Contact of Smartphones Corrupt blackBerry causing problems with the rest of the contact list

Similar Questions

• BlackBerry smartphones, I'm having problems with the download of Facebook AGAIN! (need desperate help!)

  OK, so I deleted Facebook yesterday with the idea to reinstall later. He played a few times to the top and said: I can't reinstall it because I can restore it as it is in my archives. Whenever I try to restore it, he'd go to reinstall... in any case, I got rid of Facebook from my archives (after a few tries, to connect it to my computer and do it like that) so I will reinstall by click on reinstall, but that's the problem... Once it has downloaded, it will install again and this message is constantly "There was a problem during installation" I click OK and it is always uninstalled! It is VERY frustrating!

  Any ideas?

  Very much appreciated (BTW I'm new :/)

  OK, the * beep * I'm just rendered account Facebook download of Blackberry App World is NOT the only way how to download Facebook... I went on facebook mobile!

  Derr, sorry

• Fuze causes problems with the new Gigabyte mb

  I know this may sound weird, but with assistance from others and a lot of time to put into it, I found that the "rocket" poses problem with my new motherboard Gigabyte EP45-UD3R.

  I was getting problems strange behaviors and reboot, flaky stuff.  Once I reduced to my USB devices I then reduces it to the "rocket".

  Anyone know anything about this at all?

  I would have given this another day before posting.  But I have the answer and it will go here.

  In the BIOS with the EP45-UD3R (Gigabyte is not a brand off but very good Mo and has existed for some time - including Dell has used their) there is a setting under embedded devices.  It's called "Legacy USB Storage Detect". If this option is enabled it will attempt to boot from a USB device. The "rocket", like others, lights up as soon as your PC turn on.  It was trying to boot from the "rocket" and causing flaky problems.  Once that I disabled it the problem has been resolved.

  I should have taken myself.  Arghhh...

• Recovery system causing problems with the size of the screen.

  Due to some problems I had, I finally had to yield and perform a system recovery back to the manufacturer's specifications.  Once this is done, I downloaded all the updates to Vista, all the drivers, etc..  Everything is square and works fine now, with a big problem.  I bought a monitor 20 "a few months ago.  It worked fine before the recovery is done.  Since the resumption, the display is smaller, as if I still had the old monitor 15 '' on the system.  I did that the driver for the monitor is correct and up-to-date.  I found a way to enlarge the display of the size of the screen in an online search, but it does not clear up the problem.  For example... If I go to a site like the Pogo, the bottom of the site is almost normal size for the monitor, but the game pop up displays the size of the screen 15 ''.  I tried everything I know and can't get this last problem fixed.  Any suggestions would be greatly appreciated.  I also checked the resolution and makes sure it's OK for this monitor.  Thanks for your help.

  Do you have the driver from Microsoft or directly from the manufacturer?  If Microsoft, go to the manufacturer website and download THE latest drivers applicable on your screen and the version of Vista (Microsoft sometimes cause problems).  Does the monitor require any firmware - if so, download and install that too much of the manufacturer's web site.  You can also update the video card drivers and firmware just in case it is the underlying cause of the problem - again go to the web site of the manufacturer to get the files rather than using those available through Microsoft.

  Go to start / Control Panel / customization / display settings / and make sure that your monitor is displayed in the drop-down list.  If this is not the case, click on the box and see if you can find your monitor and then select and make the box extend the desktop to this monitor is selected.  Go into the advanced settings, click list all Modes and try one at the top, if it is not already selected (assuming that it is appropriate for your monitor).  If this does not help, try others that are compatible with your monitor to see if you can find one that allows you to achieve your goals.  It may not work, but it's probably worth a try.

  Other than that, I don't know what to think.  You already seem to have covered most if not all of the bases.  If the above does not work, maybe someone else review this thread will have other ideas to offer.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Icon Smartphones New blackBerry: blue box with the letter 'f '?

  I just got a new icon on the top of the screen to the left of the notification e-mail.

  It is number 1, with an orange dot and a blue frame with the small letter 'f' in white inside the box.   I have never seen it before and have no unread e-mail or text messages, or any unknown voice messages.  Nobody knows what it means?

  Ken

  You have installed the Facebook application and you hae a new message.

• Problem with the selection list dynamic LOV using bind variables

  I have the following SQL to fill a selection list:
  
  Select d, ch from
  (
  Select ft. FAMT_NAME d, pi. R FAM_ID_T of FAMILY_TRA ft
  Join the ck list
  on ck.family = ft.famt_name and ck.newseq in (: NEWSEQ_QUERY_SQL)
  )
  
  Where NEWSEQ_QUERY_SQL is a part of the application that is defined by a calculation of page and essentially returns a list of values NEWSEQ based on some parameters of the user query. For example:
  
  Select distinct (ck.newseq) in the ck list where rownum < 20
  
  The query above works fine with SQL Developer and returns two columns needed (display_value, return_value)
  
  However, it returns no line, when it is used to fill the LOV to a selection list.
  
