-list outside_1_cryptomap_1 extended permit tcp 192.168.2.0 255.255.255.0 object-group rackspace-public-ips eq ssh

access-list RACKSPACE-cryptomap_1 extended permit ip 192.168.2.0 255.255.255.0 object-group rackspace-public-ips

access-list RACKSPACE-TEST extended permit ip host 94.236.41.227 any

access-list RACKSPACE-TEST extended permit ip any host 94.236.41.227

access-list InternalForClientVPNSplitTunnel remark Inside for VPN

access-list InternalForClientVPNSplitTunnel standard permit 192.168.2.0 255.255.255.0

access-list InternalForClientVPNSplitTunnel remark Rackspace

access-list InternalForClientVPNSplitTunnel standard permit 164.177.128.200 255.255.255.252

access-list InternalForClientVPNSplitTunnel remark Rackspace

access-list InternalForClientVPNSplitTunnel standard permit 164.177.132.16 255.255.255.252

access-list InternalForClientVPNSplitTunnel remark Rackspace

access-list InternalForClientVPNSplitTunnel standard permit 164.177.132.72 255.255.255.252

access-list InternalForClientVPNSplitTunnel remark Rackspace

access-list InternalForClientVPNSplitTunnel standard permit 212.64.147.184 255.255.255.248

pager lines 24

logging enable

logging console debugging

logging monitor debugging

logging buffered debugging

logging trap debugging

logging asdm warnings

logging from-address [email protected]/* */

logging recipient-address [email protected]/* */ level errors

mtu inside 1500

mtu outside 1500

ip local pool CiscoVPNDHCPPool 192.168.2.130-192.168.2.149 mask 255.255.255.0

ip verify reverse-path interface inside

ip verify reverse-path interface outside

ipv6 access-list inside_access_ipv6_in permit tcp any any eq www

ipv6 access-list inside_access_ipv6_in permit tcp any any eq https

ipv6 access-list inside_access_ipv6_in permit tcp any any eq ssh

ipv6 access-list inside_access_ipv6_in permit icmp6 any any

icmp unreachable rate-limit 1 burst-size 1

icmp permit any outside

no asdm history enable

arp timeout 14400

global (outside) 1 interface

nat (inside) 0 access-list inside_nat0_outbound

nat (inside) 1 0.0.0.0 0.0.0.0

static (inside,outside) tcp interface www dev.skiddle.internal www netmask 255.255.255.255

static (inside,outside) tcp interface ssh dev.skiddle.internal ssh netmask 255.255.255.255

access-group inside_access_in in interface inside control-plane

access-group inside_access_in_1 in interface inside

access-group inside_access_ipv6_in in interface inside

access-group outside_access_in in interface outside

route outside 0.0.0.0 0.0.0.0 192.168.3.254 10

timeout xlate 3:00:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00

timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00

timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

timeout floating-conn 0:00:00

dynamic-access-policy-record DfltAccessPolicy

aaa authentication telnet console LOCAL

aaa authentication enable console LOCAL

http server enable 4433

http 192.168.1.0 255.255.255.0 inside

http 192.168.2.0 255.255.255.0 inside

no snmp-server location

no snmp-server contact

snmp-server enable traps snmp authentication linkup linkdown coldstart

crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac

crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac

crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac

crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac

crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac

crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac

crypto ipsec security-association lifetime seconds 86400

crypto ipsec security-association lifetime kilobytes 4608000

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set security-association lifetime seconds 28800

