Running on Solaris SPARC (11.1.1.3.0) application development

Similar Questions

• How P2V Solaris (SPARC) to the Virtual Machine VMware x 86?

  Good evening everyone,

  I would like to know is possible to convert a physical Solaris server is running on a Sparc, to a VMware VM on a processor a x 86 platform. Y of the tools out there that do exist and can accomplish this?

  Thank you

  Steve

  Oracle's Web site has a couple. I wrote an article great admin on how to create areas of high availability (the short name of containers) to http://www.sun.com/bigadmin/content/submitted/ha_containers_zfs.jsp. You can check out http://www.sun.com/software/solaris/containers/faqs.jsp which has links to a lot of Solaris container information including how servers solaris 8/9 p2v.

  One thing to note on this subject, is that if you create the flar on a SPARC box, you need to install the image on a SPARC box. (that is to say physical SPARC Solaris 8 needs to be installed on a SPARC Solaris 10 zones and Solaris 8 containers installed package server.) The containers are not cross platform compatible.

• Installation of Interaction Webcenter 10g in Solaris SPARC 32?

  Hello world:
  
  Im trying to install Interaction Webcenter 10 g on solaris SPARC 32 bit, but you are looking for the installation package in OTN http://edelivery.oracle.com/EPD/Search/get_form?results=1 that seems not supported for this excerpt... am I right?
  
  Only a version for aqualogic Interaction but I think that is not works for my development.
  
  I try to install a version of linux and everything went well but when I try to run the Setup Manager shell programming detects the data with the command uname s then the process "think" that it is on SunOS with 64-bit, of course, and it may not last.
  
  
  I appreciate any help on your part.
  
  And many thanks in advance.
  
  Published by: user11959610 on 19/02/2010 14:11

  Processor Sun Sparc, WCI requires 64-bit OS (32-bit only is not supported for Sparc):

  http://www.Oracle.com/technology/products/WebCenter/files/webcenter_interaction_10gr3_certification_matrix.xls

• Migration of the EBS of Linux for Solaris SPARC

  Hello

  We intend to migrate Oracle EBS 12.1.3 / 11.2.0.2.0 Linux for Solaris SPARC. and configure RAC and HA in the Solaris box.

  Please suggest this migration flow.

  Thank you

  Anil

  Hi Anil,

  Please see:

  R12.1.1: Oracle eBusiness Suite Installation and upgrade version Notes 12 (12.1.1) for Oracle Solaris on SPARC (64-bit) (Doc ID 761568.1)

  R11i / R12: Oracle eBusiness Suite upgrades and Platform Migration (Doc ID 1377213.1)

  Database

  Using Transportable Tablespaces for EBS Version 12.0 or 12.1 using Database 11 GR 2 (Doc ID 1311487.1)

  Process of 12.0 and 12.1 using 11 GR 1 material or 11 GR 2 import/export (Doc ID 741818.1)

  Application

  Migrating applications platform with Oracle E-Business Suite Release 12 (Doc ID 438086.1)

  Once you migrate the application/database, configure using the RAC:

  With the help of Oracle Real Application Clusters 11 g Release 2 with Oracle E-Business Suite Release 12 (Doc ID 823587.1)

  Thank you

  Hussein

• 10g on Solaris SPARC to 12 c on Solaris x 86

  Hi all

  Thanks in advance for reading my questions, I was stuck on this during some time now.

  I'mnew management database, so be lenient if this question has a straight answer.

  As the title, I want to migrate a database 10g on Solaris SPARC to a newly created database 12 c on Solaris x 86.

  What I read in the docs, I need to use:

  1 cross-platform Transportable Tablespace using expdp.

  2 convert the data file with RMAN (due to different endian)

  3. import the dump of the data and data file in the new database.

  The docs say I must re-create all user profiles in the target DB be same as source DB, otherwise impdb will throw an error. However I have a few hundred user patterns and recreate one by one is impractical.

  Is it possible to import the storage space while recreating all user profiles at the same time?

  Thank you very much

  Kevin

  Hey Kevin,

  I thought there was a reason you want to use the TTS on expdp/impdp (usually the size of the database would be the main reason here). expdp/impdp will extract everything you need - adding that the TTS is in your case, an unnecessary complication.

  Essentially made of what datapump is extracted a load of SQL statements in a file - i.e. create table, insert into table values 1,2,3 etc - so it is completely platform independent and can be used from any platform to any other platform. So in your case, it would create all the storage space in the tablespace x and then fill. Copies fair TTS the datafile (with data in them) then the oracle doesn't have to do all the create table/inserts he only adds metadata about those objects in the destination database data dictionary.

