S1800-214 fails bootsequence
I myself bought a s1800-214 for parts. The problem is that it hangs at the openingscreen where the logo toshiba by pressing F12 to choose startdevice appears.
I installed a successful new bios, but it did not work.
You can see the post to begin the checks, the only thing that doesn't seem to answer is the fan, all other elements, diskette, cd, hard drive, and keybord are checked.
When you install a new bios, but the fan is operating normally.
Can someone give me a hint to solve this problem.
Thank you
Rob
Hello
Looks like something in the boot sector was damaged. If you can not even start in safe mode, I think that your only chance is to recover the system. And if that also does not work, then it seems that there is a hardware failure.
Good bye
Tags: Toshiba
Similar Questions
-
Problem of overflow on Toshiba s1800-214
I am trying to install windows 98 on a Toshiba s1800-214 laptop.
I insert the windows 95 startup disk, partition and formatting the hard drive is going well.
Then I insert windows 98 CD-ROM to install it. After initial analysis of the disc, I get an error message that blocks the system:
system error: overflowThank you
Hello
It is the mystery!
Check if any "additional" hardware was built in like RAM, PCMCIA cards. Please connect try it before you start to install the operating system. The computer may need a BIOS upgrade. Check the version of the BIOS and if you can find a real on Toshiba page do a BIOS update.
Campino Bye
-
Remove partition Bootcamp failed
Hey, I tried to remove my windows via bootcamp partition, but it failed in the process. Now this partition seems to be lost. I tried to reboot into recovery mode and see if the partition appears in disk utilities - but it's not... Does anyone have an idea how to find it and add it to my os x partition?
diskutil list
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 251,0 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_CoreStorage Macintosh HD 214.4 GB disk0s2
3: disk0s3 Apple_Boot Recovery 650.0 MB HD
/ dev/disk1 (internal, virtual):
#: NAME SIZE TYPE IDENTIFIER
0: Apple_HFS Macintosh HD GB + 214,0 disk1
Logical volume on disk0s2
0A7898A0-C449-4FDA-84EB-BF87D0A7692B
Unlocked encrypted
Cs diskutil list
CoreStorage groups of logical volumes (1 found)
|
+ Logical Volume - Group 29C3E7B1-1279-479E-8719-A33535D4C033
=========================================================
Name: Macintosh HD
Status: online
Dimensions: 214361235456 B (214,4 GB)
Free space: 8970240 B (9.0 MB)
|
+-Physical volume 123BAA17-BB24-40C9-96C9-87CFC2610174
| ----------------------------------------------------
| Index: 0
| Disc: disk0s2
| Status: online
| Dimensions: 214361235456 B (214,4 GB)
|
+--> Logical volume family 23CD0BAB-DE8E-447C-91DC-C1B56841CD86
----------------------------------------------------------
Type of encryption: AES - XTS
Encryption status: unlocked
The conversion status: complete
High level queries: secure
| Password required
| Accepts new users
| A visible users
| At the Volume key
|
+--> Logical volume 0A7898A0-C449-4FDA-84EB-BF87D0A7692B
---------------------------------------------------
Disc: disk1
Status: online
Size (Total): 213999943680 B (214.0 GB)
Reversible: Yes (unlock and decryption required)
Name: Macintosh HD
Volume name: Macintosh HD
Content indicator: Apple_HFS
TPG - r sudo show/dev/disk0
Password:
start index size summary
0 1 PMBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 418674288 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC
419083928 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
420353464 69881255
490234719 32 table dry GPT
490234751 1 dry GPT header
The easiest method is a Time Machine backup/delete/restore as described in Re: doesn't have windows via bootcamp 8.1 installation .
If you want to try to use the commands from the Terminal, let me know.
-
Satellite 3000-214: motherboard / pilot
My card mother S3000-214 (PIII 933) failed. I replaced it with an S3000 -? PIII 900. I ran to the S3000-214 toshiba recovery disks (the only ones I have). To start windows, I now get an error message "Stop 0000007 b. The microsoft site indicates a driver problem - probably the hard drive. Anyone know where I can get records of recovery for the S3000 PIII 900 Board or drivers for it?
Thanks in advance for any help.
Emma.
Hello
First of all, the Toshiba recovery image has been designed and tested for each series laptop and you can use this image of recovery only on this unit.
If you have changed the motherboard the derivers preinstalled on the restore CD will not work because it was not designed and tested for you new motherboard.Well, usually you can order the CD from recovery with the Toshiba service partner. But I guess you can order only the restore cd that came with your laptop.
I recommend you to install the Windows from the original CD of Microsoft operating system and the download page of all necessary drivers will be end on the Toshiba driver
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jspPlease note: you must install the Toshiba stuff in the right order.
Chipset utility, common modules, graphics driver, etc... -
Phase DMVPN I fail when migration of PSK to GIPR
I'm currently is the migration process of my network key preshared certificate DMVPN. Most of the rays have developed and works without any problem, but there are several that are not past the phase I. I have included the isakmp debug of the hub and one of the rays who fail. I see that the hub goes QM_IDLE after receiving the certificate of the talks, but it looks like not to speak it never receives the cert of the hub. I suspect a problem with the ISP, but it's not as simple as filtering 500 as seem to do all messages except the cert. If I bring him talking on PSK it works fine. Has anyone seen this problem before and what is the resolution?
