Safari becomes unusable intermittendly

Similar Questions

• Equium A210-1AS: Touchpad problem - the mouse becomes unusable

  Hello

  I have problems with the touchpad of my laptop Equium A210-1AS.
  After some time of use of the mouse becomes unusable and just starts bouncing around the screen and becomes uncontrollable.

  The only solution then is to unplug the laptop and turn the power off, re start the touchpad works again.

  I use Windows Vista and downloaded the latest touchpad drivers.

  Any help would be appreciated.

  See you soon
  Widdy1961

  This problem very strange s.
  Could you please tell me if this problem occurs after you reinstall the OS from the Toshiba Recovery CD?
  I read on several forums of Vista that some Microsoft Vista updates may have a bad influence on the touchpad driver
  Therefore, it would be very interesting to know if this problem appears immediately after the use of the recovery CD.

  Greetings

• Qosmio G30 - 175 display starts to blink and walk and becomes unusable

  After a while my Qosmio display starts to Flash and works and becomes unusable.

  A friend suggested that it was overheating.

  So I've equipped with feet to the rear to raise him up to an inch.

  It seemed to work for a while, but now it is restarted.

  Has anyone encountered this problem?

  I wonder if I can increase the speed of the fan in some way...

  David H

  The idea with the breeding of the portable back was pretty good, but have you checked vents for eventual dust? If you find that some of them, use the jet of compressed air to clean.

  Also, I recommend a reinstall of your chipset and display drivers.
  I think there are tools around the internet to control the fan speed, NHC is one of them, but they are only 3 third party programs, you can use them at your own risk.

• Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

  Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

  Hi Comintern,

  ·         Did you do changes on the computer before the show?

  ·         You receive an error message or error code?

  Follow the suggestions below for a possible solution:

   

  Method 1:

   

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Let us know the results.

• Possible to move data in a partitioned into another tablespace table without indexes becoming UNUSABLE?

  Hello

  We use oracle 11.2.0.3 and know that if move us data into partitions to a different tablespace indexes get marked as UNUSABLE.

  It is the range of composite date hash partitioned table.

  As a result, to rebuild the global and local bitmap index.

  Is it possible to transfer data to one another without the index tablespace becomes UNUSABLE?

  Thank you

  Hello

  If you want to update the index (so that it becomes invalid) while you perform the move partition, you can use the index update clause.

  Details are mentioned in the Oracle documentation. Glue one of the page here for quick reference.

  Maintenance of Partitions

  Note: It has an impact on the duration of this sql statement which may increase or decrease depending on the amount of data to move.

  Concerning

  Anurag

• Index on the primary table becomes UNUSABLE after Exchange of partition

  Hello!
  
  I am the scene changes to partition and somehow, I see that the partition that I Exchange eventually becomes "UNUSABLE".
  
  
  The steps that I'm following:
  
  1. creating the temporary table:
  
  CREATE TABLE TEMP_TKTHEADER
  AS SELECT * FROM T3TKTHEADER
  WHERE 1 = 2
  
  2. replacement of the partition
  
  ALTER TABLE T3TKTHEADER
  PART08Q1Q2 PARTITION EXCHANGE
  WITH TABLE TEMP_TKTHEADER
  
  
  After the Exchange is carried out and I ask the stats of the index on the primary table (T3TKTHEADER as in this case):
  
  INDEX_NAME NOM_PARTITION STATUS
  ----------------------------------------------------------------------------------------------
  XTKTHDR1 PART08Q1Q2 UNUSABLE
  XTKTHDR10 PART08Q1Q2 UNUSABLE
  XTKTHDR11 PART08Q1Q2 UNUSABLE
  XTKTHDR12 PART08Q1Q2 UNUSABLE
  XTKTHDR13 PART08Q1Q2 UNUSABLE
  XTKTHDR14 PART08Q1Q2 UNUSABLE
  XTKTHDR2 PART08Q1Q2 UNUSABLE
  XTKTHDR3 PART08Q1Q2 UNUSABLE
  XTKTHDR4 PART08Q1Q2 UNUSABLE
  XTKTHDR5 PART08Q1Q2 UNUSABLE
  XTKTHDR6 PART08Q1Q2 UNUSABLE
  XTKTHDR7 PART08Q1Q2 UNUSABLE
  XTKTHDR8 PART08Q1Q2 UNUSABLE
  XTKTHDR9 PART08Q1Q2 UNUSABLE
  
  
  This is normal behavior!
  Is not swap Partition just supposed to change the pointer to the partition of the temporary table data and leave the rest of the table intact!
  
  Thank you
  AB007

  Dear AB007,

  Please see subpart of swap partition. I assumed that the version of your database is GR 11, 2;

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e10592/statements_3001.htm#BABHHAHF

  INCLUDING | EXCLUDING INDEXES Specify INCLUDING INDEXES  if you want local index partitions or subpartitions to be exchanged with the corresponding table index (for a nonpartitioned table) or local indexes (for a hash-partitioned table).
  Specify EXCLUDING INDEXES  if you want all index partitions or subpartitions corresponding to the partition and all the regular indexes and index partitions on the exchanged table to be marked UNUSABLE.
  

