RV120W / RV220W source please Cisco.
If you use Busybox binary in the firmware of your device, and if you (or the company you use) offers this feature for other (sale, give for free, etc.), you must provide users with the means to build the same binary source Busybox.
Cisco (or F1 Team) - where can I find the source while I am able to build firmware for the Cisco RV220W?
Archive LPG can be obtained by contacting the Small Business Support Center, which will increase the demand to level 2 support.
In fact, here's a better way:
http://www.Cisco.com/assets/Sol/SB/gpl_request_tool.html
Tags: Cisco Support
Similar Questions
-
source = [h323Id = "cisco"] IncomingCalls
Hello!
Help me please
I don't have the sip Server
the unit has global_IP
I have configured "sip off listenport".
but
'Cisco' Cal me
24 Oct 14:23:52.816 ppc appl [2786]: 163.82 h323_call_handler::handleH323CallInd(s=1) H323Call i: incoming call indication (rate = 64000 lang = "tlph = 1 source = ['cisco' ipv4 ' 202.57.32.35 =' = h323Id] dest = [ipv4 = e164 'MY_IP' =' '])
24 Oct 14:23:52.828 ppc appl [2786]: 163.83 IxCtrl i: iXController (0x49e00514) registerProtocolUser: proto 1, user = 0x49e0060c =
24 Oct 14:23:52.836 ppc appl [2786]: 163.84 LayoutUpdated (p = 1) MainEvents i: outputNo og 2 = 8 =
24 Oct 14:23:52.854 ppc appl [2786]: 163.86 I: MainEvents LayoutUpdated(p=1) outputNo og 2 = 8 =
24 Oct 14:23:52.856 ppc appl [2786]: MainEvents I: LayoutUpdated 163.86... frame [SelfviewPip] selfviewPip p = 1 src = 1 ig = 3 x = y 7487 = 7499 w = 2409 h = 2409 l = 1 b = 1 snapBorder stretch
24 Oct 14:23:52.866 ppc appl [2786]: 163.87 I: MainEvents IncomingCallInvite(p=2) remoteURI = "h323:cisco" displayName = "cisco" noisy = "h323:MY_IP."
24 Oct 14:23:52.882 ppc appl [2786]: 163.88 I: MediaStreamController SC::PlayReq(og=12) path='/sounds/nordic.mp4', toneType = file
I've seen these calls hit my E VCS lately, you're be scanned by someone looking to make free phone calls, don't think you're going to be able to much unless you upgrade your system behind a firewall and get rid of this public IP address.
Guess you could at least preserve the unit a bit by turning auto answer off or indeed keep your system off until you want to use.
/Jens
Please note the answers and score the questions as "answered" as appropriate.
-
Import will not default for each period, source-"Please select".
I am importing a folder on the local network (Windows), but I have to manually click in the Source Panel for the re - select every time I import.
I tried to save as a preset, but everytime I open the import dialog box, I am asked "Please select a source."
Any suggestions?
In the Hall on your left is the forum feature request.
-
"Could not complete because there is not enough opaque pixels source"-Please help
You must have a few pixels in the layer that you are trying to use the fill content on up-to-date. Your screenshot, it looks like the layer you have selected is completely transparent.
-
Runtime error insert in the data source, please help
Hello;
I do an application small security for a newspaper in function. I have everything works, but when I try to post to the DB and leave a field empty, it generates an error. I am placing my request code and then the 2 errors I get:
Query:
< cfquery datasource = "#APPLICATION.dataSource #" >
INSERT INTO Bliplist
(rejection, HTTP_USER_AGENT)
VALUES
(< cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.rejip #" >,)
< cfqueryparam cfsqltype = "cf_sql_longvarchar" value = "#form.browser #">) "
< / cfquery >
< cflocation url = "blist.cfm" >
Error:
Run database query error.
[Macromedia] [SequeLink JDBC Driver] [ODBC Socket] [Microsoft] [ODBC Microsoft Access driver] Field 'Bliplist.HTTP_USER_AGENT' cannot be a string of length zero.
The error occurred in C:\Websites\4npp8b\admin\trac\bl-action.cfm: line 28
26: (< cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.rejip #" >,)
27: <!-< cfif HTTP_USER_AGENT is true - > >
28: cfqueryparam cfsqltype = "cf_sql_longvarchar" value = "#form.browser #">) "
29: <!-< / cfif >->
30: < / cfquery >
--------------------------------------------------------------------------------
SQLSTATE HY000
SQL INSERT INTO Bliplist (rejection, HTTP_USER_AGENT) VALUES ((param 1), (param 2))
VENDORERRORCODE-3702
So I added the code to check if the field was true, and I get this error: (here's the cfif and error):
< cfif HTTP_USER_AGENT is true >
< cfqueryparam cfsqltype = "cf_sql_longvarchar" value = "#form.browser #">) "
< / cfif >
Error message:
Run database query error.
