S205 EasyCamera Question

Hello everyone.

I am currently facing EasyCamera problem. I installed the driver for the camera on my Lenovo S205 (Windows XP Home SP3) and it works fine. Ditto on http://www.testmycam.com: camera work.

The only problem I have is that in EasyCamera SW it shows nothing other than a gray screen. Please, you have an idea how to solve this problem?

Uh, still does not. Nevermind, I give up. I think I can live without it.

Tags: Lenovo Notebooks

Similar Questions

  • IdeaPad S205 RAM/memory: maximum speed?

    Hello

    Lenovo customer service/tech support I asked this question several times, each to give me an answer to 1066 mhz.

    What is the maximum SPEED for the RAM/memory usable by the S205 with AMD Fusion the E450 processor?

    I understand 8G (2 slots of 4G) is the maximum capacity of ram.

    But what is the maximum speed of the ram? I thought that the maximum allowance is 1 066 mhz due to the site, despite the AMD website, saying that the E450 can manage 1333 mhz.

    Obviously, I want to max out my RAM. I went on the site of Kingston and used the option to locate specific RAM for this device and it gave rise to 1 066 mhz 2X4G sticks. So I bought and it just. I just want to come here and see if someone actually KNOWS what as the maximum speed capability (or anything else I should be aware of outside Gig capacity) which can take the S205 with AMD Fusion the E450.

    EDIT:
    In new research, I found the following.

    (1) according to the support of crucial technology, the RAM frequency/speed is controlled by the processor CPU only. And as said by him, the AMD 300 and 350 have a maximum speed of control for the RAM of 1066 mhz. However the E450 has a 'controller memory integrated (up to 1333 MHz) DDR3"as seen go ( http://www.lenovo.com/shop/americas/content/pdf/system_data/s205_tech_specs.pdf ).

    Also note that just below him, he goes on to say that the maximum speed for RAM is at 1066 mhz. Therefore, this disturbs more the issue. It seems to me that, when they are max memory capacity and speed, they forgot that the E450 can manage more of the E300 and E350 and simply serve their maximum speed of 1066.

    I already went ahead and bought 2X4G 1066 RAM. Fortunately, I did not open them. But now it comes to ship to the company and having to order the good 1333 mhz RAM. Otherwise I use RAM that is slower than my full potential.

    I advanced and called Lenovo and it brought to their attention. After the daughter of back and forth between 1066 and 1333, she decided at the end (of course assistance from their technical support level 2) 1333 is maximum for E450.

    Conclusion:
    It seems that if you have E450, you may have to 1333.

    If you have E300 or 350, you can have 1066.

    If anyone has confirmation, please tell.

    If you go to the Lenovo support site and enter the serial number of your S205, if will give you a list of all the machine components (including the RAM module manufacturer, size, speed, etc.).

    The manual indicates that the specification of RAM for my S205 1066.  By entering my serial number, I found that Lenovo had actually installed 1333 RAM in my system.  Then, when I added more RAM, I knew to add 1333 instead of 1066.

    No, I didn't bother to check my actual speed of the RAM.

  • [s205] How to install Win7 x 64 from scratch on a new hard drive?

    Hello

    I have a little problem to solve...

    I own a s205. My hard drive died. I replaced it with a new one. After that, I tried to install Win7 x 64. When installing, it created 2 small partitions. It was strange to me, I saw him for the first time. Later, I read that it is because of the UEFI.

    In any case, installed all good, but after installing the drivers, I have encountered some problems. Or net card worked. I started looking for information and I know that the problem is UEFI.

    My question - can someone write a guide how to install Win7 x 64 on s205 in traditional mode, so everything should work as before? Unfortunately I didn't save the DVD or any other source of images of Lenovos.

    Kind regards

    Daniel


  • Camera S205 problem

    Have a S205 (win 7) a couple of days, but can't get the webcam to work.

    None of the software like Youcam/Skype/Lenovo Veriface etc. find the camera.

    I can turn the camera using Fn/Esc and when I do, it appears / disappears as it should be in "Device Manager".

    There is no application running in the Task Manager.

    There is another user of the forum, with camera problems too, but the problem, it seems to be "unknown harware.

    My gear seems fine in the Panel and indicates "Lenovo Easycam" works very well.

    Any ideas?

    Thanks, I forgot to add that I had already tried "testmycam" and only got a black one 'square '.

    In any case, I gave up and doesn't have a factory restored and all is well now.

