S50-B-15N satellite screen problem

The laptop above is not completely in three months.

Yesterday when I tried to turn on the laptop the button turns on but the screen remains black. I removed the power wire, closed the laptop and up computing to study under the search for the battery. I then decided to try to start the laptop and the screen came and I worked on the computer without further questions.

However today, when turning on the computer I was again met a black screen. Yet once, I removed the power wire but I had not closed the computer or closed it upward. While driving, the laptop, I noticed the screen come alive.

Now, I found that if I move on the screen, it becomes black or move again and he comes to life, is not serious if I am on mains or battery.

I hope it is a simple solution to avoid having to download and save all the information that I entered on the laptop in the last two months.

Thank you.

As you know on this virtual path, it is not easy to offer a precise diagnosis and it is not easy to tell exactly what is happening. It could be something with cable or connection in general.

In my view there is not much you can do about it. The laptop does not have to be open, so all you can do is to contact the nearest service provider of Toshiba, to explain the situation and ask for help. They should check the display cable and connectors.

Tags: Toshiba

Similar Questions

  • After the last update Windows 10 - Z30 Satellite screen problem - has

    Hello

    After updating Windows 10 (threshold/1115) one of our Z30 - A sometimes wakes up after hibernation with the screen off. The only solution is to turn it off by holding the power and then turning it back on, button which is obviously annoying because open files may be lost or corrupted. The other Z30 - A that you don't show the behavior of sound.

    Someone at - it ideas? I would really appreciate the pointers.

    Thank you very much!

    Kind regards!

    Sounds like a driver problem.

    go to control panel and uninstall different drivers (sound, display, wireless, etc.), then let Windows update install the latest versions.

  • Can not find SSDS in Satellite S50-B-15N

    Hello.

    I just bought a S50-B-15N Satellite, which is supposed to have an 8 GB SSD and a 1 TB drive.

    I can see the hard 1 TB but could not find anything to do with the SSD drive in my computer or in 'manage the device '.

    Anyone got any ideas?

    It seems that the S50-B-15N Satellite was released in the United Kingdom, and according to the website of specification for Toshiba laptop, the laptop was equipped the 1 TB + 8 GB Solid state drive Hybrid (SSHD)
    http://www.Toshiba.co.UK/laptops/sat...ITE-S50-b-15N/

    The hybrid propulsion system (also known as the SSHD) is a physical storage device that combined flash Solid State drive (SSD) of NAND with hard drive (HDD) technology.
    https://en.Wikipedia.org/wiki/Hybrid_drive

  • Satellite S50-B-15N - screen flickers

    Hello!

    I have a http://www.toshiba.co.uk/laptops/sat...ite-s50-b-15n/. Windows 10.

    The screen flickers every morning and every evening (after I come back from work) for about 1 minute, regardless of what I do, that there is normal unless I have push or pull.

    That I can book a Pick Up and return, but there is a tax of 60 books just for the trip if they come to the conclusion that the damage is caused by me. I'm afraid they're going to say that because he has a "hole" in the back of the screen. I know that's not relevant, but of course I can't prove it.

    Video question:
    https://goo.GL/photos/Q2UXDHJw5L2Avbws8

    Photo of the "hole":
    https://goo.GL/photos/oEBH8jcGp8mLTZCq5

    Thank you for reading!

    Sounds like a bad connection of the LCD screen.
    ASP can fix it. I don't think that little tooth is causing the problem, but the ASP would need to open it to see what happens.

  • S50-B-15N issues satellite keyboard/Trackpad / function key - win 10 improvement

    I bought a Satellite S50-B-15N a few months ago, who came with Windows 8.1 and decided to do the upgrade of Windows 10 about two months ago. Initially, the laptop worked well but in recent weeks, he had various issues with the keyboard, trackpad, and function keys.

    Keyboard: Sometimes the laptop starts up and the keyboard detects no input. A few reboots solves the problem. If I hold the BACKSPACE key to delete several characters as a single character is deleted on one-click Rollback, I can't keep him down quickly delete several words.

    Trackpad: The same for the keyboard sometimes at startup it works everything simply. I have to use the keyboard to access devices Manager where I must get back the driver trackpad for her to start working again at the next reboot.

