Run the flash with external html buttons function

Similar Questions

• Satellite A300 - how to use the recovery with external DVD drive disc?

  Hello

  I bought a toshiba Satellite A300 - 15 d

  FTM the tsscorp drive that is installed in the camera no longer works (does not detect any type of media what so ever). ) need to recover the laptop, so I used a USB DVD drive to boot from the restore disc, but after that the charges of recovery console it says waiting for media in the f: drive, which is the tsscorp drive although I used an external drive to load the disc.

  What files should I edit to make it to load from the drive externally and if this isn't the solution, what do I do?

  Thanks in advance

  Hey Buddy,

  Unfortunately I think that it of not possible to use the recovery with external CD/DVD drive disc. Therefore, place the internal for use the recovery disc.
  You can get a new drive to an authorized service provider.

  But if the original OS from Toshiba is installed, you can use the function of disk recovery HARD reinstall Windows as well. Go to the advanced boot menu (F8) and select Repair my computer :)

• PL/SQL to run the exe with the DB settings

  Hi all
  
  I have a little problem.
  
  I'm in the need to write that all connection, disconnection and connection fail data to the Windows application log. To do this, I already tried various solutions, but with my configuration (EE Oracle 10.2.0.4) and Windows Server 2003 R2 X 64 the only possible solution is (apparently) the following.
  
  I create a Table with the information I need:
  
  --------------------------------------
  
  CREATE TABLE logonaudittable
  (
  event VARCHAR2 (15).
  SID NUMBER,
  series # NUMBER,
  time DATE,
  name VARCHAR2 (30),
  osuserid VARCHAR2 (30),
  MachineName VARCHAR2 (64)
  )
  /
  --------------------------------------
  
  I have create a trigger for the connection data, one for logging for the logon fails:
  
  ------------------------------------------------
  
  LOGON trigger.
  
  Database of logonauditing AFTER logon ON CREATE OR REPLACE TRIGGER
  DECLARE
  MachineName VARCHAR2 (64);
  osuserid VARCHAR2 (30);
  v_sid NUMBER (10);
  v_serial NUMBER (10);
  
  CURSOR c1 IS
  SELECT sid, serial #, osuser, machine
  FROM v$ session WHERE audsid = userenv ('sessionid');
  BEGIN
  OPEN c1;
  EXTRACT the c1 IN v_sid, v_serial, osuserid, machinename;
  
  INSERT INTO logonaudittable VALUES ('CONNECT', v_sid, v_serial, sysdate,
  user, osuserid, machinename);
  
  CLOSE c1;
  END;
  /
  
  -----------------------------------------------
  
  Logoff trigger
  
  CREATE OR REPLACE TRIGGER logoffauditing
  BEFORE logoff ON database
  DECLARE
  MachineName VARCHAR2 (64);
  osuserid VARCHAR2 (30);
  v_sid NUMBER (10);
  v_serial NUMBER (10);
  
  CURSOR c1 IS
  SELECT sid, serial #, osuser, machine
  FROM v$ session WHERE audsid = userenv ('sessionid');
  BEGIN
  OPEN c1;
  EXTRACT the c1 IN v_sid, v_serial, osuserid, machinename;
  
  INSERT INTO logonaudittable VALUES ('LOGOUT', v_sid, v_serial, sysdate,
  user, osuserid, machinename);
  
  CLOSE c1;
  END;
  /
  
  -------------------------------------------------------
  
  Logon trigger FAILS
  
  CREATE OR REPLACE TRIGGER logonfailauditing
  AFTER ON SERVERERROR database
  DECLARE
  MachineName VARCHAR2 (64);
  osuserid VARCHAR2 (30);
  v_sid NUMBER (10);
  v_serial NUMBER (10);
  
  CURSOR c1 IS
  SELECT sid, serial #, osuser, machine
  FROM v$ session WHERE audsid = userenv ('sessionid');
  BEGIN
  IF (IS_SERVERERROR (1017)) THEN
  OPEN c1;
  EXTRACT the c1 IN v_sid, v_serial, osuserid, machinename;
  INSERT INTO logonaudittable VALUES ('FAILLOGON', v_sid, v_serial, sysdate,
  user, osuserid, machinename);
  CLOSE c1;
  END IF;
  END;
  /
  
  -------------------------------------------
  
  The I create a trigger that starts each time something is written on the table.
  This trigger must start an EXE file which writes the last data written on the table in the Windows application log.
  
