S20 and CPUID HWMonitor tensions

Similar Questions

• Camileo S20 - How to display the date and time

  Hi, all. I got as Christmas present the Camileo S20, and I am not able to view the date and time in the video. In the manual is no reference on this subject, only how to set the date and time. But what is the intention to set the date and time in the camera, if it is not possible to display video?

  Hello

  Have you checked the user manual of your TV cam?

  If it of possible to display the data and the time you can find in your user manual how to do this. It always interesting to read ;) s

• Aspire MP3800 overheats during games and stop of monitor only downwards

  Hello. Recently, our office has begun closing the screen while playing games (especially the new graphic high through Steam or even Facebook). The system itself seems to remain on (only stops the screen itself) but you'll have to retart everything to get it to turn back the computer. I ran one of these programs to monitor (CPUID HWMonitor) and showed some temperatures increased enough high immediately after I restarted and checked. For example the CPUID, the TMPIN0 varied from 51degreesC to 65, while the Core #0 (under Intel Core 2 Quad Q8300) varied from 36 c (current) to 56 C.

  I am not that savvy with terms, but the fan in the middle of the PC's.

  Note: Recently it was not all games, but it will turn off the monitor shortly after I restarted the computer. There are also the odd occaiosn where he first close the monitor and then decides to restart the PC itself.)

  All of the suggestions. (Because I had problems with the monitor, I recently deleted the grahics drivers and reinstalled, but it made no difference).

  If the moniter does not work as it uses both for a new

• I'm seting up a new system and trying to do a fresh Windows XP install on hard drive clean.

  However, when it will install the files it's about 50% and it goes to a blue screen saying IRQL_NOT_LESS_OR_EQUAL.
  My motherboard is ASUS M4A88T-V EVO. Pls Help

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect the other internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers brand and model, try "Speccy", provides information system/computer in detail
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Once Windows is installed:

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?
  Check their support site for the latest drivers as the CD that came with the computer
  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card: download and install the most recent Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the option 'stress test' for 4 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.cpuid.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
  and the "SPD" tab shows the nominal speeds for each memory location that is filled.
  #2 Note:
  COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• Very slow - Window 7, 266 mHz i7, Geforce 9800 GTx graphics card - computer was reformat hard drive, reloaded windows 7 and without other installed programs/games.

  My computer is running very slowly - i7 (quad) 266 Mhz and Geforce 9800 GTX graphics card.  I had this computer for about a year.  The problems seemed to start about 3 months when I started to play a game - Empire Total war with Steam.  The computer ran more slow and more slowly, gradually.  I tried all the clean disk, speed up programs, he worked once for a few days and then become very slow.  Finally, I backed up my files and reformat the hard drive and reloaded windows 7.  My computer has nothing loaded except windows 7 and is always very slow! Hardware issues? Help, please.

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are OverClocking or use an automatic overclocking or BIOS features, energy saving
  Start by disabling: Intel EIST, Turbo Mode, Cool and pretty
  and fall at the speed of stock as a starting point.

  Disconnect the other internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs (memory and SPD) that indicates the actual speed of the memory and 'SPD' tab displays the nominal speeds
  for each memory location is full.
  #2 Note:
  COMPARE the two values, the actual speed should not exceed the rated speed of your memory.

  Prime95: Displays your actual speed of the processor when using CPU ID under a heavy load.
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 3 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD, you can expect a temperature range of
  35 to 40 ° C at idle and 60-65 c max when running Prime95.
  http://www.alcpu.com/CoreTemp/

  -----------------------------------------------------------------------

  Also: Try running Memtest86 +: it runs from a floppy disk or CD, you must remove or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test - CD Bootable:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Once Windows is installed:

  Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
  Check their support site for the latest drivers as the CD that came with the motherboard may have
  older less stable drivers.

  Visit the download of the manufacture of the graphics card: download and install the most recent Windows 7 drivers
  for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  http://www.partitionwizard.com/bootable-Flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  Hiren BootCD
  http://www.Hiren.info/pages/Bootcd
  Hiren BootCD from USB (USB key)
  http://www.Hiren.info/pages/Bootcd-on-USB-disk
  (something more questions)

  UBCD4Win:
  http://www.UBCD4Win.com/index.htm
  UBCD4Win is a recovery CD bootable that contains software used for repairing,
  restoration or diagnose almost any computer problem.

