HP Officejet 7130 printer will become unusable?

Similar Questions

• Since the end of the Windows 7 upgrade my HP Officejet J4500 printer will not print. Error Msg said "did not supported operating system"? Do I have to buy a new printer?

  My HP Officejet J4500 printer prints are no longer the documents since the installation of Windows 7?  Msg error starting of installation has the operating system not supported?

  Your problem does not have Windows Update features (compared to the upgrade of Windows).

  Contact HP support.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP officejet 5740: printer will not accept to and numbers and say it often a paper tray is open when it is not

  My 5740 will not accept and to the numbers in the boxes provided, as I tried to print a PDF allaient17 to 27 pages and he kept going back and print pages from 16 down. Allso sometimes it stops printing a paper tray is open when it isn't.

  Any help will be most appreciated.

  mny TKS.

  Mant tks Dragon fur, I'll give that a try serious and get back to you with answers solved.

• I have a premeium 6700 officejet that printer will not print if ANY color cartridge is low or empty.

  I have an Officejet 6700 Premium printer e all-in-one.  I can not print if ANY color cartridge is low or empty and black is full, and I want to print something that uses black ink.  Is this what can I do to print in black only without replacing color cartridges when they are not needed for the print job? Still, I can't make any impression unless all color cartridges are not low or empty.

  Hello

  I recommend taking a look at the following document, including the section "How to print with Black Ink Only":

  http://support.HP.com/us-en/document/c03746188

• HP officejet 4500 printer will not print on the new Windows 7 computer

  My new gateway computer recognizes my hp office jet 4500, but it will not be printed. What should do?

  Have you actually installed according to the instructions from HP, which is to use the installation cd HP or HP site features complete downloading, connecting only when the installation says too much, or simply plug in?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=3919449#n195

• I use Adobe CS6 software production. If I will to 10.7 or higher, Adobe will become NOT usable?

  I use the Adobe Production CS6 software.  If I upgrade the system to 10.7 or higher, the also Adobe will become unusable?

  CS6 works with 10.9 on my system, it seems likely that 10.7 would also work with CS6. You should not move unless you have a full backup and bootable from your system existing.

• I just replaced the black cartridge on my HP Officejet 6310 printer and get a message that I need to replace the cartridge. What is the problem?

  Officejet 6310 printer will not print.

  Again - the cartridge and DATED?  Did you remove all plastic covering the nozzle before insert?  Have you read in the Quick Installation Guide that you have when you first set up the printer?

  If still no joy and it's a genuine HP cartridge, contact HP and get them to replace it.

• OfficeJet 7000 Wide Format pri: HP Officejet 7000 Wide format printer will not print black ink

  I'm looking for a solution fix what is an occasional problem with our Officejet 7000 and arose once again today. The printer will print any black ink. I did the procedure to print alignment and cleaning print head as well.  I tried to clean the evacuation on the real printer cartridge area as recommended by some responses from support group.  When this has happened, I can fix it usually wiping the area where the ink comes out of the printer cartridge, but nothing works today.  The cartridge is 3/4 full.

  Other than to throw this printer and all the ink cartridges, I bought already for later use, suggestions for what else someone could solve this problem?  There seems to be a lot of people who have posted similar problems in recent years.

  Hi @P-architect,.

  Thanks for the reply.

  The only print head is CN643A, the 6500 and 7500 HP 564 cartridges as well usage. I searched the HP Print Store and found that you really want to be looking for a KIT of REPLACEMENT FIELD HP 564, and the part number is CE001A. The replacement of the field Kit contains a set of ink which are used to set up the print head. It's not like there are none currently in stock, but it is a clickable link to resellers who may have one available.

  I hope this helps!

  Thank you.

• OfficeJet 4622 prints not Windows 8, but will print from Linux

  Hello world

  I have an OfficeJet-4622 printer set up on my network (wireless) and two computers. The first is a portable computer running Windows 8, and the second is a desktop running Ubuntu Linux. Both have HP (and HP Setup) drivers installed. When I try to print something from the Windows 8, it will start printing and then say that year error has occurred. The print will be print part of a page, nothing or half of employment and a white sheet.

  However, if 'copy' of the printer, or print from the Linux computer, everything works fine. One thing to note is that I'm using remanufactured cartridges, but they should not cause a problem on a single computer only.

  I am at a loss here, so any suggestions on what to do to solve this problem are greatly appreciated.

  Thank you and have a nice day.
  Patrick.

  I think I solved the problem eventually. On one of the posts of post-its, it linked to a page where you can use the automatic installation wizard. I did, and it reinstalled my driver (s). He had said the previous installation was not completed successfully. So I'll try again to print. The print came out fine. If the previous installation must have been the problem.

• OfficeJet 4500 G510g: OfficeJet 4500 G510g will not print full page

  I'm having a problem that gets worse.  My OfficeJet 4500 G510g will not print a full page.  I have installed the latest updates, verified that it's the default printer, aligned the cartridges 2 or 3 times, cleaned the printheads of 2 or 3 times. but no success in getting it to print an entire page

  Hi @thrandall,

  Thanks for getting back to me.

  My suspicion was correct, there is a hardware problem with system of distribution of ink or cartridge.

  Have you tried these steps in my previous post?

• HP Officejet 6500 more: printer will not e-mail program scan

  My Officejet 6500 more will not scan to my e-mail program, Outlook Express, taken care of by Yahoo. I have re downloaded the HP print and installed software. Tried again to scan for "e-mail address as PDF", but get the error message "the HP Application scan was unable to save the file at the specified location"

  I use the upgrade of Win10 of Win7. The printer is connected to my cpmputer via a USB cable.

  Any suggestion would be appreciated.