  I would ignore TTS and do the following steps:

  (1) in the new database create tablespace empty nine

  (2) complete expdp = y on source

  (3) no impdp full = y on the destination

  Probably still get you some errors on imports (mainly because of objects already existing system - but these can be ignored)

  There may be some grants sys lacking in complete export to perhaps be given manually afterwards (you have not one of these - here's how you can check out them http://dbaharrison.blogspot.co.uk/2013/05/script-to-create-grant-commands-for.html )

  Hope that helps,

  Rich

• JRE Oracle Solaris SPARC 64-bit question

  Operating system: Solaris sparc 10u9

  I recently upgraded to 1.7.0_45 java runtime environment and I have encountered a few problems.

  So far, the usual approach to get a 64-bit JRE was to replace the bin files / with the 64-bit package (given that the 64-bit package depends on the 32-bit one)
  But in trying to do the same thing with jre 1.7.0_45, problems began to occur.

  After further research, I noticed that the java executable has the runpath has changed and so it cannot find the necessary libjli.so

  (Before 1.7.0_45, the java executable contained 3 runpaths to cover all the test cases)

  Any suggestions on how to deal with the situation? Just to note, changing the JAVA_HOME is not an option because it is referenced more than a hundred times, so it would be rather impossible...

  Looking forward to any suggestions.

  I came to a pretty rough resolution, but it is the only work so far - symbolic links.

  The resolution is the following:

  (1) delete all files(not the sparcv9 directory) in bin /.
  (2) create symbolic links in bin / that link to the contents of bin/sparcv9 /.
  (3) be careful when extracting the jre - zip/copy different agents (such as ants, etc.) have different implementations of the respective functions. For best results, use the native tools of the OS (cp, unzip).

  PS: I write mainly for users who encounter the same problem. The question is still open, because there might be a better solution.

• Oracle 11.1.0.7 for Solaris Sparc 64-bit client

  Hi all
  
  Can you help me where I can download customer Oracle 11.1.0.7 for Solaris Sparc 64-bit.
  
  I tried google and OTN, but he's not here :(
  
  
  Thank you very much
  
  Kinz

  11.1.0.6 is older than 5 years - is not part of the 'family of newer version', which is 11 GR 2

  See page 4 here - http://www.oracle.com/us/support/library/lifetime-support-technology-069183.pdf

  HTH
  Srini

• No power supply in April 2012 to 10.2.0.4 on Oracle Solaris SPARC (64 bit)?

  According to + Patch Update and Critical Patch Update April 2012 Document availability [1406574.1 ID], it seems that there is no April 2012 PSU for Oracle Solaris on SPARC (64-bit). The final is of course one was released on July 2011. But when I click on Database 10.2.0.4.12 PSU Patch 12879933 next to the Oracle database home, a download option appears for this platform. The download button is grayed out and the hover-over flight wrote that I don't have permission to download this patch.
  
  My questions:
  
  (1) is this typical of a platform to appear on a POWER Pack download page, even if there is no such PSU? And if so, why?
  (2) is there or is there not an April 2012 PSU to 10.2.0.4 on Oracle Solaris SPARC (64 bit)?
  (3) If this power supply does not exist, is my only option to upgrade to Set 10.2.0.5 Patch, and then apply the April 2012 PSU for it?
  
  Thank you very much.
  
  Dana

  Dana N wrote:
  According to + Patch Update and Critical Patch Update April 2012 Document availability [1406574.1 ID], it seems that there is no April 2012 PSU for Oracle Solaris on SPARC (64-bit). The final is of course one was released on July 2011. But when I click on the Database 10.2.0.4.12 PSU 12879933 Patch next to the House of Oracle database, a download option appears for this platform. The download button is grayed out and the hover-over flight wrote that I don't have permission to download this patch.

  My questions:

  (1) is this typical of a platform to appear on a POWER Pack download page, even if there is no such PSU? And if so, why?

  N ° and this is not to say that there is not, that is to say that you have not permission to do. Since it is a patch for 10.2, you'll need a contract "extended support".

  (2) is there or is there not an April 2012 PSU to 10.2.0.4 on Oracle Solaris SPARC (64 bit)?
  (3) If this power supply does not exist, is my only option to upgrade to Set 10.2.0.5 Patch, and then apply the April 2012 PSU for it?

  Thank you very much.

  Dana

• Re: migrate our database of the ERP of Solaris Sparc 64 to Linux x86_

  Hello
  
  
  We migrate our database of the ERP of Solaris Sparc 64 to Linux x86_64.
  
  Please suggest a few docs.
  
  Kind regards.

  I assume you're on R12 since you want to migrate the crux of application layer for 64-bit Linux (which is certified for the node on R12 but not 11i application layer), so please refer to the documentation on this topic - Re: someone at-migration/upgrade R12.0.6 on Solaris to R12.1.3 on Linux?