  Hope that helps.

  Ogan

• Updated security 2016-001, iMac becomes unusable

  HHello,

  I'm on an iMac 27-inch end 2013 with Yosemite 10.10.5.

  Today ive installed the 2016-001 security update. Everything went well during the update and the computer was restored as always. Since then, my computer is so slow it's almost unusable. This may take a few minutes to load a web page! Even on chrome or Safari. Skype can not be launched and many other applications works fine and then bam, they are extremely slow unresponsive.

  Someone had an answer for me?

  I have no anti virus.

  Thanks for your help

  Xavier

  I have updated my OS to El Capitan, and everything works fine now.

• my search bar (22 FF) has suddenly become unusable; hitting enter does nothing (now get only toward sites via links and bookmarks)

  I am a FF user for a long time. Now uses version 22 (which seems to have updated from 18 in itself even if I had it to ask me before the update - but 22 2 has worked well for me once I had solved the problem of screen being so great he hid my menu at the top and tabs). Now, all of a sudden, just in the last week, recording a (valid) url in the search bar and pressing on enter "does not" do anything. No search functionality at all because that hitting enter does not cause FF take any notice of putting me in a URL for a site that I want to go to the (I use the same sites over and over so not only some new site acting upward).

  Not my keyboard or mouse is defective; they work as usual in other programs I constantly use - email, database of inventory - and no update or the other program, in Word, Excel, NotePad, my photo program, what that is. Security Essentials last updated a week ago, but I can't see inside to see if it changed anything. Am a XP Pro user and update (until next year, at least!). Keyboard is a real Elite Force, the change (wired) mouse. Have used for a couple of years is therefore not new to me.

  Only way that I can use 22 FF in the last days to get to "any" site, including mine, is to spend on websites pinned to my screen open or my favorites. I tried unpin some sites on my logon screen and then type in their URL and pressing on enter but which has not changed anything - the search bar is always unusable and hit "enter" doesn't do anything.

  So why my search bar did stop working? Is there a solution?

  Hi aaabooks

  You are running Firefox in compatibility mode?

  You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".
  
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Daily Safari becomes more and more slow...

  Daily Safari gets slower and slower and finally crashes.  Use the activity mode CPU monitor, I discovered that the process of networking of Safari, using 200 to 300% of the processor.  I did a force quit and everything was going well for the rest of the day.  It is now a daily process.

  Any ideas on what's going on?

  Do you have the following items on your computer?

  • antivirus (AVG, Avira, Avast, ClamXav, ESET, Kaspersky, McAfee, Norton, Sophos, etc..)
  • 'maintenance' apps (AVG Cleaner, CCleaner, CleanMyMac, MacKeeper, Memory Cleaner, TuneMyMac, etc.)

• Horizontal scrolling in safari becomes jerky and jumpy

  My site has a horizontal scrolling and it works perfectly in all browsers but Safari. Is there a solution to this?

  THX

  Not really. The execution of JavaScript to perform scrolling effects is poor in Safari (share of the browser market worldwide, about 6%). The only approach is to reduce the number of objects with scroll applied effects. This is possible by combining objects with the same parameters in a group and applying effects to the group rather than for each article or to really reduce the number of elements with scroll applied effects. You can also find a great background with the movement of scrolling image is more likely to get bogged down Safari than other uses of the effects of scroll.

• On my new laptop (Windows 8), Thunderbird is running very slowly, fails to show a lot of incoming emails and often becomes unusable.

  I have now two portable Windows 8, but I installed Thunderbird on one of them (an Acer). He gave continual problems. It is very slow recovery and deletion of messages; frequently, it crashes; and when I compare the Thunderbird inbox with my webmail Inbox, it is clear that a lot of incoming messages do not appear on Thunderbird. I tried uninstalling and reinstalling, but it made no difference. I had no problem on this machine with other programs and no problem with Thunderbird on Windows 7 machines.

  frequently, it crashes;

  It crashing or does not? That's a difference.

• Whenever the downloads window is open, the browser becomes unusable. It just FREEZES. As soon as I close the downloads window, Firefox crashes instantly back. I have teinkered around subject: config, but it did nothing. Reinstall did nothing.

  I am running Windows 7 Professional x 64
  Processor: Athlon II x 4 620 (Quad-Core @ 2.6 ghz)
  RAM: 4 GB
  Graphics card: nVidia GeForce 8400GS, distributed well as PNY.

  Did you restart FireFox after you change the subject: config page?
  As well as to check the subject: new config for sure update to FF10 does not reset/change the previous settings altered?

• Inspiron 7559 becomes unusable for the slow 2-3 minutes after each start/sleep

  Hey all,.

  As a preface, it was a laptop bought on sale of warehouse to Amazon, so it's a used laptop. No idea how long it has been used... But the drive was brand new by CystalDiskInfo. I'm guessing that this laptop has been opened but never really used. It is an Inspiron 7559, a fairly common game, laptop running Windows 10.

