run the program comments-VM on the host

Similar Questions

• Run the host ESX 4.1 in vCenter 5.0

  Hello everyone, I have a simple question.   I am running 4.1 U1 ESX hosts and vCenter 4.1.  I need to upgrade to ESX 4.1 U2.   I know I need to improve my vCenter to match my version of ESX host, but I thought I killed a stone 2 strokes.   I have the license for vCenter and ESX 5.0 but I'm programmed to upgrade next year.   Given that I have to upgrade my vCenter anyway can I go to version 5.0 and run my ESX host on v 4.1 U1 without any loss of functionality?

  I would like to upgrade everything at once, but the company needs me to complete the test first upgrade of the host is not an option at this time.

  Thanks for your help with this.

  Hello

  You shouldn't lose any features with what you described.  Remember however that in one year, you will still need to patch vCenter to upgrade to the latest version 5.x.

  Thank you

  Jeff

• When I connect to Photoshop CC I still can't go to the program - I need to change the host file?

  When I connect to Photoshop CC I still can't go to the program - I need to change the host file?

  Please follow it mentioned below as follows:

  1 complete the process / Task Manager tasks in the same order, as mentioned below the Manager tasks. See, Open the Task Manager

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is hidden folder please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  3 reset the hosts - IP addresses redirected file may prevent you to complete the authorization process.

  • Run the host file fix in the cleaning CC tool.
  • Reset the file hosts manually.

  4 - CUT any security software installed with firewall system, also if your having any browser Add On installed for blocking advertising that turn off too.

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  5 - raise the cloud creative app and connect

  Let us know if that helps.

• Write problems block the memory of the host

  Hi all

  I work with a sbRIO 9639 and followed what I thought to be the recommended procedure to write in the block of memory to the host computer via (see diagram attached host and FPGA implementation). However the operation of the aforementioned code does not actually change the memory and what is available is rather just the previous values (which are persistent).

  However, I am able to write to block the memory directly from the vi FPGA (one) and get the results that I would wait if I then run the host after writing the correct values. In fact, I can now see these values from the host using the read/write Protocol.

  Does anyone have an idea on the cause of this problem? I followed the implementation to write and read from the memory in the examples, but have not found any success.

  I can't possibly comment code NIs because I don't know who wrote, why and for what purpose.

  You can write to the control whenever you want, but if you don't actually read it yet (mark) then you're never going to see the new values.

  Polling station should be avoided on the host programs, but it is not inevitable and normal on FPGA.

  Put the entire program within another loop, and then try again.

• Deploy and run the part of the project in real time RT

  I am developing a project, LabVIEW-RT, with a User Interface on the PC and evanescent code that runs on a PXI system.  I read a few posts discussing the possibility (or lack thereof) to start the RT of the project by program part.  Here's what I mean: my project has a first level VI on the host PC, call 'Host UI.vi', and a first level VI on the RT target, call it "target RT.vi".  There is the usual assortment of other features of the RT, such as flow, LAN and network Variables shared, etc.

  During development, I open the project, find the code RT target, select the target RT.vi and click Run.  I can do the same with the host UI.vi.  My code works (or not, depending on whether I have introduced new bugs).

  What I would like do is to run the host user interface and run the code to mimic an RT target selection in my project and perform a right-click.  I partly managed, but a small step escapes me.

  Can I programmatically deploy my RT code and make it pop a window front so I can click on the Start button.  I even managed to start running programmatically using VI server.  However, when I start it programmatically (rather than clicking Run), my shared network Variables are not available.

  I studied it a bit by using Distributed System Manager.  With her, I can 'see' my shared Variables of network on the target of the RT, but its status is offline.  I put online by clicking on the button 'Start process' in DSM, however, when I then try programmatically start my vi target RT using VI Server, Shared Ntwork variables goes Offline (accordint DSM).

  Question - is there a way to do a program equivalent to locate my network shared Variable in DSM and clicking on start processes?

  [I had a great idea while writing this post.]  I have noticed that if I deployed my VI and also expanded my network shared Variable, DSM has shown to be online, but the target RT start VI VI Server, the NSV went offline.  What happens if I have deployed it after from the remote?  Good idea, too bad that it didn't work...].

  All the best ideas?