  So I need a trigger that executes my WRITELOG. EXE file adding parameters. For example:
  
  Run WRITELOG. Event time username sid EXE
  
  So my program will write a journal in Windows with these data:
  
  Event: opening of SESSION
  SID: 2938473
  Time: 12/12/2011 11:45:32
  User name: Scott
  
  And so on.
  
  I already have the program that does this, I need to run the program with the right data directly from trigger or procedure performed by my trigger.
  
  Hope that I was clear and REALLY hope that someone can help me!
  
  Thanks to you all!

  So practically I should create a job something like this:

  BEGIN
  () dbms_scheduler.create_job
  job_name-online "CONNECTION."
  job_type-online "EXECUTABLE."
  job_action => ' c:\yourdirectory\FILE. LOGON EXE ' | v_sid | » '|| v_serial | » '|| to_char(sysdate,'MM/DD/YYYY') | » '|| the user | » '|| osuserid | » '|| MachineName |';
  number_of_arguments-online 1
  start_date => SYSTIMESTAMP,
  enabled-FALSE, online
  comments => ' SQL * Loader jobs Demo');
  END;
  /

  and then I need to start this work every time that the LOGON trigger fires and it must be the trigger that inserts into the work, the arguments v_sid, v_serial, etc..

  ... I don't know how I can do this. What I need to create a procedure that creates jobs and the procedure is executed by the trigger? and how do you know the procedure to create the job with the data provided by the trigger. Sorry I ask much for the help, but I need this thing made in a time which is not compatible with me studying how to do it by myself. I will look at it, I want to know exactly how these things work, but now I need to speed things up a bit!

  Thank you for all the valuable assistance tfor!

• Run the report with parameters when, select the Radio button

  HelloW Guys
  
  I run my report with the report parameter form now, I want to when I select a radio button and then check if my only the list value = 1 then run A report if my only the list value = 2 then launch report B
  
  Report A and B contain the same parameter
  
  What can I do?
  
  I am writing this trigger button
  DECLARE+.
  al_button NUMBER; +
  pl_id PARAMLIST; +
  pl_id2 PARAMLIST; +
  START to+.
  IF: type = 'A' THEN+.
  IF: RepType = "1" THEN+.
  * pl_id: = Get_parameter_list ('repPara'); -create a parameter list * +.
  
  IF not Id_null (pl_id) THEN+.
  Destroy_parameter_list (pl_id); +
  END IF; +
  
  pl_id: = Create_parameter_list ('repPara'); +
  
  Add_parameter(pl_id,'PARAMFORM',text_parameter,'NO'); +
  
  * Add_parameter(pl_id,'style_from',text_parameter,:style_from); -passing style ano parameter * +.
  
  * Add_parameter(pl_id,'style_to',text_parameter,:style_to); -passing style not as parameter * +.
  
  * Add_parameter(pl_id,'date_from',text_parameter,:date_from); -passing date as parameter * +.
  
  * Add_parameter(pl_id,'date_to',text_parameter,:date_to); -by the way that date as parameter * +.
  
  * Add_parameter(pl_id,'category',text_parameter,:category); -passing as the parameter category * +.
  
  
  
  Run_product (rapports,'E:\inventory\Dispatch\d_style_wise_dispatch_Stitching_report.rdf ',+)
  asynchronous, runtime, the file system, pl_id, NULL); +
  ELSIF: Reptype = "2" THEN+.
  pl_id2: = Create_parameter_list ('repPara2'); +
  
  Add_parameter(pl_id2,'PARAMFORM',text_parameter,'NO'); +
  
  * Add_parameter(pl_id2,'style_from',text_parameter,:style_from); -passing style not as parameter * +.
  
  * Add_parameter(pl_id2,'style_to',text_parameter,:style_to); -passing style not as parameter * +.
  
  * Add_parameter(pl_id2,'date_from',text_parameter,:date_from); -passing date as parameter * +.
  
  * Add_parameter(pl_id2,'date_to',text_parameter,:date_to); -by the way that date as parameter * +.
  
