Running two different monitors res - GPU requirements?

Ladies and gentlemen,

I will build a computer to work again-photo PS CS4 and asked in a previous thread on current graphics cards largely support the requirements of Photoshop. The answer was: the cards PCI - e current will do it. Now I realize that I want to run two monitors of the card I buy and all my research cannot come (here) with a response.

I have a Viewsonic 2030 monitor b good 21 "for graphic design professionals (OK, it's an LCD screen so I don't know there limits...) which runs natively in 1600 x 1200. I also have a gateway 24 "that runs in 1900 x 1200. I want to calibrate the Viewsonic, display images on that and book the bridge for pallets of tools and other applications, etc. It would be a bonus even greater if I could run only in the portrait, the front door as I often even now. Both will have to run from a DVI signal. VGA signal too 'soft '. So, I know that the graphics card must have two DVI-out connectors.

This ability would be worth extra cost on a low-end card. May be no big deal, absolutely assumed - and this is why it is not mentioned in the FAQ, knowledge and other databases. Although I went to nVidia, I would buy an ATI card equipped to achieve this functionality if it is what was needed. I also know that I will probably have to give up one of the slots with a bulky card. I think it will be OK, as there only seems to be a lot of requests on the slots these days with so much available through the-motherboard chipsets. (My generation was on a conservative Intel card to end 2003 - no sound - and the integrated LAN chip went soon afterwards to a bolt of lightning nearby...! No. IEEE 1294 to all and not enough USB, etc. etc.)

Thanks in advance for comments, everybody.

jonathan7007

again, any card should be well enough just make sure you get a card with either a DVI or DVI ports and a HDMI converter port + DVI.

Tags: Photoshop

Similar Questions

  • Pavillion 500 - c60: two different monitors as multiple monitors

    Is it possible to run a two-screen display using two completely different monitors? I'm replacing an antique desk with a 500 - c60 (Win 8.1) Pavilion and also buy a W2371d monitor for the new machine. The old PC use a perfectly good 17 inches Samsung screen, but the former.

    What will happen if I tried to include my old monitor in my new configuration? If I was able to use two monitors, I would of course make the new HP the primary one. Yet, it would be useful to me if I could have the additional area of the former monitor display. However, the screens are not only of different manufacturers - they are of different vintages, different sizes, different standard resolutions. It is even possible to do?

    Hello

    Yes, you can use TWO different monitors as indicated:

    • Chart AMD Radeon HD 8400 (in combination with the processor)

  • How can I run two different versions of Firefox, the last does not work with a site important I need to use?

    With the latest version of Firefox, I can't ' fast email ' to my students through the ANGEL of the College System. I had to uninstall and go to an earlier version. I prefer the new rev.

    A way to run two different versions. It doesn't have to be simultaneously. Seems to be a problem on the Mac and my XP systems.

    Thank you
    Kim

    You can install the portable version of Firefox 3.6.x to access Web sites that don't work with Firefox 5 +.

  • Can u run two different browsers both in ipad pro?

    is it possible to run two browsers both on windows divided into an ipad pro? If I want to use safari and firefox at the same time?

    Why? What advantage would be that you give?

  • HP LaserJet P1102w: Windows 8.1 - run two different USB connected P1102w printers with simple shortcut on the desktop?

    I am trying to set up a single laptop Windows 8.1 for someone who uses it according to the seasons in two locations (FL and MY). I installed a HP LaserJet P1102w printer in each location. I wish I had a printer that is connected USB (one at a time will be connected) able to access in an only menu icon Office or file print command.

    When you add the second printer, Windows8.1 recocognized, the driver is already installed, he apparently recognizes the different addresses MAC and/or numbers of series of different printers and present second printer on the page devices and printers in Control Panel or allow a second printer on the desktop icon.  The only way to tell apart printers is that one is listed as a Hewlett-Packard LaserJet P1102w and the other is listed as a HP LaserJet P1102w. It is rather confusing to the elderly person who will be using the laptop.

    Is it possible to have the mobile exploit any printer is connected both by means of a simple print command or icon? Maybe by connecting via a WSD Port Monitor?

    Thanks for any help or advice!

    Dave Waters

    Hey @dmwaters138,

    Welcome to the Forums of HP Support!

    I understand that you do not want to have two HP LaserJet Pro P1102w printer operation via USB Wired on 1 single machine with a single order of printing or the icon. I would like to help you with the configuration of this option today. Because there are two distinct Laserjet on Windows 8.1 computer printers, to do two icons impression for various devices. The best way to tell the difference between the two devices is to rename printers. Thus, when the client goes in file and print in the print dialog window, simply choose the printer name that corresponds with the device they want to print to. You can rename printers all you want. Install printers on the WSD Port wireless network would give the same result of having two copies of the printer is installed on the computer. One thing I see, is that the name of the HP Laserjet Printer is unusual. It seems that your printers may be using the built in Windows drivers, rather than the HP Full Feature driver package for the device. This may cause printing conflicts in the future. Can I please you follow the steps below to set up and install both LaserJet HP correctly.