  BS

  Well, I just did!  I wrote a demo project RT with the following characteristics: RT side consists of a single VI that affect False in a Boolean Variable (NSV) shared network, goes in a while loop until there is true, goes into an another wait loop to make it False, then ends.  The NSV is hosted in a library on the remote target.

  The host does the following:

  1. Determine the IP address of the target of the project.
  2. The first name of the VI RT to run, to return a reference to it.
  3. Use the reference to deploy the RT VI on the remote target.
  4. Use the IP address and the name of the RT VI for a VI Server reference.
  5. Use the reference to start the code that runs on the target of RT.
  6. Go in a loop looking at the NSV and wait for the status of the error not be 8BBB0006 (uninitialized NSV).
  7. With the value returned by the NSV (must be set to False, defined by the code of RT), deny it, set it and wait that it will change.
  8. Do this one more time to return the NSV to its original value (as defined by the code of RT).

  Before running the code, right-click on the target of RT in the project and turn on "disable AutoDeploy Variables.  J of Zach, an Applications Engineer of NOR, suggested that this step, which can be the key step in the resolution of this dilemma.

  To test this, I restarted my PC and the aim of RT.  Once both had restarted, I opened the project on the PC, and without interaction with the section the project somehow RT (including not not clicking 'Connect'), I ran the host code.  He started the remote code and was told that the round trip time for set and reset my NSV was about 29 msec.

  I intend to make a full text of this and submit the entire project, with documentation and all the screws under utility, I used, to community page OR.  I'll try to get this done this weekend...

  Bob Schor

• LabView RT versionconflict between the host and target

  Hello everyone,

  for my diploma, I work with a compact system in rio (cRIO-9074) with two I/O-modules. After some research, I created a small project which includes an fpga - and a host vi. I wanted to test my project, so I've compiled the fpga vi and you want to run the host-vi. But then I got an error that said that the versions of the software LabView real-time between the host PC and target (is the cRIO-controller meant?) are different.

  As a solution, I was told to check versions and reinstall the software Real Time using MAX. Now my problem is that I don't know where I can check the version and/or how I can solve the problem to get the project running.

  I added the errorwindow (in German) as an attachment.

  I hope you can help me.

  Better subject.

  Schu3

  MAX is measurement and Automation explore National Instruments.  Open, then expand "remote systems".  You should see your cRIO system.  Expand and you will see 'software' in the list.  Right-click on it and choose to install the software.  That will open a window that will allow you to select what software and what version to install on the cRIO.  Install the version of LabVIEW that matches the one that you use for development.

• Run the program to failure comments

  Hi all

  I perform a few tests with vCO 5.5 before putting it in the business environment.

  While I can run some workflows with success (create, clone virtual machines and things like that), I am strugling trying to run a program in a prompt.

  As a newbie, I always use vCO workflows out of the box (no changes made yet) so I do not know why the called workflow fails 'running program in comments...

  I use this config:

  user: test

  password: password1

  VM: vm - xp (invited under tension and selected through vCO GUI)

  interactive session: Yes

  program path: C:\windows\notepad.exe

  arguments: n/d

  Working directory: C:\windows

  environment: N/A

  I tried with different configurations, but always the same result and not useful logged errors...

  Can someone give me a hand?

  Thanks in advance

  Because of my ignorance, I installed the VIX (obsolete AFAIK) plugin to be able to interact with customers.

  After checking the server.log, I discovered that there are errors in trying to call the VIX plugin, then I uninstalled the plugin and everything works now.

  Thanks a lot for your help.

  Kind regards

• vCo question UAC "run the program in comments.

  Hi all

  I fight on a question to vCo 'Running the program as a Guest' workflow by default.

  In fact I use it to call some Powershell Scripts on a network share because WinRM is not enabled on my VMs.

  The question that I myself is scripts are intended to be run from a "privileged" powershell prompt (right-click-> run as administrator when the interractive mode), otherwise does not work.

  But by default when I start powershell call scripts using the "program in the operating system performance invited', apprently it does not use the"privileged"mode.

  I tried to call one using powershell: start-process - runAs verb - ArgumentList ".ps1 file path" but does not work.

  UAC is enabled, it is perhaps the issue (when you do start-process-verb runAs - ArgumentList "path to the .ps1 file" in an interactive session, I got warning of validation UAC popup).

