Safari 10 stuttering during scrolling

Similar Questions

• Beta 37 Firefox on Windows 8.1 has lag and stuttering during scrolling

  I recently got a new laptop, and since the minute I installed firefox on it there was delay when scrolling of Web pages. He seems not at first not too bad, with that there is some stuttering when I first open firefox, but it seems that more I am browsing the worst it gets to the point where sometimes I will start to scroll, and then a second later firefox will just jump to the bottom of the page. Internet Explorer and Chrome, that both have perfectly smooth scrolling.

  I tried several things to fix already, is that some of the things that I remember to try:
  -Disable hardware acceleration and smooth scrolling
  -Starting in safe mode
  -Complete reinstall with the new profile
  -Map updated graphics drivers and intel

  Record the new laptop:
  Core i7
  GTX 970M
  16 GB of RAM

  
  

• Satellite Pro P100 - WinDVD stutters during playback

  Satellite toshiba windvd Pro100 stutters during playback of dvd movies - worse yet, when you use windows Vista media player - can help you solve?

  Hello

  If Norton antivir is running, try to disable all functions. My experience is that permanent HDD scan can force CPU for greater use and because of this DVD movie stutters all playing.

• View zoom "fit visible" default definition does not work because it changes during scroll even if the "fit visible" option is checked. How to solve this problem?

  View zoom "fit visible" default definition does not work because it changes during scroll even if the "fit visible" option is checked. How to solve this problem?

  Hi andrik14218037,

  Once you have set to "Fit Visible" it won't change the zoom, scrolling.

  * Make sure that you did not press the Ctrl key while scrolling the page.

  Open Acrobat Reader DC, go to the Help menu & repair the installation, make sure also that it is updated Release Notes | Adobe Acrobat, Reader.

  Let me know if it solves your problem.

  Kind regards

  Nicos

• 10 iOS safari screen do not scroll when you type text

  After the iOS10 update, Safari is not scroll when I m typing text in a field text as here in a forum. I have to scroll the screen by hand for the position where type I´m. it occurs only in Safari, for example Pages works fine.

  I use an iPad Air1, but have the same on my iPhone running iOS 10 6.

  Is there any solution for this?  Thank you.

  Hello Toy4ever,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to be able to effectively tap on your iPad, and I want to help you get things working again.

  What I would recommend starting with a reboot of base and if the problem continues, you can reset the settings on your iPad. Despite the fear two-step attention, this does not affect your data. All of your content will remain intact.

  You can always save your settings in iTunes or iCloud data before doing this reset. This link will guide you through backup if you choose to do so: https://support.apple.com/en-us/HT203977

  What this does is actually reset some of your settings to factory default. This removes all data and applications, photos or contacts, but it removes all of your preferences for the Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, contact ID, brightness & wallpaper and privacy, so we will have to define these things upwards after this reset.

  Do this please go to settings > general > reset > reset all settings.

  If the problem persists, the entire community is here to help.
  Best regards

• Safari freezes for vertical scrolling

  OSX Safari 9.1.2 10.11.6. iMac is often planted so that pages web vertical scrolling (often on Facebook or Yahoo). Must restart to recover. Is there a way to clean cookie or other files that could contribute to this event?

  It is not a cookie issue, but rather an extension incompatible or third Safari causing plug-in Safari crashing.

  Troubleshooting help here > If Safari is slow, unresponsive, which closes unexpectedly or has other issues - Apple Support

• Tecra A8: audio stutters during playback of CD/DVD on Win2K

  We recently started having the laptop Tecra A8 and we run Win2K on them. Everything works well except during playback of CD audio or DVD. Audio stutters really bad (worse with DVD to CD).
  I tried to remove the silent acoustics and re - install the audio drivers but same problem.
  As a test, I put the WinXP preinstalled on one, and then there is no problem. May be driver related issue, but we do not have the best experiences using XP drivers on a Win2K machine.
  Any suggestions would be greatly appreciated.

  As far as I know on the Tecra A8 has been preloaded with a Realtek HD Audio driver.
  I guess you also need the same kind of audio driver for W2k.
  This unit uses a link high-definition audio, and I think you'll need driver that supports this chip.

