S1800-314 stops

Similar Questions

• Toshiba Satellite S1800-314 need help!

  I want my my laptop Toshiba Satellite S1800-314 intel celeron 1.10 GHz, RAM 240 MB (2 SLOTS), disk 14 G, CD-ROM 24 X, with 512 MB of RAM, disk HARD 60 or 80 G and DUAL(ALL INTERNAL) DVD-RW.

  IS THIS POSSIBLE?

  [Edited by: admin on 22 March 05 06:58]

  Hi Jim,.

  @RAM: Yes, it is possible to increase the RAM up to 512 MB
  The original RAM Toshiba module with 256 MB will fit without problem (PA3069U - 1 M 25).

  @HDD: I have no experience with a Sat 1800, but must match to a 60 GB! To play safe, you can ask a Service partner or do it on your own risk on!

  @DVD-Writer: I have to disappoint you because the CD player is built in fix! It is only possible to change the disk with a replacement or a DVD/CD-RW Combo drive which is built in the 1800 Sat - 752S!
  In this case send you also a Service partner may be that they have a solution for you!

  Bye Bob

• Satellite S1800-314 is slow if a USB device is connected

  I have a Satellite S1800-314 but its slow when I have stuff USB conect as dougle wireless or USB HDD and

  I am running Windows XP PRO 2002 SP2
  Is there anything I can do to make it faster?

  Hello

  In your case I would first update the chipset drivers. You can find it on the Toshiba site in * Archives *. In addition, you can update the BIOS too. Maybe this solves the problem with USB devices.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  There are many things you can do to make Windows XP faster. Search Google for it and you'll find enough.
  Here are some examples of how you can do it faster: starting disable programs in msconfig, disable services that you n t need, defragment your disk at any time and so far.

  Welcome them

• Need driver graphics for Satellite S1800-314

  Hey

  I installed new windows on my s1800 but can not find the drivers for the graphics card, I tried google search but those I find dosent work

  Help, please

  Why use Google? For me is logical to search for the drivers on the laptop manufacturing rs support and download page. What do you think?

  Maybe you should try to do the same thing. Please by http://eu.computers.toshiba-europe.com start > support & downloads.
  If you need more assistance please post again.

• Ready NAS 314 stops at "boot".

  Hello

  today I updated the FM at 6.4, which worked well, I think. Then I tried to install the Wiki (App). Does the NAS from the browser unaccessable (files were still more or less accessible).

  Then I tried to restart it and it stopped during starting, saying "boot" and the PowerLED flashes.

  I tried to reinstall the operating system, but it always stops during startup.

  Any ideas I can try? I will now check the discs and hard drives.

  Is it possible to do a factory returns without records and without losing data?

  I have 4x2TB disks, how I save them?

  Thanks a lot for your suggestions!

  Philipp

  Thanks for your response!

  Now I have solved the problem, use a monitor to the NAS and typing credentials in linux seemed to have helped the NAS. Now he is well again.

  Yes I can confirm the order in which it happened as you described.

  Best wishes

  Philipp

• AC adapter PA3283U-1ACA and Satellite 1800-314

  A model of PA3283U-1ACA AC adapter is for use with a laptop S1800-314?
  Bo Sonn

  Hello

  I searched a bit on the internet and discovered the following models ca to be used with a Satellite 1800

  PA3048E-1ACA 15V 4A
  PA3083E-1ACA 15V 5A
  PA3092U-1ACA 15V 4A

  Goodbye, Meier

• Card PCMCIA Satellite S1800 CAP is missing

  Help, please!
  After the purchase of a used Satellite S1800-314 (it works well), I wanted to connect into my card PCMCIA network RJ 45. But this was not possible. On the outside, it looks OK, but there is no cap on the inside.
  So please, what should I do to make this work?

  you mean that there are no pins inside? You can get it fixed if you want, but ask first in the store where you bought the lappie, what happened to the pins.