  Out of the box, this thing was running incredibly slow. Even when you set up Windows 10 navigation between pages was taking 10 + seconds for the mouse input to register. I also tried a fresh install of Windows just to be safe. The only things currently on the computer are the standard bloatware from Dell and a few hardware monitoring tools to diagnose the problem. And when I say slow, I mean open windows Explorer or the task manager takes 30 + seconds and the keyboard and mouse inputs are taking 10 + seconds. When I touched the wall I see that the CPU frequency jumps up to 800 MHz, assumingly the lowest possible frequency according to the range of multiplier.

  My temperatures are usually between 40-60 ° C, but my fans seem never actually start up. When I updated the BIOS fans started blasting, so I know that they are not only totally dead.

  I also run several tests of equipment who say the hard drive, memory, and CPU are fine.

  Someone has any ideas on what could be causing this device or any other means to diagnose the problem? Ran the Dell Diagnostics toolkit and the fan test does not throw any question, but I see no way to control the fans to test even if have the fans running on full blast would avoid this.

  So I was able to understand what I guess was the origin of the problem.

  I uninstalled the driver of "Intel Platform and thermal dynamic framework", detected on your tab chipset drivers page: www.dell.com/.../advanced

  The page says that it has been updated 15/09/2016, so this is a relatively new update... However, whenever this latest version of the driver is installed it prevents my fans ever, causing my massive CPU limitation. I've tried 3 - 4 times back in place, and the second the driver gets uninstalled fans start just up.

  For now, I'm running just with this uninstalled driver, that I could not find a previous version to check if there is a version that works.

  It is not a perfect solution, because I'm sure that this driver is what allows the dynamic zoom of CPU based on thermal, which means that I will be stuck to my stock of CPU frequency... And I certainly want mode to give me performance gain and I like downclocking occurs when I sit idle so I don't eat the battery life.

  If you have the means, I would hope that you would have someone to look into this to see if it is a reported problem.

• HP Officejet 7130 printer will become unusable?

  I currently own two HP Officejet 7130 printers which, unlike a number of other people that I read on the Internet worked very well for me over the past years.  They both will continue to work well the expense and the frequency with which I need to replace the cartridges, I have no complaints.

  UNTIL NOW, THAT IS!

  It seems that HP has decided to stop production of the printer HP 14 (black and tri-color) cartridges that are required for this printer.  The impression that these 14 HP printer cartridges are no longer available at any stores such as Staples, Office Depot... or any other office supplies.  Whereas now, I went to eBay to buy some, I now have a second question.  The HP Officejet 7130 is found being one of the printers that HP decided to use expiration dating on ink.  According to the HP documentation on it, the ink cartridge expired, there is no way to substitute this on the HP Officejet 7130.

  While I could find and buy several HP 14 eBay ink cartridges that have a date of expiry of the beginning of 2014, it means that some time in about a year, my printer will STOP WORKING!  Is not cool because it has absolutely nothing to with an operating system level because I am currently using my 7130 s on Windows 7.   HP is forcing me to buy another printer.

  If I'm missing something here and I am anyway by mistake with what I mean, please let me know the error of my ways and how to work around this problem.

  If that is true, then I would like to know what HP will do to help me out of this jam after being a loyal customer of HP printer for more than 20 years now.

  Thanks in advance for any help on this matter.

  14 cartridges are available from HP, you can order then supply course site here HP.

  Edit - HP actually rarely stops cartridges.  Original cartridges for Thinkjet initiated nearly 30 years ago are still available.  I remember well the last cartridges that have been abandoned have been those of the PaintJet XL300.  While retail sales volumes may choose to not devote space to showcase for the older cartridges, but the cartridges are generally still available through HP online

• Actual windows becomes unusable if Windows virtual hangs up on restart

  I'm curious to know if there is a way out of this situation:

  I run VMWorkstation 8 on Windows 7 machine. One of the virtual machines is Windows Vista. So what happens is that sometimes when I try to reboot the virtual Vista he indefinitely hung up on the "Shut down windows" message

  At the same time the mouse disappears (as it would if Vista has been installed in a real machine) and I can't seem to get out of the virtual machine in the real.

  What I end up doing, is hitting Ctrl + Alt + Delete on the keyboard and start the Task Manager. Then the strange thing is that, even if this leads to the top of the mouse on the screen, it is limited to a small window (where Vista virtual is) and I can't move it out of this window. So if I'm lucky and the task manager gets into the same window, so I start to kill wmware*.exe process until VMWorkstation closes and I can get my computer back and operational.

  Is there a better way to do it?

  Hi ahmd9,

  This sounds like the VM "caught" the keyboard and mouse - what normal that when the graphic environment of the virtual machine is not running more.  When this happens, just press the CTRL and Alt keys simultaneously and release the two... it is the combination of keys "ungrab", which tells of VMware Workstation to restore the host system with keyboard and mouse.  The status bar at the bottom of the window of VMware Workstation should remember the key ungrab combination, saying something like: "to return to your computer, press Ctrl-Alt.

  If you press the combination of keys ungrab, does everything, then back to normal?

  See you soon,.

  --

  Darius