S110 does not see the window of the camera via radio (OSX) on MacBook Air 10.7.5, HELP!
I have a Canon S110, 1.0.2.0 firmware and can not get the camera to connect to my Mac OSX 10.7.5. I installed CameraWindow via the canon website and have 8.10.2 but it still not connect. I can't use the CD that accompanies my Mac without a CD/DVD drive. Help, please!
Problem solved. I followed a detachment ELPH where someone had the same problem which had a link to CameraWindow 8.10.2b download. I downloaded this and now it works fine.
Canon, you must update your Web site and compatibility.
Tags: Canon Camera
Similar Questions
-
S110 does not see the window of the camera wireless (OSX)
I have a Canon S110, OSX 10.8.5 (mountain lion) as well as OSX 10.9.1 Mavericks (two different computers).
I don't have the active OSX Firewall or other security software.
I connect my computer to the wireless network and then connect the camera to the same network. The two connect very well. The camera how never never find Camera Window. I tried to manually open the camera window, but it immediately says "no camera found".
I tried Camera Window 8.9.1 (because that's what literature Canon says is validated against 10.9), and I also tried the 8.10.1.15 version. Camera works fine with the Smartphone (iphone) connected to the same network using IOS Camera Window.
I have attached the camera first via the USB port on each computer to do the initial installation and synchronize the SSL certificate. The camera's firmware version 1.0.2.0 which is the last.
So with two versions of the camera window and two versions of Mac OS x, I can't see my camera more wireless.
Can someone direct me to what can go wrong?
Thank you
Brian
Did you install Camera Window from the CD or the Web site?
If the CD go to Canon Utilities CameraWindow Applications, wireless and then run WirelessCameraService and then try again see if the computer is detected.
-
Photo Downloader does not see the camera
After making sure my computer and software are all updated, I still see < none detected > when I use the Photo Downloader to download photos from my camera (canonT3i) and the iphone 6. I also tried re-opening bridge in holding down the 'option' key to reset the settings.
any suggestions? I use el capitan - thank you
Hi a bit stained,
We are aware of this problem and you try request of workaround mentioned below.
Open Bridge CC 2015, click file > device and import your images of the iphone device.
Additionally, make sure that you change the mode of the PTP/MTP device in USB mode to mass storage mode and then connect the device to your computer.
Please refer to the article for more information.
Adobe Bridge does not recognize some devices on Mac OS 10.11
Kind regards
Gerard
-
Windows 8 does not see the hard drive on the Satellite A200
Windows 8 does not see the hard drive on the A200.
How to install it?S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
The HARD drive is visible in the BIOS?Do you use the original disc from Microsoft of Windows 8?
-
Device drivers for a Win 7 install on Ubuntu system
Hello
I bought a Toshiba Portege M400-S5032 tablet PC reburbished that came with Ubuntu installed. I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen 'Select the driver to install' with no option. Because it is not find Windows device drivers, I went to the Toshiba site to see if I could download a full game, but I can not... So, how do you get drivers for Windows can install (or y at - it another way to work around it)?
Thank you!
The bios on fail safe defaults options are?
It will probably take the raid driver
-
Original title: Signature Collision?
I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.
Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision
Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).
I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.
Can anyone help?
Thank you
Comatose13Hello Comatose13,
There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.
http://support.Microsoft.com/kb/330140
Bobby
-
I bought a new pc to replace my old hp 14 months as the motherboard fried in. I bought a case of disk external hard to rocketfish to put the hard drive of my Windows 7 pc in. burned does not see the hard drive. my old pc with xp can access all the items on the external hard drive.
Check that the drive appears in Device Manager.
If so, go to disk management and assign a drive letter.
-
system does not see the hard drives as P6000 Windows 7 Pro 64-bit
PC is a little more than a year. About 2 months after installation disk c crashed. Replaced HP drive.
Customer said that she had problems starting and kept restarting. He ran chkdsk and hooked up to 36%
Now the system does not see the drive, but he sees no RAM, etc.
Anyone know what causes this?
Can what information I give to help troubleshooting?
Thank you!
Hello:
Try resetting the CMOS.
If this does not work, I would say that the drive controller in the motherboard is dead.
Clearing CMOS -
Portege A600-138 with Vista 32 bit does not see the computers in the Group Win XP network
Hello
My Toshiba Portege A600-138 with Vista Business 32 does not see the computers in the workgroup.
In our office, the computers are all equipped with Windows XP.When I connect my laptop to the Local network, I don't see any neighboring computers in Network Explorer.
I spent 1 hour and 40 minutes to talk to a specialist Service of Support from Microsoft, and the only way to have access to local machines, we found it had to enter the IP of the computer directly into the computer browser path field.I hope you understand what I mean.
The man said that he had no this problem with non - OEM Windows Vista versions.
He meant that the problem was with the oem versions of Vista preinstalled on laptops only.