  If I replace the: NEWSEQ_QUERY_SQL with a list of NEWSEQ hard-coded, it works:
  
  Select d, ch from to)
  Select ft. FAMT_NAME d, pi. FAM_ID_T r
  of FAMILY_TRA ft join checklist ck on (ck.family = ft.famt_name and ck.newseq in ('K0242900', 'K0217200'))
  ) ;
  
  I can even replace: NEWSEQ_QUERY_SQL with hard-coded SQL and it works:
  
  Select d, ch from
  (
  Select ft. FAMT_NAME d, pi. R FAM_ID_T of FAMILY_TRA ft
  Join the ck list
  on (ck.family = ft.famt_name and ck.newseq in (select ck.newseq from the list ck where rownum < 20))
  )
  
  But if there is a connection variable (: NEWSEQ_QUERY_SQL), it doesn't.
  
  Selection lists are driving me crazy! They seem incredibly capricious.

  Hello:

  You cannot link a "sql statement" that bind the value you're trying to do.
  P2_FAMILY_LIST must be the SQL statement you executed for the LOV. Something like

  select d, r from
  (
  select ft.FAMT_NAME d, ft.FAM_ID_T r from FAMILY_TRA ft
  join checklist ck
  on (ck.family = ft.famt_name and ck.newseq in (select ck.newseq from checklist ck where rownum < 20))
  )
  

  CITY

• BlackBerry Smartphones having a strange problem with the Blackberry AppWorld

  Just got my phone a week ago so I'm still new to this.  I was able to download applications directly from the AppWorld on my phone.  What I'm trying to do is to access the AppWold from my computer to find applications and download them on my phone.  It is easier to find and watch the computer.

  During the SystemCheck to download the app, when you select the PIN code and click on connect, I get a message that might have stopped a script on this page.  If you click on continue, I get an error message saying "device.legacyfail.header".

  Don't know what it would be.  It isn't a huge deal, because I can get the apps from my phone, but I'm a little curious what it would cause.

  I would appreciate any info people have on it.  Thank you!

  He did get resolved.  It was my phone had an older version of the app AppWorld or the desktop software was an older version.  I seem to remember it was the AppWorld application that needed the most recent version.  I think that after a day or 2 there is a update for the app for me to download.

  Sorry I don't remember exactly what happened, but I know for sure, it was one of those two things.

• BlackBerry Z10 problems with the battery while using the LTE

  Given that I am connected to LTE (4 G) battery is not longer than 8 hours. Is this normal?

  Use of the battery can vary from one user to another, based on dozens of factors, including running applications, intensity of the mobile signal, the overall health of battery, use of data, etc. There is no use of a normal battery without comparing many factors.

  But 8 hours use of the battery can be normal that Q10 with moderate to heavy use in an area with a great LTE signal at least.

• ESX iptables, causing problems with the Server 3.5

  Hello

  ESX server is restarted.

  It is quite a large number of iptables rules prevents our monitoring system to check the memory disk, traffic, etc...

  I tried to delete all using iptables - F, but the system crashed and I had to connect through the ILO to reboot the system.

  is there a way to disable / remove all rules in iptables on an esx Server? We have other firewall in our infrastructure, we do not really need iptables or firewall installed with esx.

  Otherwise, what is the method for open access to a port or request so that we can temporary open the necessary port for our monitoring system?

  Thanks in advance

  Mario

  After excuting

  esxcfg-firewall - allowIncoming

  esxcfg-firewall - allowOutgoing

  You should get the following when you run iptables-L

  INPUT string (policy ACCEPT)

  target prot opt source destination

  Chain forward (policy DROP)

  target prot opt source destination

  Chain OUTPUT (policy ACCEPT)

  target prot opt source destination

  The esxcg-firewall command changes the rules in iptables on the ESX server host. I used iptables f to rinse the rulesets in the past (this change can not resist reboot as the configuration files are not changed), but it is recommended that any firewall adjustments using esxcfg-firewall.

  Try the firewall chkconfig--level 3

  diasable firewall after erasing rules.

  To activate just firewall chkconfig--level 3 on , then Start firewall service

  esxcfg-firewall - blockIncoming

  esxcfg-firewall - blockOutgoing

• Text in bold Safari causing problem with the Spry menu bar

  I made a web site using a Spry menu bar. It worked fine in all browsers, as far as I knew. I was just alerted by owner esite th that the menu bar was the last link off position seen in Safari. I don't know when this started happening. I noticed that the text in Safari is more bold than firefox or IE. My guess is that this is the problem. I searched on google for help and found this

  Add-text-shadow: 0 0 0 #000; to the css.

  I tried but it don't seem to have any effect.

  the site is here:

  http://www.telluridegravityworks.com/

  Can anyone offer advice on how I might solve this problem? Thank you!