  Does someone had the same problem about UAC / run the program in comments feed?

  Any idea how I could get rid of him?

  Thanks in advance.

  Best regards

  Shane

  Unfortunately UAC DO blocks calls to run as a Guest that require elevated privileges. I have not found a way past this other than having disabled UAC. This might be acceptable during the deployment of virtual machines in a secure area "landing" of the network, allowing many operations comments that will take place, as a final step, then go VM OR appropriate to apply the strategy group that forces the UAC and then move VM out of the landing zone to its permanent home on the network.

• When you run a single virtual machine on the host computer, is it ok to assign all the processors for comments

  I have a single guest Windows 7 Pro running on the host ESXi 5 U1.   It will always be in a 1-1 configuration (we needed server hardware, but with BONES desktop for purposes of licensing).  The host CPU is an E5603 (Quad - core 1.6 GHz).  I want the guest to have the maximum amount of possible processor cores, because a true multi-threaded application runs.  Because Windows 7 is limited to 4 cores, I disabled hyperthreading on the processor so that when I assigned 4 cores the VM, I get all 4, not the half because of hyperthreading.

  I am setting for claim processor between the host and the guest?  Should I only assign 3 carrots to the guest while it is still available for the host?

  With the requirement, it's guessing more than knowing what to configure. I think that with 2 Dual-Core configuration, I suggested above, you're on the save side.

  André

• Start the host program automatically starts the RT program

  Hey guys,.

  I'm in a test phase and wanted to ask if it is possible to start the RTW program automatically, when I start my host VI. I don't have any executable for the moment because I am in the test phase, but I only want to support on "the button execute on the host VI and start (RT and HOST) screws.

  Is that possible or do I have to press two buttons to run?

  Kind regards

  Slev1n

  As Crossrulz notes, LabVIEW RT is essentially to another computer, does not Windows but rather running a real-time operating system (if on PharLap an Intel processor, often a version of Linux on FPGA hardware, I think).  It has always been necessary for these targets of RT to be 'on' and 'something', of course.  In the early days of LabVIEW Real-time, they sat often slowed down and you would use VI server to download and launch your RT code on them.  With the advent of the LabVIEW project (much) better to manage the objectives of the RT as, OR goes to a slightly different model where, as Crossrulz points out, the RT Code is supposed to be downloaded to the target and configured to start automatically running when the target is powered.

  In development Mode, there are provisions to download ("Deploy") and start the target RT and (theoretically), it should be possible to do it programmatically.  I tried to do this, but it was noticeably awkward that I have "gave in" and (except when in development Mode) practical to develop recommended follow-up of OR deploy and defined as starting on the target of RT.

  The idea, of course, is that if you know that the target RT is running when you start the host, the target should wait for the host to send a signal saying ' Hi, Target, are you ready to start working with me? (the target, of course, answered "Sure, let's get started...") »).  How to set up the first handshakes, it is up to you.

  Note that this model assumes / requires that until the host stops, it informs the RT target that she came out, allowing target RT back to its State "in expectation of the host."  A really simple way to do this, of course, is for the host to tell the target to reboot, which in fact boost its Startup Code (which is the target RT program).

  Bob Schor

• Run a RT VI, which is recorded on the host programmatically

  What I want to do is simple.  I have a PC host VI and a RT VI which communicate with each other using a network stream.  I want to be able to tell by program the RT VI to run in my host VI, so that I can ensure that endpoints network flow are both set for the period.

  I know that the method for this is to create a distribution source for the RT VI, deploy it on RT target and then access the RT VI using VI server.  I did it and it works fine.  The only problem is that due to the nature of my project that the RT VI is constantly changed.  For this configuration, this means that I have to rebuild the source distribution and redeploy every time I make a change to the RT VI.  It's long and frustrating.

  I want to keep my RT VI on the host and do the equivalent by program after pressing the button "Run" (including the deployment).  I feel like there should be a way to do it using the same reference to open Application > open Reference VI > node invoke as I did on the server of VI, but maybe not.  Is it achievable?

  Hi riplakish.

  You should be able to do using something similar to the example shown here:

  Example of community: programmatically deploying a VI

• Need for other computers on the network to access my laptop computer to run a program

  I installed a program on my computer that acts as a service and I now need to install the application on other computers on our network.  Other computers need point to my computer in order to run the program.  Even if I set the program to point to my ip address, it fails.  Do I need to add a player shared or mapped on each computer to see my computer?  I am new to this and I would appricate all the assistance.

