Rules NoInput

Similar Questions

• Rules NoInput and FDM

  Hi guys,.

  I'm not really good with FDM, but I don't know if a NoInput rule will affect loading data through FDM.

  HS. NoInput ' V # < entity motto >.» RPTNG #GL_SAP

  This rule would make it impossible to FDM for loading data at this intersection? Could you please share your experience?

  Thank you!

  Anna.

  FDM for RPTING mapping, map GL_SAP to "ignore".

• Clarification of the journal

  Hi all
  
  I have a set of published reviews. I'm writing you now rule NoInput, that blocks the entrance to a specific C1 - dimension value Adj. combination There are existing journals, where the newspaper is displayed with these C1 - value member combinations.
  
  Should I wait until all the problems with the published reviews, after this rule is charged? If I unpost these newspapers, the future (to move to another Member of C1), after the charge of the State, the system will stop me their Unposting?
  
  Thank you

  You might want to be careful with this, you would be able to unpost entry, but you may not republish the entry. If you do something where you must republish the entry then you would need to disable the NoInput to republish the joint venture. The existing log would be fine and remain in the system, it would avoid future changes.

  Concerning
  JOINT TASK FORCE

• You can change the status to "Intercompany Is" an entity?

  One who put up my our HFM tag application some of the parent as intercompany and data enitites entered into these hubs. Can I remove the setting to put an end to this practice? What would be the result on the historical data?

  Here are a few ideas:

  Before removing the IsIntercompany flag on an entity, the parent or base, you must first remove all data and journals where the company has been used as a to another entity's intercompany partner. This is true for all periods, years and scenarios in the application. Next, you will need to re - load all data and journals and re - validate the data.

  The option above assumes that you want to change the past. However, if you can leave the past 'as-is', you can secure the entities in question by adding a class in the field of the entity as a partner and structure safety so as to prevent any person to ever reuse the entities as a partner.

  A final idea is to create rules NoInput.

  For a list of all the features of basic
  To list entities parent in question using a variable chain sEntity
  HS. NoInput "I #" & sEntity
  Next ' entity of parents
  Next ' base entity

  -Chris

• How can I create a NoInput rule effectively

  Hello
  
  My rule script skills are a bit rusty. I have a few accounts that I want to put has no entry, but I don't want to have 1 line per account:
  
  Noinput ' a L1234 #
  
  If I put in the account NoInput property in the area of the Usedefined2, could I write a basis of rules no. Input on the scope of Userdefined2?
  
  Noinput subroutine:
  
  NoInput "If HS. ACCOUNT. Node2 = NoInput
  
  End if
  
  Or should I use the list of accounts?

  You can create a personalized account list that contains all accounts with node2 = "NoInput" like this:

  Void EnumMemberLists()

  "# is a space reserved for when you go to copy the text in your list file, replace you it with the new number of total lists for this dimension
  Dim aAccountLists (1)

  Select HS case. Dimension
  Case 'account '.
  "# is a placeholder for the number correct to list specific when copy you the syntax into your list file aAccountLists (#).
  aAccountLists (1) = "AccountsUD2NoInput".
  GSA SetMemberLists aAccountLists
  Select end

  End Sub

  Void EnumMembersInList()

  Select HS case. Dimension
  Case 'account '.
  Select HS case. MemberListID
  "# is a placeholder for the exact number of the list when you copy this syntax in your file list.
  Case 1
  aLi HS =. Account.List ("", "[Basic]")
  For i = LBound (aLi) to UBound (aLi)
  If HS. Account.UD2 (aLi (i)) = "NoInput" Then
  GSA AddMemberToList aLi (i)
  End If
  Next
  Select end
  Select end
  End Sub

  The above code must appear in a file with the extension .lst and responsible members in HFM using the lists of members of load.

  Then your NoInput routine in your normal rules file would look like this:

  Void NoInput()

  aLi HS =. Account.List ("", "AccountsUD2NoInput")
  For i = LBound (aLi) to UBound (aLi)
  GSA NoInput "A #" & aLi (i)
  Next

  End Sub

  This way you do not check the UD2 during execution of the NoInput rule.

• HFM-rule error

  Hi guru,.

  I tried to do no entry to establish hierarchy with written code entities as loop statement is less than

  
  

  VOID NOINPUT()

  IF HS. SCENARIO. MEMBER = "REAL" THEN

  HS =. ENTITY. LIST ("SING", "[BASIC]")

  FOR i = LBOUND (has) to UBound

  HS. "" NOINPUT "E #" & a (i) & "

  NEXT

  END IF

  END SUB

  When you load this rule, obtain information such as the Validation did not... but no error showing...

  
  

  Please let me know what could be the reason that I am clueless and tried almost all of the things now.

  Thanks in advance

  Hello

  The validation error for some other reason... the rule is not able to validate the a (i)

  Try the following

  VOID NOINPUT()

  With HS

  HS =. ENTITY. LIST ("SING", "[BASIC]")

  FOR i = LBOUND (has) to UBound

  . "NOINPUT" S #Actual.E #"& a (i) &" ' "

  NEXT

  Ends with

  END SUB

• How do noinput operate according to a flag

  Dear,
  
  is it possible to put a condition to a noinput rule based on data?
  
  For example, I tried the following
  
  For each Acc in Hs.Account.List ("ASSET_T", "[Basic]")
  
  For each Ent in Hs.Entity.List ("ALLENTITIES", "[Basic]")
  
  HS = Activate_Input. GetCell ("a #CTRL_INPUT.") E #"" & sEntity & "." V # < entity motto >. I have #[ICP no]. # C1 [no]. C2 #[no]. C3 #[no]. C4 #[None] ") if Activate_Input = 1 then"
  HS. "NoInput" E # "& Ent &. A #"" & VAC & "." V # < entity motto >. C1 #CLO. C2 #[no]. C3 #[no]. C4 #[no]. "I #[ICP no]."
  End If
  
  Next
  
  Next
  
  But it did not work!
  
