run as administrator does not work after you use netplwiz to change the name of the account

Similar Questions

• Why the highlighting of text in a PDF document does not work after you save the file

  Why the highlighting of text in a PDF document does not work after you save the file

  What application you use to highlight?

• print DigitalPersona finger scanning does not work after you install the recommended updates

  My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista

  Hello

  1. do you have an error message?
  2. are you referring to the print scan hardware or software scan print that was supplied with the device?

  Method 1:
  I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

• my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?

  my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?

  I downloaded the former driver of windows 7 touchscreen and it worked

• Game Center does not work after update to ios9.2 also the games who need freezing when loading so I can't play you can solve this problem, so I can play games on my ipadmini2 again?

  Game Center does not work after ios9.2

  problem known, search the Forum, many details.

• Laptop does not work after you remove the virus win32/winfixer

  Original title: win32/winfixer

  I had cleaned up my n cell phone it's a bad virus win32/winfixer and now my laptop does not work because I deleted it and also my big computer will not work right there problem downloading it says it needs to microsoft.net1.1sp1 ep, but it does not load become crazy pls help me...

  Hello

  1. what exactly happens when you start on the desktop?

  2. you get any error message?

  3. is your laptop work fine in safe mode?

  4. What are you trying to download?

  5. How are you trying to download?

  6. What is the full error message do you get?

  7. don't you make changes to the computer until the problem occurred?

  I suggest you to see link below and check if it helps.

  Method 1: How to fix a computer that does not start.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041

  Hope this information is useful.

• Cascades - Vertical alignment does not work after you add a higher container

  Hi all

  I am facing a problem with vertical alignment... Trying to play and to imagine a way to transfer my apps to BB10, I wanted to create a page layout and Center my components in the center of the screen. I created the necessary containers and things, it worked, but then, my baggage was obviously only in the center of the screen too.

  So I decided to add a top-level container that would hold only the background. But then, my content is not centered (in the container for the child). I do not understand why and I don't know I'm missing something.

  Here is the structure:

  {Page}
  content: container}
       
  layout: {StackLayout}
  }
  background: Color.create ("#555555")
  {Of container
  layout: {StackLayout}
  }
  horizontalAlignment: HorizontalAlignment.Fill
  verticalAlignment: VerticalAlignment.Center / / DOES NOT WORK
              
  {Of container
  horizontalAlignment: HorizontalAlignment.Fill
  layout: {DockLayout}
  }
  {Label
  text: "save location".
  horizontalAlignment: HorizontalAlignment.Left
  verticalAlignment: VerticalAlignment.Center
  textStyle {}
  Base: tsd1.style
  }
  }
  ToggleButton {}
  horizontalAlignment: HorizontalAlignment.Right
  }
  }

  Anyone have any idea on this? Is there a simple way to have centered on the content with a background full screen? I tried a lot of different ways, but none gave me the result I wanted (except setting a padding but that is not as I wanted).

  Thank you

  Add an empty container with spaceQuota 1 down. It will take all of the remaining space.

  Container {
    layoutProperties: StackLayoutProperties {
      spaceQuota: 1
    }
  }
  

  If you want to Center controls, adds another container empty in front of them.

  Also try to play with preferredWidth: Infinity / preferredHeight: Infinity and modes of different adjustment (filling or Center).

• HDMI port does not work after you refresh the computer.

  Updated my computer and now my HDMI port does not work. I can not connect my labtop to TV.

  Are you sure that the additional monitor is turned on.  Try holding down the and then press P until it is selected to extend the screens.

  If this does not work, go to your computer manufacturer's website and download and install the latest version of your graphics drivers.

• S7-392: touchpad does not work after you connect an external mouse

  I plugged my Logitech Performance Mouse MX my S7-392 yesterday and since then the touchpad doesn't work anymore, not even when I disconnect the mouse. I used another front (wired) mouse, and there is no problem with touchpad. I tried to reinstall the driver from the Elantech touchpad, which did not help. Also started Windows in safe mode, but the touchpad still does not work. I'm on Windows 8.1. Maybe somebody has the same problem?

  Hello...

  On the top row of the keyboard, thr wil b a button with the symbol 'a helping hand on the touchpad. Locate this button (probably the 7 key). Press and hold down the FN key and then press this button. This wud help.

  Hope it works...

