Rows should be changes based on the value of the user

Similar Questions

• Selectively hiding a row in a Table based on the value of the column

  I have a data control that is populated from pro-grammatically, based on the user's selection in the page one of wanting to hide some lines on page 2 at the same time, I don't want to delete the value binding, is there to hide the lines instead of column?

  To the table of the ADF, to hide the lines according to the requirement, use the visible property on each of the columns.

  For example, if you do not want to display all the lines that have IDs Director like 200 or 201.

  Thank you
  Nini

• Should I change ip of the router if I use the vpn - RV110W

  Hello:

  My RV110W ip address is 192.168.1.2. Now, I add a line to vpn clinet adjustment table. When I put the button Save page displays "to ensure the functionality.the good router need to change its ip address to 10.x.x.1. So. I need to know should I change ip of the router 10.x.x.1 order to use the VPN? It is very embarrassing because my devices are all set to the range of 192.168.1.x.

  Hello

  I'm sorry that you're having problems with your device.

  You are right, the router will force you to change the IP address when you try to date a new VPN user, if he always uses the IP address 192.168.1.X, in order to avoid problems when people connect remotely like this subnet is the most used, and if someone tries to connect remotely by using the 192.168.1.X subnet, then the connection will be rejected.

  Now, you don't really have to change if you don't want (I have no advice as the function is there for a reason and most likely you will have problems with the connection of users on the same subnet).

  What you can do is change the IP address that you want, create all VPN users and then change the IP address to you, this way you fool the router and you can keep your current IP address (even once, this is not recommended)

  I hope that was helpful, please let us know help.

• How to highlight a line in IR based on the user name

  Hello
  What is the best way to highlight a line in an IR, based on the user name. IE APP_USER.
  Suppose that if an APP_USER connect to the application, the line corresponding to the APP_USER international registration should only be highlighted.
  (The button change is not visible in IR)

  Hello

  Value of APP_USER is uppercase. Your name column values are lowercase.
  Example of code I have after string comparison is case-sensitive.

  I don't have to change your action Dynamics example JavaScript to convert the value of the cell uppercase

  this.affectedElements.find('table.apexir_WORKSHEET_DATA td[headers="NAME"]').each(function(i){
      var lThis=$(this);
      if(lThis.text().toUpperCase()=="&APP_USER."){
          lThis.parent().children().css({"background-color":"#55A955"});
      }
  });
  

  Now, it should work

  Kind regards
  Jari
  -----
  My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai

• Hide a metadata profile based on the user role.

  Hi all

  I need to hide a metadata profile (log, update) based on the user role page. I have added metadata to a rule like "change" and added the rule to the profile. Now I want the metadata submitted must be visible for couple of user roles (admin, contributor) and it should be hidden for other user roles. How to achieve this?

  The content Server: 11.1.1.8

  Thank you

  Maury

  (1) create a rule that allows you to hide the metadata for all roles

  (2) create a new one which will show use the condition of activation of rule with building userHasRole("contributor")

• I bought my computer from someone else. Change user accounts did not name of each file in the computer. How can I change or remove the user/name (my name) /document? __

  I bought my computer from someone else. Change user accounts did not take their name off of each (or more) file in the computer. How can I change or remove the user/name/document
  I have looked everywhere and changed user information and the name of the administrator. What can I do else?

  Hello flashgordonjxn,

  Who has ever done the installation of Windows, the installation program asks you to enter your name and optionally, the name of the organization. These registration information appears under recommended for in the general tab of the System when you click Start, click Control Panel, click performance and Maintenanceand then click System.

  To change see instructions below:

  1. Click Startand then click run.
  2. In the Open box, type regedit, and then click OK.
  3. Look for the following registry key:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
  4. To change the name of the company, follow these steps:

     In the right pane, double-click RegisteredOrganization. Under value data, type the name that you want, and then click OK.

  5. To change the name of the registered owner, follow these steps:

     In the right pane, double-click RegisteredOwner. Under value data, type the name that you want, and then click OK.