DMVPN Hub
7 Oct 19:38:36.213: ISAKMP: 500 local port, remote port 500
7 Oct 19:38:36.213: ISAKMP: find a dup her to the tree during the isadb_insert his 7F1AA7CC5920 = call BVA
7 Oct 19:38:36.213: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
7 Oct 19:38:36.213: ISAKMP: (0): former State = new State IKE_READY = IKE_R_MM1
7 October 19:38:36.214: ISAKMP: (0): treatment ITS payload. Message ID = 0
7 October 19:38:36.214: ISAKMP: (0): load useful vendor id of treatment
7 October 19:38:36.214: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
7 Oct 19:38:36.214: ISAKMP (0): provider ID is NAT - T RFC 3947
7 October 19:38:36.214: ISAKMP: (0): load useful vendor id of treatment
7 October 19:38:36.214: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 245
7 Oct 19:38:36.214: ISAKMP (0): provider ID is NAT - T v7
7 October 19:38:36.214: ISAKMP: (0): load useful vendor id of treatment
7 October 19:38:36.214: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 157
7 October 19:38:36.214: ISAKMP: (0): provider ID is NAT - T v3
7 October 19:38:36.214: ISAKMP: (0): load useful vendor id of treatment
7 October 19:38:36.214: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123
7 October 19:38:36.214: ISAKMP: (0): provider ID is NAT - T v2
7 Oct 19:38:36.214: ISAKMP: (0): pair found pre-shared key matching 2.8.51.58
7 October 19:38:36.214: ISAKMP: (0): pre-shared key local found
7 October 19:38:36.214: ISAKMP: (0): IKE-> PKI get configured TrustPoints State (R) MM_NO_STATE (post 2.8.51.58)
7 October 19:38:36.214: ISAKMP: (0): ICP-> IKE Got set up TrustPoints State (R) MM_NO_STATE (post 2.8.51.58)
7 Oct 19:38:36.214: ISAKMP: (0): audit ISAKMP transform 1 against policy priority 5
7 Oct 19:38:36.214: ISAKMP: 3DES-CBC encryption
7 Oct 19:38:36.214: ISAKMP: MD5 hash
7 Oct 19:38:36.214: ISAKMP: default group 1
7 Oct 19:38:36.214: ISAKMP: auth RSA sig
7 Oct 19:38:36.214: ISAKMP: type of life in seconds
7 Oct 19:38:36.214: ISAKMP: life (IPV) 0 x 0 0 x 1 0 x 51 0x80
7 Oct 19:38:36.214: ISAKMP: (0): atts are acceptable. Next payload is 3
7 Oct 19:38:36.214: ISAKMP: (0): Acceptable atts: real life: 0
7 Oct 19:38:36.214: ISAKMP: (0): Acceptable atts:life: 0
7 Oct 19:38:36.214: ISAKMP: (0): fill atts in his vpi_length:4
7 Oct 19:38:36.214: ISAKMP: (0): fill atts in his life_in_seconds:86400
7 October 19:38:36.214: ISAKMP: (0): IKE-> PKI start PKI Session state (R) MM_NO_STATE (post 2.8.51.58)
7 October 19:38:36.214: ISAKMP: (0): ICP-> IKE started PKI Session state (R) MM_NO_STATE (post 2.8.51.58)
7 Oct 19:38:36.214: ISAKMP: (0): return real life: 86400
7 Oct 19:38:36.214: ISAKMP: (0): timer life Started: 86400.
7 October 19:38:36.214: ISAKMP: (0): load useful vendor id of treatment
7 October 19:38:36.214: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
7 Oct 19:38:36.214: ISAKMP (0): provider ID is NAT - T RFC 3947
7 October 19:38:36.214: ISAKMP: (0): load useful vendor id of treatment
7 October 19:38:36.214: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 245
7 Oct 19:38:36.214: ISAKMP (0): provider ID is NAT - T v7
7 October 19:38:36.214: ISAKMP: (0): load useful vendor id of treatment
7 October 19:38:36.214: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 157
7 October 19:38:36.214: ISAKMP: (0): provider ID is NAT - T v3
7 October 19:38:36.214: ISAKMP: (0): load useful vendor id of treatment
7 October 19:38:36.214: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123
7 October 19:38:36.214: ISAKMP: (0): provider ID is NAT - T v2
7 Oct 19:38:36.214: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
7 Oct 19:38:36.214: ISAKMP: (0): former State = new State IKE_R_MM1 = IKE_R_MM1
7 October 19:38:36.214: ISAKMP: (0): built of NAT - T of the seller-rfc3947 ID
7 October 19:38:36.214: ISAKMP: (0): lot of 2.8.51.58 sending my_port 500 peer_port 500 (R) MM_SA_SETUP
7 Oct 19:38:36.214: ISAKMP: (0): sending a packet IPv4 IKE.
7 Oct 19:38:36.214: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
7 Oct 19:38:36.214: ISAKMP: (0): former State = new State IKE_R_MM1 = IKE_R_MM2
7 Oct 19:38:36.240: ISAKMP (0): received 2.8.51.58 packet 500 Global 500 (R) sport dport MM_SA_SETUP
7 Oct 19:38:36.240: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
7 Oct 19:38:36.240: ISAKMP: (0): former State = new State IKE_R_MM2 = IKE_R_MM3
7 October 19:38:36.240: ISAKMP: (0): processing KE payload. Message ID = 0
7 October 19:38:36.242: ISAKMP: (0): processing NONCE payload. Message ID = 0
7 October 19:38:36.242: ISAKMP: (38618): payload processing CERT_REQ. Message ID = 0
7 October 19:38:36.242: ISAKMP: (38618): peer wants a cert CT_X509_SIGNATURE
7 October 19:38:36.242: ISAKMP: (38618): peer wants cert issued by cn = Tetra Pak Root CA - G1
7 October 19:38:36.242: ISAKMP: (38618): load useful vendor id of treatment
7 October 19:38:36.242: ISAKMP: (38618): provider ID is DPD
7 October 19:38:36.242: ISAKMP: (38618): load useful vendor id of treatment
7 October 19:38:36.242: ISAKMP: (38618): addressing another box of IOS!
7 October 19:38:36.242: ISAKMP: (38618): load useful vendor id of treatment
7 October 19:38:36.242: ISAKMP: (38618): provider ID seems the unit/DPD but major incompatibility of 209
7 October 19:38:36.242: ISAKMP: (38618): provider ID is XAUTH
7 Oct 19:38:36.242: ISAKMP: receives the payload type 20
7 Oct 19:38:36.242: ISAKMP (38618): sound not hash no match - this node outside NAT
7 Oct 19:38:36.242: ISAKMP: receives the payload type 20
7 Oct 19:38:36.242: ISAKMP (38618): No. NAT found for oneself or peer
7 Oct 19:38:36.242: ISAKMP: (38618): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
7 Oct 19:38:36.242: ISAKMP: (38618): former State = new State IKE_R_MM3 = IKE_R_MM3
7 October 19:38:36.243: ISAKMP: (38618): IKE-> PKI get configured TrustPoints State (R) MM_KEY_EXCH (post 2.8.51.58)
7 October 19:38:36.243: ISAKMP: (38618): ICP-> IKE Got set up TrustPoints State (R) MM_KEY_EXCH (post 2.8.51.58)
7 October 19:38:36.243: ISAKMP: (38618): IKE-> PKI obtain IssuerNames State (R) MM_KEY_EXCH (post 2.8.51.58)
7 October 19:38:36.243: ISAKMP: (38618): ICP-> IKE got IssuerNames State (R) MM_KEY_EXCH (post 2.8.51.58)
7 Oct 19:38:36.243: ISAKMP (38618): construction CERT_REQ for issuer cn = Tetra Pak issuing CA 01 - G1 n, dc = tp1, dc = ad1, dc is tetrapak, dc = com
7 October 19:38:36.243: ISAKMP: (38618): lot of 2.8.51.58 sending my_port 500 peer_port 500 (R) MM_KEY_EXCH
7 Oct 19:38:36.243: ISAKMP: (38618): sending a packet IPv4 IKE.
7 Oct 19:38:36.243: ISAKMP: (38618): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
7 Oct 19:38:36.243: ISAKMP: (38618): former State = new State IKE_R_MM3 = IKE_R_MM4
7 Oct 19:38:36.484: ISAKMP (38618): received 2.8.51.58 packet 500 Global 500 (R) sport dport MM_KEY_EXCH
7 Oct 19:38:36.484: ISAKMP: (38618): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
7 Oct 19:38:36.484: ISAKMP: (38618): former State = new State IKE_R_MM4 = IKE_R_MM5
7 October 19:38:36.484: ISAKMP: (38618): payload ID for treatment. Message ID = 0
7 Oct 19:38:36.484: ISAKMP (38618): payload ID
next payload: 6
type: 2
FULL domain name: s2s-lvrirt - 01.nvv .net .company .com
Protocol: 17
Port: 500
Length: 42
7 October 19:38:36.484: ISAKMP: (38618): processing CERT payload. Message ID = 0
7 October 19:38:36.484: ISAKMP: (38618): treatment of a cert CT_X509_SIGNATURE
7 October 19:38:36.484: ISAKMP: (38618): IKE-> certificate PKI add the peer of State (R) MM_KEY_EXCH (post 2.8.51.58)
7 October 19:38:36.485: ISAKMP: (38618): ICP-> certificate of the peer IKE Added State (R) MM_KEY_EXCH (post 2.8.51.58)
7 October 19:38:36.485: ISAKMP: (38618): IKE-> PKI get PeerCertificateChain State (R) MM_KEY_EXCH (post 2.8.51.58)
7 October 19:38:36.485: ISAKMP: (38618): ICP-> IKE got PeerCertificateChain State (R) MM_KEY_EXCH (post 2.8.51.58)
7 October 19:38:36.485: ISAKMP: (38618): pubkey from the counterpart is cached
7 October 19:38:36.485: ISAKMP: (38618): IKE-PKI > validate the chain of certificates of State (R) MM_KEY_EXCH (post 2.8.51.58)
7 October 19:38:36.485: ISAKMP: (38618): ICP-> IKE Validate string certificates of State (R) MM_KEY_EXCH (post 2.8.51.58)
7 October 19:38:36.485: ISAKMP: (38618): failed to get the certificate DN!
7 October 19:38:36.485: ISAKMP: (38618): payload processing GIS. Message ID = 0
7 Oct 19:38:36.486: ISAKMP: received payload type 17
7 October 19:38:36.486: ISAKMP: (38618): treatment protocol NOTIFIER INITIAL_CONTACT 1
SPI 0, message ID = 0, a = 0x7F1AA7CC5920
7 Oct 19:38:36.486: ISAKMP: (38618): SA authentication status:
authenticated
7 Oct 19:38:36.486: ISAKMP: (38618): SA has been authenticated with 2.8.51.58
7 Oct 19:38:36.486: ISAKMP: (38618): SA authentication status:
authenticated
7 October 19:38:36.486: ISAKMP: (38618): process of first contact.
lowering existing phase 1 and 2 with local 15.18.1.1 2.8.51.58 remote remote port 500
7 Oct 19:38:36.486: ISAKMP: (38617): received first contact, delete SA
7 Oct 19:38:36.486: ISAKMP: (38617): peer does not paranoid KeepAlive.
7 Oct 19:38:36.486: ISAKMP: (38617): deletion of 'Initial of receive Contact' State HIS reason (R) QM_IDLE (post 2.8.51.58)