  MyEventViewer - an easy way to display your event logs:
  http://www.NirSoft.NET/utils/my_event_viewer.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• New Dell XPS 8700 overheating and shutdown itself

  I bought my new XPS 8700 4 days there and that's the first problem, my pc is overheating and I don't know why, I have it on my desk so no dust can damage as it have enough space around fans.

  The problem is that the pc is overheating even when I do nothing, its just to put on a few sites and after some while pc crashes: the screen goes all black. The last time it happened I had the only song on YouTube and I was typing on Facebook, when suddenly the screen goes black and pc closed down, ive checked CPUID HWMonitor where I discovered that my graphics card is approximately 70-85 ° C.

  Second crash is almost the same as the first, but with this difference that the pc remains powered on and just monitor the message "entering power saving mode" and can not be awake so I have to hold the start for 10 sec button to restart my PC. Im a little scared because I am sure that it will not be caused by any software just because the computer is 4 days old and I has not yet opened the case (im not sure if I can just because of the warranty)... What should I do? It is necessary to call Dell technical support or I can solve it it somehow better?

  My PC specs:

  Intel Core i7 4770 Haswell, 16 GB RAM, AMD Radeon R9 270 2 GB, SSD 32 GB + drive HARD 2000 GB 7.2 k, 8.1 Windows Pro 64 - bit

  Sorry to hear that!

  If it is only a few days old, contact Dell Tech Support as soon as POSSIBLE. In the United States, you have 21 days from the date of billing (no delivery date) to request a replacement. Then contact them immediately if you want to have it replaced. Otherwise, arrange for Dell fix this one, if all goes well in your premises...

  BTW: Open the case do not void the warranty.  But if you replace all of the equipment installed at the factory, Dell may ask you to reinstall the original parts, before they honor the warranty.

  I hope that get you it fixed quickly!

• Is Camileo S20 - possible to turn off the screen?

  Is it possible to turn off the screen when you use modes Time Lapse or motion detection to save energy?

  Hey Buddy,

  I downloaded the manual to the user off Camileo S20 and searched a little, but unfortunately I can't find any information about turning off the screen when you use Time Lapse or motion detection. It seems that the screen is always enabled.

  But you can connect the AC adapter when recording movies. If you still have the power. :)

• Playback jerky with the Camileo S20

  Hi all, I just bought a Camileo S20, and I'm having a problem playing anything on my PC.

  Read VERY jerky avi files. They play very well on the display units.

  I tried several (all microSD + adapter I might add) memory cards, different adapters and different software in order to read them.

  A card especially wouldn't even format it in the camera but worked fine on the PC!

  Do I need a Ultra card designed for the video or just a standard SD card not microSD.

  HELLLPPPP!

  Post edited by: Broomgrove

  Movies recorded on the internal memory also the choppy playback.

  What is a defective unit?

  Hello Broomgrove,

  How you copy the files to the pc?
  You inserted the sd card into your pc?
  Have you tried using the usb cable?

  Maybe your pc card drive took place on this subject?

  BR

• How to use the external power supply on Camileo s20

  How the external power is connected to S20 and registration is possible at the same time. When the USB is plugged into my camera it will not turn on.

  1. open the battery cover
  2. remove the battery
  3 connect the usb power cable

  Now you can use S20 with external power without draining the battery.

  Crazy but true...

• Camileo S20 or: 30 help me choose!

  (I am Dutch but I speak a little English, I try;) (D)

  I can't choose: S20 or: 30
  It's for youtube: shooting, vlogs, videos amateur, indoor and outdoor.
  What device is best?
  and which are not so good things the S20 and the: 30.

  For 6 months I Camelio: 30 and I m satisfied with it. It is not too big, and I can take it anywhere. I use it with 4 GB SD card. Recorded material is OK especially when I record something on the outside and by the light of the day.
  When there is not enough light video is not the best but even is on other devices too.

  So I think that for the price this is good product.

• Camileo s20 very low sound recording

  Hello people

  Yesterday I bought a Toshiba Camileo s20, and I face the following 'problem '.

  When someone speaks in a standing position two or three feet from the camera, his voice is too low.

  They must be medium close to the entire camera/microphone (or be talking/shouting very loud) for their voices to be recorded to loud and clear.

  This is how work the Camileo cameras, or is it possible that I had a defective? Any way I could solve the problem?