crypto map outside_map 1 match address RACKSPACE-cryptomap_1

crypto map outside_map 1 set pfs

crypto map outside_map 1 set peer 94.236.41.227

crypto map outside_map 1 set transform-set ESP-AES-128-SHA

crypto map outside_map 1 set security-association lifetime seconds 86400

crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP

crypto map outside_map interface outside

crypto ca trustpoint _SmartCallHome_ServerCA

crl configure

crypto ca certificate chain _SmartCallHome_ServerCA

certificate ca xxx

quit

crypto isakmp enable outside

crypto isakmp policy 10

authentication crack

encryption aes-256

hash sha

group 2

lifetime 86400

crypto isakmp policy 20

authentication rsa-sig

encryption aes-256

hash sha

group 2

lifetime 86400

crypto isakmp policy 30

authentication pre-share

encryption aes-256

hash sha

group 2

lifetime 86400

crypto isakmp policy 40

authentication crack

encryption aes-192

hash sha

group 2

lifetime 86400

crypto isakmp policy 50

authentication rsa-sig

encryption aes-192

hash sha

group 2

lifetime 86400

crypto isakmp policy 60

authentication pre-share

encryption aes-192

hash sha

group 2

lifetime 86400

crypto isakmp policy 70

authentication crack

encryption aes

hash sha

group 2

lifetime 86400

crypto isakmp policy 80

authentication rsa-sig

encryption aes

hash sha

group 2

lifetime 86400

crypto isakmp policy 90

authentication pre-share

encryption aes

hash sha

group 2

lifetime 86400

crypto isakmp policy 100

authentication crack

encryption 3des

hash sha

group 2

lifetime 86400

crypto isakmp policy 110

authentication rsa-sig

encryption 3des

hash sha

group 2

lifetime 86400

crypto isakmp policy 120

authentication pre-share

encryption 3des

hash sha

group 2

lifetime 86400

crypto isakmp policy 130

authentication crack

encryption des

hash sha

group 2

lifetime 86400

crypto isakmp policy 140

authentication rsa-sig

encryption des

hash sha

group 2

lifetime 86400

crypto isakmp policy 150

authentication pre-share

encryption des

hash sha

group 2

lifetime 86400

telnet 192.168.1.0 255.255.255.0 inside

telnet 192.168.2.0 255.255.255.0 inside

telnet timeout 5

ssh timeout 5

console timeout 0

dhcpd auto_config outside

dhcprelay server 192.68.2.200 inside

threat-detection basic-threat

threat-detection scanning-threat

threat-detection statistics host

threat-detection statistics access-list

threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200

ntp server 194.35.252.7 source outside prefer

webvpn

port 444

svc image disk0:/anyconnect-macosx-i386-2.4.1012-k9.pkg 1 regex "Intel Mac OS X"

group-policy DfltGrpPolicy attributes

vpn-tunnel-protocol IPSec webvpn

group-policy skiddlevpn internal

group-policy skiddlevpn attributes

dns-server value 192.168.2.200

vpn-tunnel-protocol IPSec l2tp-ipsec

split-tunnel-policy tunnelspecified

split-tunnel-network-list value InternalForClientVPNSplitTunnel

default-domain value skiddle.internal

username bensebborn password *** encrypted privilege 0

username bensebborn attributes

vpn-group-policy skiddlevpn

username benseb password gXdOhaMts7w/KavS encrypted privilege 15

tunnel-group 94.236.41.227 type ipsec-l2l

tunnel-group 94.236.41.227 ipsec-attributes

pre-shared-key *****

tunnel-group skiddlevpn type remote-access

tunnel-group skiddlevpn general-attributes

address-pool CiscoVPNDHCPPool

default-group-policy skiddlevpn

tunnel-group skiddlevpn ipsec-attributes

pre-shared-key *****

class-map inspection_default

match default-inspection-traffic

policy-map type inspect dns preset_dns_map

parameters

message-length maximum client auto

message-length maximum 512

policy-map global_policy

class inspection_default

inspect dns preset_dns_map

inspect ftp

inspect h323 h225

inspect h323 ras

inspect rsh

inspect rtsp

inspect esmtp

inspect sqlnet

inspect skinny

inspect sunrpc

inspect xdmcp

inspect sip

inspect netbios

inspect tftp

inspect ip-options

policy-map global-policy

class inspection_default

inspect icmp

inspect icmp error

inspect ipsec-pass-thru

inspect ftp

service-policy global_policy global

smtp-server 164.177.128.203

prompt hostname context

call-home reporting anonymous

Cryptochecksum:6c2eb43fa1150f9a5bb178c716d8fe2b

: end

You must even-Security-enabled traffic intra-interface to allow communication between vpn VPN.