7 Oct 19:38:36.486: ISAKMP: (38618): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
7 Oct 19:38:36.486: ISAKMP: (38618): former State = new State IKE_R_MM5 = IKE_R_MM5
7 Oct 19:38:36.487: ISAKMP: node set 2177251913 to QM_IDLE
7 October 19:38:36.487: ISAKMP: (38617): lot of 2.8.51.58 sending my_port 500 peer_port 500 (R) QM_IDLE
7 Oct 19:38:36.487: ISAKMP: (38617): sending a packet IPv4 IKE.
7 Oct 19:38:36.487: ISAKMP: (38617): purge the node 2177251913
7 Oct 19:38:36.487: ISAKMP: (38617): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
7 Oct 19:38:36.487: ISAKMP: (38617): former State = new State IKE_P1_COMPLETE = IKE_DEST_SA
7 October 19:38:36.487: ISAKMP: (38618): IKE-> PKI get self CertificateChain State (R) MM_KEY_EXCH (post 2.8.51.58)
7 October 19:38:36.487: ISAKMP: (38618): ICP-> IKE Got self CertificateChain State (R) MM_KEY_EXCH (post 2.8.51.58)
7 October 19:38:36.487: ISAKMP: (38618): IKE-> PKI obtain SubjectName State (R) MM_KEY_EXCH (post 2.8.51.58)
7 October 19:38:36.487: ISAKMP: (38618): ICP-> IKE got SubjectName State (R) MM_KEY_EXCH (post 2.8.51.58)
7 Oct 19:38:36.487: ISAKMP: (38618): My ID configured as IPv4 address, but Addr not in Cert!
7 Oct 19:38:36.487: ISAKMP: (38618): using domain FULL as my ID name
7 Oct 19:38:36.487: ISAKMP: (38618): ITS been RSA authentication of signature using id ID_FQDN type
7 Oct 19:38:36.487: ISAKMP (38618): payload ID
next payload: 6
type: 2
FULL domain name: dmvpn-selurt - 01.nvv .net .company .com
Protocol: 17
Port: 500
Length: 44
7 Oct 19:38:36.487: ISAKMP: (38618): the total payload length: 44
7 October 19:38:36.487: ISAKMP: (38618): IKE-> PKI is CertificateChain to be sent through peer review of State (R) MM_KEY_EXCH (post 2.8.51.58)
7 October 19:38:36.488: ISAKMP: (38618): ICP-> IKE got CertificateChain to be sent through peer review of State (R) MM_KEY_EXCH (post 2.8.51.58)
7 Oct 19:38:36.489: ISAKMP (38618): construction of CERT payload for hostname = selurt-dmvpn - 01.nvv .net .company .com, serialNumber = 4279180096
7 Oct 19:38:36.489: ISAKMP (38618): construction CERT payload for cn = Tetra Pak issuing CA 01 - G1 n, dc = tp1, dc = ad1, dc is tetrapak, dc = com
7 October 19:38:36.489: ISAKMP: (38618): using the key of the TP_NAD_CA trustpoint to sign pair
7 October 19:38:36.494: ISAKMP: (38618): lot of 2.8.51.58 sending my_port 500 peer_port 500 (R) MM_KEY_EXCH
7 Oct 19:38:36.494: ISAKMP: (38618): sending a packet IPv4 IKE.
7 Oct 19:38:36.494: ISAKMP: (38618): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
7 Oct 19:38:36.494: ISAKMP: (38618): former State = new State IKE_R_MM5 = IKE_P1_COMPLETE
7 Oct 19:38:36.494: ISAKMP: (38617): deletion of 'Initial of receive Contact' State HIS reason (R) QM_IDLE (post 2.8.51.58)
7 Oct 19:38:36.494: ISAKMP: (38617): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
7 Oct 19:38:36.494: ISAKMP: (38617): former State = new State IKE_DEST_SA = IKE_DEST_SA
7 Oct 19:38:36.494: ISAKMP: (38618): IKE_DPD is enabled, the initialization of timers
7 October 19:38:36.494: ISAKMP: (38618): IKE-> end of the PKI public PKI Session state (R) QM_IDLE (post 2.8.51.58)
7 October 19:38:36.494: ISAKMP: (38618): ICP-> IKE session completed ICP State (R) QM_IDLE (post 2.8.51.58)
7 Oct 19:38:36.494: ISAKMP: (38618): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
selurt-dmvpn-01 #.
7 Oct 19:38:36.494: ISAKMP: (38618): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE
selurt-dmvpn-01 #.
7 Oct 19:38:46.492: ISAKMP (38618): received 2.8.51.58 packet 500 Global 500 (R) sport dport QM_IDLE
7 October 19:38:46.492: ISAKMP: (38618): package of phase 1 is a duplicate of a previous package.
7 October 19:38:46.492: ISAKMP: (38618): retransmission due to phase 1 of retransmission
7 October 19:38:46.992: ISAKMP: (38618): transmit phase 1 QM_IDLE...
7 Oct 19:38:46.992: ISAKMP (38618): increment the count of errors on his, try 1 5: retransmit the phase 1
7 October 19:38:46.992: ISAKMP: (38618): transmit phase 1 QM_IDLE
7 October 19:38:46.992: ISAKMP: (38618): lot of 2.8.51.58 sending my_port 500 peer_port 500 (R) QM_IDLE
selurt-dmvpn-01 #.
7 Oct 19:38:46.992: ISAKMP: (38618): sending a packet IPv4 IKE.
selurt-dmvpn-01 #.
7 Oct 19:38:56.481: ISAKMP (38618): received 2.8.51.58 packet 500 Global 500 (R) sport dport QM_IDLE
7 October 19:38:56.481: ISAKMP: (38618): package of phase 1 is a duplicate of a previous package.
7 October 19:38:56.481: ISAKMP: (38618): retransmission due to phase 1 of retransmission
7 October 19:38:56.981: ISAKMP: (38618): transmit phase 1 QM_IDLE...
7 Oct 19:38:56.981: ISAKMP (38618): increment the count of errors on his, try 2 of 5: retransmit the phase 1
7 October 19:38:56.981: ISAKMP: (38618): transmit phase 1 QM_IDLE
7 October 19:38:56.981: ISAKMP: (38618): lot of 2.8.51.58 sending my_port 500 peer_port 500 (R) QM_IDLE
selurt-dmvpn-01 #.
7 Oct 19:38:56.981: ISAKMP: (38618): sending a packet IPv4 IKE.
selurt-dmvpn-01 #.
7 Oct 19:39:06.481: ISAKMP (38618): received 2.8.51.58 packet 500 Global 500 (R) sport dport QM_IDLE
7 October 19:39:06.481: ISAKMP: (38618): package of phase 1 is a duplicate of a previous package.
7 October 19:39:06.481: ISAKMP: (38618): retransmission due to phase 1 of retransmission
7 October 19:39:06.981: ISAKMP: (38618): transmit phase 1 QM_IDLE...
7 Oct 19:39:06.981: ISAKMP (38618): increment the count of errors on his, try 3 of 5: retransmit the phase 1
7 October 19:39:06.981: ISAKMP: (38618): transmit phase 1 QM_IDLE
7 October 19:39:06.981: ISAKMP: (38618): lot of 2.8.51.58 sending my_port 500 peer_port 500 (R) QM_IDLE
selurt-dmvpn-01 #.
7 Oct 19:39:06.981: ISAKMP: (38618): sending a packet IPv4 IKE.
selurt-dmvpn-01 #.
7 Oct 19:39:09.880: ISAKMP: (38616): serving SA., his is 7F1AA7721158, delme is 7F1AA7721158
selurt-dmvpn-01 #.
7 Oct 19:39:16.481: ISAKMP (38618): received 2.8.51.58 packet 500 Global 500 (R) sport dport QM_IDLE
7 October 19:39:16.481: ISAKMP: (38618): package of phase 1 is a duplicate of a previous package.
7 October 19:39:16.481: ISAKMP: (38618): retransmission due to phase 1 of retransmission
7 October 19:39:16.980: ISAKMP: (38618): transmit phase 1 QM_IDLE...
7 Oct 19:39:16.980: ISAKMP (38618): increment the count of errors on his, try 4 out 5: retransmit the phase 1
7 October 19:39:16.980: ISAKMP: (38618): transmit phase 1 QM_IDLE
7 October 19:39:16.980: ISAKMP: (38618): lot of 2.8.51.58 sending my_port 500 peer_port 500 (R) QM_IDLE
selurt-dmvpn-01 #.
7 Oct 19:39:16.980: ISAKMP: (38618): sending a packet IPv4 IKE.
selurt-dmvpn-01 #.
7 Oct 19:39:26.481: ISAKMP (38618): received 2.8.51.58 packet 500 Global 500 (R) sport dport QM_IDLE
7 October 19:39:26.482: ISAKMP: (38618): package of phase 1 is a duplicate of a previous package.
7 October 19:39:26.482: ISAKMP: (38618): retransmission due to phase 1 of retransmission
7 October 19:39:26.981: ISAKMP: (38618): transmit phase 1 QM_IDLE...
7 Oct 19:39:26.981: ISAKMP (38618): increment the count of errors on his, try 5 of 5: retransmit the phase 1
7 October 19:39:26.981: ISAKMP: (38618): transmit phase 1 QM_IDLE
7 October 19:39:26.981: ISAKMP: (38618): lot of 2.8.51.58 sending my_port 500 peer_port 500 (R) QM_IDLE
selurt-dmvpn-01 #.
7 Oct 19:39:26.981: ISAKMP: (38618): sending a packet IPv4 IKE.
selurt-dmvpn-01 #.