  See the Toshiba driver for W2k drivers page. In addition if you don t use the Toshiba Recovery CD you need to install all the drivers of Toshiba in the right order. Please see the installation instructions and follow this guideline.

• Messages.app (and safari.app) freeze during use.

  Hello

  I updated a machine x 2 weeks from 10.10.4 in 10.11.2. Refresh, I noticed an abnormal amount of horror while using Safari and Message.  Overview of the community of Apple would be appreciated!

  EtreCheck version: 2.6.6 (226)

  Report generated on 05/01/16 15:39

  Time 02:41

  Download EtreCheck from http://etrecheck.com

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Ignore the known failures of Apple: disabled

  Hardware Information: (Does that mean?)

  MacBook Pro (retina, 13 inches, early 2015)

  [Click for plug technique]

  [Click here for the User Guide]

  MacBook Pro - model: MacBookPro12, 1

  1 3.1 GHz Intel Core i7 CPU: 2 strands

  16 GB RAM not extensible

  BANK 0/DIMM0

  8 GB DDR3-1867 MHz ok

  BANK 1/DIMM0

  8 GB DDR3-1867 MHz ok

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n/ac

  Battery: Health = Normal - Cycle count = 44 - SN = D865205W070FY5GAS

  Video information: (Does that mean?)

  Intel Iris 6100 graphics card

  Color LCD 2560 x 1600

  Thunderbolt Display 2560 x 1440

  Software: (Does that mean?)

  OS X El Capitan 10.11.2 15 c (50) - since the start time: about 6 days

  Disc information: (Does that mean?)

  SM1024G SSD APPLE disk0: (1 TB) (Solid State - TRIM: Yes)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  Macintosh HD (disk 1) /: 999,33 go-go (726,09 free)

  Storage of carrots: disk0s2 999.70 GB Online

  USB information: (Does that mean?)

  Broadcom Corp. Bluetooth USB host controller.

  Logitech USB receiver

  Apple Inc. FaceTime HD camera (display)

  Apple Inc. Apple Thunderbolt Display

  Apple Inc. Audio display

  Lightning information: (Does that mean?)

  Apple Inc. Thunderbolt_bus.

  Thunderbolt Inc. Apple display.

  Configuration files: (Does that mean?)

  / etc/sudoers, 1244, file size but expected 2299

  Guardian: (Does that mean?)

  Mac App Store and identified developers

  Kernel extensions: (Does that mean?)

  /Applications/zoom.us.app

  zoom.us.ZoomAudioDevice [no charge] (1.1 - 10.8 SDK) [click for support]

  / Library/Extensions

  [loading] com.sophos.kext.sav (9.4.50 - 10.9 SDK) [click for support]

  [loading] com.sophos.nke.swi (9.4.50 - 10.9 SDK) [click for support]

  [no charge] foo.tap (1.0) [click for support]

  [no charge] foo.Tun (1.0) [click for support]

  / System/Library/Extensions

  com [no charge]. SMSC.driver.LAN7500 (2.0.2) [click to support]

  com.Cisco.NKE.IPSec [no charge] (2.0.3) [click for support]

  [no charge] com.flipvideo.IOUSBCameraMassStorage (1.0.1) [click for support]

  com.joshuawise.kexts.HoRNDIS [no charge] (6 - SDK 10.0) [click for support]

  Startup items: (Does that mean?)

  CiscoVPN: Path: / System/Library/StartupItems/CiscoVPN

  TAP: path: / Library/StartupItems/tap

  Tun: path: / Library/StartupItems/tun

  Startup items are obsolete in OS X Yosemite

  Launch system officers: (Does that mean?)

  [loading] com.apple.MRTa.plist -invalid signature!

  Launch system demons: (Does that mean?)

  [loading] com.apple.FileSyncAgent.sshd.plist -no signature!

  [loading] com.apple.MRTd.plist -invalid signature!

  [loading] com.apple.airplaydiagnostics.server.mac.plist -/AppleInternal/Applications/AirPlayDiagnostics.app/Contents/Resources/AirPlayDi agnosticsServer: Executable not found!