  6. Click Exit on the file menu to exit the registry editor.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Apex, language of login page set after the connection based on the user pref browser lang and application-based

  Hello

  Request Express 4.2.3.00.08

  I created an application of multi languaguage in which the language is defined by setting: FSP_LANGUAGE_PREFERENCE

  But the login page, I would like to than the login page to be displayed in the browsers language.

  The url of the application connection looks like as shown below but the & BROWSER_LANGUAGE. product always (English).

  f? p = & APP_ID.:LOGIN_DESKTOP: & SESSION. : FSP_LANGUAGE_PREFERENCE: & BROWSER_LANGUAGE.

  
  

  LOGIN_DESKTOP is an intermediate page that has one before branch header for the page of real connection if the FSP_LANGUAGE_PREFERENCE is set prior to the loading of the page.
  

  If I set the language set in this URL, it works as expected:

  f? p = & APP_ID.:LOGIN_DESKTOP: & SESSION. : FSP_LANGUAGE_PREFERENCE:nl - page Login Show in NL

  f? p = & APP_ID.:LOGIN_DESKTOP: & SESSION. : FSP_LANGUAGE_PREFERENCE:-see the login page in EN

  When I put the application to choose the language based on the browser language that it works, but then I am not able to have users to save their preferences for the next time they are connected.

  Any ideas on why & BROWSER_LANGUAGE. translates by "in" even though the language in the browser is different?

  See you soon

  Bottom

  OK, he stares at me

  For all those interested, this is how.

  Create a page additional empy (with alias page LOGIN_FORWARD_PAGE) and set the url to connect to the application of this new page and set the value of the application on BRANCH_TO_PAGE_ACCEPT:

  f? p = & APP_ID.: LOGIN_FORWARD_PAGE: & SESSION. : BRANCH_TO_PAGE_ACCEPT:

  On the page to create a pl/sql process submit before calculations similar to one below which affect the en language, if the browser is not NL (in Dutch):

  If upper (substr (owa_util.get_cgi_env ('HTTP_ACCEPT_LANGUAGE'), 1, 2)) = "NL" then

  : FSP_LANGUAGE_PREFERENCE: = "nl";

  on the other

  : FSP_LANGUAGE_PREFERENCE: = 'en ';

  end if;

  And create a branch to submit before the treatment which redirects to the current login page (the value of FSP_LANGUAGE_PREFERENCE is then already set and the application is configured to use this setting).

  After that loging in you can extract the FSP_LANGUAGE_PREFERENCE based on the user.

  BTW, I had to switch to 4.2.5 there in 4.2.3 is a bug preventing to set session state when you use BRANCH_TO_PAGE_ACCEPT!

• Based on the user dashboard sign on

  Hello
  
  I have to design a dashboard page that loads based on Department and users. The modules is in a table, the table has two columns, username and the Department.
  
  NOTE: There must be a dashboard page, but the content must be different depending on the user that connects.
  
  Department of user name
  User1 sales
  User2 sales
  The util_3 sales
  ACCT user4
  USER5 Acct
  Utilisateur6 Mktg
  USER7 Mktg
  
  .....
  
  How to start this project? Help, please.
  
  Thank you.

  Hello
  Create groups based on departments to the RPD, to groups such as sales, accounting, marketing etc... Assign users to specific groups (this means Department underspecific users). Create these groups in the web under manage Presentation catalog groups and users.
  Now, create a page with section per group.
  I mean
  Section1 - sales
  Section 2 - accounts
  Section3 - Marketing
  etc...
  I mean applying security for sections (section per group) properties of the section-> permissions and give access to a section specific to the specific group (remove the Everyone group) as I mentioned above.
  Now place the tha reports in sections according to your requirement. Sales in the sales section reports, accounts in the section and so on.

  If you want to create a report based on this table (user & dept). Apply security at the level of the table data in the presentation layer of RPD (right click-> properties -? permissions-> Filter tab), the value of dept assignment specific to a specific group, that filters the data in the dept column based on the user login.

  Hope this helps you :-)

  Kind regards
  Srikanth

• I have a corrupt user profile. Windows XP. When I add a new can be the same, or should be different. And the user's profile should match the user ID?

  Corrupted user profile

  I have a corrupt user profile.  Windows XP. When I add a new can be the same, or should be different.  And the user's profile should match the user ID?