7 Oct 19:39:36.493: ISAKMP: (38617): serving SA., his is 7F1AA79AD9E0, delme is 7F1AA79AD9E0DMVPN speaks
7 October 19:38:36.181: ISAKMP: (0): profile of THE request is (NULL)
7 Oct 19:38:36.181: ISAKMP: created a struct peer 15.18.1.1, peer port 500
7 Oct 19:38:36.181: ISAKMP: new position created post = 0x2B1F480C peer_handle = 0x80001DF4
7 Oct 19:38:36.181: ISAKMP: lock struct 0x2B1F480C, refcount 1 to peer isakmp_initiator
7 Oct 19:38:36.181: ISAKMP: 500 local port, remote port 500
7 Oct 19:38:36.181: ISAKMP: set new node 0 to QM_IDLE
7 Oct 19:38:36.181: ISAKMP: find a dup her to the tree during the isadb_insert his 2B16C9FC = call BVA
7 Oct 19:38:36.181: ISAKMP: (0): cannot start aggressive mode, try the main mode.
7 Oct 19:38:36.181: ISAKMP: (0): pair found pre-shared key matching 15.18.1.1
7 October 19:38:36.181: ISAKMP: (0): IKE-> PKI get configured TrustPoints State (I) MM_NO_STATE (ext. 15.18.1.1)
7 October 19:38:36.181: ISAKMP: (0): ICP-> IKE Got set up TrustPoints State (I) MM_NO_STATE (ext. 15.18.1.1)
7 October 19:38:36.181: ISAKMP: (0): built of NAT - T of the seller-rfc3947 ID
7 October 19:38:36.181: ISAKMP: (0): built the seller-07 ID NAT - t
7 October 19:38:36.181: ISAKMP: (0): built of NAT - T of the seller-03 ID
7 October 19:38:36.181: ISAKMP: (0): built the seller-02 ID NAT - t
7 Oct 19:38:36.181: ISAKMP: (0): entry = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM
7 Oct 19:38:36.181: ISAKMP: (0): former State = new State IKE_READY = IKE_I_MM1
7 October 19:38:36.181: ISAKMP: (0): Beginner Main Mode Exchange
7 October 19:38:36.181: ISAKMP: (0): 15.18.1.1 package sending 500 peer_port 500 (I) my_port MM_NO_STATE
7 Oct 19:38:36.181: ISAKMP: (0): sending a packet IPv4 IKE.
7 Oct 19:38:36.205: ISAKMP (0): packet received 15.18.1.1 dport 500 sport Global 500 (I) MM_NO_STATE
7 Oct 19:38:36.205: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
7 Oct 19:38:36.205: ISAKMP: (0): former State = new State IKE_I_MM1 = IKE_I_MM2
7 October 19:38:36.205: ISAKMP: (0): treatment ITS payload. Message ID = 0
7 October 19:38:36.205: ISAKMP: (0): load useful vendor id of treatment
7 October 19:38:36.205: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
7 Oct 19:38:36.205: ISAKMP (0): provider ID is NAT - T RFC 3947
7 Oct 19:38:36.205: ISAKMP: (0): pair found pre-shared key matching 15.18.1.1
7 October 19:38:36.205: ISAKMP: (0): pre-shared key local found
7 Oct 19:38:36.205: ISAKMP: analysis of the profiles for xauth...
7 October 19:38:36.205: ISAKMP: (0): IKE-> PKI get configured TrustPoints State (I) MM_NO_STATE (ext. 15.18.1.1)
7 October 19:38:36.205: ISAKMP: (0): ICP-> IKE Got set up TrustPoints State (I) MM_NO_STATE (ext. 15.18.1.1)
7 Oct 19:38:36.205: ISAKMP: (0): audit ISAKMP transform 1 against policy priority 5
7 Oct 19:38:36.205: ISAKMP: 3DES-CBC encryption
7 Oct 19:38:36.205: ISAKMP: MD5 hash
7 Oct 19:38:36.205: ISAKMP: default group 1
7 Oct 19:38:36.205: ISAKMP: auth RSA sig
7 Oct 19:38:36.205: ISAKMP: type of life in seconds
7 Oct 19:38:36.205: ISAKMP: life (IPV) 0 x 0 0 x 1 0 x 51 0x80
7 Oct 19:38:36.205: ISAKMP: (0): atts are acceptable. Next payload is 0
7 Oct 19:38:36.205: ISAKMP: (0): Acceptable atts: real life: 0
7 Oct 19:38:36.205: ISAKMP: (0): Acceptable atts:life: 0
7 Oct 19:38:36.205: ISAKMP: (0): fill atts in his vpi_length:4
7 Oct 19:38:36.205: ISAKMP: (0): fill atts in his life_in_seconds:86400
7 October 19:38:36.205: ISAKMP: (0): IKE-> PKI start PKI Session state (I) MM_NO_STATE (ext. 15.18.1.1)
7 October 19:38:36.205: ISAKMP: (0): ICP-> IKE started PKI Session state (I) MM_NO_STATE (ext. 15.18.1.1)
7 Oct 19:38:36.205: ISAKMP: (0): return real life: 86400
7 Oct 19:38:36.205: ISAKMP: (0): timer life Started: 86400.
7 October 19:38:36.205: ISAKMP: (0): load useful vendor id of treatment
7 October 19:38:36.205: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
7 Oct 19:38:36.205: ISAKMP (0): provider ID is NAT - T RFC 3947
7 Oct 19:38:36.205: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
7 Oct 19:38:36.205: ISAKMP: (0): former State = new State IKE_I_MM2 = IKE_I_MM2
7 October 19:38:36.209: ISAKMP: (0): IKE-> PKI get configured TrustPoints State (I) MM_SA_SETUP (ext. 15.18.1.1)
7 October 19:38:36.209: ISAKMP: (0): ICP-> IKE Got set up TrustPoints State (I) MM_SA_SETUP (ext. 15.18.1.1)
7 October 19:38:36.209: ISAKMP: (0): IKE-> PKI obtain IssuerNames State (I) MM_SA_SETUP (ext. 15.18.1.1)
7 October 19:38:36.209: ISAKMP: (0): ICP-> IKE got IssuerNames State (I) MM_SA_SETUP (ext. 15.18.1.1)
7 Oct 19:38:36.209: ISAKMP (0): construction CERT_REQ for issuer cn = Tetra Pak Root CA - G1
7 October 19:38:36.209: ISAKMP: (0): 15.18.1.1 package sending 500 peer_port 500 (I) my_port MM_SA_SETUP
7 Oct 19:38:36.209: ISAKMP: (0): sending a packet IPv4 IKE.
7 Oct 19:38:36.209: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
7 Oct 19:38:36.209: ISAKMP: (0): former State = new State IKE_I_MM2 = IKE_I_MM3
7 Oct 19:38:36.233: ISAKMP (0): packet received 15.18.1.1 dport 500 sport Global 500 (I) MM_SA_SETUP
7 Oct 19:38:36.233: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
7 Oct 19:38:36.233: ISAKMP: (0): former State = new State IKE_I_MM3 = IKE_I_MM4
7 October 19:38:36.233: ISAKMP: (0): processing KE payload. Message ID = 0
7 October 19:38:36.245: ISAKMP: (0): processing NONCE payload. Message ID = 0
7 October 19:38:36.245: ISAKMP: (8329): payload processing CERT_REQ. Message ID = 0
7 October 19:38:36.245: ISAKMP: (8329): peer wants a cert CT_X509_SIGNATURE
7 October 19:38:36.245: ISAKMP: (8329): peer wants cert issued by cn = Tetra Pak issuing CA 01 - G1 n, dc = tp1, dc = ad1, dc is tetrapak, dc = com
7 Oct 19:38:36.249: choose trustpoint TP_NAD_CA as transmitter
7 October 19:38:36.249: ISAKMP: (8329): load useful vendor id of treatment
7 October 19:38:36.249: ISAKMP: (8329): provider ID is the unit
7 October 19:38:36.249: ISAKMP: (8329): load useful vendor id of treatment
7 October 19:38:36.249: ISAKMP: (8329): provider ID is DPD
7 October 19:38:36.249: ISAKMP: (8329): load useful vendor id of treatment
7 October 19:38:36.249: ISAKMP: (8329): addressing another box of IOS!
7 Oct 19:38:36.249: ISAKMP: receives the payload type 20
7 Oct 19:38:36.249: ISAKMP (8329): sound not hash no match - this node outside NAT
7 Oct 19:38:36.249: ISAKMP: receives the payload type 20
7 Oct 19:38:36.249: ISAKMP (8329): No. NAT found for oneself or peer
7 Oct 19:38:36.249: ISAKMP: (8329): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
7 Oct 19:38:36.249: ISAKMP: (8329): former State = new State IKE_I_MM4 = IKE_I_MM4
7 Oct 19:38:36.249: ISAKMP: (8329): send initial contact
7 October 19:38:36.249: ISAKMP: (8329): IKE-> PKI get self CertificateChain of State (I) MM_KEY_EXCH (ext. 15.18.1.1)
7 October 19:38:36.249: ISAKMP: (8329): ICP-> IKE Got self CertificateChain of State (I) MM_KEY_EXCH (ext. 15.18.1.1)
7 October 19:38:36.249: ISAKMP: (8329): IKE-> PKI obtain SubjectName State (I) MM_KEY_EXCH (ext. 15.18.1.1)
7 October 19:38:36.249: ISAKMP: (8329): ICP-> IKE got SubjectName State (I) MM_KEY_EXCH (ext. 15.18.1.1)
7 Oct 19:38:36.249: ISAKMP: (8329): My ID configured as IPv4 address, but Addr not in Cert!
7 Oct 19:38:36.249: ISAKMP: (8329): using domain FULL as my ID name
7 Oct 19:38:36.249: ISAKMP: (8329): ITS been RSA authentication of signature using id ID_FQDN type
7 Oct 19:38:36.249: ISAKMP (8329): payload ID
next payload: 6
type: 2
FULL domain name: s2s-lvrirt - 01.nvv .net .company .com
Protocol: 17
Port: 500
Length: 42
7 Oct 19:38:36.249: ISAKMP: (8329): the total payload length: 42
7 October 19:38:36.249: ISAKMP: (8329): IKE-> PKI is CertificateChain to send to the State peer (I) MM_KEY_EXCH (ext. 15.18.1.1)
7 October 19:38:36.253: ISAKMP: (8329): ICP-> IKE got CertificateChain to send to the State peer (I) MM_KEY_EXCH (ext. 15.18.1.1)
7 Oct 19:38:36.253: ISAKMP (8329): construction of CERT payload for hostname = s2s-lvrirt - 01.nvv .net .company .com, serialNumber = FCZ163860KW