  It is essential please help me!
  
  TX

  If this has answered your question, feel free to mark it as answered and give points. If I get 1 000 000, I get a slim jim or something. :)

• Cannot load a rules file in my application of HFM

  I've updated a rules file in my QA environment and I could load it without any errors in the application of IFRSQA.
  
  After I tried to update my HFM application in the Dev Environment by loading the same rule file in the application of IFRSDEV, but it returns an error. The two applications are the same except for the rules file. It returns the error:
  
  Processing load file...
  Analysis of the rules of Calc...
  
  
  
  An error has occurred.
  Error: 800456 8
  
  
  Journal:
  --------------------------------------------------------------------------------
  Load started: 11:43:56
  Number of errors: 1
  Number of warnings: 0
  
  
  {D29035D0-EE9D-4C5F-8C26-BADDFD225157}1-214721419306/22/2010 11:43:56 AMLCLVWHQX40CHsvCalculate.cpp18049.3.1.0.2385
  Charge ended at: 11:43:56
  Duration: 00:00:00
  
  I went to the HFM error log viewer and I saw this:
  
  {D29035D0-EE9D-4C5F-8C26-BADDFD225157}
  Summary of Message System
  Engine script VB could not be initialized
  
  Any clue?

  I don't know exactly what it is, but it could be related to rules that runs automatically when loading:

  Secondary entrance
  Void NoInput

  And I think (but I am not sure):
  Public constants or variables

  Comment on these sections and re-load.

  Are there errors preceding this one, as it is a secondary error?

  -Chris

• Where are my rules of mail under macOS Sierra?

  Hello

  I lost all my rules of mail after upgrade to OSX 'El Capitan' to macOS Sierra.

  Appears that the rule of 'Apple News' as shown in the image below.

  

  Any help appreciated.

  Thank you.

  Rule files are stored in MailData folder in the Library/Mail/V4 of the user folder. Depending on what OS version you had previously installed, you can try to restore the files from a backup rules. Mail was listed in the folder V2 or V3.

  The rules are stored in a list of properties to:

  ~/Library/Mail/V4/MailData/SyncedRules.plist 

  Abandonment of post

  Restore the plist file

  Restart the messaging

  You will need to re-enable each rule. Check the destination file as well.

  Library of the user to see the

  The user library folder is hidden by default. In the unhide: select the Finder in the Dock. Less go in the Menu bar > hold down the Option key and you will see the library.

  Find the library user folder

  http://www.takecontrolbooks.com/resources/0167/site/chap11.html#FindingtheUserLi braryFolder

• Use the rules of mail or rules of Icloud or both?

  Which is better to use, rules of mail or Icloud mail?  If I create an e-mail folder of the Icloud on my Mac account it automatically appear in the Web page for Icloud but rules written on my Mac are not repeated in the page rules to Icloud.

  any advice?

  Thaks keith

  You can write rules more substantial in mail on your Mac, however if your mac isn't on you can end up with junk mail goes somewhere else until she is active, this behavior can be avoided by writing rules to iCloud.com.

  The choice that is best for your needs.

• Is it possible to create a rule for mail Search mail?

  I am trying to create a set of rules that would allow already read messages in folders by year. I can quickly find e-mail a year in research, it would be nice if I could create a rule right out of the research. I don't see this feature, but how can I create a rule which will find all the emails for a given year, and move them to a folder?

  Rules are usually set up for actions that are make again and again. What you describe will be just once, right?

  Do a search for the year you want, select all results, drag them to an appropriate folder.

• Table assignment 'rule' in Pages

  In the Pages, I have a table. Some cells are for opening numbers. How can I dictate a "rule" so that when a negative number is entered, he appears in italics. ?

  Select the cells > sidebar > cell > conditional highlighting... > add rule > less than 0 > > change red fill the italic > fact

  I didn't know that I expected.

  Peter

• The 'Reply To' field can be used in a Message rule?

  You appear not to able to search the Reply To field as part of the construction of a message anti-spam rule. Did I miss something - or could this feature be added to TB as soon as possible.

  Hoping this will help me nail a lot more spam I receive. Thank you very much.

  When you set up a filter, you should see a personalization option, where you can configure to filter on any field in a message header. Take care to study the source of certain messages first understand exactly what format it uses. "Answer to" appears as Reply-to:, so that you can add a custom field for answer to (without a colon).

• How to perform a soft reset rule soas can I open without download?

  the default value of the system is gone - and now the rule seems to be:

  download all email or system db attachments when clicked on...but i would like to have the option to open attachment /view without downloading/saving file. I would like to reset - so i have a choice.
  

  See this article:
  https://support.Mozilla.org/en-us/KB/applications-Panel-set-how-Firefox-handles-files

• Mac and Action Delete mail rules

  I use Mail 9.3 with El Capitan 10.11.6 and by mistake, I created an automatic e-mail rule that removed all email in my Inbox. This was due to accidentally clicking on the "If the following RULES are respected", instead of ALL. I got the error after about a week and have set.

  Is anyway to retrieve these messages that were deleted by this faulty rule? I looked in the trash and don't see some messages that I know have been sent to me during this period. Where will the messages that are affected by the "Delete" action in an e-mail rule?

  I tried to do a search in mail, Spotlight and Finder, but did not find the mails that I know have been sent to me while this flawed rule was active. Thanks in advance.

  If you do not have a backup of them, then they are gone. I you use IMAP mail, then once you delete a message it will be deleted from the server and are gone forever. How long that no matter how deleted mail grab is linked to your options of certain behaviors of the mailbox.