S430 battery after use

Similar Questions

• RILD eats the battery after using my music

  Strange coincidence, but both times I had the process rild run amok and obliterate my battery on my Droid4 have been after using the MyMusic player provided by Motorola. Restart the phone (lock + low-flying 10 dry) does not help, power-off-then-on does not help. The only thing that stops rild for me so far is to run the battery at 0% while cooking the entire phone to a bunch of warm pipes until it stops. Recharge and reboot - everything is fine - for a while.

  Sorry to hear that it is happeneing you. We already have a current thread on this issue where Matt from Motorola is involved in this thread.

  I'm closing this thread to keeos organized things.

  You can often find answers and avoid the double post if you use the search at the top of each page.

  here is the link to the current thread.

  Thank you

• data battery iPhone use 6 missing

  I don't know when it started or how long it spent, since it is not a setting that I check very often.

  I have an iPhone 6, iOS 9.3.2.  I just realized that battery usage data are missing completely.  It just says: 'battery information will be available after using the iPhone for a few minutes, and then he simply does not appear.  I turned the phone works a couple of times.   I spent all the apps in use, etc.

  I'm NOT going to reset the device around this issue... I had enough problems with the whole line iPhone 6 (I'm on my third).  I would like just a simple fix... or a way to submit a bug report to Apple.

  Thank you!

  To collect the data of the phone battery must be fully charged and then allowed to run for several hours. Whenever you power it cycle the process starts over. So if you keep the power cycling it you don't you use battery information.

• C855 satellite can not boot from battery after upgrading W8-W10 Home >

  Hi all

  I have a problem really strang after upgrade my C855 Satellite of Windows 8 to 10 of windows. After the upgrade, I can't boot my system of battery only. With the adapter, I had no poblem.

  I bought a new battery, but it still had the same problem. Cannot start system battery only.

  The following steps, I was

  • Got the latest Bios Update
  • Used a new battery
  • Do the powerless laptop (detach battery and adapter) and hold the power button for 15-20 seonds. After that return battery and adapter
  • Do seals in my power, parameters of balanced energy vice versa

  Is there anyone who has had the same problem or can advise me?

  Thanks in advance for the help

  Hi Repairlab

  You are not alone. I currently have a C50 Sat with exactly the same problem, with the exception of the upgrade. My problem started before I upgraded to 10. Like you, I can start with the battery and using taking current, but which is rubbish for a laptop.
  I didn't upgrade the bios but the laptop does not recognize when the battery is connected and the bios update tool continues to ask for it (VERY annoying ToshIba if you already read your forums).
  I was trawl through these forums looking for a solution, but there are 0 replies on the vast majority of positions. Not even ToshIba engineers seem to have a presence.

  In any case, did you ever solved the problem, and if so can you please share?

  Thank you.

• Lenovo S430 battery

  I just followed the advice given on disabling the built-in battery, but, unfortunately, it does not meet my request.

  With my own Z series, I untied the battery and have stored at 30-50% as the operating instructions - every three months, he then reloads 100% and use it until it get back to 30-50%, remove it and store. It works much better for me this way.

  But the wife S430 battery! I can turn off the battery by following the instructions in the manual (and, presumably, re - activate again if necessary!) but nobody knows what Beach for free, it should be disabled in the?

  Also, I assume that the power to 100% and then use until back down for some expenses, that's what I do eery 3 months?

  Thanks for your help.

  Hello

  I also have the s430. Maybe this article can help:

  http://forums.Lenovo.com/T5/welcome-FAQs-Knowledge-Base/How-can-I-increase-battery-life-ThinkPad/TA-...

  I took: beginning at 40% load, stop at 80%

• the share button don't work and need to leave the app after used

  the share button does not work and I need to force quit the app after used

  Any individual plugin or all of them?

• After using groups of tabs earlier today, now whenever I close FF with more than 1 open tab, FF don't ask me to confirm before closing

  After using groups of tabs earlier today, now whenever I close FF with more than 1 open tab, FF don't ask me to confirm prior to closing. FF always asked me to confirm in the past and no settings have been changed before you try tab groups. Then when I open FF it again all the tabs I had open are still there. I tried refreshing FF and erase history, but that did not work. It's almost as if FF think windows and tabs I have open are a group of tabs, and he won't let me get rid of this group. How to stop groups of tabs now that I have them? Or is there something else? None of this was going on until this morning, I played with tab groups. I was curious what it was - it's going to make me kill one of these days lol.

  Note that using "show my windows and tabs from last time" as the start setting will also prevent Firefox to display an alert when you close the window.

  • https://support.Mozilla.org/KB/Options+window+-+General+Panel

• Trackpad unusable after using the Wacom Tablet

  After using my graphics tablet pro Wacom Intros to edit images, the trackpad becomes unusable. Even when not frozen it will not properly work without a reboot. This happens every time, so it becomes a bit of a drag.

  I use an iMac of mid-2011 and OSX 10.11.4.

  Would like to know how this can be corrected.

  Post edited by: added gPhot wacom device description

  The tablet pen and wacom are known causes of interference.   Move them well away from your computer and try again.   With no improvement, move them temporarily out of the room and try again.   You need to establish that it is the culprit.  Once it is proven, you will need to find a way to work the problem goods because you can not blame the system for causes of interference.

• Pro L10: After using a wireless mouse, the touch pad has stopped working

  Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

  I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

  Can you help me?

  Hello

  It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
  I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
  I guess that you are having regular problems with a USB mouse.

• Does not start after using the recovery Toshiba Tecra M5 - disk

  After using the restore on my Tecra M5 CD, the computer cannot even start!

  What to do in this situation?

  Hi jbdoktor,

  Does that mean exactly?
  Now, what happens if you start the computer?

  Sorry, but without this information it is difficult to help you. Maybe you should try the recovery again disk

• Should I update all the files from the Toshiba site after using the recovery CD

  I just used my recovery CD and update the Windows Update System.

  The question is: should I update all files in the files on this site download section as well?

  Usually after using the Toshiba Recovery CD everything should works and works correctly
  To my knowledge from time to time Toshiba has released new version of some tools or drivers. For example the BT stack will be developed all the time.
  But I think that if you have any problems with your system and peripherals, then you don't need t to update anything.
  Small is my opinion...

• Satellite M30x-154 works only with the battery in use

  I own a Satellite M30x 154 and did so for two years. Now the laptop is more fuel with just the battery in use.
  It feeds well with the power adapter and the power indicator shows the batterys is full of 74%.

  Any ideas?

  What to say? The battery is possibly defective. The fact is that M30 x is old enough laptop model. Everything is possible.

  What happens if you start Notepad with AC adapter, then remove the connector ca? Can you use Notepad on only battery power?

• Does anyone know how to change CMOS battery is used in a Compaq 6515 b?

  Does anyone know how to change CMOS battery is used in a Compaq 6515 b?

  Hello

  This is the RTC battery on the book next (page #66):

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c01566982-9.PDF

  Kind regards.

• I closed and put my computer in its case after use. 3 hours later, when I went to use it again once I took the case and it was hot. It's on and he said "your computer was stopped because of a problem. Anyone had this happen?

  I shut down my computer and put it in its case after use. 3 hours later, when I went to use it again once I took the case and it was hot. It's on and he said "your computer was stopped because of a problem. Anyone had this happen?

  No. I have not experienced this before, after having turned off. It seems that your Mac was not completely extinguished before you he packed. Make sure that it is actually stopped before closing the lid.

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.