SA business sector - it is for Siebel only?

Similar Questions

• Legal to use "For DISTRIBUTION only with a NEW or HP Compaq PC" CD sent AFTER the purchase of the REFURBISHED computers?

  Several months after the purchase of a refurbished laptop factory small business HP,
  I came across some problems that I have contacted HP.

  HP sent me (with no extra charge) a set of 2 CDs, both marked
  "For DISTRIBUTION only with a NEW HP or Compaq PC" (underlining)
  and protected by HP (with portions by Microsoft).

  The 2 CD of this set of CD XP Pro DR/OS were:
  Operating system CD
  Application and Driver Recovery DVD

  Since:
  1. the PC was a PC refurbished, rather than another.
  2. the CD set was sent AFTER my purchase, rather than be distributed with it.
      
  I was always a little uneasy on this subject, but had never asked about it before.

  Is it legal to use these CD with my PC HP refurbished?

  Thank you.

  -RJ, USA

  The key words here are "HP refurbished factory."

  That's why since you received the media to "HP" its legal. Recovery media is automatically sent to end users like you to a number of PC makers, with HP being one of many.

  J W Stuart: http://www.pagestart.com

• Adobe Photodeluxe Business Edition 1.0 for Windows 7?

  I have an obviously old version of Adobe Photodeluxe Business Edition 1.0, which runs on an old computer for years (only used for this purpose).  I have updated computers and it is apparently incompatible with Windows 7.  Y at - it an update/fix out there to make it work on Win7?  Thank you.

  Moving to this discussion in the download, installation, commissioning of forum.

  Irish76 Photodeluxe was abandoned.  I recommend Photoshop Elements for your photo editing needs.  You can find details and a 30 day trial at Photo and video editing software | Family of Adobe elements.

• business sectors, records of discoverer and olap

  I am new to discover more olap. I created cubes using AWM. I can see the dimensions, measures using discoverer and olap.
  
  I like to create new calculation sheets and put them in folders and business sectors.
  How can I create new areas of activity and records?
  
  How can I give permissions to other users to view (not edit) my worksheets.
  
  I would like to create folders for other users so that they can save their worksheet in their records. How can I do?
  
  Thank you.

  Hello

  Connect to AWM and attach to the AW in read/write mode. Now, create two folders of measure. You can name what you want and push respective measure measures in records. When you view by D4O or BI excel addin you will see two folders.

  If you have any questions about OLAP right after [forum OLAP | http://forums.oracle.com/forums/forum.jspa?forumID=16]

  Thank you
  Brijesh

• If Google is my default search, can I go and change it if I want to do a search for GMaps; only the default is in the search drop-down list.

  If Google is my default search, can I go and change it if I want to do a search for GMaps; only the default is in the search drop-down list.
  So I have to change the default to Google Maps then back to Google to search for one.

  I have it! It's the topic: config "hiddenoneoffs" where the 3 elements of google, maps and mcafee have been included. There was no space between Google and maps. I put one in from Google Maps. She appeared in the first box-ff, but not sure about the search in the second time zone. I went back to the subject: one-offs. Safe search was shown with a space after Secure. I took out the space. Safe search arose in the 2nd single search box!
  Weird! This is contrary to how they show in the search parameters.
  Can I have messed that when Firefox has been reset all the search engines on an update, but I do not.
  Either incidentally, I tried to re-installation characteristic but the file comes down as a .dmg that I'm not familiar with and don't apparently is 8.0 to win because he couldn't open it. Thank you once again.

• Firefox for Android only displays the desktop version of gmail rather than mobile.

  Android only question.

  I prefer to access gmail via a browser rather than the gmail app. Tests of other browsers on Android (Chrome and Dolphin) I see that they display a mobile-specific version of the gmail Web site.

  Firefox for Android only displays the version of office on my Nexus 7 (5.1 runs Android 2012) - and therefore more difficult to read and use. Any help or ideas would be greatly appreciated.

  Thank you

  Pinellas Chuck

  Well, Yes, it's that Word annoying Tablet.

  What I'm going to describe is difficult to type, so I hope that you can open this page on your tablet.

  Select (0) and copy the following text on your Tablet if possible to avoid the excesses of type:

  general.useragent.override.mail.google.com Android; Tablet;#Android; Mobile;
  

  The forum linkifies this first part, but it is not supposed to be a link.

  (1) open a new tab to Subject: config (type about: config the Awesomebar and hit the arrow go or tap Enter).

  You can bookmark it for easy future access.