  If the profile has recently become corrupted, you can probably get the same user by performing a system restore operation:

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  Otherwise, you will need to create another user and copy your data.  The simplest procedure is here:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

• What should I do to remove the user name of the saved list when I connect

  What should I do to remove the user name of the saved list when I connect

  I think maybe he's talking about the list that is displayed when you connect to a web mail service. It shows several previous usernames used. How to remove one of them from the list?

• Element of change based on the value in LOV

  I'm trying to disable the item (text box), based on the value of the LOV. And it doesn't seem to work.

  Is it possible to see what is happening in the level of the events? The LOV is perhaps not "changing" ing?

  Dynamically change the item values

  Patrick Wolf-Oracle responded to the question - get the firebug.

  Looking at the console I discovered that the returned of LOV value includes spaces. Resolved issues.

• error message Popup on change based on the value of selectlist

  Hello

  
  I am new to Oracle Apex. I have a selectlist in my page. I need popup, an error message when the value is changed according to the value of selectlist. For example, the selectlist can have "Approved", "Rejected", "Started", value "not started". When I changed the value "Rejected" if it is already "approved" a popup/inline error message should appear and say that we cannot change "Approved" to "rejected". Similarly, I need to have 5 these validations on the fly (when the selectlist is changed). Also when the condition is the error value will not change (in the previous example, the value will not change to 'Rejected'). Is there a way to do this?

  ~ Best regards,.

  Nadège

  Hi Jeevin,

  You can use jQuery or Javascript to manage validations customized to your selection list onchange.

  Something like

  OnChange = "your_custom_function (this.value); »

  and you can define your function as

  function your_custom_function (value1)

  {

  If (value1 == "Rejected")

  Alert ('Test Alert');

  }

  Logic may be all you need.

  It may be useful

  Thank you

  Sunil Bhatia

• Approver dynamic groups based on the user of the input values

  Hi all
  I need to create groups for approval in SOUL based on the input values by the user in a special SIT.
  For Ex: If the user eneters 'Yes' for a particular segment, I need to send a set of approvers and the user eneters 'no', so I need to send another group of approvers. Please let me know how it can be obtained by the SOUL.
  
  Thank you
  REDA

  Hello

  1 define an attribute in the SOUL who reads this segment of the table of transactions of SSHRC.
  2. create the conditions and rules based on this attribute to change permissions.

  Kind regards
  Laulagnet

• Change the command prompt based on the user login

  Hello
  
  I work in 11.1.1.5(11g) OBIEE. In my environment, OBIEE is integrated with OAM and user gets if authenticate in the OID Database.I a requirement where in cases that we have two users(user1,user2) and guest (prompt1, 2 guest)
  
  Example:
  If 1 1 user login prompt should get the display and 2 2 so quick connection of the user should get a good view.
  
  Can anyone help on this?
  
  Thank you
  Padmini

  With the help of the Administration-> catalog manage set permissions at the prompt and add the page. Based on the permissions that they might see respective guests

  If brand aid

• Hide sections in the dashboard based on the user group

  Hello everyone
  
  Can I find out if certain sections of the dashboard can be hidden using guided the usergroup-based navigation? Links to this topic... I appreciate.
  
  Thanks in advance

  Hello

  guided navigation is the way to go. Now, you think to demand that triggers the guided navigation.
  Now, you can not use double in a normal request in OBIEE. If you need to use an existing column in a topic area:
  (1) for example, add column 'Calendar year' of the size of your time at your request.
  (2) add the same column at your request.
  3) click on the fx in the second column column, to change the formula.
  (4) modify the formula to: LOCATE ('GroupName', VALUEOF (NQ_SESSION. GROUP OF))
  The value in this column will be 0 when the user is not a member of GroupName and > 0 when it is a member of GroupName.
  (5) add a filter on the column: LOCATE ('GroupName', VALUEOF (NQ_SESSION. GROUP)) is equal to 0.

  Check the results:
  When the X user is member of GroupName, demand will cause no line. When the user X is not a member of GroupName, it won't.

  A note: when using 'A' as a groupname, you will have problems with this, because 'A' is also in "Administrators".