[Macromedia] [SequeLink JDBC Driver] [ODBC Socket] [Microsoft] [ODBC Microsoft Access driver] Syntax error in INSERT INTO statement.
The error occurred in C:\Websites\4npp8b\admin\trac\bl-action.cfm: line 28
26: (< cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.rejip #" >,)
27: < cfif HTTP_USER_AGENT is true >
28: cfqueryparam cfsqltype = "cf_sql_longvarchar" value = "#form.browser #">) "
29: < / cfif >
30: < / cfquery >
--------------------------------------------------------------------------------
SQLSTATE 42000
SQL INSERT INTO Bliplist (rejection, HTTP_USER_AGENT) VALUES ((param 1),)
VENDORERRORCODE-3502
What I am doing wrong and how to fix it? I have also a query on this update and that throws the same error is there, it's a blank form field, kind of lost here. How to allow length 0?
Thank you.
CFmonger
jdeline wrote:
> Under certain circumstances, HTTP_USER_AGENT will not exist. What you want to do is. This may not work. He has a little known gotcha with CGI variables.
IIRC do to their fickle nature, ColdFusion will always return true for
a test of IsDefined() for any value. -
Cisco ISE synchronization and NTP server
I am currently implementing Cisco ISE to our customer.
But having a little problem Cisco ISE cannot synchronize with NTP server.
Keep in mind, NTP servers in AD.
Currently, Cisco ISE synchronize just at the local level.
Cisco ISE implemented distributed mode, when there are two Cisco ISE installed on VMware (Administration & monitoring primary & secondary node), and another is the device (political Service node).
As a result of it might not sync server NTP and the ISE of Cisco, Cisco ISE often OUT-OF-SYN.
Is there a solution for this problem?
Gandhi,
This is a known issue, I have crossed upwards and have not read that you use AD as your NTP server, there have been problems with integration of the ISE and ACS with AD as their ntp source, please use another device like sources ntp, for example a router.
Thank you
Tarik Admani
* Please note the useful messages *. -
25xi Pavilion: Pavilion 25xi cannot find video sources! Help!
My monitor of 25xi Pavilion serves me for almost a year now, but rather all at once, a serious issue was raised.
I was helping a friend fix a few problems with his HP 2511 x, being understood that we had similar monitors, and I had exchanged with his computer monitors. My flag has acted very well on my friends computer, whereas he knew that his monitor is having problems. But when it came time to return my monitor on his computer that deserves it, it now seems to be stuck searching through video signals before settling on the mode finially 'sleep'. My monitor worked perfectly previously.
After some tests, I noticed that when it is plugged into HDMI and VGA, the monitor seems to linger to seconds about 2 or more before moving on. I could not reset to factory settings because the monitor needs to find a source before doing so. Although, I have reset the screen using my friend's computer.
My monitor had been not a single scratch since I bought it, and all ports appear to be functional, clean and intact. Strangely, no signal at all can seem to get to my monitor at the moment.
any help would be appreciated!
Hello @guerrjos18,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I read your post on how your monitor is not able to find video sources when you reconnect to your computer, and I'd be happy to help you in this case!
I provided you with a few steps, you can try below:
Step 1. Unplug the power cord at the back of the screen and the wall
Step 2. Press and hold the power button for at least a minute
Step 3. Plug the power cable in the monitor, and then to the wall outlet
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the factory reset option and select
Step 6. Try a different cable to connect your monitor to your computer
If the steps above did not resolve your issue, you can try the monitor on a computer or other device to see if the problem persists. If the monitor does not have still not all video sources, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
Thanks for posting on the HP Forums. Have a great day! -
Re: Slate 7 code the kernel source
I submitted the request, but no response from HP. What should I do?
andyjoecn,
We're sorry that we had some delays, but all requests for source code open source requested through the Open Source download Site have been answered, beginning June 18. If you do not have a link to open source, please return your application.
-
Cannot open twain source - canoscan Lide 500F
My scanner a CanoScan LIDE 500F, I can't analyze as it came with "unable to open twain source, please check the connection and restart the Toolbox. the connetion
so fine so how to open the twain source? I am using Windows 7 on my computer to.
