S5610y: S5610y computer desktop Slimline won't start

Similar Questions

• s3710t computer desktop slimline HD and RAM upgrade

  I bought desktop s3710t with Vists BONE several years ago and it works very well with no error message.

  I did not have the large files that would come in the future I am looking to upgrade my HD.  The specifications on the HP.com site lists the 1 TB 7200 RPM SATA 3 G (3.0 Gb/s) as the max I could have ordered.

  1. Who is in fact a limit or simply everything what has been proposed when I bought the computer?
  2. I am considering a 3.5 inches 1 or 1.5 TB 7200 RPM, SATA 6 Gb/s, 64 MB Cache drive.  Is there a reason any that this drive does not work? i.e. 3 Gbit/s faster and with 64 MB of Cache?

  I also bought the option/3 GB RAM that is configured as (1 x 2 GB, 1 x 1 GB) DDR2 PC2-6400.

  1. If I replace the key 1 GB with a 2 GB key will there be a reasonable increase in performance?
  2. Is the 4 GB limit or could I go on to say 8 GB? Which will bring a significant improvement?

  I use the computer mainly for word processing, e-mail and photo retouching.

  Please see cannot restore the PC after replacing the hard drive with a disk (Windows 7 and Vista) AF for general information about problems using discs of HP recovery with a disc of AF.

  Please see Advanced identification of a hard drive to Format to aid in the identification of a hard drive of the AF (Advanced Format).

  Sorry, but there are too many discs on the market to recommend an and since 2010, most hard drives have been AF readers.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Desktop iMac won't start

  About 2 months ago or not, I've updated my desktop iMac computer 2011 at El Capitan (running 10.11.1).  Everything has been works fine until this afternoon when I sat in for use.  I remember leaving the computer on when I went to work last night and didn't touch when I got home this morning.  When I tried to turn it on, nothing - no fans spinning, no boot screen, nothing.  I unplugged the computer and held the power button for about 20 seconds, but nothing happened.  Does not even plug and unplugginh both ends of the power cord and have switched plugs.  Does anyone know how to fix this?

  If you do not have any audio or video on what means its are not getting any power, check what is obvious, and if not then it is likely a supply failure.

• Desktop HP won't start

  So a few weeks ago I got a metered on my PC but I refreshed my computer and I was able to get on the internet

  so a few days after he told me I had to configure the updates and I didn't know what it meant so

  He just told me is not to turn it off, but I turned it anyway. So I've updated everything, then it worked really great so a few weeks after

  It is not starting and says preparation auto repair then there is black screen, then I restarted and when it started upward I hit the ESC key and he took me to the boot menu and I didn't know what to do at this time, I tried to safe mode by pressing the f8 key and pressing shift + f8 key but it doesn't do anything when I'm went on the menu, there are a lot of options like diagnosis and end menu and Computer Configuration and recovery system and network end and utility and run uefi. I did the configuration of the computer and I don't know what to do from here if there is anything you could do I would really appreciate it thank you

• Two monitors with computer desktop Slimline?

  Hello

  I want to set up two monitors with my HP Slimline.  Is this possible?  I know I have to change the graphics card to accommodate two cords.

  Slimline s5310f

  64 bit

  NVIDIA GeForce 6150SE nForce 430

  LG E2360V LED monitor

  Hello

  You have options:

  1. install a video card that supports two monitors. -> the best performance option

  2. use a video USB adapter/converter.   -> What are your needs of video connection? VGA, DVI orHDMI

  3. use a USB attachable monitor such as this AOC 16 "monitor.

  Option #1.

  Look here in HP Partsurfer for video cards that are used in the new Slimline models with a 220 Watt power supply.  These cards have been made specifically for the HP Slimline PC with a 220 watt power supply.

• my computer laptop presario won't start, the screen is black and a shrill alarm sounds when I turn it on

  My laptop is a Presario F700 l PC, Vista operating system.

  We live in Italy and service broadband and wireless local apartment acquired last week.  We also bought and installed a Canon printer.  This computer was used in Italy before.  It was purchased in 2008 and also used in Manila and Yokohama.  I just had 'set to top' and checked before leaving the United States in September.