• Call the native browser blackberry OS6 does not work when you use this line Browser.getDefaultSession () .displayPage (url);

  Hello

  I need to invode a native browser showing a Web site using the code below

  Browser.getDefaultSession () .displayPage (url);

  She works in OS5, but does not work for the OS6. Please, someone knows how to solve this problem, too much to guide me

  regards + thank you

  codemobiles.com

  Oh, thanks for your response. (the browser is not called, there is nothing happen)

  Hoowever, the problem is resolved. That's my problem forget to add the "http://" in the url.

  regards + thank you

• Bland Muse - States Panel - Adobe does not work when you use images of filling

  Hi all

  I have a filled rectangle with an image using the control panel of the padding in Muse. I want the rollover State to present a slightly modified image. I have change the rollover State in the States Panel and check the option melted and set it for ease in/out to 0.5 s.

  When I preview/publish my site, the fade does not work. The image flashes just as he would have before the last update.

  The works of bland on the text very well or if I wanted to reduce the opacity of the image in the rollover State, but not one filling to another. Why is this?

  Thanks in advance.

  I see in Firefox, it isn't the transition but Safari it is. So I suspect that this is probably the browser compatibility to have a transition of filling.

• Internet Explorer does not work after you install the kb2761451 update

  Original title: I downloaded the update and now Internet security security update kb2761451 explore does not open.  So I deleted it and Explorer opens.  This update is listed as important.  What should I do?

  The Explorer is 9.

  Hello

  Thanks for posting the question in the Microsoft Community!

  Internet Explorer stops working after the update kb2761451 is installed.

  The problem may occur if the updated components are corrupted.

  I suggest you follow the steps mentioned below:

  Method 1: Of reset Windows Update components

   

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: run the Update of the system analysis tool

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Windows Update does not work after you reinstall Windows XP SP3, get error: "the site has encountered a problem and cannot display the page you are trying to view.

  Original title: cannot run Windows Update

  I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues)

  Can someone help me please?  Thank you.

  I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues)

  Can someone help me please?  Thank you.

  [1] select start > run > wuaucpl.cpl > disable automatic updates > apply (if the setting is changed) > OK

  To disable the horse notification that appears in the status bar on automatic updates is turned off.

  Go to start > Control Panel > Security Center > resources > change the way Security Center alerts me > uncheck automatic updates

  [2] manually download the full install for IE8 exe and install IE8 and refuses to download updates at the time of the installation of IE8

  http://www.Microsoft.com/en-us/download/Internet-Explorer-8-details.aspx

  [3] manually download and install the latest cumulative security for IE8 update and restart the computer before

  visit windows update via the shortened link in your Start menu.

  When you have Win XP SP3 and IE8, it will be the necessary file recommend you download and save the file in the folder, and then double-click on and run the executable file from there.

  http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

  Restart after installing IE8 cumulative security update.  It should restart when installation is complete.

  [4] now to connect to windows update manually through your browser using the shortcut in the start menu link.  Ignore the warnings, recommendations to turn on automatic updates.

  Report back please on the status and please report problems with error codes. Thank you.

  Recommend you not install MSE but rather install a free antivirus like Avast or AVG.

  Recommend also you do not install Windows Search 4.0 these programs not to live pleasantly on most XP machines and cause CPU excessive loading unpredictable and inconveniently sometimes interfering with the usual ability to XP if not to multitask without problems.  Also recommend you only install Firefox is a browser much better than IE8 that will not work even at many Web sites.

• sound does not work after you reinstall

  Original title: I had to reinstall xp on my computer after doing so, I can not speaker working

  can anyone help, I can't get my speaker to work after reinstalling Windows xp, because they don't have any softwear with them

  Perhaps, you resorted to reinstall windows because your computer has become unstable because of a faulty hardware, such as a system driver or faulty hardware under sound.

  in all cases, you should try to re - install all software and hardware drivers on your computer directly from its place of origin.

  In addition, it is unclear if you do or you don't have a card its pci added to your motherboard at the moment.   But if you do, then you will need to re - install the software and drivers of its place of origin.

• Internet does not work after you set up parental controls.

  I just create a new account and set up parental controls for it. Before I did the internet worked, but after you have configured parental controls, internet would not just work for my desktop which has a direct line.  I have a router and even after, the wifi signal and internet would always work however my line connection direct wouldn t.  I continued doing to solve the problem and start system restore, but every time I tried to set up the account with the internet parental control just doesn't work.

  Thanks in advance.

  
  

  Hello

  Maybe there's a settings problem.

  See this and the 'related links '.

  How to install and use Parental controls in Vista
  http://www.Vistax64.com/tutorials/95139-parental-controls-Setup-use.html

  and these:

  Setting up Windows Vista's Parental control
  http://www.bleepingcomputer.com/tutorials/tutorial139.html

  Set up Parental controls
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.