Find out!
http://weblogs.ASP.NET/jeffwids/archive/2009/11/02/Canon-scanner-unable-to-open-TWAIN-source.aspx
-
Hi all
1: my Corp Office, I installed a K9 Cisco 1921, I want to know that how IPSec VPN Tunnel Cisco 1921 /k9 can support and what is the IPSec VPN throughput?
2: I have connected a link bandwidth (150 Mbit/s Download and 25 Mbit/s upload) to my Cisco 1921/K9, I want to know if Cisco 1921/K9 is able to manage bandwidth 150Mbps?
3: If one of my retail site runs on 10 Mbps of bandwidth on Cisco RV220W connect to Cisco 1921/K9 for the Corp. Office. How much bandwidth IPSec tunnel will use?
4: I have 200 points of sale and each have 5 computers, wifi and son (Mix few are on wifi and little are wired) that is block to install to the location of the retail of Cisco RV325 Cisco RV220W or 3.
Thank you
Sandy
For retail locations, I would watch the series 880 s. They are available with built-in ADSL/VDSL modems and also wireless. The WIFI network can be controlled by a WLC.
Management is the reason why I use RV-devices. As far as I know, they have still any IOS-like. The AP can be controlled with a WLC which also makes very easy to manage.
For the router to 4000, I know that what is stated in the data sheet and the part of the config guide of license (the last router Cisco 4000 I used performed a decade... ;-)).
But there are more feature-licenses like DRY/SSEC you need.
It seems that the performance is entirely controlled by the license and the 100 / 300 Mbps is the performance of the services. But without the HSEC license, you are limited (as for many cisco routers) to 85 Mbps encrypted 225 tunnels and bandwidth.
-
TMS directory system endpoints source folder
Hello
I came across a rather baffling problem with a few cases of TMS and I can't for the life in me know as to why this is happening.
I get the following.
in the option for creating source directory Cisco TMS, I create a new directory and link with the MSDS files and select the folder where all the end points, this creates the entries in the phone book for me as I expect with one exception, I will detail below.
H.323 = [email protected] / * /
H.323 = [email protected] / * /< this="" is="" where="" the="" issue="">
IP = IP address
I find that on some systems (this doesn't happen to all systems) in the second entry of H.323, the H.323 entry where I expect to see the directory (also known as E.164 number) number I see a URI where a field has been added at the end of the number, I'll give you a few examples below.
DN = 1234
set field = @video.net
random field = @newdomain.com
IP = 10.10.10.1
I expect to see the following.
H323 = [email protected] / * /
H323 = 1234
IP 10.10.10.1
but I don't actually see
H323 = [email protected] / * /
IP 10.10.10.1
I have purged the TMS systems and added, I searched through the xconfig for the NouveauDomaine which is invalid and I can't find anything anywhere other than on the list of areas configured SIP VCS parameters in the second area, endpoints have disabled by default SIP and in both cases I expect to see that under a SIP entry not an H.323 entry
This is the origin of the problem of when a user tries to call via the Directory site remote also responds to busy VCS is unable to find the appropriate directory number because the location request contains the domain as well as the DN.
I worked around this by adding a transform to the VCS who sees the patter of specific numbering and the bands of the area, so the calls work, but I still need to understand as to what is causing this behavior.
If I had to create the directory entries by importing information from the record of the VCS seem to be correct, its only when I try to import the entries of the endpoint via the system folder in TMS (or more exactly to import the information stored in the file on the endpoint system) I see the problem.
a very popular Adviser.
See you soon
Dave
Hello
Picked up that the case with David and it seemed that at least on the systems the international denomination on the mxp MXP has been configured. The area of intellectual property also has a configured domain uri that has caused the other symptoms. We where able to erase the questions but still yet to see if the client is actually affected by the same configuration "mistakes".
/ Magnus
Sent by Cisco Support technique iPhone App
-
How to validate the data in the source
Hi all
I am new to ODI, in my process could be called in 2 modes of Validation and load
a. validation - V - should perform validation on the data from the source according to the filter criteria
b. load - L - could make a mandatory check and load the data into the target table
My concern is how do only validation on data sources, please share any ideas on this...
Thanks in advance...Dragging data store in the package in order to apply the static control, you are doing your validation without loading.
This validation step will copy the invalid data in the table of errors (E$) and you can also decide if you want to remove from the source (and keep the data only in the error table). -
Error: Configuration of data source under planning
Once the successful configuration
(1) Foundation Services (Hyperion, SSP)
(2) Essbase administration services
(3) Server Essbase
(4) hyperion reporting and analysis
Schedule 5)-> options product, register with shared services, configure the database, deploy server applications (Appache), registration of the item Instance.