• Identification of compatible optical drives for Satellite 1800

  Hello

  I want to upgrade the optical drive on my laptop Toshiba S1800-314, which is about 10 years old.
  When I had installed is the original - a CD Teac CD-224th.

  However, it is the first time I upgraded to an optical drive, and I don't know how I should go about identifying the compatible players and I can't find anything useful on the Internet. Can someone advise me?

  There are a variety of optical drives listed in my manual that were mounted in the S1800 series and I guess that's not compatible, but I can't see them having a higher yield compared to discs later.

  Any help would be appreciated.

  Ant

  > There are a range of optical drives listed in my manual that were mounted in the S1800 series and I guess that's not compatible, but I can't see them having a higher yield compared to discs later.

  You're right, that you will not get performance gain after update ODD (optical disc).
  I m not very well why you want to add new ODD, but to my eyes, this replacement is unnecessary.

• Satellite S1800-921: USB - high tone sound appears

  Hello

  I have a Toshiba Satellite S1800-921 laptop.

  Whenever I plug a device into one of the USB ports, this high pitch noise appears.

  Then when I unplug a USB device, the noise disappears.

  The noise is coming from the back of the laptop where are USB ports. The noise is very annoying because it's high ground.

  I disabled the Ali PCI to device host controller USB in the Device Manager in Windows XP and which seems to stop the noise, but then I can't use all USB devices.

  Someone has encountered this problem before and nobody knows a solution?

  Any information would be most appreciated.

  Thank you very much

  Andrew

  Hello

  The noise does not appear if the USB devices are connected.
  Well, I never heard talk about this show.
  I know some different USB problem, but nothing on a high sound.

  However maybe a Microsoft Update will change something.
  Please consult this document:
  http://support.Microsoft.com/?kbid=822603

• Update the BIOS on a Satellite 1800-314

  Hello

  I have an old Satellite 1800-314 and I want an update of the BIOS. I did an update of the BIOS on my desk, but never on a laptop. Is there someone who could help me with a manual or something else?

  Hi Antoni,

  I also have a Sat 1800-314 and I could explain how to upgrade a BIOS.

  The first step is to find your current version of the BIOS (in the HWsetup or look you in the BIOS, after turning on the power button, press and hold ESC and you will enter the BIOS), then the next step, go to the Toshiba site http://eu.computers.toshiba-europe.com, then click on support & downloads and go to the support home page and look if there is available as your latest BIOS version and download it.

  If the preparation is done and you have to extract the zip file containing the upgrade of the BIOS on a 1.44 MB formatted floppy. Make sure that the PC is connected to the power adapter. Stop, and then turn on the PC. Press and hold the button depending on the layout of the keyboard is located right between the keys Alt Gr and INS pushed until a beep sounds and the message "ready for the update of the BIOS. Place the BIOS update floppy in the drive and press any key when you are ready to move forward,"will be displayed.

  Place the floppy disk containing the BIOS upgrade in the floppy drive and press a key. FDD access will begin. When you're prompted by the message: "Please push the RESET switch (or turn the AC OFF power off / WE) to restart", remove the disk and turn off the system and turn it on again to restart the PC.

  BEWARE: Info-BIOS-Ce is only for a SATELLITE 1800 314!

  I found this Information on the following site http://eu.computers.toshiba-europe.com when you go to the Support home page and click on the Knowledge Base. You will find a very good FAQ of the BIOS that contains all the various procedures of BIOS for Toshiba laptops.

  Rudi Bye

• Satellite S1800 100: startup problem

  I have a laptop 100 S1800 as a second machine and have recently experienced problems at startup. Food, power & battery LED turns on but nothing happens, no power at all. I have to keep on and off until this finally that she comes to life. Sometimes on stop, he made a series of beeps before stopping.

  Hope that makes sense for someone that I'm stumped.

  See you soon

  Hello

  Perhaps there is only one small problem with the power button, but due the beeps it can also be a major hardware failure. In any case, you should take the machine at the service.