  * Add_parameter(pl_id2,'category',text_parameter,:category); -passing as the parameter category * +.
  
  
  Run_product (rapports,'E:\inventory\Dispatch\d_style_wise_dispatch_Delivery_report.rdf ',+)
  asynchronous, runtime, the file system, pl_id, NULL); +
  END IF; +
  END IF; +
  END; +
  
  Need help
  
  
  Concerning
  
  
  Wasim Ismail

  Dear Shahzab,

  As the parameters except a report type are the same, you can accomplish this task by comparing the type of report just before Run_product.

  You need to re - write the code as below:

  DECLARE
  al_button NUMBER;
  pl_id PARAMLIST;

  BEGIN
  IF: type = 'A' THEN
  IF: RepType = "1" THEN
  * pl_id: = Get_parameter_list ('repPara'); -create a parameter list *.

  IF this is Id_null (pl_id) THEN
  Destroy_parameter_list (pl_id);
  END IF;

  pl_id: = Create_parameter_list ('repPara');

  Add_parameter (pl_id, 'PARAMFORM', text_parameter, 'NO');
  Add_parameter(pl_id,'style_from',text_parameter,:style_from);
  Add_parameter(pl_id,'style_to',text_parameter,:style_to);
  Add_parameter(pl_id,'date_from',text_parameter,:date_from);
  Add_parameter(pl_id,'date_to',text_parameter,:date_to);
  Add_parameter(pl_id,'category',text_parameter,:Category);

  IF: type = 'A' THEN
  IF: RepType = "1" THEN
  Run_product (rapports,'E:\inventory\Dispatch\d_style_wise_dispatch_Stitching_report.rdf ',)
  asynchronous, NULL to run, the file system, pl_id,);
  ELSIF: Reptype = '2'
  Run_product (rapports,'E:\inventory\Dispatch\d_style_wise_dispatch_Delivery_report.rdf ',)
  asynchronous, NULL to run, the file system, pl_id,);
  END IF;
  END IF;
  END;

  Concerning
  Fassi Fihri

• Run the application with the admin rights

  Hello

  I am a network administrator and I have problems with an external application. While running the application does not require local administrator rights, the software does an automatic updates check when it is launched. There are updates once a week. If the application is launched without administrator rights, the software does not check. Our users do not have local administrator rights. The result is that the application gets overwhelmed and an administrator needs to log in order to to refresh.

  Here are the solutions I've tried so far:

  1. I ran the application using the command runas , which works, but is not practical as an administrator will have to provide the password every time.

  2. change the compatibility of the application to 'RUN as administrator'. I have disabled UAC to make this work, but the user must always supply a password. I could create a locked user who cannot log on to any machine, etc, etc, but this seems like a stupid solution. I might as well give all admin rights.

  3 to research more, I tried to use RunAsSpc (http://www.robotronic.de/runasspcEn.html). This seems to work well and did exactly what I'm looking for, but created two issues: no drives mapped and an access violation when printing that I won't have to worry about troubleshooting.

  I had to give all users local administrator rights until I have a solution. Is it possible to allow the application to do its updates without granting full administrator rights to the entire system? Any recommendations?

  Yes, let the program provider to build their program cleverly.  It is not going to be a solution to this.

  Otherwise, you will need to just have someone who has admin rights not login once a week and install the necessary updates.  A bit like Microsoft Office Update (requires an administrator to do so).

• How to change the callback of a GUI button function?

  I would like to change the callback function associated with a GUI button dynamically in the programming track.

  Here is the piece of code that I tried, but it doesn't seem to work:

  const char * pstrLabelSaveJpeg = "SaveJpegCb";

  SetCtrlAttribute (pahel_id, ctrl_id, ATTR_LABEL_TEXT, pstrLabelSaveJpeg);

  int CVICALLBACK SaveJpegCb(int panel, int control, int event, void *callbackData, int eventData1, int eventData2);

  The attribute that you used is the 'label' of the button.

  It is only an appearance attribute. You can write your own name on it, but this does not alter the callback function.

  You must change the ATTR_CALLBACK_FUNCTION_POINTER attribute, and you shall not take the name of the function as a string.

  If your function call will look like this:

  SetCtrlAttribute (pahel_id, ctrl_id, ATTR_CALLBACK_FUNCTION_POINTER, SaveJpegCb);

  Of course, you must declare the function SaveJpegCb somewhere above this line.