With respect,

Safwan

Remember messages useful rate.

Impossible to establish a VPN connection with a router configured as a Cisco server using client VPN 5.0.00.0340

Hei guys,.

Please help me on this one because I'm stuck enough on her...

I am trying to connect to a Cisco 3700 router configured as a VPN server by using a VPN client and the VPN connection does not settle.

This is an extract from the log:

130 12:48:30.585 07/01/11 Sev = Info/5 IKE / 0 x 63000001
Peer supports XAUTH
131 12:48:30.585 07/01/11 Sev = WARNING/3 IKE/0xE3000057
The HASH payload received cannot be verified
132 12:48:30.600 07/01/11 Sev = WARNING/2 IKE/0xE300007E
Failed the hash check... may be configured with password invalid group.
133 12:48:30.600 07/01/11 Sev = WARNING/2 IKE/0xE300009B
Impossible to authenticate peers (Navigator: 904)
134 12:48:30.600 07/01/11 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK INFO (NOTIFY: INVALID_HASH_INFO) for 200.100.50.173

I enclose the whole journal extract... The message "BOLD" is quite obvious, you mean, but I'm 100% sure, in the login entry, I typed correctly the group password: pass

My topology is very basic, as I am setting this up only to get a clue of the operation of the Cisco VPN. It is built in GNS3:
-2 3700 routers: one of them holds the configuration of the VPN server and the other would be the ISP through which the remote worker would try to establish a VPN connection. I am also attaching the configuration file for the router configured as a VPN router.

Behind the second router there is a virtual XP machine on which I have installed VPN client...

My connection entry in the customer is to have the following parameters:
Host: 200.100.50.173 , //which is the IP address of the VPNServer
Authentication-> authentication-> name group: grup1 password: pass / / I'm quite positive that I typed the correct password... even if the log messages are linked to a misidentification.

I use public addresses only, because I noticed there is a question about behind the NAT VPN connections and is not not very familiar to the NAT.

Another aspect which can be of any importance is that "allow Tunneling of Transport" in the tab Transport to the input connection is disabled

and the VPNServer router logs the following error message when you try to establish the connection:

* 01:08:47.147 Mar 1: % CRYPTO-6-IKMP_NOT_ENCRYPTED: IKE 200.100.50.34 package was not encrypted and it should have been.
* 01:08:47.151 Mar 1: % CRYPTO-6-IKMP_NOT_ENCRYPTED: IKE 200.100.50.34 package was not encrypted and it should have been.

You have no idea why I can't connect? Y at - it something wrong with my configuration of VPN server... or with the connection entry in the VPN client?

Thank you

Iulia

Depending on the configuration of the router, the group name is grup1 and the password is baby.

You also lack the ipsec processing game that you would need to apply to the dynamic map.

Here is an example configuration for your reference:

http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a0080235197.shtml

Hope that helps.

PIX-to-client VPN and how to reach on other interfaces systems

Hi all

I've implemented a Pix-to-Client VPN and it seems works ok.

As you can see, customer gets the same inside the class address (192.168.100.x) so I can reach across systems.

My questions are:

If I give different subnet pool addresses, how can 1 I still reach inside systems?

2 if I have other systems on these interfaces such dmz1 (192.168.10.0) dmz2 (192.168.20.0) how to get to these systems of the

even the client vpn access?