7 October 19:38:36.253: ISKAMP: more send buffer from 1024 to 3072
7 October 19:38:36.253: ISAKMP: (8329): using the key of the TP_NAD_CA trustpoint to sign pair
7 October 19:38:36.449: ISAKMP: (8329): 15.18.1.1 package sending 500 peer_port 500 (I) my_port MM_KEY_EXCH
7 Oct 19:38:36.449: ISAKMP: (8329): sending a packet IPv4 IKE.
7 Oct 19:38:36.449: ISAKMP: (8329): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
7 Oct 19:38:36.449: ISAKMP: (8329): former State = new State IKE_I_MM4 = IKE_I_MM5
7 Oct 19:38:36.481: ISAKMP (8328): packet received 15.18.1.1 dport 500 sport Global 500 (I) MM_NO_STATE
7 October 19:38:46.449: ISAKMP: (8329): transmit phase 1 MM_KEY_EXCH...
7 Oct 19:38:46.449: ISAKMP (8329): increment the count of errors on his, try 1 5: retransmit the phase 1
7 October 19:38:46.449: ISAKMP: (8329): transmit phase 1 MM_KEY_EXCH
7 October 19:38:46.449: ISAKMP: (8329): 15.18.1.1 package sending 500 peer_port 500 (I) my_port MM_KEY_EXCH
7 Oct 19:38:46.449: ISAKMP: (8329): sending a packet IPv4 IKE.
7 Oct 19:38:54.709: ISAKMP: (8327): purge the node 1841056658
7 Oct 19:38:54.709: ISAKMP: (8327): purge the node-57107868
7 October 19:38:56.449: ISAKMP: (8329): transmit phase 1 MM_KEY_EXCH...
7 Oct 19:38:56.449: ISAKMP (8329): increment the count of errors on his, try 2 of 5: retransmit the phase 1
7 October 19:38:56.449: ISAKMP: (8329): transmit phase 1 MM_KEY_EXCH
7 October 19:38:56.449: ISAKMP: (8329): 15.18.1.1 package sending 500 peer_port 500 (I) my_port MM_KEY_EXCH
7 Oct 19:38:56.449: ISAKMP: (8329): sending a packet IPv4 IKE.
7 Oct 19:39:04.709: ISAKMP: (8327): serving SA., his is 3169E824, delme is 3169E824
7 Oct 19:39:06.181: ISAKMP: set new node 0 to QM_IDLE
7 Oct 19:39:06.181: ISAKMP: (8329): SA is still budding. Attached new request ipsec. (2.8.51.58 local, remote 15.18.1.1)
7 Oct 19:39:06.181: ISAKMP: error during the processing of HIS application: failed to initialize SA
7 Oct 19:39:06.181: ISAKMP: error while processing message KMI 0, error 2.
7 October 19:39:06.449: ISAKMP: (8329): transmit phase 1 MM_KEY_EXCH...
7 Oct 19:39:06.449: ISAKMP (8329): increment the count of errors on his, try 3 of 5: retransmit the phase 1
7 October 19:39:06.449: ISAKMP: (8329): transmit phase 1 MM_KEY_EXCH
7 October 19:39:06.449: ISAKMP: (8329): 15.18.1.1 package sending 500 peer_port 500 (I) my_port MM_KEY_EXCH
7 Oct 19:39:06.449: ISAKMP: (8329): sending a packet IPv4 IKE.
7 Oct 19:39:10.261: ISAKMP: (8328): purge the node-1445247076
7 October 19:39:16.449: ISAKMP: (8329): transmit phase 1 MM_KEY_EXCH...
7 Oct 19:39:16.449: ISAKMP (8329): increment the count of errors on his, try 4 out 5: retransmit the phase 1
7 October 19:39:16.449: ISAKMP: (8329): transmit phase 1 MM_KEY_EXCH
7 October 19:39:16.449: ISAKMP: (8329): 15.18.1.1 package sending 500 peer_port 500 (I) my_port MM_KEY_EXCH
7 Oct 19:39:16.449: ISAKMP: (8329): sending a packet IPv4 IKE.
7 Oct 19:39:20.261: ISAKMP: (8328): serving SA., his is 2AD85BD0, delme is 2AD85BD0
7 October 19:39:26.449: ISAKMP: (8329): transmit phase 1 MM_KEY_EXCH...
7 Oct 19:39:26.449: ISAKMP (8329): increment the count of errors on his, try 5 of 5: retransmit the phase 1
7 October 19:39:26.449: ISAKMP: (8329): transmit phase 1 MM_KEY_EXCH
7 October 19:39:26.449: ISAKMP: (8329): 15.18.1.1 package sending 500 peer_port 500 (I) my_port MM_KEY_EXCH
7 Oct 19:39:26.449: ISAKMP: (8329): sending a packet IPv4 IKE.
7 October 19:39:36.449: ISAKMP: (8329): transmit phase 1 MM_KEY_EXCH...
7 Oct 19:39:36.449: ISAKMP: (8329): peer does not paranoid KeepAlive.
7 Oct 19:39:36.449: ISAKMP: (8329): removal of reason ITS status of 'Death by retransmission P1' (I) MM_KEY_EXCH (ext. 15.18.1.1)
7 Oct 19:39:36.449: ISAKMP: (8329): removal of reason ITS status of 'Death by retransmission P1' (I) MM_KEY_EXCH (ext. 15.18.1.1)Mike,
Concentrator sends his cert but never spoke glow, it is usually a problem with the fragmentation of handling in transit networks.
Sniff the two end you can control and check if you are not missing any fragment on end spoke.
Could be as simple as a MTU problem on your end, or could be something in the path try reassambly.
Several ways to go, check your end if the fragments are missing in transit - begin studying with ISP (s).
M.
-
Edge gateway deployment fails - vShiel-edge do not license
Hi, I am deploying a network organization VDC but mislead Sayingthe that follows:
edge gateway deployment failed, error response VSM (214) do not license for the entity: vShield-edge feature: add on
I have vSphere 5.5 and vShield Manager 5.5.0a.
The State of the license for the vCloud network and security evaluation mode and expired
for vSphere Enterprise I have more licenses so I should be allowed for the vShield edge feature, but I'm not able to change the vCloud network and security not to say expired and evaluation mode. I also saw the KB2036875 who says not to wory said well that is for en earlier version of vSphere.
Any suggestions?
Thank you
John
Check this KB
Concerning
Girish
-
See 5.3 and 8.1 of Windows domain join fails
Hi all
I just upgraded view server and view composer 5.2 to 5.3 connections. Always running vSphere/vCenter 5.0, but these are listed as supported in the support matrix.
My related stocks work fine (XP and Windows 7). I tried to add a new Pool of Windows with the last Agent of view 8.1 installed on it but get "view composer agent error initialization state (18) could not join the domain. The irony is that he actually join to the domain, but the State of the virtual machine to get in an error state, so it cannot be used.
Here's my log of the agent
VMware-viewcomposer-ga - new.log
2013-12-12 11:11:45, 563 [1336] INFO VolumesReady - [VolumesReady.cpp, 115] launch of the script to join the domain: C:\Program Files (x 86) \Common Files\VMware\View composer invited Agent\vmware-svi - ga.exe /JoinDomain
2013-12-12 11:11:45, 563 [1336] DEBUG Wow64FsRedirectionOff - [Wow64FsRedirectionOff.cpp, 109] redirection disabled with success of WOW FS.
2013-12-12 11:11:45, 751 [2180] INFO CSvmGaService - [svmGaService.cpp, 87] Initializing Service
2013-12-12 11:11:45, 766 [2180] INFO CustomizationPersistentInfoReg - [CustomizationPersistentInfoReg.cpp, 98] registry key open comments to access personalization information.
2013-12-12 11:11:45, 766 [2180] DEBUG SvmDisk - [SvmDisk.cpp, 55] found signature file //?/Volume{c7751884-6347-11e3-8259-806e6f6e6963}/simvol.dat to the volume mount point with \\?\Volume{c7751884-6347-11e3-8259-806e6f6e6963}\ * and use 001
2013-12-12 11:11:45, 766 [2180] INFO CSvmGaService - [svmGaService.cpp, 214] policy found on the volume file: \\?\Volume{c7751884-6347-11e3-8259-806e6f6e6963}\
2013-12-12 11:11:46, 876 [2180] INFO CSvmGaService - [svmGaService.cpp, 305] analyzed the signatures of disk and the policy successfully
2013-12-12 11:11:46, 876 [2180] DEBUG CSvmGaService - [svmGaService.cpp, 131] domain Joining
2013-12-12 11:11:46, 876 [2180] INFO Guest - [Guest.cpp, 272] trying to reach Station1 to the contoso.com domain
2013-12-12 11:11:47, 719 [2180] FATAL Guest - [Guest.cpp, 285] domain join failed: 2
2013-12-12 11:11:47, 829 [2180] FATAL CSvmGaService - [svmGaService.cpp, 134] Domain join failedError 2 (0x2): the system cannot find the specified file.
Any thoughts?
Hi everyone again once
I opened a ticket with VMware support, and to my surprise, the recommendation has changed for the construction of parent vm for the linked clones. Now VMware recommends for Windows 8 parent VM, that they are not joined to the domain. (they should be only machines of the Working Group). I hope this helps someone.
-
CSV to Oracle - (integration) fails on ORACLE connection target
Hello
I'm trying to load data from a csv file into Oracle db by ODI.
Here are the steps I followed:
1 created the physical schema FILE
1 created the physical schema and an Oracle data server in the physical Architecture
2 - creation and related to logical schemas
3 created the corresponding data models and the shops
wheat to display the contents of CSV data and target in ODI table.