  Thank you.

  CAT

  You should check with the technical support of the mystery about its requirements for network program. Client/server different programs have different requirements. Certainly, you must assign your portable computer a static IP address. If the laptop is not always in the office or available, it is not really the choice the most suitable to host the game server a program. But presumably you know the better your situation and feel that the laptop will work. MS - MVP - Elephant Boy computers - don't panic!

• The host Windows process RundII32 message each time I run the Explorer

  Whenever I run the browser, I get a dialog box asking if I want to enable the host Windows RundII32 process to access my computer.  Why has this suddenly started happening?  Is how important it?

  Well, as your computer think rundll, that is used to run files .dll as programs, is a potential security threat, then Yes, something wrong, probably with your security settings.

  Maybe it's a bit of a leap, but you can run a virus scan, that you could have gotten a virus that messed with the settings.

  If you haven't already, a malware scanner good to get malwarebytes, www.malwarebytes.org (it is free)

• Help me REMOVE the duplicate folders My Documents and others created automatically when I install Virtual PC in XP Mode to run older programs. I removed the computer virtual and XP, but it does not remove the My Documents folders duplicate.

  While trying to run some older programs (Corel) in characteristic as advertised XP mode from my new Dell laptop and Windows 7 PC, I created Virtual PC and XP mode Setup.  Somewhere during this process, the system created in double My Documents, my pictures, my videos, files etc. that you can not (no authorization) access through Windows 7.  I understand that they may is accessible while you were in Virtual PC.   I came to my senses after the poor performance of Windows XP/Virtual PC and decided to remove remove these programs (and buy Corel for Win7).  I followed the instructions for a good dismantling of Microsoft who think in the end, these inaccessible files would disappear and I would have a struture of own file again.  However, duplicate inaccessible folders still remain and I can't get rid of them.  Believe me - it's a pain because it's very confusing when you browse folders.   There is no files in these folders, so there is nothing that we need to go.

  Please, for the love of peace in my family, tell me how I can get the PC back where it was when we first install Windows 7.   And - what's the problem of not having a complete control of my pc?  Personally, I'm offended that Microsoft has locked the users so that they cannot use their own brain - apparently I'm not the only one...  If you are willing to share, I would appreciate a detailed response.

  Hello, SuperMomNot

  Where are these records?

  Virtual PC will create only shortcuts to installed applications in XP mode, no records. The ability to open and save files that are stored on the host computer is made via the network sharing of files between the two.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Setup.pl running on the host with no existing data storage

  I have a new environment, I'll put up: Dell Vmware 5.0 guest (s) and a 10 Gb Equallogic SAN PS61xx

  I am the great Dell documentation and want to run setup.pl to configure my Vmware Vswitches, then install the DellMultipathing (MEM)

  I installed Vsphere CLI on my workstation to mgmt and you attempt to run this command:

  Setup.pl - installation - server = 172.19.0.203 - bundle = dell-eql-mem-esx5 - 1.2.0.365964.zip

  This operation fails because there is no data presented to the host still store

  I'm in the chicken and egg scenario, I need available storage to be able to connect to the storage!

  How to do this? running off a VMA device would be different? (I think VMA runnign out of my workstation management using VMware Workstation)

  Thank you

  Looks like you have currently not iSCSI installation program.  The option - install option assumes iSCSI is already running.   You simply install the software.

  In the user guide starting on page 7 is the use of setup.pl to configure iSCSI and then install MEM in addition to this.

  Setup.pl - configure - bestpractices - server = hostname [-username = username]

  [- password = password] - NIC = NIC1, NIC2,... - ips = IP1, IP2,...

  [- vswitch = vswitchname]  [- mtu = mtu]  [- vmkernel = vmkernel_prefix]

  [- netmask = masque_sous]  [- enableswiscsi]  [- nohwiscsi]  [- groupid = IP of the PS Group] [- vds]

  [- logfile = nom_fichier_journal]  [- heart rate = IP]  [- chapuser = username]

  [- chapsecret secret =]  [- vihost = vihostname]  [- viusername = viusername]

  Kind regards