  Thank you

  Thank you for your reply, I tried your suggestion, but it did not work and the reason was a driver error. I have re-installed the driver software of HP and so far that seems to have solved the problem! I guess time will tell. Thanks again for the help, much appreciated, this a great forum help those in need.

• HP Officejet J4680 series: all-in-one HP Officejet J4680 series will not print Word documents

  My HP Officejet J4680 all-in-one ink jet printer will not print in Word 2010 documents. It will print .pdf and Excel 2010 documents. I ran printing HP and doctor Scan and check it and put to date and said all is fine. Just around checking on my computer it said in the devices that the printer is ok. I printed the test from the doctor of Hp Plug and it came out ok. Seems so that Word documents are the only problem. I installed Windows 10 earlier so not totally sure that's the problem I don't remember if I used the word since installation up to now.

  I bought this printer in 2010 and have had no problems with it and I can tell you that I have printed a large NUMBER of pages.

  Any ideas how to get this printer working?

  Thank you!

  Hey @Ric88xx, welcome to the Forums of HP!

  I'd love to help you with your JO J4680. I understand that you are unable to print from Word, but you can print the PDF and Excel. Please use the following article from Microsoft to solve the problem and I would like to know the results of your efforts: How to troubleshoot printing in Word failures.

  If this resolves the issue, please click Accept as Solution button below. If the problem persists, let me know and I will do everything I can to help. Thank you.

• HP officejet 100: printer hp officejet 100 laptop will support Windows CE?

  I'm working on Windows CE project.  I need to print with hp officejet 100 via Bluetooth or usb. I don't know if the printer hp officejet 100 laptop will support Windows CE or not. Can someone clarify for me please.

  Hi SureshR,

  This OfficeJet 100 was not designed to work with Windows CE, as such. The specifications include Windows XP, Vista and 7.

  You you can try the different drivers to see if none of them work. Also check for the built-in drivers in Windows CE. The specifications page points to www.westtek.com for Windows Mobile printing.

  Good luck

• OfficeJet 5740: Officejet printer will work without a computer?

  83, my mother wanted a new Copier for her sewing room - there is a computer in that room. She went out a bought a HP all-in-one Officejet 5740. I said, "MOM, I think that this printer must be connected to the computer to operate."

  Am I right in assuming this? I've never had to think about before because whenever I bought a printer to hang on to my computer.

  Thus, this printer will not work as a standalone Copier? DRM for clarification.

  Dolly

  You're mother is more intelligent that you are, tell him that I said.

  Copiers do not need to be attached to the PC to make the copies, and the printer she bought is also a copier.

• Computer laptop 32 bit Vista will not shareprint with XP Office officejet v40 printer. Help, please

  I have read forums and tried everything for 4 days without luck.

  I'm trying to print from my 32-bit vista laptop to my printer of office xp... an old officejet v40 printer.

  The office prints well on this printer from xp desktop attached and I named shared printer.  All security and firewall disabled. I started at least 20 times and have tried to install unsuccessfully

  It seems that the HP driver Web page has a driver for vista, BUT the instructions are only if you hang the printer directly with the USB... No shared networking. I always thought that you could just download the dirver to the computer and it turns when you go to install it. I made for the devil to the hook to the top of my computer vista laptop directly to the printer and it installs and works fine... BUT I want it in a network or shared... no USB.

  Also, if I go to "Add a network printer" and select the printer in office shared in the list, it will be in my control panel as a printer on my laptop, but when I hit print, I get the pop box, which allows you to set the preferences, print etc, and when I hit print again, the small pop-up box flashes on for a second that it's printing paper... but no printing. Instead of this, when go to see what happened to the list of document status, I see the State of the document listed as error - printing"

  I don't know if I have vista for this printer driver in my laptop or what? I'm totally confused by the present. I read somewhere that there is no way for a computer vista laptop to print over the network to this HP printer while the printer is connected directly to a computer running XP? Is this true?

  I rarely if ever gave to be beaten by computer problems... but this one had me done bankruptcy for the third time and about to give up. Any help would be appreciated.

  THIS TIME IT WORKED! After several months of not being able to print from my computer vista laptop for my v40 OfficeJet (which is connected to my desktop XP) I decided that I would give it one more try. I used once more Bob of the 2nd ad above, as well as suggesion Eddy's instructions to select "New Port" when you arrive at the end close to Bob's instructions. THIS TIME IT WORKED! I think I'm out track somewhere when I tried to do this several months ago. In any case, I thought that I have would expand a bit on what Bob wrote just in case there's someone that who needs a little more in detail. (For a beginner, even the smallest thing can be stumbling blocks if you have never done this kind of thing before)

  On your computer vista laptop, go to printers and Control Panel. When you click the Printers icon you can click on add printer and select Add local printer (it even if it is not a local printer, but a printer that is connected to your desktop computer in another room) Ok... Then select "Use the existing Port" LP1. Then you select your printer from the list and click on it to install the driver. I think that you then click FINISH. (No you are not really over, so don't bother is not clicking on this Test Page again). Once you click FINISH, you will automatically be on the screen that shows the printers you have installed on your laptop. for help. You will then see the the OfficeJet v40 as the printer that you just installed. Highlight and right click. Then select "Run as Administrator". That will open a submenu where you and then click Properties. Then click on Ports, Add Port. Select "Local Port" and click "New Port" (as Eddy proposed). A small screen will appear where you enter now the \\NameOfPrinterYouArePrintingTo\ShareNameOfThatPrinter once you do this and click on apply and OK, you will be brought to a final screen where you will notice that the box LP1 is more verified. Place a check mark was automatically placed in the new port that you just created above IE name\sharename.  YOUR DONE!