4 - creating the interface, add csv as source and oracle table as the target
5 used "LKM File to SQL" and "IKM SQL append" (FLOW_CONTROL is false)
When I run the interface, the session starts while I'm getting the wrror following in operator:
ODI-1228: ARIBA_G1 (integration) task fails on ORACLE DEV_DW connection target.
Caused by: java.sql.SQLException: SQL92 no token taken in charge at position: 116
at oracle.jdbc.driver.OracleSql.handleODBC(OracleSql.java:1319)
at oracle.jdbc.driver.OracleSql.parse(OracleSql.java:1190)
at oracle.jdbc.driver.OracleSql.getSql(OracleSql.java:341)
at oracle.jdbc.driver.OracleSql.getSqlBytes(OracleSql.java:649)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1079)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3937)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1535)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:263)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
This is the section of Code:
BeanShell script error: source file: online assessment: "if (odiRef.getUserExit("FLOW_CONTROL").equals("1")) {out.print ("\ninsert int... ": Typed variable declaration: error in calling the method: getDataSetMin() method not found in class 'com.sunopsis.dwg.snpreference.SnpReferenceInterne': line: 25: in file: online assessment:" if (odiRef.getUserExit("FLOW_CONTROL").equals("1")) {out.print ("\ninsert int... (": odiRef .getDataSetMin)
Info OSB: insert new lines to the line: column 0: columnNo
If (odiRef.getUserExit("FLOW_CONTROL").equals("1")) {out.print ("\ninsert into\t");
out. Print (odiRef.GetTable ("L", "TARG_NAME", "A"));
out. Print ("\n (\n\tclick");
out. Print (odiRef.getColList ("", "[column] ',' \\n\\t ', ' ', '((INS and!")) (("(TRG) and REW) '));
out. Print ("\n\tclick");
out. Print (odiRef.getColList ("," "[column]", ', \\n\\t ', ' ', ' ((INS and TRG) and REW) '));
out. Print ("\n") \nselect\t");
out. Print (odiRef.getColList ("", "[column] ',' \\n\\t ', ' ', '((INS and!")) (("(TRG) and REW) '));
out. Print ("\n\tclick");
out. Print (odiRef.getColList (","[EXPRESSION]", ', \\n\\t ', ' ', ' ((INS and TRG) and REW) '));
out. Print ("\nfrom\t");
out. Print (odiRef.GetTable ("L", "INT_NAME", "A"));
out. Print ("\n");
} else {out.print ("\ninsert into\t");
out. Print (odiRef.GetTable ("L", "TARG_NAME", "A"));
out. Print ("\n (\n\tclick");
out. Print (odiRef.getColList ("", "[column] ',' \\n\\t ', ' ', '((INS and!")) (("(TRG) and REW) '));
out. Print ("\n\tclick");
out. Print (odiRef.getColList ("," "[column]", ', \\n\\t ', ' ', ' ((INS and TRG) and REW) '));
out. Print ("\n") \n\nselect\n ");
out. Print (odiRef.getColList ("", "[column] ',' \\n\\t ', ' ', '((INS and!")) (("(TRG) and REW) '));
out. Print ("\n");
out. Print (odiRef.getColList (","[EXPRESSION]", ', \\n\\t ', ' ', ' ((INS and TRG) and REW) '));
out. Print ("\nFROM (\t\n");
for (int i = odiRef.getDataSetMin (); i < = odiRef.getDataSetMax (); i ++) {out.print ("\n");
out. Print (odiRef.getDataSet (i, "Operator"));
out. Print ("\nselect \t");
out. Print (odiRef.getPop ("DISTINCT_ROWS"));
out. Print ("\n\tclick");
out. Print (odiRef.getColList (i,"", "[EXPRESSION] [column]", ', \\n\\t ', ' ', '((INS and!)) (("(TRG) and REW) '));
out. Print ("\nfrom\t");
out. Print (odiRef.getFrom (i));
out. Print ("\nwhere\t");
If (odiRef.getDataSet (i, "HAS_JRN").equals("1")) {out.print ("\n\tJRN_FLAG <>has ' \t");}
} else {out.print("\t(1=1)\t");}
} out.print ("\n");
out. Print (odiRef.getJoin (i));
out. Print ("\n");
out. Print (odiRef.GetFilter (i));
out. Print ("\n");
out. Print (odiRef.getJrnFilter (i));
out. Print ("\n");
out. Print (odiRef.getGrpBy (i));
out. Print ("\n");
out. Print (odiRef.getHaving (i));
out. Print ("\n");
} out.print ("\n)"); "
out. Print (odiRef.GetInfo ("DEST_TAB_ALIAS_WORD"));
out. Print ("ODI_GET_FROM\n\n");
} out.print ("\n");ORIGINAL TEXT *.
< % if (odiRef.getUserExit("FLOW_CONTROL").equals("1")) {% >}
Insert into < % = odiRef.getTable ("L", "TARG_NAME", "A") % >
(
< % = odiRef.getColList ("", "[column] ',' \n\tclick ', ' ', '((INS and!") ("(TRG) and REW)") % >
< % = odiRef.getColList ("," "[column]", ', \n\tclick ', ' ', ' ((INS and TRG) and REW) ") % >
)
Select < % = odiRef.getColList ("", "[column] ',' \n\tclick ', ' ', '((INS and!") ("(TRG) and REW)") % >
< % = odiRef.getColList (","[EXPRESSION]", ', \n\tclick ', ' ', ' ((INS and TRG) and REW)") % >
< % = odiRef.getTable ("L", "INT_NAME", "A") % >
< %} else {% >}
Insert into < % = odiRef.getTable ("L", "TARG_NAME", "A") % >
(
< % = odiRef.getColList ("", "[column] ',' \n\tclick ', ' ', '((INS and!") ("(TRG) and REW)") % >
< % = odiRef.getColList ("," "[column]", ', \n\tclick ', ' ', ' ((INS and TRG) and REW) ") % >
)Select
< % = odiRef.getColList ("", "[column] ',' \n\tclick ', ' ', '((INS and!") ("(TRG) and REW)") % >
< % = odiRef.getColList (","[EXPRESSION]", ', \n\tclick ', ' ', ' ((INS and TRG) and REW)") % >
DE)
< % for (int i = odiRef.getDataSetMin (); i < = odiRef.getDataSetMax (); i ++) {% >}
< %=odiRef.getDataSet (i, "Operator") % >
Select < % = odiRef.getPop ("DISTINCT_ROWS") % >
< %=odiRef.getColList (i,"", "[EXPRESSION] [column]", ', \n\tclick ', ' ', '((INS and!) ("(TRG) and REW)") % >
< % = odiRef.getFrom (i) % >
where < % if (odiRef.getDataSet (i, "HAS_JRN").equals("1")) {% >}
JRN_FLAG <>would be "< other %} {% > (1 = 1) < %} % >}"
< % = odiRef.getJoin (i) % >
< % = odiRef.getFilter (i) % >
< % = odiRef.getJrnFilter (i) % >
< % = odiRef.getGrpBy (i) % >
< % = odiRef.getHaving (i) % >
< %} % >
) < % = OdiRef.getInfo ("DEST_TAB_ALIAS_WORD") % > ODI_GET_FROM< %} % >
Any suggestions are appreciated.
Mike
Hi Sara,.
No, no error or bad files.
In fact, the data is moved correctly into the temporary table created by ODI, but not the final target table.
I discovered the reason if the knowledge modules imported were of another ODI installation!
I made sure to import the good KM and it worked.
Thank you!