    Step 1: Remove the drivers:

    It is crucial that your HP LaserJet are using the correct HP driver package. So I'll have you remove two copies of your HP Laserjet of the computer. Please make sure that the USB cables are connected.

    1. Open the screen, Start by selecting the Windows icon at the bottom left of the computer screen or by selecting the Windows key bottom left of the keyboard, to the right of the Ctrl key
    2. In the start screen, type devices and printers. Click on devices and printers
    3. In devices and Printers window please right click on the Hewlett-Packard Laserjet and select delete device or delete. Once this copy is a party, please right click on the HP Laserjet P1102w and select 'remove device' for this one as well. After have removed two copies of the Laserjet please close devices and printers.
    4. Then, on the Start screen type programs and features. Click on programs and features to launch the window
    5. Scroll the list of programs and find the HP Laserjet driver package. If you see the HP Laserjet printers select Uninstall. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, please close programs and features and continue to the next step.

    Step 2: Remove temporary files:

    1. Open the screen, Start by selecting the Windows icon at the bottom left of the computer screen or by selecting the Windows key bottom left of the keyboard, to the right of the Ctrl key
    2. In the start screen, type run. Click on Run to launch the run dialogue box
    3. In the run box, type %temp% , and then click OK
    4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
    5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
    6. Close the Temp folder when it is empty
    7. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

    Step 3: Install devices:

    1. Please leave unplugged USB cables

    2. Please click here to download the package full feature software and driver for the HP Laserjet Printer

    3. when the download is complete, please follow the instructions on the screen to install the first Laserjet. Make sure you select the 'install the printer software ' tab connect the USB cable only when the installation window prompts to.

    4. Once installation is complete for the first printer, please open the Start screen and type devices and printers.

    5. once the devices and printers opens, you will see the first copy you installed HP Laserjet. Please right click on the HP Laserjet Printer , and then select printer properties

    6. under printer properties , you will see the name of the printer on the general tab at the top. Please rename the printer to something that the customer acknowledges that this first printer. Then click on apply and then OK to save the changes.

    7. close devices and printers

    8 open the Start screen again. This time, type run. Click on Run to launch the run dialogue box.

    9. in the run box type %temp% , and then click OK. The Temp folder is now open

    10. in the Temp folder to locate the 7z... file. Click this folder to open it. This is the HP Installer package for HP Laserjet printers. Scroll to the bottom of this file and double left click on the P1100_P1560_P1600.exe driver package. The installation program will now open.

    11. in the title of the installation window, select "Add another printer. Don't connect not the USB at the moment. Click Next.

    12 connect the USB cable for the second printer once the installation window invites you to. After the second installation, please open the Start screen.

    13. in the start screen, type devices and printers. Click on devices and printers to open the window.

    14. in the printers and devices window, you will now see a second copy of your HP Laserjet. Right-click on the new copy and left click on properties of the printer. When the Properties window opens please rename the second copy of your printer. Click on apply then OK to save the changes.

    15. close devices and printers

    When the customer print, in the print dialog window they will just now to choose the name of the printer that fits the HP Laserjet Printer they wish to print to.

    I know that sounds like a lot of steps, but I wanted to give you as much detail as possible to ensure that this process goes well for you.

    Please let me know if the steps I have provided to resolve your problem. Good luck!

  • I need to run two different versions of Firefox

    I'm currently crashing problems with Firefox 26 on openSUSE 13.1.
    25 Firefox works perfectly well. There's two versions of openSUSE rest. I suspect an add-on.
    To debug this I need to run both, one to report the bug and make my day job and one to test the bug.
    I saw the other similar thread, but I'm not sure that the subject is the same.
    I downloaded the last FF since the mozilla site and copied the folder ~ / Documents.
    But when I run "~/documents/firefox/firefox--non-reculees - p", choose a new profile, I always get firefox 25, the installed version, not Firefox 26, donwloaded version.

    If I add the troubleshooting information, the message is refused (too long)

    wait, it's me.

    I force you use local firefox correctly

    Sorry
    JDD

  • Run two different Tunnels GRE on 1: questions

    Hi all

    I'm having a problem of implementation of two tunnels separated running on a sole Discretion; It's possible?

    Would appreciate you advice.

    I am able to ping in the tunnel (120) using the VRF, but as soon as I add 121 tunnel that originated (not using vrf) I can ping in the new tunnel 121 but cannot ping the original tunnel 120

    Context of the installation.

    R1 - Internet - R2

    R1

    !

    IPsec KEY vrf Internet cryptographic keys

    pre-shared key address 0.0.0.0 0.0.0.0 touches

    !

    crypto ISAKMP policy 1

    BA aes

    preshared authentication

    Group 2

    lifetime 28800

    !

    invalid-spi-recovery crypto ISAKMP

    Crypto isakmp ISAKMP profile profile

    door-key KEY IPsec

    identity function address 0.0.0.0 Internet

    !