I stuck with the Configuration of data source under planning-
Steps in detail-
cheked on the configuration of the source data, and then click Next
Check create the data source, and then click Next
name of the data source: essdb (my choice)
DataSource Discription: essbase DB (my choice), click Next
Select my instance name: plan (in the menu drop-down) click Next
Select database: MS SQL server click Next
Type of database: SQL
Port: 1433 (default)
Information on the database:
Product: planning
database: p2DB (new DB, SQL)
user: p2user (new user, SQL)
password: *.
Click next
The Essbase server information:
Sever: my machine name (neeraj-pc)
user: planning (created the new user of essbase, external)
password: *.
Click next
Error:
at java.awt.Component.processMouseEvent (unknown Source)
at javax.swing.JComponent.processMouseEvent (unknown Source)
at java.awt.Component.processEvent (unknown Source)
at java.awt.Container.processEvent (unknown Source)
at java.awt.Component.dispatchEventImpl (unknown Source)
at java.awt.Container.dispatchEventImpl (unknown Source)
at java.awt.Component.dispatchEvent (unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent (unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent (unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent (unknown Source)
at java.awt.Container.dispatchEventImpl (unknown Source)
at java.awt.Window.dispatchEventImpl (unknown Source)
at java.awt.Component.dispatchEvent (unknown Source)
at java.awt.EventQueue.dispatchEvent (unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy (unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy (unknown Source)
at java.awt.EventDispatchThread.pumpEvents (unknown Source)
at java.awt.EventDispatchThread.pumpEvents (unknown Source)
at java.awt.EventDispatchThread.run (unknown Source)
Please suggest measures for centering properlyHello
The problem is that it does not resolve the name of your machine, now I don't know if it's down to a problem of vista.
Just out of curiosity you have anything in your hosts file, \Windows\System32\Drivers\etc\hostsIf you try to create the data source with 127.0.0.1 work?
See you soon
John
http://John-Goodwin.blogspot.com/ -
modem router VPN hardware firewall - config possible?
We have 2 remote employees having difficulties with their VPN client software turn off/on. We were preparing to spread the VoIP phones up to them and won't open our internal PBX network. I would like to make 1 stone 2 strokes by providing a hardware VPN to each employee to establish a gateway 2 IP Sec VPN gateway between their home and the main office. This should provide a more reliable connection and throughput high, all allowing the VoIP phone to connect through the VPN tunnel, thus keeping our secure internal PBX. So far so good. From what I can tell the rv120w, rv220w or cisco asa 5505 would do the trick. Now the difficulty - I don't want any personal traffic (Netflix streaming, whatever) from home, traveling through the VPN tunnel. So I would like to allow the employee maintain their own network staff, and within the personal network the hardware VPN device providing a secondary network would use the VPN tunnel.
It would look like this:
Web:
wireless router: (dynamic public IP 192.168.1.x private subnet)
personal computer
laptop
television network, etc.
hardware VPN device: (192.168.1.1 IP WAN, private subnet 192.168.2.x), IPSec VPN tunnel to the main office (must use internal DNS main office)
Phone VoIP (192.168.2.1)
Desktop computer (192.168.2.2)
Seems simple to me, but concerned about through two NAT. Looks like this would be preferred for a desktop home configuration that shares a single internet connection. Found an old Cisco product that was aligned to this specific scenario - the Cisco VPN 3002; but it is the end of life.
I'm also a bit wary of different routers Cisco RV line poor consumer reviews. Whereas the Zyxel Zywall USG 20 as an alternative.
The split of RV120 and RV220W site-to-site VPN tunnel support, so all traffic "cluttered" would remain local for home networks while the VPN traffic that's exactly right.
You can consider installing one of the routers listed above in areas home to avoid the double-NAT or additional purchases. The VPN device does not practice given that the expense of a gateway to gateway VPN router is fairly inexpensive.
-Tom
-
ISE Migration tool: Unable to connect to the ACS
Hello
I try starting the Cisco migration tool to migrate data to ACS 5.2 to ISE 1.1.
When I run the migration.bat file, I get:
C:\migTool>migration.bat
log4j: WARN no such property [encoding] in com.cisco.acs.positron.migration.utils.Log4jTextAreaAppender.
INFO [main] MigrationApplicationDriver.main:56: applies from the main method.