-
Could not find the ORA error behind this failed task
Hi friends,
In the part of the load, I got a task that failed following two as
I found the log file for the task that has failed two above to the location (D > orahome > 10gR3_1 > bifoundation > dac > Journal)SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive
For, SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive I found the newspaper below
For SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive I found the newspaper belowAll Task Batches Preceding Actions ------------------------------ SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template ------------------------------ 2012-07-30 16:17:12.625 SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template has started. Running Custom Sql list SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template Source: "BIAPPS" Tables: W_GL_ACCOUNT_D W_ORA_GLREVAGGR_F_TMP W_ORA_GROUP_ACCOUNT_NUM_D_TMP W_ORA_GL_REVN_GL_F_TMP Target: "BIAPPS" Tables: W_GL_REVN_FS Default retries for this custom SQL is 1. executing sql (Truncate:W_GL_REVN_FS:BIAPPS) TRUNCATE TABLE W_GL_REVN_FS "Truncate" for W_GL_REVN_FS succeeded on "BIAPPS" Succeeded Successfully executed : SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template (Number of retries : 1) Commands executed : SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template 2012-07-30 16:17:12.75 SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template has finished execution with Completed status. ------------------------------ Truncate Batch ------------------------------ TRUNCATE TABLE:W_GL_REVN_FS ------------------------------ 2012-07-30 16:17:12.828 TRUNCATE TABLE:W_GL_REVN_FS has started. Successfully executed : TRUNCATE TABLE:W_GL_REVN_FS (Number of retries : 1) Commands executed : TRUNCATE TABLE W_GL_REVN_FS 2012-07-30 16:17:12.828 TRUNCATE TABLE:W_GL_REVN_FS has finished execution with Completed status. ------------------------------ Informatica Session Batch Upon Failure Restart Actions ------------------------------ TRUNCATE TABLE:W_GL_REVN_FS ------------------------------ 2012-07-30 16:17:12.828 TRUNCATE TABLE:W_GL_REVN_FS has started. Successfully executed : TRUNCATE TABLE:W_GL_REVN_FS (Number of retries : 1) Commands executed : TRUNCATE TABLE W_GL_REVN_FS 2012-07-30 16:17:12.828 TRUNCATE TABLE:W_GL_REVN_FS has finished execution with Completed status. ------------------------------ ------------------------------ INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_GLRevenueFact_DiffManDerive:(Source : FULL Target : FULL) ------------------------------ 2012-07-30 16:17:12.843 INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_GLRevenueFact_DiffManDerive:(Source : FULL Target : FULL) has started. ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_GLRevenueFact_DiffManDerive:(Source : FULL Target : FULL) MESSAGE::: Irrecoverable Error pmcmd startworkflow -sv Oracle_BI_DW_Base_Integration_Service -d Domain_BIAPPS -u Administrator -p **** -f SDE_ORA11510_Adaptor -lpf D:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\\BIAPPS.BIAPPS.SDE_ORA11510_Adaptor.SDE_ORA_Stage_GLRevenueFact_DiffManDerive.txt SDE_ORA_Stage_GLRevenueFact_DiffManDerive Status Desc : Failed WorkFlowMessage : ===================================== STD OUTPUT ===================================== Informatica(r) PMCMD, version [8.6.1 HotFix6], build [319.0622], Windows 32-bit Copyright (c) Informatica Corporation 1994 - 2009 All Rights Reserved. Invoked at Mon Jul 30 16:17:39 2012 Connected to Integration Service: [Oracle_BI_DW_Base_Integration_Service]. Integration Service status: [Running] Integration Service startup time: [Sun Jul 29 10:41:49 2012] Integration Service current time: [Mon Jul 30 16:17:39 2012] Folder: [SDE_ORA11510_Adaptor] Workflow: [SDE_ORA_Stage_GLRevenueFact_DiffManDerive] version [1]. Workflow run status: [Failed] Workflow run error code: [36331] Workflow run error message: [WARNING: Session task instance [SDE_ORA_Stage_GLRevenueFact_DiffManDerive] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_Stage_GLRevenueFact_DiffManDerive] will be failed.] Workflow run id [2233]. Start time: [Mon Jul 30 16:17:18 2012] End time: [Mon Jul 30 16:17:24 2012] Workflow log file: [D:\Informatica\PowerCenter8.6.1\server\infa_shared\WorkflowLogs\SDE_ORA_Stage_GLRevenueFact_DiffManDerive.log] Workflow run type: [User request] Run workflow as user: [Administrator] Run workflow with Impersonated OSProfile in domain: [] Integration Service: [Oracle_BI_DW_Base_Integration_Service] Disconnecting from Integration Service Completed at Mon Jul 30 16:17:39 2012 ===================================== ERROR OUTPUT ===================================== Error Message : Unknown reason for error code 36331 ErrorCode : 36331 EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:183) com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:411) com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:307) com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:214) com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:586) com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63) java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) java.util.concurrent.FutureTask.run(FutureTask.java:138) java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441) java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) java.util.concurrent.FutureTask.run(FutureTask.java:138) java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885) java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907) java.lang.Thread.run(Thread.java:619) (Number of retries : 1) pmcmd startworkflow -sv Oracle_BI_DW_Base_Integration_Service -d Domain_BIAPPS -u Administrator -p **** -f SDE_ORA11510_Adaptor -lpf D:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\\BIAPPS.BIAPPS.SDE_ORA11510_Adaptor.SDE_ORA_Stage_GLRevenueFact_DiffManDerive.txt SDE_ORA_Stage_GLRevenueFact_DiffManDerive 2012-07-30 16:17:40.109 INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_GLRevenueFact_DiffManDerive:(Source : FULL Target : FULL) has finished execution with Failed status. ------------------------------ Analyze Table Batch ------------------------------ ANALYZE TABLE:W_GL_REVN_FS ------------------------------ Not Executed ------------------------------
But the error, I couldn't analyze the exact ORA error of the foregoing two session that does not. Can you friends, help me with the cause of this error so that I can recitfy this inorder to errors for my task failed to run correctly.All Task Batches Preceding Actions ------------------------------ SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template ------------------------------ 2012-07-30 16:17:12.703 SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template has started. Running Custom Sql list SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template Source: "BIAPPS" Tables: W_ORA_AR_XACTS_GL_F_TMP W_ORA_ARAGGR_F_TMP Target: "BIAPPS" Tables: W_AR_XACT_FS Default retries for this custom SQL is 1. executing sql (Truncate:W_AR_XACT_FS:BIAPPS) TRUNCATE TABLE W_AR_XACT_FS "Truncate" for W_AR_XACT_FS succeeded on "BIAPPS" Succeeded Successfully executed : SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template (Number of retries : 1) Commands executed : SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template 2012-07-30 16:17:12.968 SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template has finished execution with Completed status. ------------------------------ Truncate Batch ------------------------------ TRUNCATE TABLE:W_AR_XACT_FS ------------------------------ 2012-07-30 16:17:13.0 TRUNCATE TABLE:W_AR_XACT_FS has started. Successfully executed : TRUNCATE TABLE:W_AR_XACT_FS (Number of retries : 1) Commands executed : TRUNCATE TABLE W_AR_XACT_FS 2012-07-30 16:17:13.0 TRUNCATE TABLE:W_AR_XACT_FS has finished execution with Completed status. ------------------------------ Informatica Session Batch Upon Failure Restart Actions ------------------------------ TRUNCATE TABLE:W_AR_XACT_FS ------------------------------ 2012-07-30 16:17:13.0 TRUNCATE TABLE:W_AR_XACT_FS has started. Successfully executed : TRUNCATE TABLE:W_AR_XACT_FS (Number of retries : 1) Commands executed : TRUNCATE TABLE W_AR_XACT_FS 2012-07-30 16:17:13.0 TRUNCATE TABLE:W_AR_XACT_FS has finished execution with Completed status. ------------------------------ ------------------------------ INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_ARTransactionFact_DiffManDerive:(Source : FULL Target : FULL) ------------------------------ 2012-07-30 16:17:13.0 INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_ARTransactionFact_DiffManDerive:(Source : FULL Target : FULL) has started. ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_ARTransactionFact_DiffManDerive:(Source : FULL Target : FULL) MESSAGE::: Irrecoverable Error pmcmd startworkflow -sv Oracle_BI_DW_Base_Integration_Service -d Domain_BIAPPS -u Administrator -p **** -f SDE_ORA11510_Adaptor -lpf D:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\\BIAPPS.BIAPPS.SDE_ORA11510_Adaptor.SDE_ORA_Stage_ARTransactionFact_DiffManDerive.txt SDE_ORA_Stage_ARTransactionFact_DiffManDerive Status Desc : Failed WorkFlowMessage : ===================================== STD OUTPUT ===================================== Informatica(r) PMCMD, version [8.6.1 HotFix6], build [319.0622], Windows 32-bit Copyright (c) Informatica Corporation 1994 - 2009 All Rights Reserved. Invoked at Mon Jul 30 16:17:39 2012 Connected to Integration Service: [Oracle_BI_DW_Base_Integration_Service]. Integration Service status: [Running] Integration Service startup time: [Sun Jul 29 10:41:49 2012] Integration Service current time: [Mon Jul 30 16:17:39 2012] Folder: [SDE_ORA11510_Adaptor] Workflow: [SDE_ORA_Stage_ARTransactionFact_DiffManDerive] version [1]. Workflow run status: [Failed] Workflow run error code: [36331] Workflow run error message: [WARNING: Session task instance [SDE_ORA_Stage_ARTransactionFact_DiffManDerive] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_Stage_ARTransactionFact_DiffManDerive] will be failed.] Workflow run id [2236]. Start time: [Mon Jul 30 16:17:19 2012] End time: [Mon Jul 30 16:17:24 2012] Workflow log file: [D:\Informatica\PowerCenter8.6.1\server\infa_shared\WorkflowLogs\SDE_ORA_Stage_ARTransactionFact_DiffManDerive.log] Workflow run type: [User request] Run workflow as user: [Administrator] Run workflow with Impersonated OSProfile in domain: [] Integration Service: [Oracle_BI_DW_Base_Integration_Service] Disconnecting from Integration Service Completed at Mon Jul 30 16:17:39 2012 ===================================== ERROR OUTPUT ===================================== Error Message : Unknown reason for error code 36331 ErrorCode : 36331 EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:183) com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:411) com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:307) com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:214) com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:586) com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63) java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) java.util.concurrent.FutureTask.run(FutureTask.java:138) java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441) java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) java.util.concurrent.FutureTask.run(FutureTask.java:138) java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885) java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907) java.lang.Thread.run(Thread.java:619) (Number of retries : 1) pmcmd startworkflow -sv Oracle_BI_DW_Base_Integration_Service -d Domain_BIAPPS -u Administrator -p **** -f SDE_ORA11510_Adaptor -lpf D:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\\BIAPPS.BIAPPS.SDE_ORA11510_Adaptor.SDE_ORA_Stage_ARTransactionFact_DiffManDerive.txt SDE_ORA_Stage_ARTransactionFact_DiffManDerive 2012-07-30 16:17:40.453 INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_ARTransactionFact_DiffManDerive:(Source : FULL Target : FULL) has finished execution with Failed status. ------------------------------ Analyze Table Batch ------------------------------ ANALYZE TABLE:W_AR_XACT_FS ------------------------------ Not Executed ------------------------------
Thanks in advance.