  Good bye

• Utility Satellite 1800-314 installation material

  I have a portable Satellite 1800-314. Some "distributor" has installed Windows XP Professional on, but it seems that he "forgot" to install the Toshiba Utilities.
  Because of intractable suspend and wake-up problems, the client came to me and I do not find anything Toshiba utility.
  The problem: sometimes the laptop suddenly stops working, the fan blows very strong windows unresponsive, turn laptop off with the powerbutton, but then you start over. Sometimes when you are lucky, it starts.
  This problem sometimes also occur when the laptop is in mode 'sleep'.
  I have already installed the powermanagement Toshiba but
  I need to check the BIOS, only the Toshiba HW utility is not installed. I searched on the Toshiba site but I can not find this program for this laptop. Can someone help me?

  Thank you very much.

  STAF

  To access bios, you will need to press ESC at startup. Then, the computer will display "control system. Press '.» Press F1 and the configuration of the system starts.

  BR
  Michael

• Satellite 1800-314: when I close the lid it won't go in standby mode

  I hope someone can help.
  I recently had my Satellite 1800-314 (Windows XP) re-formatted and now when I close the lid he's going to sleep... the power light flashes orange, when I opened the lid still once, Windows stops and then restarts. I tried to install the Toshiba power settings, defining "when I close the lid, in standby mode", does not.

  Have uninstalled then Toshiba power settings and all the settings of ordinary power in the Panel of 'sleep', etc., but it REST did not return to standby mode.
  I'm tired now.
  Is there a simple solution that I'm missing?

  Grateful in advance for any help!

  Hello

  You know it's very important to install drivers in the correct order.
  The installation of common modules at the beginning is important because some drivers of Tosh need this application to work properly.
  If the energy saver has been installed on the operating system windows power settings will not work.
  Toshiba crash parameters the parameters of Microsoft.

  In addition, please check your BIOS preinstalled. Compare the version with the BIOS on the page. If your uses of the unit the old version, so try to update.
  But be careful. You must use the good BIOS and the right procedure upgrades.

• How are apps started/stopped the shell?

  Howdy, I'm running a readynas 314 with the latest OS 6.5.1 and I wondered how the apps that I've installed are started and stopped through the command line (shell). They are all systemctl 'under the hood '? How are apps launched automatically at startup?

  It is beneficial for the RN314. At this stage, we would expect to be available on the server of update week.

• Pavilion 500-314: Reinstall not destructive

  I am trying to perform a non-destructive reinstall of Win Home 64 bit on my 500-314 Pavilion 8.1.

  Since HP does not provide Windows installation floppies, and this procedure can be done recovery disc, I did a USB bootable Microsoft support Web site.

  The problem is that, once started, it tends to cling on one screen. I had the process works correctly once but be cause that I stupidly tried to do something else at the same time, I had to take off to the resettlement. Since I had to restart, I have not the option reinstall back screen.  Now when I start again from the USB key, reinstall it starts but clings to the screen "Ensuring you are ready to install" instead of the option on which screen reinstall to perform. I tried waiting for that step to continue, but after 6 hours, I decided it was certainly stuck (it happened several times). I tried several reboots, but that doesn't seem to help. It gets to the screen of tht and then stops.

  I ran the installer as an administrator, so this isn't it. I made the media twice so this isn't it.  Any ideas why installation does not now (same thoough it once)?

  PS no, I buy the installation diskettes not factory win 8.1, since I will be upgrading to Windows 10 once the bugs are developed in a few months.

  You are of course, right, on the difference between a repair installation and update - and I wish MS had done it much clearer to people because their general information leads people to assume these are the same, and when they do a refresh and lose their applications, they are very angry!

  ========================================================================
  If you feel that my suggestions helped you, please click on the Thumbs-Up symbol; If they helped to solve your problem, please click "accept as a Solution.
  
  I'm a volunteer and I do not work for, or represent, HP.