  Thank you in advance.

  Post edited by: frederique

  Hello

  I have a Camielo: 30 and my camcorder does not support a special microphone settings.
  You can increase or decrease the sound but I do not know if this option would amend the volume mic too m.
  You can test it, but if this will not help increase the microphone volume so I guess there is no other option that could change that.

• Failed to load USB Camileo S20

  Hi all

  Ask advice available.

  I just bought the Camileo S20 and note that the camcorder can not loaded via the supplied USB cable.

  All I get is a constant blue light (indicating that it is fully charged), even if it is not.

  If I plug through feeding, loading starts and a blinking light appears.

  It's strange that I went through the manual and it says that the load can be done via USB or AC charger.

  I tried to plug in the USB cable using a PC, Mac and even thanks to a USB power adapter, but all I get is a constant blue light.

  What's wrong?

  > If I plug through feeding, loading starts and a blinking light appears.
  Hello

  I have a Camileo H30 and if I connect the camcorder to the laptop using the USB cable from the play button flashes green.
  But if I connect the power adapter to the camcorder, then the photo/camcorder button flashes red and blue.
  This means that the battery s camcorder correctly charges.

• process model: include PreUUT and PostUUT step translates report

  Hello everyone,

  Little background:

  My test team has 4 writing code developer for 4 different components. The endurance test, we have common requirements as variable input voltage and of the temperature. Instead of using the common installation model, we prefer to use PreUUT of TestStand process model element. This helps each of follow us strict coding style.

  Problem:

  There are many examples to record the results of PreUUT and PostUUT in the report. However, all of these examples require change in file client sequence. How to implement this feature in the process template itself? So that developers do not have to ModelCallback process or use patterns in their code and still the tension updated the and temperature in ProcessModel could be connected to the report.

  Ah yes, I use TestStand 2013 (4.1)

  Concerning

  Benjamin

  Thank you, Julian.

  Some of your other posts has helped me solve the problem of the PreUUT. I don't know if this is the correct method, but it works very well for me.

  Did the following:

  1. in the ProcessModel activated sequence result record for any stage in PreUUT sous-séquence.

  2. in PreUUT sous-suite added after declaration-

  "" 'RunState.ProcessModelClient.Data.Seq ["MainSequence']." Locals.ResultList = Locals.ResultList

  And voila, I PreUUT step results in my report. I would like to have feedback on your part. Is this a good method? do you see any risk?

  The next challenge online is now to log PostUUT results in the report.

  Kind regards

  Benjamin

• DAQ read and write synchronization

  I would like to acquire the data permanently (I) and sometimes write data (AO).

  Currently I have a Subvi permanently this bed to 125kHz. The data is passed to a queue. Another Subvi accepts a user input and provides output tension affecting playback. I traced reading and voltage on a chart. I noticed that over time, the input and output lose alignment. Initially, it is +/-10 ms and then past at 100 + ms - as the control voltage above reading expected by 100 m I switch the control voltage to the Subvi acquisition via a global variable and insert it into a table with playback.

  I am sure that is not the way to do it, but I can't see how trigger can help me here, given that the reading should be continuous. I just need to align the output to the input of my land.

  I solved the task:

  I put a VI "get the date and time" in a structure to deal with the writing of data acquisition. Then, I used the wave function of build and wired an array of unique value (the value of the AO) with the time stamp (to). So instead of using a waveform graph, I used a XY Chart and traced this waveform, but also the waveform of analog input (combined in a table). So if I send a voltage pulse at time t = 100 ms, I see an increase at t = 100 +/-1 m higher, I see the rise at t = 100 + dt ms (dt ~ 10 to 100), because the data was drawn from the buffer too slowly.

  Since I am acquiring data at all times, regardless of the result, triggering is not really useful here.

• entry with DAQmx and simple analog output

  Hi guys,.

  I did a vi that is supposed to a tension (and current), read and write a tension (and current).

  Write processes both read the process works perfectly when activate them separately.

  But I can't activate reading while I am writing the process is running.

  I think that there is something wrong in my vi.

  Is there anyone can understand what is happening?

  I solved this problem by myself. It's because I put two loops (process of writing and reading process) case in a while loop. The while loop does not run until all the ends of loop case, which has made, I can only write or read.

  To resolve this problem, I can either put the case loops in different loops or use while structure slave master.