S57 stuck in the Acer's Logo

Similar Questions

• Aspire V5 - 122p stuck on the Acer splash screen

  I did a factory reset on windows cleaning 8 using the acer recovery option.  Everything was going well until I tried to update to windows 10 (I did the windows free 10 earlier on this machine without any problem.).  After you have installed windows 10 and the system has been updated, the system said that it was necessary to restart and now it does not start at the top.  It is stuck on the acer screen boot.  I tried all the options in the recovery section that opens after 2 failed charge.  It crashes just on the acer screen. It won't let me boot to safe mode, I can't reset, I can not restore. I don't like on the files on the pc, I just want the pc to be functional again. I have a good restore image on a USB key, but the only way it works is within windows with the acer recovery option.  When I try to restore or repair options, it just says: this pc is not repairable.  I even tried tried support for windows 10 installation/recovery and recovery using a USB drive and I get an error on it.  I tried everything I can think of.  Currently, the laptop is a brick.  Anyone got any ideas on a way to fix this thing do start? Thanks in advance for any help.

  Hello

  I select custom install, not upgrade or repair the USB. When you reach the disk selection panel, select the partition where you had previously installed windows and then click the format button which is below the selection window. After formatting, select the partition to install windows.

  Do it with a windows 10 USB installation. I think it should work.

  Be careful, because in this way, you will lose all the data that is on that partition.

• Stuck in the Windows Startup logo

  Hi I have a problem in my laptop, my OS is Windows 7 Home Basic. I'm stuck in the Windows Startup logo (that has a black background), I'm stuck more then an hour ago and the home screen do not appear. I tried to boot up my laptop in safe mode, but I'm stuck also. I tried to format my C drive and reinstall windows 7 but I'm stuck when the starting configuration are the cursor of the mouse is just turning, I waited over an hour and nothing happens.

  Can someone help me, I want to format my whole HARD drive and have a clean install of windows 7. 7.

  Hello

  How you try to install the OS? You use Windows 7 DVD, or you are trying to install from the hard drive?

  The Partition 1, which is the system partition, the files to start the operating system. For more information on the system partition, you can check the below link:

  http://Windows.Microsoft.com/en-in/Windows/what-are-system-boot-partitions#1TC=Windows-7

  4 the Partition, which is the recovery Partition, is the one which contans the image of the operating system, provided by the Original Equipment Manufacturer (OEM). More likely you would not have received installation media with the system and recovery partition conatins the image of the operating system, you can use if you want to reinstall the operating system.

  If you do not have the installation media and you have not created an either, it's only the recovery partition you can reinstall the operating system.

• MacBook. Watch YouTube. Crashed. Now stuck on the gray white logo login page.

  MacBook.  Watch youtube crashed. Now stuck on reboot white/gray/logo page. Not saved.

  Try to press and hold the command and R keys while it is booting. It will bring up the menu in OS X Utilities, where you can reset or restart OS X.

• My ipad air stuck in the black apple logo and keep turning it back on

  My Ipad air 1 (9.0.2) met black apple logo and keep re - feed in question when I use it on the Internet today.

  I tried to connect with itunes (12.3.2.35) and try to restore from a backup, but was unsuccessful, it cannot recognize my ipad

  Can I use power + Home key, the ipad is going to connect the itunes screen, itunes can recognize my ipad

  I tried to restore from a backup-> a failed

  I tried to download the new firmware (9.1) ipad and the ipad update failure->

  Each of them failed when Ipad beginning of installation of the firmware and the screen change connect itunes screen for apple-black screen

  The info from the failure is unknown error 9, I checked my USB port and cable, but they have no problem

  Can anyone know how to fix it?

  Thank you and thank you for your help.

  Hello!

  I also had this problem on my iPad 2 Air. This is a bug Apple don't want trouble. It was introduced with iOS 9, I hate the time when I clicked on the button "update".

  To resolve this problem you must:

  1. Press and hold the power button on the right side (iPhone 6 or later version) or high (all other iPhones, iPods and iPads) for 3 seconds.
  2. Drag the slider to slide to turn off right confirmation.
  3. Press and hold down the Home button on the front of your iPhone, iPod touch or iPhone.
  4. Plug in your iPhone, iPod touch or iPad to your Mac or Windows PC and make sure that iTunes is running.
  5. Release the Home button when you see the connect to iTunes screen.

  Then, connect your iPad to iTunes and restore. Unfortunately, you will lose all your info.