  I think you have already done this.

• I accidentally put to run the exe with adobe PDF viewr files and can't find how to cancel it

  I was running an exe file and accidentally did something and now he's trying all the files with the adobe PDF Viewer running and I can't undo. Help, please.

  See this tutorial.

  http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html?filter [2] = file Folder settings

• Red field when I try to run the script with 10G

  I recently installed 10G XE. I am able to create a new user and was trying to run a script for JustLeeBooks on the site of Thompson Course Technology books. I downloaded the files on my computer and then entered the new user and viewed and downloaded the script. The area where appears the script is all red. When I click on run, nothing happens. This script box are red like that?
  
  I can click on remove and delete the script, but I can't seem to run the script.
  
  What should I do to run the script for my database class?
  
  Thank you.
  Vicki

  Hello

  Pre installed Apex XE is quite old and does not take in charge all new browsers.
  Did you try to use other browsers?

  You can also upgrade Apex
  http://www.Oracle.com/technetwork/developer-tools/Apex/upgrade-Apex-for-XE-154969.html

  But be aware that you lose the database management features. But you can make those for example with the SQL Developer as above shows link.

  Kind regards
  Jari

• I can't go to the article with a single button...

  Hi everyone, Im not passing to the Pentecost Article article a button for example, I have need move on to section 1 of article 10, with one button I can do? Thank you

  Yes, you can do, watch this video.

  http://helpx.Adobe.com/Digital-Publishing-Suite/Help/hyperlink-overlays.html#WS9293e1fb3b9 77c5c53fe9e2612b12c9933c-8000

• Running the vb from a HTML link code

  Hello
  
  I use place holders to show and hide the text tables. There are several tables on the page to hide (only 1 to be visible at the same time) and I got it working all fine using buttons asp to run the vb script but I want to show and hide the tables when clicking on a html text link rather than the button of the ASP. Can anyone help?
  
  The vb script:
  < SCRIPT language = "vb" runat = "server" >
  Void updated (Sender As Object, E As EventArgs)
  phdiscounted. Visible = true
  phVariable.visible = false
  End Sub
  
  Void Variable (Sender As Object, E As EventArgs)
  phdiscounted. Visible = false
  phVariable.visible = true
  End Sub
  < /script >
  

  Sean022 wrote:
  > Hi,.
  >
  > I use place holders to show and hide the text tables. There are several
  > tables page to show and hide (only 1 to be visible at the same time), I got
  > all work well using asp to run the vb script, but I want to show
  > and hide tables by clicking on a link rather than the ASP html text
  > button. Can anyone help?
  >
  > The vb script:
  >
  >
  >

  If your use keys then you must receive the data from the form using
  Request.Form("formname") right? If you want to use a link, you will need
  pass a variable in the url.

  For example:

  Show

  Then use on yourpage.asp Request.QueryString ("show") to get your variable.

  Steve

• HP Pavilion Notebook 15-n259tx: cannot change the brightness of the screen with f2 / f3 buttons

  Dear, HP Support,.

  I upgraded the os to my laptop HP Pavilion 15-n259tx windows 8.1(in-built) Windows 10 a few days ago. Win 10 works well. But yesterday, I noticed that there is no software for my graph RAEDON AMD (TM) HD 8670 M. card so I open the AMD website, find my graphics card software and install it. But at the end of installation, I noticed that the brightness of my screen become maximum. And I can't control it by the default keys f2 / f3. After that keys, no effect takes place. Today, I uninstalled this driver AMD RAEDON (TM). But still the problem persists. Help, please.

  Hi @Ananyo ,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 15-n259tx and problems with the brightness. You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a document that shows how update the drivers that do not work correctly with Windows 10.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that may need updating.

  I hope this helps.

  Thank you.

• How can I remove Windows Vista in reduced with no start button functionality?

  My older nephew of ten year and his friend decided to install his copy of friends of Windows Vista on my laptop, I don't know.  They used a Windows Anytime Upgrade disc.  He is now in reduced without a start button functionality mode.  He also says that he is not a genuine copy.  I tried to access internet explorer, but it continues to tell me that the pages do not respond and to wait or kill pages.  At this point, I would really just uninstall that copy of Vista.  I had Windows XP on the laptop, is it possible that I can return to the use of this?