    Function keys: All the keys of the row from the top on the laptop (brightness, volume, stock selection, etc.) do not work. I am able to hold the "FN" key and select an F key, like F5, but other keys are completely insensitive.

    I tried reading the forums for solutions and I went to the page of the driver of Toshiba and installed all the drivers for Windows 10 for my laptop, so far, nothing has worked. Is that what I can do to make the laptop works properly with Windows 10?

    I have a similar problem. I had the same Toshiba model and bought in August. Not sure when the new driver will be released. If anyone has an idea how to solve this problem?

  • Satellite S50-B-15N - keyboard does not work

    Hello

    hope someone can help me here... have a laptop Satellite S50-B-15N, my fixed keyboard keys don't work (in the letter I (outside)...
    which means that I can't type my password and access my laptop...

    I have windows 10 update since it was released...

    Thank you very much
    Rod.

    You are able to use the external USB keyboard properly?

    If so, then the internal keyboard may be defective and must be replaced to solve the problem.

  • Satellite S50-B-15N-Wi-Fi frequent disconnections / BSOD

    Hello

    I have a Toshiba Satellite S50-B-15N who suffers frequent disconnections in my home Wi-Fi.

    I updated my drivers intel for the latest on the site of intel, but the problem persists.

    The other day I got a BSOD and it came with this (NETwbw02.sys) DRIVER_IRQL_NOT_LESS_OR_EQUAL Error info. After a little research, there seems to be a conflict any with the access point (router) in my house.

    I also suffer from BSOD on the incidents of the core power.

    Anyone have any suggestions on any of these questions?

    The NETwbw02.sys file seems to belong to the Intel WiFi driver package.
    But usually the Intel driver shouldn't cause big problems... but it might be possible that a different 3rd party software that is installed on the laptop is not working properly under driver Intel...
    So I guess that the notice posted by Liam should help you to solve this...

  • Satellite S50-B-15N - display flashes on an online game

    I installed the AMD video drivers for my Satellite S50-B-15N, but the display flashes on an online game (java-based).

    How do I know what card I have and if I have the correct drivers installed?

    With other words, you don't use driver from the download page, Toshiba but driver downloaded directly from AMD right?

  • Satellite S50-B-15N - HDMI does not work after installing Win 8.1

    I just bought a new S50-B-15N.

    When I connect a monitor to the undetected HDMI port.

    I'm under Win 8.1, but cannot find a driver listed there to the poster as missing in Device Manager.

    If you are using the original operating system preinstalled that you got with your machine all the necessary drivers are already preinstalled.
    I don't know what the problem is here. Make sure that the HDMI cable is connected properly and turned on your external display.

    Test it please with your TV too. He has to work.
    I have S50-B-12 q and it works perfectly with my Panasonic TV.

  • On the Satellite 1800-921 black screen problem

    Hello
    My satellite 1800-921 has started to give me a black screen after I turn it on. It loads well, go to the desktop and then the screen turns white and I can't make it respond. We can just distinguish the dialogs on the screen so I don't know if it is a screen problem or things I see on the screen are just ghosts...
    It's a bit worrying!
    Does anyone else have this problem? So far, it seems to happen when I turn it on. Usually, I have to turn it off and reboot to get it back and then it works very well.
    Thank you
    Nancy :)

    Hello

    to the old series, it may be that the FL inverter is broken or damaged the tupe of backlight. In both cases, you can see the screen but without backlight!

    To differi if it is a hard - or software error, you should start the laptop and ESC immediately to enter the BIOS. Then the machine must be running half an hour in the BIOS. When the rupture occurred it is quite sure that some hardware is broken. Otherwise, it is a software based and a restore with recovery CD Toshiba should solve the problem!

    Goodbye, TOK

  • Satellite A210 PSAFGC - Bios Update to get rid of the white screen problem

    I also have the white screen problem and I would like to update my bios to version 1.30, it came with.
    The problem I have is that I have a number of room A210 model PSAFGC.
    Support bulletin 98082422 for the update of the Bios does not have my room exactly number and I can not find something for my model.
    The 2 updates are at 1.70 and 1.90. I read the text of these two, and they seem quite different.
    Don't know what to do. Here is the info of the bulletin.