Kind regards
Saromeans that 'If this task fails that be parent' if the session fails, you're in the failure of the workflow state. DAC knows only the workflow state.
If you run the workflow in WFM, mark the task as completed in DAC.Tasks of children (Drop, Create, Informatica) DAC-> current Run-> in the lower pane, select all tasks, and then click the Details button
a pop window shows the list of tasks if exists elsewhere only a task will show you that is task Informatica.Right-click on the task-> update records-> (the State of the list Select)
Hope this helps
-
Procedure will fail with an error ODI-1226 and 1228 in 11g
I tried to delete a target in ERPI appliction, but I receive the following error message in the operator. I'm using ODI 11 g. Anyone have any suggestions to fix the error.
ODI-1226: P_source_system_id step fails after 1 attempt.
ODI-1228: P_source_system_id (Variable) of the task fails when you connect target ERPI_DATA_SERVER.
Caused by: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:924)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1261)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1419)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3806)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1667)
at oracle.odi.query.JDBCTemplate.executeQuery(JDBCTemplate.java:189)
at oracle.odi.runtime.agent.execution.sql.RefreshVariableExecutor.execute(RefreshVariableExecutor.java:54)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlV.processTask(SnpSessTaskSqlV.java:401)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlV.treatTask(SnpSessTaskSqlV.java:230)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1595)
to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ 2.doAction(StartScenRequestProcessor.java:580)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)
to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ StartScenTask.doExecute (StartScenRequestProcessor.java:1070)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:619)Since the error message that you are referencing a table that does not exist. Check your code and for the object / the correct schema to use.
-
Server SOA is not... launched tons of errors saying CONFIGURATION FAILED!
Hello SOA experts, can you please help me! I tried the solution to my problem in the lot of forums but I have not found anyone with my problem, except one person in 2010 but
Nobody answered to him and no idea why?
Hopefully some expert SOA will help me.
I have installed soa suite 11.1.1.5.0 nearly 15 times. But the server happens only the first time and I can deploy SOA application and test it.
But once I stop the server consistently, then no more server just came up. Instead, I get 100's of errors saying
< 7 December 2011 8:18:40 CEST > < WARNING > < HTTP > < BEA-101162 > < com.sun.faces.config.ConfigureListener listener has not defined by user: com.sun.faces.config.Configurat
ionException: CONFIGURATION FAILED! javax.faces.event.ActionListener and tons of errors saying "< cannot set the activation state of true to the application...". » :
< 7 December 2011 14:18:55 this > < WARNING > < HTTP > < BEA-101162 > < com.sun.faces.config.ConfigureListener listener has not defined by user: com.sun.faces.config.Configura
ionException: CONFIGURATION FAILED! javax.faces.event.ActionListener.
com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! javax.faces.event.ActionListener
at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:214)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:200)
to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
Truncated. check the log file full stacktrace
Caused by: java.lang.ClassNotFoundException: javax.faces.event.ActionListener
< impossible to affect the activation state of the application "ApproveTaskDetails". ............. Caused by: java.lang.ClassNotFoundException: javax.faces.event.ActionListener
< BEA-149231 > < cannot create the activation state to true for the application "POProcessing". ........ Caused by: java.lang.ClassNotFoundException: javax.faces.event.ActionListener
< error > < hats > < BEA-149231 > < cannot create the activation state to true for thei application 'usermessagingserver '. ...................... Caused by: java.lang.ClassNotFoundException: javax.faces.event.ActionListener
< BEA-101162 > < com.sun.faces.config.ConfigureListener listener has not defined by user: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! javax.faces.event.ActionListener.
com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! javax.faces.event.ActionListener...
......
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.lang.ClassNotFoundException: javax.faces.event.ActionListener
in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged (Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)
.........................................................
Because of not enough RAM ? I * 3.45 GB of RAM and 30 GB available in my hard dur.* Oracle XE is running by taking the 500 MB of RAM. As soon as I start my m/c, I'm trying to implement SOA server, but he died by throwing over the mistakes.
I'm really handicapped now by not only not my SOA server. My domain name has only one server. No separate server from SOA. I was not choosing BAM when I created the field.
I can send you described the papers if you wish.
Really appreciate your help.
Thank you.Hi Jyothi
I think the problem is maybe too long Classpath. I compared your entries to adminserver.log and mine, specially the variables file approx. We're like "java.class.path". The value of this on my side is like 2200 characters and the last entry is "xqrl.jar". But on your side, it's like 6600 characters. You can find "xqrl.jar" and see the entries after that. He had many entries of your c:\Jwhich\build\lib\jwhich.jar;c:\jyothi_workspace slots. Now big question why do you have these entries. What is 'jyothi_workspace' have. If possible, check your files setDomainEnv and setSOADomainEnv to these entries and for the moment to remove those.You can restore the changes you did as "/" to "------" etc. Or just create new domain. Area just to help Wizard Config. Do not install anything. If possible, send your phone number to my email ID. I'll quickly call you by phone.
I suppose that, if classpath is too long it is not load all the modules, I guess that since the classpath.
Thank you
Ravi Jegga -
Failed to load with error [3303
Hi, guys.
Can someone help me?
When I run the odi interface to load data from oracle 11g to essbase-essbase 11 demo data base;
the case is:
Failed to load with error [3303
C1_YEAR, C2_MARKET, C3_PRODUCT, C4_ACCOUNTS, C5_SCENARIO, C6_DATA, Error_Reason
""Qtr2', 'Is', 'Audio', 'Margin', 'Real', 1 ', ' failed to load with error [3303: Qtr2, East, Audio, marge, real, 1 member not found in database.]
and newspapers is
org.apache.bsf.BSFException: exception of Jython:
Traceback (most recent call changed):
File "< string >", line 26, < module >
at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData (unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: error reached records the maximum error threshold: 1
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:263)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
Thank you!You use a rule to load? It seems to me that you are not correct separator between ODI and essbase.
It seems that you all members of loading as a single string when they should be spaced, check in the options of revenge against the State of charge and make sure they have the same delimiter.
By default in the IKM will be fixed to the comma, in the rule of load, it can be set to the tab, open the rule of load, go to Options > data source properties > make sure that the separator is the comma.See you soon
John
http://John-Goodwin.blogspot.com/ -
I got this error:
"CoreTelephony Trace file error
A file for CoreTelephony tracing operation failed, you might run out of disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted"I tried to solve it by searching for CoreTelephony errors. Could not resolve yet.
Software does not, especially of photoshop...Any ideas?
Same thing here, iMac with OS X 10.11.6. All started a couple days ago. Have not found any valid solution online yet, I tried rebooting in recovery mode and check disk, but it seems that everything is ok with the drives and permissions.
-
Printer "filter failed" for macOS Sierra?
Hi all
I have upgraded my iMac and MacBook Pro with the new macOS Sierra and did not have a lot of problems until recently. As my exams are approaching, I print on my printer, Canon E560 comments. However, recently, some pages may not be printed and printing stops. He said "stopped -"filter"failed", and I can't find a way to solve this problem. I did this experiment several times, and in early printing, it is said immediately that the filter is not on my computer, but continues to print up to a page where it stops. Some pictures on the already printed pages are distorted. Is this related to the Sierra macOS? This is true for my two computers. I replaced the cartridges of ink, but in vain. I've also sent cannon on it, but they take a lot of time to answer me.
I have another printer on the floor in my house, which is of my fathers. So, I tried printing with it, but words have white lines through it, for some pages. This shows that it may be a problem with the document or the software, macOS Sierra 10.12.
For two printers, it seems that the content of the pages is pushed down as well.
Thank you very much
Ethan
Have you looked for a new driver for your printer? Canon are responsible for updating the drivers for their products to ensure that they are compatible with the new operating system
-
On 22 September, I tried in vain to install MacOS 10.12 Sierra. He failed during installation with a message despite the 198 GB available disk space. Today, I tried again, but the Ap store reports that Sierra has been downloaded. If yes how to either delete it or restart the installation process?
Re-download from the purchases in the App Store page.
Maybe you are looking for
-
My Satellite A200 - 1 GB hangs if it remains unused
Hey,. my laptop freezes completely if I let it be used for little more than 1 to 2 hours. Laptop works absolutely perfect as long, I continue to use it for hours... But the moment I leave unused for about 1 to 2 hours.It freezes completely. None of t
-
Satellite M40X-189: screen seems crushed
I used the function SPACEBAR keys to zoom on a screen that had very small print. When I did it again to return to the initial display, it didn't quite back to normal - each screen now seems a little overwritten, which means that different and slightl
-
HelloI have a user who has received a record of archive Lotus notes in his file to User\username\Appdata.Due to some other issues, we have rebuilt his profile and archive this folder disappeared. Is there a tool or a way to recover its APPData folde
-
5 Udates of Windows cannot install KB2541763 KB2533623 KB2555917 KB32532531 KB2507938
Above the microsoft updates will not be installed. I keep getting "the installer has stopped working and was closed". The error code is always 8024000. This has happened since early June 2011. Downloaded FixIt... no change. I no longer have the
-
Out of nowhere, the box asking if I want to use browsing claret comes up. Even when I say I don't want that, she continues to appear. Finally, he is on his own and began repeatedly typing a letter and I can't do anything except turn my computer. Is t