  [loading] com.apple.configureLocalKDC.plist -no signature!

  [loading] com.apple.efax.plist -no signature!

  [loading] com.apple.emlog.plist -no signature!

  [loading] com.apple.gkreport.plist -no signature!

  [loading] com.apple.locate.plist -no signature!

  [failure] com.apple.logd.plist [click for more information]

  [loading] org.apache.httpd.plist -no signature!

  [operation] org.cups.cupsd.plist -invalid signature!

  [loading]    org.net- snmp.snmpd.plist -no signature!

  [operation] org.ntp.ntpd.plist -no signature!

  [loading] org.postfix.newaliases.plist -no signature!

  [loading] ssh.plist -no signature!

  Launch officers: (Does that mean?)

  [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

  [operation] com.flipvideo.FlipShare.AutoRun.plist [click to support]

  [failure] com.p5sys.jumpdesktop.agent.plist [click to support]

  [operation] com.sophos.uiserver.plist [click to support]

  Launch demons: (Does that mean?)

  [loading] com.adobe.fpsaud.plist [click to support]

  [operation] com.code42.service.FinderExtensionInjector.plist [click to support]

  [operation] com.crashplan.engine.plist [click to support]

  [operation] com.fitbit.galileod.plist [click to support]

  [operation] com.flipvideo.FlipShareServer.launchd.plist [click to support]

  [loading] com.microsoft.office.licensing.helper.plist [click to support]

  [failure] com.p5sys.jumpdesktop.service.plist [click to support]

  [operation] com.sophos.common.servicemanager.plist [click to support]

  User launch officers: (Does that mean?)

  [loading] com.adobe.ARM. [...]. plist [click for support]

  [loading] com.adobe.ARM. [...]. plist [click for support]

  [failure] com.code42.SharePlan.plist [click to support]

  [operation] com.code42.service.Service.plist [click to support]

  [loading] com.google.keystone.agent.plist [click to support]

  [failure] com.zeobit.MacKeeper.Helper.plist [click to support]

  Items in user login: (Does that mean?)

  E-mail application (/ Applications/Mail.app)

  Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)

  CrashPlan menu bar of Application (/Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app)

  Other applications: (Does that mean?)

  com.adobe.Reader.46752 [loading]

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000004.Microsoft Word

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000005.AdobeReader

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000c.Microsoft Excel

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000d.EvernoteHelper

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000e.Microsoft PowerPoint

  [ongoing] com.citrixonline.g2ax.customer.141472

  [ongoing] com.code42.b42menuextra.95392

  [ongoing] com.etresoft.EtreCheck.144992

  [ongoing] com.evernote.Evernote.48352

  com.microsoft.Word.62752 [loading]

  [ongoing] com.Microsoft.AutoUpdate.FBA.94432

  [ongoing] com.Sophos.AutoUpdate

  [ongoing] com.Sophos.Configuration

  [ongoing] com.Sophos.InterCheck

  [ongoing] com.Sophos.notification

  [ongoing] com.Sophos.scan

  [ongoing] com.Sophos.sxld

  [ongoing] com.Sophos.webd

  Plug-ins Internet: (Does that mean?)

  Default browser: Version: 601 - SDK 10.11

  OfficeLiveBrowserPlugin: Version: 12.3.6 [click for support]

  AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - 10.6 SDK [click for support]

  FlashPlayer - 10.6: Version: 20.0.0.267 - 10.6 SDK [click for support]

  AdobePDFViewerNPAPI: Version: 11.0.13 - 10.6 SDK [click for support]

  Silverlight: Version: 5.1.40416.0 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 20.0.0.267 - 10.6 SDK [click for support]

  iPhotoPhotocast: Version: 7.0

  SharePointBrowserPlugin: Version: 14.5.9 - 10.6 SDK [click for support]

  AdobePDFViewer: Version: 11.0.13 - 10.6 SDK [click for support]

  ViewRightWebPlayer: Version: 3.5.0.0 [click for support]

  User Plug-ins internet: (Does that mean?)