    Resolution:

    Update the BIOS of the computer to resolve this problem, by clicking on the link in the following list for your computer model.

    -Satellite A210 / A215, Ref. PSAFGU: BIOS version 1.70
    -Satellite A210 / A215, Ref. PSAEGU and PSAELU: BIOS version 1.90
    -Satellite Pro A210 / A215, Ref. PSAFHU: BIOS version 1.70
    -Satellite P200D / P205D, Ref. PSPBLU and PSPBQU: BIOS version 1.40

    REF. of the computer it is printed on a label on the underside of the case.

    Any help?

    Hello

    The Satellite * A210 PSAFGC * series seems to be a Toshiba * Canadian * series and I would recommend checking the Canadian driver Toshiba page if you want to download the compatible BIOS for your laptop.

    Here is the link to the page:
    http://support.Toshiba.ca/support/download/ln_bymodel.asp

    Best regards

  • Satellite A500 - problem with the monitor after restoration

    Hello
    I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

    But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
    ANY IDEAS?

    Thank you

    (I have the disks for the restoration, if that helps.)

    > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
    If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
    When you enter the BIOS settings you see thise lines too?

    Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

    What operating system do you use?

  • IPhone screen problems 5

    I have an iphone 5 with screen problems.  When the phone turns first of all, I can't drag the screen to enter my security code.  The screen is blank.  It will take several times before it stand for a long time, just enter the code.  I also have problems with the original key.  I downloaded the virtual home key, and I'm sure now.  However, when the screen is blank, I use the key home, which does not always, to get it back again.  It's very frustrating.  I'm 1.8 GB for use available, my capacity is 12.5 GB so I don't think that's all. I use the cloud for storage of photos, etc.

    Hello. Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

    More info here:

    https://support.Apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • Re: Qosmio G30 and green screen problem

    Dear friends

    I thing is interesting for any owner of Qosmio to look at this:

    http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/comment-page-4/#comment-130784

    http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/

    My Qosmio G30 is already dead, I got an estimate from the official service, to repair my qosmio costs nearly 600 pounds. Is a design flaw. Go on the internet.

    Interesting links! Thank you.
    I have to say then I must be lucky. My Qosmio G30 (German model) works well and without any problems

  • Computer screen problem after you download the update from Microsoft Windows

    My computer screen appear stained in colors like "shattered windshield appearance" after download Microsoft window update for the hardware called, ATI Technologies, Inc. - Video - ATI MOBILITY RADEON 7000 IGP. I downloaded this after my computer recovered from a serious error (according to the message) that push me to send an error report. He advised me to download the update custom as indicated above.

    Later, I noticed the screen problem. Can someone help me please on this issue?

    Can you please reduce the OS to an earlier time using System Restore tool and check if this problem has disappeared?

Maybe you are looking for

  • ModtDestroySessionHandle does not release all memory resources

    Hello I have a program that attempts to do 1000 iteriations to read the message of the RF, but I get the error "not enough memory to complete this operation" popup. Look like memory leaks about 520 iterations. In this loop, I ModtCreateSessionHandle

  • Could not save the different string value to each element of the array

    I have a configuration of VI to read several channels Veristand project.  The entrance is a table 1 d of channels, (an element for each channel, I want to read).  The channels have different names, each of the elements in the chain must be different.

  • photos which won't open in media player.

    A large number of photos does not open in Media Player. Instead of my original image they are depicted with a Mountain & Lake scene. Trying to open an any of them a message, Media Player States had problems to read this file? Someone at - he lost any

  • WMI response is slow

    Hello I wrote a VB script that will return me a list of critical events received the day before. I use the script to collect the events of 30 + servers. All servers give me the list of events in a few minutes, but a single server takes a long time to

  • BSOD on reboot after installing the patch MS10-046

    I installed the critical patch MS10-046 on a netbook under XP SP3. On reboot, bsod with error message: "The Shell32.dll image is possibly corrupt. The header checksum does not match the checksum calculated. » The only way to start was via a USB key.