  • iOS 10 people record problem/question

    Hello

    I have a couple of "faces" in the issue of people who are coming in white, but acknowledged same 'face' of many times.  Is anyway to update it for photo comes actually?  At a few faces, I don't know that facial recognition found since it is coming from white.

    Hi JohnP007,

    Congratulations on your iPhone 7 more running iOS 10! I understand that some of your faces in the album of people pull up as a draft and you want to refresh. You can try to use the steps below to fix the faces on the thumbnails in albums.

    Difficulty faces and names mixed-up

    If you notice that there is a photo of someone in a collection that is poorly identified, you can remove it.

    1. Tap the person you want to remove in the album of people > select.
    2. Type Show done face to emphasize his face in every photo.
    3. Press on each photo that is not the person.
    4. Type > not this person.

    Hide people

    You can hide the people or groups that you don't want in your album of people.

    1. Open the album people and press Select.
    2. Touch the people you don't want to see.
    3. Click Hide.

    If you want to see the people that you have hidden, press on show hidden people.

    People in the Photos on your iPhone, iPad or iPod touch

    This should be corrected without delay faces. Please use the Apple Support communities to post your question. Good day.

  • Questions - and answers forgotten

    How to get my 'secret' answers to the questions that I have noted the way back when?

    If you forgot the answers to your questions of security of Apple ID - Apple Support

  • I can't reset the security questions. We received notice as below:

    Hello world

    I can't reset the security questions. We received notice as below:

    "Cannot reset Security Questions."

    We have insufficient information to reset your security questions. "

    Please help me as soon as possible! Thank you very much.

    Hello

    You will need to contact the Apple Support.

    The information is available here:

    Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

    (I'm afraid that no one here can solve the problem for you - this is a user-based community).

  • Question of cloning for SSD upgrade on 12 Macbook Pro

    Previously, I did an upgrade to SSD on my Macbook Air to 2012 according to the instructions of JetDrive transcend. Basically connection via USB 3 and using Mac OS X to clear (and format) disc utilities new SSD, then restore again SSD and then remove the original 128 GB SSD and insert the new 480 GB SSD.  For about a month and so far without problem.

    Now I'm trying to 2012 Macbook upgrade my Pro partner (on 10.11.6).  I got a Crucial SSD MX300 to replace his HARD drive.  Crucial comes with (or recommend) Acronis software.  And a lot of the messages of the forum recommend Carbon Copy Clone.

    My question is if I can use the same method for the cloning of the HD as my Macbook Air (just restore disk of Mac OS X utilities)?  This time, I'm upgrading HARD drive and I don't know if something is different.  At the same time, if I got lucky the first time, I don't not ruin Macbook Pro my spouse this time.

    Thank you.

    Yes, you can use disk utility to clone your MBP wives, but unlike CCC, it will not clone the recovery and Partition.

  • Question about resolution movie downloads

    If I buy a movie at a certain resolution (780p for example), but I want more later re - download at a higher or lower resolution (SD or 1080 p), can I do so and how?

    Same question perhaps for music. Some of my songs have been bought before the latest Apple codecs.

    Any help is appreciated!

    THX!

    Once you have made a purchase on the iTunes store, you will see your purchased items in the menu under accounts bar > bought. You can simply select the item purchased and re-upload.

    With regard to the resolution of the film for films that are offered, and you select the resolution, you can download it again and select a different resolution. For movies that are available as separate download to SD, 780, or 1080 points, you would be limited to the original resolution you selected.

  • Why I can't ask questions.

    I just have a question.  I said that I can't ask questions.

    Do exactly what you did to make this post, but your question in there instead.

  • Cannot reset the Security Questions

    Hello my dear

    -J' forgot my account security questions, but I remember password

    And I'm changing my Security Questions, but show me this sentence

    "Cannot reset Security Questions."

    We have insufficient information to reset your security questions. "

    -I want to solve this problem as soon as possible if permitted

    You should contact the account of Apple security team. To join, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

    (145081)

  • Bootcamp Windows 10 question

    Hi all

    Stumbled upon a problem, try to install Windows 10 an end 2014 27' iMac w/retina education runs Yosemite 10.10.5. Bootcamp is V 5.1.4. 32 GB, 3.5 ghz Intel I5. Disk of 1 TB of Fusion. Before you try this, I read the guide of Bootcamp to install windows, but also a number of other tutorials and forum messages about potential problems. This research, I learned that for EDU edition you must change the name of the file from Win10_1607_Education_English_x64.iso to Win10_1607_English_x64.iso. Apparently to have the former name of the file may cause OS X to not recognize the ISO. That fact I started Bootcamp, waited while the software downloaded and created a bootable USB key and partitioned my drive giving Windows 70 GB of space. After that, I got the message that my computer is restarts. Upon restarting, I got the black screen with the blue Windows logo and a spinning loading animation. After a few minutes, a blue screen with a message "Windows has encountered and error with computer and must restart," or something similar. He was pretty quick, so maybe it's not word for Word, but it was not a helpful post in terms of saying something specific. When the computer reboots, I am sent directly to OS X, though a bit slower than normal. I tried to restart with the flash drive to see if the installer would start up, no dice. Try now the Option key at startup, the flash player is not available. Went into my settings to see if I could change my startup on Win disk install USB, no luck it no more.