  (2) in the search box, type agen and make a pause while Firefox filter list

  (3) scroll down to the bottom and look for a preference named general.useragent.site_specific_overrides and confirm that it has its default value true. If it is set to false, press the reset button for it back to true.

  (4) scroll back up and press the big button "+" to the left of the search box to add a new parameter

  (A) the name of the preference must be general.useragent.override.google. com (for all Google sites) general.useragent.override.mail.google. com (for Gmail only)

  If you type this, beware of the correction automatic insertion of spaces and be sure to remove those.

  If paste, remove the part after that.

  (B) on the right side, type Boolean and in the popup, change it to a String

  (C) the value of the preference should be Android; Tablet; #Android; Mobile; -in other words, substituting Mobile for Tablet.

  If you type, pay attention to the excess spaces.

  If gluing, remove the preference name and extra space before this part.

  (D) then click on create

  If you open https://mail.google.com/ must now use the mobile layout.

  Success?

  Edit: To clarify the name of preference options.

• Use the TC for backups only, while the computer is connected to a different network

  Time Capsule version 7.7.3

  I want to be able to make backups without having to connect to its network via wi - fi, because I'm connected to a different wireless network to access the internet.

  I thought that I need to connect the TC to my computer with an Ethernet cable.

  But how to set it?

  Like this.

  Time Capsule using wired for Mac for backup only.

• How attached iPhone off to USB host for charing only

  How attached iPhone off to USB host for charing only

  How attached a motorized iPhone to USB plug for battery charing

  without the phone starts in normal mode? The phone should simply keep turned off

  and only switch to the mode of charing on its data cable plug-in / original accessory load to the USB host.

  iPhone 6 s.

  You cannot charge an iPhone if it is turned off, because the charger is implemented on the software, which must be supplied to do its job. However, if you plug first, then turn to it it keep the charging circuit on and off the rest of the phone.

• VeriStand "Custom Device" creation, including the different types of sources of code for simulation only

  Hello

  Before I ask my questions, I want to describe my problem:

  I would use VeriStand on a PXI system for simulation only. The simulation includes different types of sources such as Maltlab-Simulink-models, MultiSim SPICE models and code LabView for FPGAS-programming. Simulink models are available as a dll-file, generated with 'Real-Time-Workshop' and 'Simulation tool Kid. " They need to generate heavy duty, calculated by the modulation of the vector space and model the performance of a special converter. The MultiSim model will be transformed via a special VI in LabView code. I can generate code VeriStand (--> NI VeriStand--> Generate tools...). The PWM duty cycles of this dll matlab above are for LabView FPGA code entry. This will be the entrance of the gate of the tansistors of the MultiSim-model. Means, space vector modulation generates tension of the door and get the FPGA code to the ports of the inverter model.

  I am new in programming with VeriStand and LabView. I don't know how I can handle this. But NEITHER says it's possible. So my questions are:

  Is it possible to use VeriStand with more than one device Costum and simulate as a whole simulation. How can I associate different files.

  If this isn't the case, that I have to build a LabView Vi, where all the different sources of models are included.

  Is a walkthough or a user guide available, that I can use to fix my problems.

  I hope you can help out me. I need it for my bachelor thesis very fast. Thank you for your attention.

  Best regards Andre

  Here is a document describing how to create compiled LabVIEW templates and import them into NI VeriStand:

  http://www.NI.com/white-paper/12785/en

  The following link is a more general page describing several model and their support environments in NI VeriStand:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/6488

  Some additional modeling environments are supported, but not necessarily listed here since this is a growing list.  In addition, since NEITHER created a strategy of open model interface called NI VeriStand model framework, it would be possible to connect new types of sources of model in NI VeriStand without too much work.  Then the mapping tool, you found, makes the magic of easily to configure the connections of logical data between models.  You can also easily transfer each model to the individual processor cores, which contributes to the speed of calculation for system-level simulations.

• I found a cd of OS Windows XP in the House who said for distribution only with a new hp or compaq pc, is it legal to install this on my pc tailor-made with a new product key?

  The Windows XP operating system disk

  I found a cd of OS Windows XP in the House who said for distribution only with a new hp or compaq pc, is it legal to install this on my pc tailor-made with a new product key?

  I found a cd of OS Windows XP in the House who said for distribution only with a new hp or compaq pc, is it legal to install this on my pc tailor-made with a new product key?

  No, it is an OEM drive and only good for the computer, it came with.