  I do not have the complete operating manual and I know what a yellow light on the front does mean something but I have no idea what.  The computer has been acting 'strange' for about a week in which he wont 'stay' at the top of a list of e-mail, the Office does not 'click', and it activates a different screen of the selected.

  IM technologically dim and this computer is my only link with "House" and my source of planning in Italy-travel. "  Im trying not to panic.  Thanks for your suggestions.

  Thank you very much for this - it's reassuring to know the resource and quick response is there.  I had already tried a solution I found online fixed 1/2 of my questions, but feel sure that these steps will finish my dose.  Thank you very much.

• Computer won't start; 3 long beeps, the fan turns

  Hello

  I have a desktop HP equipped of Windows Vista that does not start correctly.  When I turn it on it looks like it is starting, I hear the fan, the computer will beep 3 times in a row (I would say long beeps) then stops and beeps 3 times in a row again.  Then nothing on the monitor, fan always running.  If I didn't get anything I think that the computer and the monitor's energy-saving.

  Before I turn it on the screen says no signal so I think the screen itself works.  I don't quite see the HP splash screen.  Pressing F8 during startup seems to do nothing.

  I created Vista backup discs (food?), but I don't think they are bootable.  Some back story: a few weeks ago, I tried to download Windows Live.  After installing the updates, I could never Live DL and the next day I got the blue screen of death.  I rebooted, you press F8 repeatedly and Windows started normally.  Although it worked fine for a few days I felt nervous that I did a restore of the system around October 31.  Everything seems to be ok for over a week but now I have this problem.  I thought to upgrade to Windows 7, but do not know what to do at this point.  I've never opened a tour - answers Google talk out of ram or certain types of error of keyboard Bios (3270 keyboard card).

  Help, please!  Sorry to be so long.  :-)

  Hello

  These beeps mean hardware problems so check with a real computer (not the leeks and pics store
  at a Best Buy or other department stores) or HP support.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Sound beeps are error codes that describe a problem with your machine.

  Startup and select CONFIGURATION/SETTINGS (BIOS/CMOS) - usually F2 that you start - look to see BIOS
  Creator, then refer here: If you can not start then check with the manufacturer of the system.

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  If my computer beeps and won't start, what do the beeps mean?
  http://KB.IU.edu/data/afzy.html how to troubleshoot Beep Codes
  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  POSTAL Codes beep
  http://www.technick.NET/public/code/cp_dpage.php?aiocp_dp=guide_beep_codes

  Power on Beep Codes post
  http://www.pchell.com/hardware/beepcodes.shtml

  It can be so other check with the manufacturer of the system.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite P200 - 17 c - Vista won't start up - how replace/repair boot.ini

  Hello

  I have a Toshiba P200 - 17 c of the vista computer and it won't start, freezes on the splash screen. I have
  used iso image to boot from and ran repair disk, makes no difference.
  Machine will not get beyond microsoft loading page (with yellowish scroll bar).

  My question is: How can I replace / repair the boot.ini file to get the machine to start or disable all applications / drivers for applications in order to get the machine to start.

  I have not (my fault) create a back up or restore disk.
  After booting the machine from cd, system repair running and try to run the system restore doesn't work...

  Can anyone advise on a way to replace/repair boot.ini or turn off the drivers?

  Try to avoid to pay another £30 pounds for a recovery disc that I already paid for the licensed software, don't know why.
  If you pay because you do not get a copy of Vista with machine...

  Anyway any help would be most appreciated.

  G

  Hello

  > How to replace / repair the boot.ini file to get the machine to start or disable all applications / drivers for applications in order to get the machine to start.
  I doubt that this could be done under Vista cannot modify the boot.ini as on Win XP OS.
  To edit the boot.ini file you must use the BCDEDIT command.
  However, I put t think it would start the Vista correctly.

  In my opinion you have two options;
  You can use the safe mode and might attempt to start the Vista slim or you have to reinstall the entire operating system yet.
  But I doubt you'll be able to start in safe mode if the system repair and system restore didn't work too.

  So in my opinion the last real solution could be the new facility.

  Concerning

• My desktop picture won't stay as I put it. When I turn on my computer once again, it's a different picture. No one else has access to my computer, ever.