Concerning

Alberto Brivio

IP local pool vpnpool1 192.168.100.70 - 192.168.100.80

access-list 102 permit ip 192.168.100.0 255.255.255.0 192.168.100.0 255.255.255.0

NAT (inside) - 0 102 access list

Permitted connection ipsec sysopt

Crypto ipsec transform-set esp - esp-md5-hmac trmset1

Crypto-map dynamic map2 10 set transform-set trmset1

map map1 10 ipsec-isakmp crypto dynamic map2

map1 outside crypto map interface

ISAKMP allows outside

ISAKMP identity address

part of pre authentication ISAKMP policy 10

encryption of ISAKMP policy 10

ISAKMP policy 10 md5 hash

10 2 ISAKMP policy group

ISAKMP life duration strategy 10 86400

vpngroup address vpnpool1 pool test

vpngroup split tunnel 102 test

vpngroup test 1800 idle time

test vpngroup password *.

It is generally preferable to use another range of IP addresses. The PIX will know that the VPN Client uses that vary and route it properly whitch is not the case when you are using the same IP range as the inside interface.

To access another interface use the SHEEP (your ACL 102) access list which disables NAT between the VPN and the neworks to which you want to connect.

Example of config:

access-list allowed SHEEP Internalnet ISubnetMask VPN-pool 255.255.255.0 ip

access-list allowed SHEEP DMZnet DMZSubnetMask VPN-pool 255.255.255.0 ip

NAT (inside) 0 SHEEP

AAA-server local LOCAL Protocol

AAA authentication secure-http-client

Permitted connection ipsec sysopt

Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS

Crypto-map dynamic outside_dyn_map 20 game of transformation-TRANS

card crypto 65535 REMOTE ipsec-isakmp dynamic outside_dyn_map

REMOTE client authentication card crypto LOCAL

interface card crypto remotely outside

ISAKMP allows outside

ISAKMP identity address

ISAKMP nat-traversal 20

part of pre authentication ISAKMP policy 10

ISAKMP policy 10 3des encryption

ISAKMP policy 10 md5 hash

10 2 ISAKMP policy group

ISAKMP life duration strategy 10 86400

IP pool local VPNPool x.y.z.1 - x.y.z.254

vpngroup VPNGroup address pool VPNPool

vpngroup VPNGroup dns-server dns1 dns2

vpngroup VPNGroup default-domain localdomain

vpngroup idle 1800 VPNGroup-time

vpngroup VPNGroup password grouppassword

username, password vpnclient vpnclient-password

sincerely

Patrick

Client VPN routing issue

I am trying to configure client vpn software ver 5.0 for remote to connect to the local network behind a 1801 users.

I can get the client saying its connected but traffic is not circulate outside in:

When I try to ping an address 192.168.2.x behind the 1801 I get a response from the public ip address but then when I try to ping to another address I have no answer.

I guess the question is associated with NAT.

Here is my config, your help is apprecited

horodateurs service debug datetime msec

Log service timestamps datetime msec

encryption password service

!

host name C#.

!

boot-start-marker

boot-end-marker

!

enable password 7 #.

!

AAA new-model

!

AAA authentication login userauthen local

AAA authorization groupauthor LAN

!

AAA - the id of the joint session

!

IP cef

!

IP domain name # .local

property intellectual auth-proxy max-nodata-& 3

property intellectual admission max-nodata-& 3

!

Authenticated MultiLink bundle-name Panel

!

username password admin privilege 15 7 #.

!

crypto ISAKMP policy 3

BA 3des

preshared authentication

Group 2

!

ISAKMP crypto client configuration group 1801Client

key ##############

DNS 192.168.2.251

win 192.168.2.251

field # .local

pool VpnPool

ACL 121

!

Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

!

Crypto-map dynamic dynmap 10

Set transform-set RIGHT

!

map clientmap client to authenticate crypto list userauthen

card crypto clientmap isakmp authorization list groupauthor

client configuration address map clientmap throwing crypto

client configuration address map clientmap crypto answer

10 ipsec-isakmp crypto map clientmap Dynamics dynmap

!