    Now for the question: How can I get the Windows installation again? What I have to start the process, and if so, what should I use Bootcamp to delete the partition that was created? I have re-run Bootcamp and the only option that is checked is the partition and start and install/uninstall windows and delete the partition.

    Thanks for the help.

    Perform the following two procedures

    Reset the management system (SCM) controller on your Mac - Apple Support

    How to reset the NVRAM on your Mac - Apple Support

    If you use a USB drive, not a USB flash drive, you will have problems. It is recommended to use a 8-16 GB USB2 flash drive.

    If the installation program is located on a USB Flash drive, stop your Mac, connect the USB key, restart and hold down the alt/option key and select the Windows icon in the USB port. This installs Windows in BIOS mode. If you click the start EFI icon, it will install using the EFI mode (faster). You may need to change the partition from MBR to GPT using GPT Fdisk.

  • Yahoo account question

    Yes, I understand these are the Apple support forums, but I don't know where else to ask this question and I thought some of you would have the answer to this question.

    I deleted my Yahoo account last week, but I've heard that the 500 million Yahoo accounts were hacked in 2014. I made my account in 2015. Im sure it is hacked since I made my account a year after the supposed hack, but if my account has been hacked and I deleted which would be safe?

    If your account did not exist in 2014, then it is has not been hacked. Removal of the guarantees it will not be new since there was more pirate. Normally, at least the hackers got access to more information in the narrative, as credit card numbers, change your Yahoo password would have sufficed.

  • Text backup question / deleted

    I accidentally deleted one of my iPhone SMS 6 Plus.  They always show on my iMac and iPad but I fear when an AutoSave occurs, it will back up the iPhone and remove them to two other devices. What will happen?  I use iCloud if that makes a difference.

    Hi melissahh625,

    I understand that you have questions about your messages deleted on different devices. I know that it is important to have a handle on your data, so I'm happy to help you.

    When you receive messages, they are stored on different devices. This means that when you delete a device they will not be deleted on the other. This is the case, even if one of your backup devices to iCloud that these backups are specific to devices, as well.

    Thank you for using communities Support from Apple. See you soon!

  • Question

    Look I went to a new site called collabmix.com, and in any case I tried one of my samples Logic Pro download for someone else to try to collaborate with and help me through my song production. In any case when I go to download, the site accepts only gif, jpg, jpeg, or png. How to record my song pro logic and make a jpeg or jpg file? Please someone... IM new to this site and maybe someone asked this already so I'm sorry if this is a redundant question. Anyway ill be looking for a response from the community here. Thank you

    GIF, jpg, jpeg, or png are all formats of image, audio files or formats of logic.

    I got a peek on the site but I'm not register. I'm going to guess and say you are in the wrong place to download your song.

Maybe you are looking for

  • How can I change the spelling in English only on outlook express

    computer is Windows xp using outlook express for e-mail

  • Rocket + gel and nothing works

    I recently bought the Fuze + (Black 8GB) Saturday, seeing that my old (Silver 8 GB Sansa Fuze) was a Creek screen and doesn't turn on once I did 30 seconds to hold the power button and then hit the play button later. My mother took me to Best Buy and

  • HP Officejet 7612 pilot error issues.

    I recently bought a HP Officejet 7612 all-in-one printer and it connects to my wireless network and when plugged directly into the computer with a USB cable, the computer recognizes it as a 7610 and then windows search for drivers, unless a driver is

  • AnyConnect trouble Windows7

    Hello I'm having a lot of trouble getting Anyconnect, make a connection to a Win7 machine. Installation went well and after pressing the button to connect, the client tries to connect, but after a while, I get the following messages: -Set up VPN - ac

  • 1213nf firmware update

    Recently, I received a mail (HPSBPI02851 SSRT101078 rev.1 - some HP LaserJet Pro printer, access unauthorized data (c03684...) and downloaded the update of the firmware.) However, at the time of the installation of the firmware, software hanged and w