  Thank you
  Hussein

• Migration Oracle 11 g of Sun Solaris sparc to Red had linux

  Dear Experts,
  
  Could you please share your experiences of migration Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - Production of Sun Solaris Sparc 64 - bit Red Hat linux 5.6. Any links, documentation, issues, notes would be very useful.
  
  Thank you.

  I think that the best way to achieve this is to perform a test using test databases/servers. This test will identify the problems and obstacles specific to your installation, which may or may not be mentioned in the generic documentation that you can find.

  HTH
  Srini

• From the WEST on Solaris SPARC

  Hello
  
  Our group has a duty to improve a component that connects to Oracle DB.
  The component is written in C++, so it should be WESTERN.
  The component is supposed to work on Solaris SPARC, x 86 and Linux.
  
  At first glance, the OCCI page does not seem to have a downloadable API library for Sparc
  Or any version of Solaris also. Is this correct?
  http://www.Oracle.com/technetwork/database/occidownloads-083553.html
  
  However, the instant client page does not seem to have downloadable for Solaris Sparc and x 86.
  But I don't know if that's what I should start with.
  I see that there are a few example OCCI programs I can use, but I have absolutely no idea how to compile and use them.
  
  Y at - it a page that explains how to start with SACCO on Sparc?
  
  Thank you
  -Amol

  The instant client download will probably contain libraries and header files you need to compile and link the OCCI applications. It must contain the header files, libraries and jar files for odbc, oci, occi, pro * C and other interfaces.

• You will need to upgrade the ASP to run on Windows server 2008 and IIS 7.0 application.

  I have an ASP application developed with Interdev 6.0; part of .NET and using the time to design Windows server 2000 controls.

  I need to upgrade the application to run on Windows server 2008 and IIS 7.0 ASP. I find some compatibility problems.

  The part that I'm stuck at the moment is the creation of objects in the runtime that gives an error.

  : "800a01ad" VBScript runtime error
  Component ActiveX cannot create object

  Code:

  Set OF = Server.CreateObject ("DERuntime.DERuntime")
  Application("de") = OF. Load (Server.MapPath ("overall. (ASA"),"_private/DataEnvironment/DataEnvironment.asa")

  The MSDERUN. DLL is properly registered on the server with the correct permissions.

  What are the possible solutions outside the upgrade of all of the ASP.net project. ?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows 10 first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.  I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error.  Has anyone seen this one?  My setup is below:

  

  Hi PK Gary,.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• Clone R12 on solaris SPARC 64-bit servers

  Hello
  I use the cold backup and try to first clone in these servers with fast clone. Version of the application is 12.1.3, 64-bit Solaris 10 servers.
  Listener.ora was correct value after quick clone.
  It still points to the source values and it does not target listener start. When I try to start listener, below error takes place. If I update file listener.ora manually and then it allows me to start the listener, but once I run autoconfig he sweeps my published changes. What model of script/make changes to the listener.ora file during quick clone?
  
  # lsnrctl start deve
  
  LSNRCTL for Solaris: Version 11.1.0.7.0 - Production on May 26, 2011 10:53:48
  
  Copyright (c) 1991, 2008, Oracle. All rights reserved.
  
  From /u01/oracle/deve/db/tech_st/11.1.0/bin/tnslsnr: Please wait...
  
  TNSLSNR for Solaris: 11.1.0.7.0 - Production Version
  System settings file is /u01/oracle/deve/db/tech_st/11.1.0/network/admin/deve_devebsdb/listener.ora
  Log messages written to /u01/oracle/deve/db/tech_st/11.1.0/log/diag/tnslsnr/devebsdb/deve/alert/log.xml
  AMT-01151: name missing listener, deve, listener. ORA
  
  Listening port could start. See the above error messages...
  
  Thank you.

  It still points to the source values and it does not target listener start. When I try to start listener, below error takes place. If I update file listener.ora manually and then it allows me to start the listener, but once I run autoconfig he sweeps my published changes. What model of script/make changes to the listener.ora file during quick clone?

  The context of database file - search for context variables for entries (mainly for the listener) that point to the source node/instance and modify to point to the target node/instance, and then run the automatic configuration.

  Thank you
  Hussein

• Error: The application cannot be run your security settings have blocked a self-signed application to run.

  I tried to save a certificate for digital signature on www.incometaxindiaefiling.gov.in.
  When the site was asked to run the applet Java JRE7, which I have allowed.
  But then the small window appears with the following message;

  Application blocked for security reasons
  Cannot run the Application.
  Name: StoreCertificate
  Location: http://incometaxindiaefiling.gov.in
  Reason: Your security settings have blocked a self-signed application to run

                  [  OK  ]       [   More Information...   ]
  

  Hello darshan_3101, this message is not firefox but the java plugin - please refer to the documentation of oracle on the topic: http://www.java.com/en/download/help/appsecuritydialogs.xml