Archives

The config log

hidekeys

!

property intellectual ssh time 60

property intellectual ssh authentication-2 retries

!

interface FastEthernet0

address IP 87. #. #. # 255.255.255.252

IP access-group 113 to

NAT outside IP

IP virtual-reassembly

automatic duplex

automatic speed

clientmap card crypto

!

interface BRI0

no ip address

encapsulation hdlc

Shutdown

!

interface FastEthernet1

interface FastEthernet8

!

ATM0 interface

no ip address

Shutdown

No atm ilmi-keepalive

DSL-automatic operation mode

!

interface Vlan1

IP 192.168.2.245 255.255.255.0

IP nat inside

IP virtual-reassembly

!

IP pool local VpnPool 192.168.3.200 192.168.3.210

no ip forward-Protocol nd

IP route 0.0.0.0 0.0.0.0 87. #. #. #

!

!

no ip address of the http server

no ip http secure server

the IP nat inside source 1 interface FastEthernet0 overload list

IP nat inside source static tcp 192.168.2.251 25 87. #. #. # 25 expandable

Several similar to the threshold with different ports

!

access-list 1 permit 192.168.2.0 0.0.0.255

access-list 113 allow host tcp 82. #. #. # host 87. #. #. # eq 22

access-list 113 permit tcp 84. #. #. # 0.0.0.3 host 87. #. #. # eq 22

access-list 113 allow host tcp 79. #. #. # host 87. #. #. # eq 22

access-list 113 tcp refuse any any eq 22

access-list 113 allow host tcp 82. #. #. # host 87. #. #. # eq telnet

access-list 113 permit tcp 84. #. #. # 0.0.0.3 host 87. #. #. # eq telnet

access-list 113 allow host tcp 79. #. #. # host 87. #. #. # eq telnet

access-list 113 tcp refuse any any eq telnet

113 ip access list allow a whole

access-list 121 permit ip 192.168.2.0 0.0.0.255 192.168.3.0 0.0.0.255

access-list 121 allow ip 192.168.3.0 0.0.0.255 192.168.2.0 0.0.0.255

!

control plan

!

Line con 0

line to 0

line vty 0 4

transport input telnet ssh

!

end

you have ruled out the IP address of the customer the NAT pool

either denying them in access list 1

or do road map that point to the loopback address as a next hop for any destent package for your pool to avoid nat

first try to put this article in your access-lst 110

access-list 110 deny 192.168.2.0 0.0.0.255 192.168.3.0 0.0.0.255

access-list 110 permit 192.168.2.0 0.0.0.255 any

sheep allow 10 route map

corresponds to the IP 110

remove your old nat and type following one

IP nat inside source overload map route interface fastethernet0 sheep

rate if useful

and let me know, good luck

Client VPN Cisco ASA 5505 Cisco 1841 router

Hello. I'm doing a connection during a cisco vpn client and a vpn on one server asa 5505 behind a 1841 router (internet adsl2 + and NAT router).

My topology is almost as follows

customer - tunnel - 1841 - ASA - PC

ASA is the endpoint vpn (outside interface) device. I forward udp port 500 and 4500 on my router to the ASA and the tunnel rises. I exempt nat'ting on the asa and the router to the IP in dhcp vpn pool. I can connect to my tunnel but I can't "see" anything in the internal network. I allowed all traffic from the outside inwards buy from the ip vpn pool and I still send packets through the tunnel and I get nothing. I take a look at the statistics on the vpn client and I 2597 bytes (ping traffic) and there are no bytes. Any idea?

Where you you logged in when you took the "crypto ipsec to show his"? If this isn't the case then try again, also this option allows IPSEC over UDP 4500 and it is disabled, enable it.

ISAKMP nat-traversal crypto

Just enter the command as it is, then try to connect again after activation of this option and get the same result to see the.

PIX and ASA static, dynamic and RA VPN does not

Hello

I am facing a very interesting problem between a PIX 515 and an ASA 5510.

The PIX is in HQ and has several dynamic VPN connections (around 130) and IPsec vpn remote works very well. I had to add a PIX to ASA L2L VPN static and it does not work as it is supposed to be. The ASA 5510, at the remote end, connects and rest for a small period of time, however, all other VPN connections stop working.