  My older nephew of ten year and his friend decided to install his copy of friends of Windows Vista on my laptop, I don't know.  They used a Windows Anytime Upgrade disc.  He is now in reduced without a start button functionality mode.  He also says that he is not a genuine copy.  I tried to access internet explorer, but it continues to tell me that the pages do not respond and to wait or kill pages.  At this point, I would really just uninstall that copy of Vista.  I had Windows XP on the laptop, is it possible that I can return to the use of this?

  Yes, there is a way.

  System Restore will not do anything

  Contact the manufacturer of the laptop and getting them to send you the xp recovery disk to reinstall xp if you do not have a xp cd

  If you have not a cd of xp do a clean reinstall of xp

  Voila

  Walter, the time zone traveller

• How to run the script with parameters such as alarm action .ps1

  Hello

  I know not how to configure alarms, I know that I can point to monitor cluster for changes (via the GUI), but... I have different groups and I would like to set an alarm by vCenter which monitors cluster for changes. Let's call it "RefreshCapacityInfoOnExternalDB".

  So, lets just say. I would like to run my script whenever a virtual computer is added, Reconfigured or ESX host are removed, added in a Cluster. The alarm would launch the .ps1 script written in turn the ability to update external db cluster info.

  Shortly said: ability to cluster values are changed

  What I need is this: run the script-> CapacityInfoRefresher.ps1 < Cluster_name_where_ReconfigEventsTookPlace >

  I guess that, first I need an environment variable (if it exists) that can be used as a parameter for the < Cluster_name_where_ReconfigEventsTookPlace > placeholder script. Right?

  Chapter 16 of the book of LucD & Friends "PowerCli reference" mentions some environment vars but I'm stuck. Anyone using these options?

  THX

  A.S.

  You can set your alarm on the node above in your vCenter tree, this way it will be active for all collections in the vCenter.

  These alarm environment variables are automatically available for your alarm script when it is triggered.

  These environment variables, you will be able to determine to which cluster the alarm was pulled.

  So I don't think that you need to pass this information as a parameter to the script.

  Perrhaps you could share what exactly alarm you want to set and what looks like the script which should trigger alarm.

  And Yes, I use these environment variables in scripts of alarm

• Bug report: website does not display the flash with version 11.4 data

  A Web site, I have used for years is no longer present all the data with the new version of Flash Player. I see a "loading" spinning wheel instead, who never stops turning. Others using the site meet the same problem.

  I removed 11.4 and installed 10.3 and all is well again.

  __________________________________________________________

  Web site: gmws.edupage.org/timetable (the school calendar that I administer). A calendar should appear, and clicking on 'teacher', 'class', etc. should give a drop-down list of options. (Try less 10.3 and you will see the correct behavior).

  I discovered that I was using 14 Firefox; When I updated, it works fine.

  Sorry for the confusion.

• Run the bat with cfexecute

  Hello
  This is a newbie question, but I'm stuck. I have a .bat that works very well through the command prompt, but doesn't work with < cfexecute >, it seems simply to read the .bat but not run. The .bat reads as follows:
  
  Java - classpath ".;" C:\CFusionMX7\wwwroot\i-recall\javaClasses\GATE-3.1\bin\gate.jar' AnnieAPI
  
  "When I run < cfexecute name="C:\CFusionMX7\wwwroot\i-recall\javaClasses\GateClasspathRun.bat ' variable = "myVar" timeout = "100" >
  < / cfexecute >
  
  The output looks like this:
  C:\CFusionMX7\runtime\bin > java - classpath "C:\CFusionMX7\wwwroot\i-recall\javaClasses\GATE-3.1\bin\gate.jar" AnnieAPI
  
  Simply, he reads and does not run the AnnieAPI java command. I didn't write so maybe I need to add something to run this .bat file. Any help is appreciated.
  
  Kalen - G

  I thought about it. Even if the bat file and the java class are in the same folder, I did specify the location by adding the following lines at the beginning of the .bat file:

  EDI
  CD cfusionmx7/wwwroot/i-reminder/javaClasses

  Now it works perfectly. Thanks for all the help, I appreciate it.
  -Kalen