• [NEED HELP] Acer B1-730HD stuck on the USB logo

  After update my Acer B1-730HD kitkat... The problem seen is dat what acer B1-730HD stuck on the USB logo. I'm looking for solution on google for a few days to view, not yet found how flashing a rom for Acer B1-730HD. I am very disappointed with your service as acer do not DOWNLOAD on the Web site's original rom. Now, I need original rom for Acer B1-730HD, please!

  Sorry to hear that you have this problem after the update of your tablet.

  You try to run a factory data reset.

  1. Turning off the tablet.
  2. Press and hold the Volume up button, which is located closer to the touch screen lock switch.
  3. With the Volume up button which is held, press in and hold the Power button for 3 seconds, then release it. Continue to hold the Volume up button.
  4. Once the tablet screen lights up, release the Volume up button.
  5. In the select the Boot Mode screen, select [SD picture Mode of update]. Use the Volume and Volume keys to navigate through menus and use the power button to select the desired option.
  6. On the Android system recovery screen, select wipe data / factory reset.
  7. When you are prompted to confirm deletion of all user data, select Yes - delete all user data.
  8. On the Android system recovery screen, select reboot system now. Your data will be erased.
  9. Your tablet will restart and go to the Welcome screen. Follow the steps on the screen to configure your tablet.

• Failed to upgrade 10 Windows v3-772 - initialize not just crashes with the acer logo screen

  Hi guys

  I just had my computer repair and the SSD has been changed. I was running 10 before windows and everything was perfect until an update in ruins everything. Long history does not in this

  In any case I unstall all my software and do an update to windows 10. All the preparations and thus seems to be okay. Then it restarts and is stuck. Never of shots. I see the low activity of the HARD drive, but I let it run for 8 hours and still nothing, always gangs in the acer start window. It's once the bios loaded, because I can access that I'm fast and press f2.

  After a while, I gave up and thought maybe it was just a fluke, so I used my recovery dvd and reinstalled my system and the Agency and the outlook and... After the installation of about 5 hours, my system was ready to go. So I decided lets try again. And once again same failure. Just crashes with the Logo of Acer.

  I called Microsoft and they told to do me a startup repair. However it is not possible, I can get it in the repair mode, but none of the functions to work. Then they said that it was a material thing, but everywhere I look States the v3-772 should have no problem with the windows 10.

  I'm normally pretty good to fix my own problems, but in order to fix a problem I need a mistake or error code or something to go for. Does anyone have an idea what to do?

  ncmohr,

  I'm not completely sure what is the problem, but I'll tell you this.  When I look at Windows 10 drivers of Acer and BIOS for your computer model and see that there are some drivers Windows 8 and an old BIOS, it's really bad... especially if you try to get Windows 10 anniversary of working on your computer.

  I don't have the model of your computer, but I'll give you a bunch of links that may or may not help you get a version of Windows 10 installed on your computer.

  http://community.Acer.com/T5/V-and-VN-series-laptops/Acer-Aspire-v3-772-Windows-8-1-clean-install/TD...

  http://community.Acer.com/T5/Windows-10/Acer-Aspire-ES1-111M-cannot-install-Windows-10/m-p/460183#M4...

  https://www.heidoc.NET/Joomla/technology-science/Microsoft/67-Microsoft-Windows-and-Office-ISO-downl...

  https://Rufus.AKEO.IE/

  http://www.Acer.com/AC/en/us/content/Windows10-update

  http://www.Acer.com/AC/en/us/content/drivers

  ---------------------------------------------------------------------------------------------------------------------------------

  If you try to do a upgrade "on-site" Windows 8 for Windows 10 anniversary, then the link below and picture below might help... but I doubt it.

  https://www.Microsoft.com/en-us/software-download/Windows10

  

  Edit: I don't know if you should be using the drivers on the Acer website to download or just use the updated drivers that Windows automatically gives you.  Or a combination of both.  Try to start with the drivers Microsoft gives you automatically.  It could take hours for you to understand... Unfortunately.

  Edit2: On the Acer Web site, they gave you windows driver chipset 8.1 and Intel Management Engine Interface driver. And I suspect that the reason that they did is because they don't have to update your BIOS.

• Acer Iconia A1 - tablet will only power on the acer logo and no more.

  When I try to turn on my Tablet it only goes to the first logo screen.  Usually there is a bigger logo and a logo smaller and powers then on.  It gets stuck on the first screen.  When I turn off, it isn't unusual buzzing noise, lights out.  Any suggestions or should I just throw.

  A1?--

  Try this:

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/30956/~/factory-data-reset-on-the-Iconia-A1-810...