The most interesting thing is that ASA is associated with the dynamic map and not the static map that I created (check by sh crypto ipsec his counterpart x.x.x.x). However, if I make any changes in the ACL 'ACL-Remote' it affects the tunnel between the PIX and ASA.

Someone saw something like that?

Here is more detailed information:

HQ - IOS 8.0 (3) - PIX 515

ASA 5510 - IOS 7.2 (3) - remote provider

Several Huawei and Cisco routers dynamically connected via ADSL

Several users remote access IPsec

A VPN site-to site static between PIX and ASA - does not.

Here is the config on the PIX:

Crypto ipsec transform-set ESP-3DES-ESP-SHA-HMAC-IPSec esp-3des esp-sha-hmac

Dyn - VPN game 100 Dynamics-card crypto transform-set ESP-3DES-ESP-SHA-HMAC-IPSec

Crypto dynamic-map Dyn - VPN 100 the value reverse-road

VPN - card 30 crypto card matches the ACL address / remote

card crypto VPN-card 30 peers set 20 x. XX. XX. XX

card crypto VPN-card 30 the transform-set ESP-3DES-ESP-SHA-HMAC-IPSec value

VPN crypto card - 100 - isakmp dynamic Dyn - VPN ipsec

interface card crypto VPN-card outside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

md5 hash

Group 2

life 86400

crypto ISAKMP policy 65535

preshared authentication

3des encryption

sha hash

Group 2

life 86400

access list ACL-remote ext ip 10.0.0.0 allow 255.255.255.0 192.168.1.0 255.255.255.0

Thank you.

Marcelo Pinheiro

The problem is that the ASA has a crypto acl defined between host and network, while the remote end has to the network.

Make sure that the acl is reversed.

Client VPN Cisco router Cisco, MSW CA + certificates

Dear Sirs,
Let me approach you on the following problem.

I wanted to use a secure between the Cisco VPN client connection
(Windows XP) and Cisco 2821 with certificate-based authentication.
I used the Microsoft certification authority (Windows 2003 server).
Cisco VPN client used eTokenPRO Aladdin as a certificate store.

Certificate of MSW CA registration and implementation in eToken ran OK
Customer VPN Cisco doesn't have a problem with the cooperation of eToken.
Certificate of registration of Cisco2821 MSW ca ran okay too.

Cisco 2821 configuration is standard. IOS version 12.4 (6).

Attempt to connect to the client VPN Cisco on Cisco 2821 was
last update of the error messages:

ISAKMP: (1020): cannot get router cert or routerdoes do not have a cert: had to find DN!
ISAKMP: (1020): ITS been RSA signature authentication more XAUTH using id ID_FQDN type
ISAKMP (1020): payload ID
next payload: 6
type: 2
FULL domain name: cisco - ca.firm.com
Protocol: 17
Port: 500
Length: 25
ISAKMP: (1020): the total payload length: 25
ISAKMP (1020): no cert string to send to peers
ISAKMP (1020): peer not specified not issuing and none found appropriate profile
ISAKMP (1020): Action of WSF returned the error: 2
ISAKMP: (1020): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
ISAKMP: (1020): former State = new State IKE_R_MM5 = IKE_P1_COMPLETE

Is there some refence where is possible to find some information on
This problem? There is someone who knows how to understand these mistakes?
Thank you very much for your help.

Best regards
P.Sonenberk

PS Some useful information for people who are interested in the above problem.