  If you have a valid license of retail XP but no installation disc:

  How to replace Microsoft software

  http://support.Microsoft.com/default.aspx/KB/326246

• message from BIOS X120e diagnosis "for evaluation only. not for resale. "

  This is just a minor quibble, but when I turn on the messages of 'Diagnostic' in the BIOS, I get the following screen:

  http://imgf.tw/717745842.jpg

  I guess the message 'FOR ASSESSMENT ONLY. NOT FOR THE RESALE"is not supposed to be there; at least this is the case for some previous Thinkpad BIOSes (http://www-307.ibm.com/pc/support/site.wss/MIGR-59180.html).

  Or do I have some special super x120e?

  EDIT: My model code is 0596-CTO.

  It might be fun to try, but no matrix - it has been fixed in the updated BIOS/UEFI:

  http://imgf.tw/232673443.jpg

  Now, the CPU is actually identified!

• SSD for boot only on 1170 HPE-9.

  I just bought a 1170 HPE-9, and it came with a SSD 256 GB and a 1 to as the secondary drive. Is it possible to configure the computer to just use the SSD for boot only, and have all new program of these games, videos and large files to use the 1 TB.  Somewhere, I continue to move these files to the 1 TB drive, but some of the reasons that some programs can do, but others install automatically on the SSD (C:\), fills the SSD so fast.

  Are there any suggestions or comments to avoid such as Itunes or any portal application of games to download directly on the 1 TB.  I know that before the application is downloaded it normally asks you where to install, but in many cases, is not.  I just want to put the SSD just to boot only and the necessary windows files.  Is there a setting in Windows 7 I need to change or RAID configuration or any?

  Yet once, I enjoy comments and/or suggestions.

  Hello

  You can use Windows 7 to move several folders listed under your user ID.

  C hard drive :--> users--> 'your name'---> you can then right mouse click on folders such as: my videos, my music, My Documents, my pictures, Favorites, then choose location. Then use Move to move the file and remap the location on the desired location (1 TB HDD). See the example below.

  

• Is a slot of G0/0 3845 in FPS for HIMI-only mode?

  This was raised at a meeting when we debated on how to put an end to a WAN optical transfer procedure.  I guess I just assumed that the G0/0 slot in the 3845 would act as any other concert with a SFP port, but someone said they thought it would be for HIMI only.  I have not found any documentation to say one way or another, so I thought I'd throw in the community: only concerns the G0/0 slot mode SFP HIMI?

  Of the, we don't have etherswitch modules in this router.

  Thank you!

  Justin

  The reason why I asked because when I used the 3845 router I connected the router to another using FPS because we had a dark fiber.

  The HIMI, if I understand the Cisco document, will allow a switch blade module uplink using this port.

  Port SFP Gi0/0 is not a port HIMI only (which would be silly).  It can be used the way you want to act as a port HIMI.

• ASA for vpn only

  Hello

  I would like to configure the ASA for vpn only. By default, ASA allows traffic from the interface of high security to low security interface. I want to stop it. Is it possible to do without resorting to access lists.

  Thank you

  John

  Define interfaces for the same level of security and make sure that you do not have same-security-traffic permits inter-interface enabled.
  

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00807fc191.shtml

  Hope that helps.

• Where to download the sample database for Siebel Innovation Pack delivery Oracle Cloud 2015?

  Hello

  Where to download the example for Siebel Innovation Pack 2015 database?

  I downloaded the complete packages for Siebel Innovation Pack 2015 for Windows 64 - bit Oracle Cloud delivery, but I can't find the sample database installation folder after downloading all available components.

  Please help, thanks.

  Hello

  DB sample installer are no longer available on Oracle Cloud delivery. To get the sample DB, you need to download the Group of hotfixes 5 of Siebel 15 "Patches and updates" section of the portal My Oracle Support (Patch Id: 22081062) and extract the image from the network using SNIC as usual. You may notice that SNIC now offers local ORACLE XE and sample database.

  Also if you select ORACLE XE options while creating the network image and inspect the network image files, you will miss the separate installers. This is because the sample for Oracle XE database Installer is included in the Web Client of Siebel (Mobile/Developer) and the local database setup is included in the Siebel tools.

  So when you run Setup of the Siebel Web Client for the installation of the patch group, you can choose to include the database, which is installed in quiet mode. Please try to install web client and let us know if it gives you the opportunity to choose to include the example database.

  For more details, please visit virtual library:

  http://docs.Oracle.com/CD/E63029_01/books/SiebInstWIN/SiebInstCOM_Image2.html#wp1995894 http://docs.Oracle.com/CD/E63029_01/Books/SiebInstWIN/SiebInstCOM_Image2.html#wp1995894

  Hope this information helps.

  Thank you best regards &,.

  Jean Arpit