  My desktop picture won't stay as I put it. When I turn on my computer once again, it's a different picture. No one else has access to my computer, ever. Any ideas what's happening?

  Make sure you change the image is not checked...

  

  

• Desktop Compaq Presario has beep and won't start

  My Compaq Presario desktop PC makes a sound beep and won't start. The SN # is CNX65112RS. Someone help me please!

  That's great. Please mark the thread as solved.

• I have an Acer 1810tz-4008 and computer won't start battery. New charged battery - what should I do?

  Original title: the battery starting

  I have an Acer 1810tz-4008 and computer won't start battery.  New charged battery - what should I do?

  Hello

  Check with support from Acer.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/AC/en/us/content/support

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  ===================================

  Other information that might help:

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Why my computer won't start with the DDR RAM?

  eMachines T5026 Memory Specifications Standard memory 512 MB (removable) Maximum memory 4. 0 GB Memory expansion 4 Sockets Memory comments PC2700 DDR SDRAM DIMM. Supports Dual Channel DDR. Type of processor Processor Intel Pentium 4 519 3.06GHz Model comments Bus 533 MHz, Intel 915GV Chipset front

  Upgrade memory for eMachines eMachines T5026 computer, eMachines eMachines T5026 computer takes the PC2700 DDR SDRAM DIMM. Supports Dual Channel DDR. Type of memory and is installed with 512 MB (removable) of memory. You can upgrade your eMachines computer eMachines T5026 for up to 4.0 GB memory, the system has 4 sockets to install memory, already with 512 MB (removable) standard memory installed. For best performance of the computer, use the maximum amount of memory allowed per slot for your computer. Choose the following memory Upgrade for eMachines computer eMachines T5026.

   

  I am running Windows XP SP3 with RAM sticks of 256 MB (2) on an old eMachines T5026 desk top.  I added strips of RAM 1.0 GB (2) for the two slots open and computer would not start.  I tried with stick (1) 1 G and (2) 1 sticks and it still won't start.  I tried to mix and match the 256 with 1 G in each combimation, but it does not start.  Won't start with one or two sticks of 256.  Best Buy had PC3200 DDR RAM but the spec above States use PC2700.  Geek Squad says that PC3200 is OK instead of PC2700.  Is this the problem or I had to do something besides just insert new RAM?   Suggestions welcome.  Thank you.

  Thank you for confirming that. I still think that the above tips are relevant:

  Because what you bought doesn't work, my suggestion is to stay within the plug (PC2700), like this:

  http://www.crucial.com/store/listparts.aspx?model=T5026&cat=RAM

• My computer just won't start in safe mode...

  My computer just won't start in SafeMode... after the signs up to 'safe mode' and pushing enter... it stops (no signal) and normally restarts itself! I need to get rid of malware and infections in the start up... hmmmmm

  First, run a full scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  If nothing detects remove, also try run system restore and your system at a time before the problem happens.

• If my printer USB cable is connected, my computer won't start?

  If the printer is on and the USB port connected.  The computer won't start.  If I turn on the laptop with the USB plugged in and as it starts and then turn on the printer, everything works fine.  Almost ok.  I think I should be able to leave the printer on all the time as I do at work.  Then when I start the computer, the printer is ready.  Every other printer I've ever had worked this way.  Any suggestions?

  Maybe the printer looks like a hard drive (some printers have card readers that make them look like a disk) and the computer attempts to boot from the USB drive instead of the hard drive?  It would be a modification of the settings in the BIOS

  'Teething problems of a PC with a connected external USB drive.
    <>http://wdc.custhelp.com/app/answers/detail/A_ID/1201/~/problems-booting-a-PC-with-an-external-USB-drive-connected>

  Another article I found...  Not sure I can add much further than.

  "USB device does not initialize at startup or Windows XP no longer meets the start or stop"
    <>http://support.Microsoft.com/kb/830957 >

  HTH,
  JW

• Probook4540s: 87% charged battery, won't start not computer.

  87% charged battery, won't start not computer. When power plugged in and started it shows not charging. If I remove the power cable, stop immediately.

  There are several complete responses with the steps to follow, which I did. Finally a new battery of bouht and considers the motherboard bringing not at not charge. The sending of the stack of return for credit.  Will just have to use with the power supply.