Address IP of Cisco 2821 10.1.1.220, client VPN IP address is 10.1.1.133.
MSW's IP 10.1.1.50.
Important parts of the Cisco 2821 configuration:

!
cisco-ca hostname
!
................
AAA new-model
!
AAA authentication login default local
AAA authentication login sdm_vpn_xauth_ml_1 local
AAA authorization exec default local
AAA authorization sdm_vpn_group_ml_1 LAN
!
...............
IP domain name firm.com
host IP company-cu 10.1.1.50
host to IP cisco-vpn1 10.1.1.133
name of the IP-server 10.1.1.33
!
Authenticated MultiLink bundle-name Panel
!
Crypto pki trustpoint TP-self-signed-4097309259
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 4097309259
revocation checking no
rsakeypair TP-self-signed-4097309259
!
Crypto pki trustpoint company-cu
registration mode ra
Enrollment url http://10.1.1.50:80/certsrv/mscep/mscep.dll
use of ike
Serial number no
IP address no
password 7 005C31272503535729701A1B5E40523647
revocation checking no
!
TP-self-signed-4097309259 crypto pki certificate chain
certificate self-signed 01
30820249 308201B 2 A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
.............
FEDDCCEA 8FD14836 24CDD736 34
quit smoking
company-cu pki encryption certificate chain
certificate 1150A66F000100000013
30820509 308203F1 A0030201 02020 HAS 11 092A 8648 01000000 13300 06 50A66F00
...............
9E417C44 2062BFD5 F4FB9C0B AA
quit smoking
certificate ca 51BAC7C822D1F6A3469D1ADC32D0EB8C
30820489 30820371 A0030201 BAC7C822 02021051 D1F6A346 9D1ADC32 D0EB8C30
...............
C379F382 36E0A54E 0A6278A7 46
quit smoking
!
...................
crypto ISAKMP policy 30
BA 3des
md5 hash
authentication rsa-BA
Group 2
ISAKMP crypto identity hostname
!
Configuration group customer isakmp crypto Group159
key Key159Key
pool SDM_POOL_1
ACL 100
!
the crypto isakmp client configuration group them
domain firm.com
pool SDM_POOL_1
ACL 100
!
Crypto ipsec transform-set esp-3des esp-md5-hmac 3DES-MD5
!
crypto dynamic-map SDM_DYNMAP_1 1
the transform-set 3DES-MD5 value
market arriere-route
!
card crypto SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1
map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1 crypto
client configuration address map SDM_CMAP_1 crypto answer
map SDM_CMAP_1 65535-isakmp dynamic SDM_DYNMAP_1 ipsec crypto
!
................
!
end

status company-cu of Cisco-ca #show cryptographic pki trustpoints
Trustpoint company-cu:
Issuing CA certificate configured:
Name of the object:
CN = firm-cu, dc = company, dc = local
Fingerprint MD5: 5026582F 8CF455F8 56151047 2FFAC0D6
Fingerprint SHA1: 47B 74974 7C85EA48 760516DE AAC84C5D 4427E829
Universal router configured certificate:
Name of the object:
host name = cisco - ca.firm.com
Fingerprint MD5: E78702ED 47D5D36F B732CC4C BA97A4ED
Fingerprint SHA1: 78DEAE7E ACC12F15 1DFB4EB8 7FC DC6F3B7E 00138
State:
Generated keys... Yes (general purpose, not exportable)
Authenticated issuing certification authority... Yes
Request certificate (s)... Yes

Cisco-ca #sh crypto pubkey-door-key rsa
Code: M - configured manually, C - excerpt from certificate

Name of code use IP-address/VRF Keyring
C Signature name of X.500 DN default:
CN = firm-cu
DC = company
DC = local

C signature by default cisco-vpn1

IMPORTANT: I don't have a Cisco IOS Software: 12.4 (5), 12.3 (11) T08, 12.4 (4.7) PI03c,.
12.4 (4.7) T - there is error in the cryptographic module.

Hey guys, it's weird that the router is not find cert after IKE is the cert and validates, it is certainly not reason, but I would go ahead and set up the mapping of certificate on this router to force the client to associate with Group of IKE, for that matter, that you need to change your config a bit for use iskamp profiles :

http://www.Cisco.com/en/us/docs/iOS/12_3t/12_3t8/feature/guide/gt_isakp.html

Router w / Tunnel dynamic L2L and Clients VPN

Similar Questions

Maybe you are looking for