He said that probably the sellers - in my particular case Toshiba - supplied their notebooks with VIsta oem images that were somehow corrupt.Does anyone have an idea of the cause of this problem?
> The man said that he had no this problem with non - OEM Windows Vista versions.
> It meant that the problem was with the oem versions of Vista preinstalled on laptops only.That's nonsense for me
The Vista OS preinstalled Toshiba which is same BONE as full Vista disc from Microsoft.
There is only one difference; Toshiba laptops are preinstalled with Toshiba and pilots tools and drivers and tools are part of the Toshiba recovery image that contains Vista, driver and toolsCheck this box:
http://www.Computerworld.com/s/article/9019179/Teach_XP_and_Vista_to_play_nice_on_networks?taxono myId = 16 & pageNumber = 1You will find information that a problem has to do with the new Windows Vista network map.
Windows Vista uses a new Protocol (Link Layer Topology Discovery).
LLTD is integrated with Windows Vista, this is why they appear correctly in the network map.
But the problem is that LLTD is not integrated with Windows XP, which is why they do not appear correctly.But you can fix the problem by downloading and installing the layer topology discovery responder.
Install it and your PC Windows XP will appear on the network map. -
all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?
If I shut down the computer and plug... he sees the thing then turned back...I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.any thoughts?Hi KK Waddell.
Thanks for posting in the Microsoft Community.
I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.
Before you start the troubleshooting steps, I need the information required.
1 did you changes to the computer?
2 did you receive an error message?
I suggest you to check with the other USB port.
I suggest you to see the links and check.
USB port may stop working after you remove or insert a USB device
http://support.Microsoft.com/kb/817900
Advanced troubleshooting tips for General USB for Windows XP problems
http://support.Microsoft.com/kb/310575
One or more USB devices may not work when you start your Windows XP-based computer
http://support.Microsoft.com/?kbid=885624
See also:
Hardware devices do not work or are not detected in Windows
-
Have a lenovo t60 disk opportunity was wiped out when trying to install XP Pro, I get message windows does not see the hard drive, but he sees the laptop.
If its SATA you need SATA drivers to install. Since the XP CD doesn't have the SATA drivers on it
Unless you disable the AHCI in the BIOS. Or their wake.
Or get the SATA drivers. Check out them on diskette, press F6 during installation and then add them.
-
laptop does not see the disk of works 9
I have works 9 and I want to install it on my HP laptop with windows vista home premium as a the opp system.
My laptop does not see the cd or one of its files... The packaging says it's compatible with windows vista.
It works on my desktop which has windows xp system opp on him.http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads
For any problems with your computer, not reading CD, ask in the Forum Vista Hardware at the above address.
See you soon. Mick Murphy - Microsoft partner
-
Version 38.0.1 does not see the passwords stored in previous versions
Version 38.0.1 does not see the previously saved passwords, and urged it to re - enter and save the password. After revert you to the version saved 31.7.0 pass back too. We have more than hundreds of copies of the program and all cached passwords, users do not even know what their password. This failure is a serious problem.
Problem solved. Probably the file has been corrupted signons3.txt. I deleted the file, and the new passwords are kept. After this version of the software update and new version I've seen passwords, create a logins.json file and now everything is fine. On all other computers in the company such a problem does not arise.
-
Connected to but the Airport utility does not see the time capsules
Hi, I have several time capsules.
I can connect to the web, but the airport utility does not see the time capsules. I tried to restart the time capsules, router, computer, but I still don't see any of the devices on the network.
What now?
Have you tried the airport utility in the iOS version... Download on the App or iTunes store and load... Works better than the Mac version.
Other than what Mac running what OS do you use?
This modem you have and how is the installation of TC on the network.
-
I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you
Can she be seen by disk utility (and which version of Mac OS X is)
Maybe you are looking for
-
How can I know if the download of my rental?
I tried to order a rental movie in ITunes. I don't see a hint showing that it is downloading. How can I tell?
-
9.5.1 iPhoto not working with iPhone 9.3.1?
I finally had the courage to update my iPhone 4s to iOS 9.3.1 (of 9.1.something) last week, and now it seems that iPhoto 9.5.1 wants to recognize to retrieve pictures of her. I have a 2012 MacBook Pro running OS 10.9.5 and everything worked without a
-
developer wants to pay me for a good review
I gave a bad review to an application. The Director contacted me and said that he would give me $10 to remove and write a good review
-
I can't change the spacing between the icons on my desktop. I use the classic style of windows and have my 110 DPI value display font. The icon size is equal to 28, and they are aligned on the grid. Is there a setting to the default size of the grid
-
Windows Installer has stopped working.
Whenever I try to install anything I get this: "Windows Installer has stopped working". Problem started yesterday or today. Don't know if this has nothing to do with what's going on, but the computer had a blue screen when running a scan with Norton