  WebEx64: Version: 1.0 - 10.6 SDK [click for support]

  BrowserPlus_2.9.8: Version: 2.9.8 [click for support]

  CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [click to support]

  ZoomUsPlugIn: Version: 3.5.27367.0922 - 10.10 SDK [click for support]

  Safari extensions: (Does that mean?)

  jbsearch

  3rd party preference panes: (Does that mean?)

  3ivx MPEG-4 [click to support]

  Flash Player [click for support]

  Time Machine: (Does that mean?)

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 999,33 GB disc used: 273,24 GB

  Destinations:

  [Network] data

  Total size: TB 3.00

  Total number of backups: 82

  An older backup: 21/08/14, 19:49

  Last backup: 30/12/15, 08:39

  Size of backup drive: Excellent

  Backup TB 3.00 size > (disk size 999,33 GB X 3)

  Top of page process CPU: (Does that mean?)

  100% com.apple.WebKit.Plugin.64

  20% WindowServer

  Customer GoToAssist 11%

  3% kernel_task

  1% fontd

  Top of page process of memory: (Does that mean?)

  1.42 GB kernel_task

  1.02 GB mail

  EverNote 688 MB

  573 MB CrashPlanService

  Softwareupdated 475 MB

  Virtual memory information: (Does that mean?)

  2.60 GB of free RAM

  13 h 00 GB used RAM (5.20 GB being cached)

  Used Swap 0 B

  Diagnostic information: (Does that mean?)

  January 5, 2016, 08:52:24 /Library/Logs/DiagnosticReports/com.apple.WebKit.Plugin.64_2016-01-05-085224_[r edacted].cpu_resource.diag [click for more information]

  January 5, 2016, 03:03:30 /Library/Logs/DiagnosticReports/CrashPlanService_2016-01-05-030330_[redacted].c pu_resource.diag [click for more information]

  January 4, 2016, 06:00:51 PM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-01-04-180051_ [redact ed] .crash

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy a particular line of text to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appears. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

  11. when the test is completed, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  14. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• Firefox crashing and stuttering during video playback

  It is clearly a problem of Firefox. I went through all the help screen and suggestion (usually for me to check things that worked perfectly the day before) I finally find something that worked for me - I've disabled 'FT Deep Dark 10' tab 'appearance' - video stutters is more - although the fact that I had this theme installed for about a year with no problems led me to where I started... It is clearly a problem of Firefox.

  wooddragon45.

  Thanks for the reply - doesn't look like I've found a cure then, but it may be instructive in narrowing the possibilities - it may well have been a crash, possibly a FT DD 10 update report... just too busy at the time to spend the time to beta test, just need my software to work...

  However, I'll post if I find something useful...

  wooddragon45

• Stuttering during playback of AVI files

  I have problem during playback of AVI files on my computer, they stutter when he plays. The problem arises with a wide range of media players.

  The problem started about 2 months ago. Before that time, the same file (s) to play OK!
  The same files play OK on other computers (tested today)...

  I'm having a Satellite Pro m-30, works with XP pro SP2.

  I have tried everything I can find without success of Ant:
  Uninstalled nearly every program.
  Check the virus.
  Checked for Spy-wares.
  Stop all unnecessary processes.
  Defragment the HD.

  Help is wanted

  Hello

  Just a question: do you have this problem just with avi files or even mpg or files if you watch movies with WinDVD DVD?

• Satellite A660 - beep sound stuttering during the use of Player multimedia CD player

  I have a boring beep and stuttering (music is delayed momentarily every few seconds, type electronic interference noise) when using the media player or CD player. I took the laptop for a repair under warranty where they replaced the motherboard without success, they then informed me that they believed that it was a software problem, and a reinstall of Windows 7 was necessary if I've done the following with the recovery disks that I created in that order, results in parentheses;

  -restore the factory software (no change still beeps and stutters)
  -formatted the HD (initially, I thought that solved the problem but after beginning dload and install about 80 Windows updates the question came back)
  -formatted the HD once again (once more I thought that the problem has been resolved, but I heard the beep/stuttering only once or twice)

  Given this HD format takes 26 hours, I will not begin to dload/install updates including Windows 7 until I can try something else or have an answer.