Org.springframework.context.support.ClassPathXmlApplicat updating of INFORMATION [hand][email protected] / * /: start date [Thu Jul 11 16:46:09 CEST 2013]; root of context hierarchy
INFO [hand] loading XML bean definitions of resource path of class [conf/META-INF/beans.xml]
INFO [hand] instancing of the singletons in org.springframework.beans.factory.s[email protected] / * /: defining beans [exportAuthorizationProfileCache, exportConditionRightOperandCache, exportDevicesCache, exportEnumAttributeIdCache, exportEnumerationCache, exportGenericAttributesCache, exportIdentityAttr
ibuteCache, exportIdentityDictionaryCache, exportIdentitySourceCache, exportPredefinedDataCache, exportRADIUSDictionaryCache, exportServicesCache, exportManagerImpl, m
igrationApplicationManager, migrationPhaseStatefulComponent, stateManager, migrationProcedureModel, migrationApplicationGUI, defaultImportObjectHandlerFactory, import
AllowedProtocolCaching, importAuthZProfileCaching, importDateTimeCaching, importDevicesCaching, importEndPointCaching, importExternalIdentityStoresCache, importIdenti
tySourcesCaching, importPolicyElementsCache, importRadiusProxyCaching, importUsersCaching, importManagerImp, org.springframework.context.annotation.internalConfigura
tionAnnotationProcessor, org.springframework.context.annotation.internalAutowiredAnnotationProcessor, org.springframework.context.annotation.internalRequiredAnnot
ationProcessor, org.springframework.context.annotation.internalCommonAnnotationProcessor]; root of the hierarchy of the factory
[Main] INFO start parsing of the XML query...
[Main] INFO start the process XML analysis...
INFO [Thread-5] Start ACS5 IP connection
WARN [Thread-5] could not find the required classes (javax.activation.DataHandler and javax.mail.internet.MimeMultipart). Attachment support is disabled.
ERROR [Thread-5] error occurred during communication with ACS 5.x. (404) not found
ERROR [Thread-5] error occurred during communication with ACS 5.x. (404) not found
ERROR [Thread-5] failed to connect to the DCC 5 to start exporting. Make sure that:1 migration interface is enabled on the ACS 5 server.
2 ACS 5 services run.
3 ACS 5 IP and username and password are correct.
4 ACS 5 has a compatible license installed.
INFO [Thread-6] Start ACS5 IP connection
ERROR [Thread-6] error occurred during communication with ACS 5.x. (404) not found
ERROR [Thread-6] error occurred during communication with ACS 5.x. (404) not found
ERROR [Thread-6] failed to connect to the DCC 5 to start exporting. Make sure that:1 migration interface is enabled on the ACS 5 server.
2 ACS 5 services run.
3 ACS 5 IP and username and password are correct.
4 ACS 5 has a compatible license installed.Then, I click on the export of ACS, and when I put my name to the ACS server and the password, I get:
"
ERROR [Thread-9] failed to connect to the DCC 5 to start exporting. Please ensure that: INFO [Thread-9] Start ACS5 IP connection
ERROR [Thread-9] error occurred during communication with ACS 5.x. (404) not found
ERROR [Thread-9] error occurred during communication with ACS 5.x. (404) not found
ERROR [Thread-9] failed to connect to the DCC 5 to start exporting. Make sure that:1 migration interface is enabled on the server ACS5
2 ACS 5 services run
3 ACS 5 IP and username and password are correct
4 ACS 5 has a compatible license installed.
Can someone help me?
Best regards
David
You have activated the web interface of migration? Check that you have configured the computer source of Cisco Secure ACS 5.1/5.2 with a unique IP address. The migration tool may fail during the migration if each interface has multiple IP address aliases.
Document taken in charge:
http://www.Cisco.com/en/us/docs/security/ISE/1.0.4/migration_guide/ise10_mig_install.html
~ BR
Jatin kone* Does the rate of useful messages *.
Maybe you are looking for
-
3110CT - XP driver needed sound
Do you know where I can find the driver of his work (under win XP) fo this laptop.Concerning
-
USB-5133 appearing does not in MAX, "loader" shows driver in Device Manager.
I have a USB-5133 can I use it on several computers. I'm putting it on another PC (XP Pro). The device is recognized by windows and it goes to install the drivers. When it's done, in the Device Manager-> data acquisition devices, I see "NI USB-5133 L
-
I have a laptop died and I want to switch from Win 7 to the other.
-
To uninstall programs that are loaded at startup
I received a notification that there is an update for Adobe. I gave him. About 20 unwanted programs have been downloaded. I uninstalled a lot of them. Some would not treat because the program was open. An example is Crossbrowse. I can't find ho