  I don't see the problem under Win 7/Safari (guess it's a question of Mac) but I see it in Win 7/IE9.

  In the CSS file, http://www.telluridegravityworks.com/css/gravity-works-winter.css

  set the width of the container navbar fix here

  {#nav - menu
  Width: 455px; / * adjusted to 445px * /.
  padding: 0px;
  overflow: hidden;
  float: left;
  margin left: 515px;
  }

• "Info" button can be removed without causing problems with the width of the PlayBar?

  I am using Captivate 3 and my project has located BlackGlass PlayBar at the bottom left of the glide without border. I am currently it show with fair return fast, play/pause, mute and the info button. With these buttons the playback bar is very small and compact, end just after the info button, vaguely resembling this:
  
  < [back] _ [break] [Mute] _ [Info] >.
  
  That's what I need (other than the button "info") that I have my own controls appearing next to him on the slide.
  
  I have been in the fla file to remove the info button (removed from the library), but have found that once I did this, the bar then the screens with a long strip of the black background to the right, like this
  
  < [back] _ [Pause] _ [Mute] _ >
  
  that covers my controls and prevents it from working.
  
  Is there a way to get rid of the info without the playback bar button it?

  Try maybe let the more info button in the FLA, but making it 1pixel wide without border?

  If this does not work, you must stop by the site Web de RaisingAimee de Paul Dewhurst. For those who provide a donation, it has a section on its website with all its bars updated available for download:

  http://www.raisingaimee.co.uk/index.php?option=com_docman&task=cat_view&GID=28&Itemid=36

  Kind regards
  John

• It seems that the update of Firefox causes problems with the Mac. Should I upgrade to 4.0.1 if it works? I have a Macbook Pro and you have upgraded to Lion.

  I tried to update to FF, since I got Snow Leopard and he just kept spinning and cannot connect. Now I see that maybe there is a good reason.

  Try the alternative and easier way by downloading here

  • getfirefox.com

• Problem with the playback list in Safari 10.0

  I upgraded to Safari 10.0 and can no longer remove items from the playlist.  The small x in the upper right corner that appeared does not work.

  MacBook Air 2013 El Capitan 10.11.6

  Right-click on the item you want to remove.

  If you like the old way better, inform Apple.

  To send comments directly to Apple, use this link: http://www.apple.com/feedback/

• Problem with the folder list

  Hello

  I try to use the folder list to the list of all the files in the folder of LVM. However, I get this error message when I run the VI.

  I tried to key in the pattern such as *.lvm or even using the loop, still do this out of the error message. Please help me.

  See you soon

  PX

  

  Hi PX.

  I guess you must enter a folder instead of a path of the file LVM.

  Hope this helps,

  Mavis

• Software BlackBerry made Blackberry connection problems with Outlook 2003?

  I tried to look through the forums to see if theres any other mention of this but could not find something but it definitely seems to be a problem with one of our PC

  My wife has a Win XP SP3 system and running Office 2003 and 2003 Ourlook which, until the installation of Blackberry link worked fine.  When she installed link BB and hung the BB Z10, there was questions first with him saying she had no Media Player installed... She did it... Finally after reinstalling the BB link a few times he seemed to get the message and was able to see Media Player... everything seemed fine, but I was puzzled as to why the link / Unit decided to create a new network icon for Blackberry virtual private network?  After using the link and its Z10 a few days ago she noticed that when she ran outlook 2003 on the system for some reason, she was unable to receive the incoming pop3 to his two accounts mail. She got the following error message...

  Task 'pop.gmail.com - receiving ' reported an error (0x800408FC): "the specified server name is found on the network (it might be down temporarily).» Please check that you are connected and that the server name is correct. »

  I messed around with the system for a few hours Googling the problem and changing the settings and then change their return but nothing seems to change... and then, after a restart (with not really changed parameters), he started working again?  Last night she again connected the Z10 and ran link synchronized music to his device and then tried to collect e-mails via outlook and he starts again giving an error?

  Although I am very HE warned I have only a limited knowledge of the comms etc but I think it might be something to do with the use of IPv6, we use Plusnet as an ISP and according to me, they work mainly on IPv4 currently, while we have installed IPv6 protocols check States online do not use us actually use IPv4 instead.

  I have so far not been able to solve the last problem that outlook always gives the show of error above, although on the verification of the account set up, it shows that it is configured properly and always allows him to send an email from outlook and she can always send and receive on the Z10

  Any advice on what to try to resolve this situation would be received with gratitude...

  Savel'evna

  Hey Savel'evna,

  Thanks for the quick response.

  I am pleased to see that we have highlighted in this one machine, if you will not tie the Z10 BlackBerry as modem then you can keep the VPN BlackBerry off.

  Another that what could it be causing a conflict with the BlackBerry VPN, to be honest, I have an application that causes problems with the BlackBerry VPN connection and I have to turn off sometimes.

  Feel free to let me know if you have any other questions.

  See you soon.