  If anyone can shed some light on this issue, the noise is terrible review it was purchased as a unit of entertainment media playback.

  Thanks for any help in advance here.

  Post edited by: vite11i

  Where the beep from exactly? Speakers or elsewhere?

• Audio stuttering during playback of DVD on the Satellite A100-111

  Hello.
  I have a similar problem to that resolved here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24485

  Basically, if my A111 DVD Player reads a disc (when the orange light is lit), the system slows down and sometimes freezes.
  As a result, the audio and video to DVD stutters.

  I tried to install the DVD-RAM drivers, but the problem is still there.
  The problem exists with every DVD I try to play, be it data, video, disc - ROM, -r or RW.

  I just bought 200 + â? ¬ of original DVD and I am very mad because I can't play.
  Please help me.

  Thank you very much.

  Hey Buddy,

  do you already have a system recovery on your machine? I mean, ok sound sometimes a little too raw reinstall the operating system, but I had so many times of the probs with the drivers, so they have really screwed up my system and after reinstalling everything worked fine again.

  Just a suggestion in a situation like yours.

  See you soon

• 8560w his stuttering during playback of music

  Hi all

  I have the EliteBook 8560w for about a month now and noticed his stuttering when you open a new tab in IE/Chrome/Firefox.

  Since it is a configuration quad-core with 8 GB of RAM, this seems quite strange.

  Anyone else having this problem?

  Configuration information:

  P/N: XX058AV

  CPU: i7 2630QM

  RAM: 8 GB (2 x 4 GB, Slot 1 and 4)

  VGA: ATI over-pants M5950

  HARD DRIVE: WD3200BEKT (320 GB)

  Resolved last night; uninstalled ALL preinstalled software HP, but also drivers for networking and graphics (ATI card also has an Audio HDMI output).

  I let Windows install its complement of driver network, but replaced the ATI driver with the 8.911.3.1 version available here (http://support.amd.com/us/gpudownload/fire/Pages/fire_hp_win7.aspx).

  I have troubleshooted the question using the "DPC latency Checker" available here: http://www.thesycon.de/deu/latency_check.shtml.

  Read the entire web site, because it offers ideas on how bad drivers can influence the audio and video playback.

  Hope this helps someone.

• U3014 dim parameter value includes sections twinkle to normal brightness during scrolling?

  I have my U3014 set to a very low (~ 30%) because of where I work. Sometimes, when I am quickly scrolling pages with text on white background, random rectangular sections of the monitor back to max brightness for about 2 seconds before returning to normal which fairly quickly became irritating. First of all, what is this problem? Second, how to fix it (get a new monitor?)?

  Don't forget to test the U3014 if you have enabled EVS (Smart video improve) off the coast.
  * Press the Menu key to open the OSD (On Screen Display) menu
  Open the display settings
  * Improve the intelligent video highlight
  * Change to Off
  Out of the OSD

  You can test the monitor problem on the system without the other two monitors connected to see if the problem persists?

• Files from Nikon (CS5.5) stuttering during playback. Canon files were very good. Do I need a different sequence setting, upgrade of the computer?

  I have been change in first CS 5.5 and have always enjoyed a generally transparent experience, but since the change of camera from Canon to Nikon systems, I can't play back more than 2 layers of Nikon without playback stutter. I could easily stack 3 or more layers of Canon without issue.all

  I think I'm following best practices for my hardware, and as I said, I've accomplished in the past, but it seems that my machine does not meet the Nikon video anywhere near as well as he did with Canon. Everyone knows this?

  Here is my system info:

  I7 - 2600K
  SSD 256 GB (OS, swap file)

  1 TB WB black (projects, data)

  1 TB WD Black (previews, export)

  GTX 560 Ti 2 GB (on Mercury GPU)

  Ideas or suggestions on things to do back to speed, or do I need an upgrade? It's just images of SLR, I feel that this system should be more than capable of 2 rivers.

  Thank you!

  Hi TyRip,

  See if this helps you: Nikon D7000 footage stutters. Reading | Adobe Premiere Pro CS5.5

  Thank you

  Kevin