    Crypto ipsec transform-set aes - esp esp-md5-hmac trans

    transport mode

    !

    Crypto ipsec IPSEC-profile

    86400 seconds, life of security association set

    Set transform-set trans

    PFS group2 Set

    Set isakmp ISAKMP profile

    !

    !

    interface Tunnel120

    VRF forwarding mgmt

    bandwidth 256

    IP 10.169.9.81 255.255.255.252

    IP mtu of 1376

    IP tcp adjust-mss 1360

    source of Loopback810 tunnel

    tunnel destination xxx.xxx.xxx.xxx

    tunnel vrf Internet

    Shared tunnel ipsec IPSEC-profile protection profile

    !

    R2 reflects this config, but as soon as I add tun 121 with the following configuration I get connectivity to the 121

    tunnel of 121 that I configured as follows:

    interface Tunnel121

    IP 10.190.12.249 255.255.255.252

    IP mtu of 1376

    IP tcp adjust-mss 1360

    source of Loopback810 tunnel

    tunnel destination xxx.xxx.xxx.xxx

    tunnel vrf Internet

    Shared tunnel ipsec IPSEC-profile protection profile

    !

    Please advice if I make mistakes?

    Also I would like to know if you need more information on this.

    Thanks in advance,

    No, I mean the following:

    interface Tunnel120

    key to tunnel 120

    interface Tunnel121

    121 tunnel key

    --
    Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
    http://www.Kiva.org/invitedBy/karsteni

  • BlackBerry Smartphones running two different BB Desktop software?

    Probably a silly question but I can?  I have the storm for the work and the curve for personal use, I use both on the same Desktop Manager?

    Thanks in advance.

    Perfect... Thank you.

  • Two different language versions of Firefox at the same time?

    I am running Windows 7 Home Premium. I have two accounts, one for me and one for my wife. She uses Firefox (Japanese), and I've been using another browser. But I would like to firstly using Firefox (in English).

    Is it possible to run two different language versions of Firefox on the same computer? I want to be able to run both at the same time... (So if I navigate and she wants to check an auction quickly it can without my duty close my browser).

    Can be done with relative ease?

    Make sure that each of you has their own Firefox profile folder.

    See:

    You can add - no.-distance to the command line to open another instance of Firefox with its own profile and run multiple instances of Firefox at the same time.

  • inability to perform two different accounts

    I can't run two different Skype accounts at the same time. Help, please. You can directly send the copy of your response to my email.

    You use this procedure?

    https://support.Skype.com/en/FAQ/FA829/how-can-i-run-two-Skype-accounts-on-the-same-computer

    What exactly happens when you start the account "secondary"?

  • How to run 2 different applications of the same Application Server

    Hello

    I would like to know how to run two different applications of the same Application Server with different databases?

    We use
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
    Oracle Application Server 10g 10.1.2.0.2

    Kind regards

    Hassan

    You can have as much as you want, just your applications should have different names or URLs and point to a specific database (using data sources).

    Greetings.

  • Two different tests running on separate monitors

    Can I run two executables different labview from a PC on separate monitors

    at the same time? I have a test installation of 2 station I would use 1 PC and 2 monitors with touchscreen for the RACC 2 operators simultaneously run different tests on each station.

    As long as you are careful not to use the same resources (files, hardware, etc.), you can have as executables running as you want.

  • Can I hurt my graphics card by running two monitors?

    I use a 15 Mid-2010 "MacBook Pro with a NVIDIA GeForce GT 330M 256 MB. I usually run two monitors from 15 "when I'm using photoshop or to CAD drafting, but I'm considering upgrading to a 27" of 2560 x 1440 monitor. Is there a risk of damage to my computer or the graphics card by doing this? I would like a larger screen to work, but he also takes my computer to last a little longer and can't hurt it. Thank you!

    N °

    Ciao.

  • HP EliteBook 8570w: is it possible to run two monitors on a 8570w without a docking station.

    Is it possible to run two monitors on a 8570w without a docking station. Connect a monitor to the VGA port and the other to display port.

    I was able to get this to work. My 8570w has an Amd over-pants 7700, don't know if that matters. One is connected VGA other Displayport. The port monitor must have a custom resolution defined in the over-pants Control Panel. except that it works perfectly. More laptop screen no. Docking Station 2 24 inch Dell.

    And thanks for the quick reply Provost.

  • View two different windows simultaneously with an internal and an external monitor

    Display two different windows on external and internal monitors at the same time?

    Yes, you can.

    When you connect an external monitor, its pixels are added to the screen integrated to create an extended desktop. If you get a double built-in, just disable fill video. The pane organize you allows to place each tiny in the same way screen icons, they are arranged on your bench, and then the mouse moves correctly on the boundary between displays, and you can drag and drop Windows where you want.

    .

Maybe you are looking for