• My iPhone 6 is stuck on the apple logo

  My iPhone 6 is stuck on the apple logo. If I put it to download it just stays like that or it stops and says it has no battery, even when plugged. I can't enter in recovery mode because my home button just stopped working out of the blue. I don't know what to do.

  Charge the battery for an hour and then try the recovery mode.

• Stuck at the apple logo & no backup to restore

  Well, I have an iPhone with ios 9.3.3 6. When I turn on my phone it stuck at the apple logo and after 10 seconds it turns off and when I turn it on again, same question.

  • Not having iTunes backup
  • No effect after hard reset
  • Tried to resolved via Recovery Mode, updated and restored but the problem is always there, always stuck and goes off

  Did you put your iPhone in DFU mode before resetting?

• iPad 2 Mini stuck on the progress bar with the Apple logo and progress bar is not loaded, his impasse

  I pressed on restart all the settings on my iPad Mini 2, so it loaded but it drained. So I rebooted it until he turned back when he turned his back, it was still showing the progress bar, but it was quite moving. I tried to hold down the lock button and the home button, but still, it loads, its stuck on the progress bar and did not progress. I tried to connect to my computer to connect to itunes, but it does Duke host because its deadlock on the progress bar with the apple logo.  .pls help me!

  Try restoring your backup and recovery mode: If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Support

• My iphone is stuck with the itunes logo

  my iphone is stuck with the itunes logo. How can I unlock it? »

  Your phone needs to be restored. Take a look at the instructions here.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Stuck on the Apple Logo screen

  My phone froze so I restarted. It got stuck on the apple logo screen and I tried to restore it. When I have it plugged into my laptop it would not restore because my boot drive is full. I tried to remove as much as I could turn off my laptop and emptying the trash and nothing will work. Its been sitting stuck/frozen on the logo of apple for 4 hours now. How can I fix it?

  Only way runs a restore via iTunes by putting the iPhone in recovery mode

• iMac 8.1 stuck on the apple logo

  Model: iMac8, 1

  2.66 GHz Intel Core 2 Duo

  At 2BG memory when the problem started

  Mountain Lion 10.8.5

  Is in trouble with occasional frosts. Would be closed and it should restart very well. About 2 weeks ago, the computer froze. I shut down the computer and restarted. The apple logo came with the spinning wheel, and then just the apple logo.

  I can start safe mode. Tried resetting the PRAM, reset of SCM. Tried to start with all peripherals except keyboard and mouse disconnected. Use the command R to start the computer and went into the disc utilities. Disc checked and it said disc looks OK. Verified permissions. Mistakes came for iTunes more a warning which was not repairable. Fixed permissions. None of these permits to start properly.

  Parle talked anyone computer repair who suggested to unplug the computer, hold the power button while up to one minute, plug the computer back in and pressing the Start button. It came in fine. A few days letter that the computer froze and I had to stop it. You press the Start button, got the spinning wheel, so only the apple logo and apple logo. Start the computer by pressing command + R and reinstalled Mountain Lion. Installation once it stuck at the apple logo again. Active disk. Drive seems to be OK. Permission verified. Permission with iTunes but issues no warning this time. Repaired permissions. Nada.

  Inserted the installation disk, turned on the computer while holding D key. A ran Apple Hardware tools (tests of short or long). This error message came up twice with different numbers of rpm: 4MOT/1/40000003: drive HARD-110. I know that it's the hard drive fan. Computer repair man came out. Thought problem may be because I only had 2 GB of memory and ran only to open the Lion of mountain with several programs. Upgrade to 4 GB memory, which is recognized by the computer. But the computer still does not start correctly. Tried the Single Mode and run/sbin/fsck - fy. Said it seemed OK, but changed the volume. Ran he says once again and everything seemed OK. Still will not start.

  When I start in the disc, part of the grey background Utilities is missing. If you move the cursor on the screen, the gray background fills.

  Also, when I try from normally I get startup chime, the apple logo and the spinning wheel. After that make a spin the wheel stops, there is sort of a Flash, then the wheel goes and remains the apple logo. I can hear the computer tries to do something, then the arrow cursor appears and can be moved around the screen. It's like that.

  Also installed Mountain Lion on a USB key, it made the startup disk and tried to start the computer normally. Still will not start.

  Any ideas or suggestions for what could be wrong or other things to try?

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• iPad stuck on the apple logo

  IPad is stuck on the Apple logo and halfway along the slide to download

  was reset as the wifi would not connect

  This can help:

  Press and hold the power button / stop and the Home button at the same time, the corners of the black screen,... .in taking... When you see the white apple logo appear to leave bot buttons go.