The message to dropbox who cannot establish a secure connection

Similar Questions

• Bug Safari: could not establish a secure connection & search bar problem

  I'm hosting a server wiki on one of my macs and he got a self-signed certificate (the one generated by the server application). Since a few days ago (10.11.3 upgrade could be the culprit), Safari cannot establish a secure connection, no more. Oddly enough, this kind of coincide with the search box issue as well, which has been documented elsewhere.

  I checked, the certificate is marked as "always trust" in my keychain. I can access the wiki perfectly in Firefox for example.

  What a paradox, that I have to use third party software to access a software solution Apple...?

  Please let me know if you have had the same problems and if you managed to solve it.

  Thank you

  HE'S

  Hey! Take a look at this. This temporary has helped a number of users here. Over time, everything should be resolved then wait for a while.

  A possible solution to the problem of address bar: disable the Safari Suggestions

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

• I get the message "Windows Movie maker cannot save to the specified location".

  I get the message "Windows Movie maker cannot save to the specified location".  I tried different places, to moved all the files in these locations, recreated film, enhanced virtual memory to computers at 8 GB and 47GB available disk space. Tried all options to the title of best quality, Best Fit, other settings and including the CD recording. But it still won't save as a movie to a project. I have 5 separate voice recordings, and a video with music incorporated for a total of about 24 MB. Help?

  Hi Mare Hausen,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. What is the total size of the memory (RAM) installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Movie Maker 2 stops responding when you try to save a large movie file

  http://support.Microsoft.com/kb/814836

• I get the message error "this document cannot be printed.

  When you try to print a pdf file, I get the message error "this document cannot be printed. The problem is when I switch to another printer.

  Hello

  OK, consider to reinstall Adobe Reader. First uninstall it and then reinstall.

  If this did not help then in the print dialog box, make sure the "Print to file" checkbox is not checked!

  Make sure that you have selected the right printer and try to preview before print see if it shows anything be it for printing?

  Have a look here

  https://www.Adobe.com/support/techdocs/333236.html

  Hope above can help,

• Questions of ESXi 5.1 ISCSI--> cannot establish a network connection (continued)

  Hello world

  I had a problem there not too long ago (thread link below) where my ESXi hosts could not establish a connection with an IBM DS3500 on start up and "rescan", however their connectivity worked correctly without any problem after commissioning and when a "rescan" finished. We determined that the most likely cause was the unit IBM itself. However, I wasn't completely satisfied.

  In order to deepen the question and dismiss my guests being the problem, I created a unit ISCSI myself with two new hosts of ESXi 5.1 (version 1157734).

  ESXi signals that it cannot connect to the initiator ISCSI (network error) - but it can run virtual machines and browse data stores?

  The configuration is the following:

  Test environment:

  2 x ESXi 1157734 hosts

  1 x server Freenas ISCSI (ZFS R10)

  At the start of my ESXi hosts in the test environment, download the same error as our production environment. They also put on the same error message (in the event log) when I "rescan" map of the ISCSI software. However, once the scan is finished, I can't see any error message and everything continues as it should (Round robin, active active). I can get a brilliant flow also. It's as if the errors are almost... false positives?

  Example of the error message (test environment):

  Connection to the iSCSI target

  IQN.2011 - 03.org.example.istgt:iscsi on vmhba35

  @ vmk2 has failed. The iSCSI initiator couldn't

  establish a network connection to the target.

  error

  17/10/2013-08:33:35

  ESXi hosts are configured as follows:

  Test environment:

  • (ESXi hosts) Two network cards for ISCSI, one for VM traffic
    • NIC1: 10.20.20.2/24, NIC2: 10.30.30.2/24
  • (Freenas) Two network cards installed on the ISCSI device (dedicated to ISCSI traffic)
    • NIC1: 10.20.20.1/24, NIC2: 10.30.30.1/24
  • ESXi is set to round robin, which works properly (I can max on both ports at the same time)
  • Two VMKs are related to the ISCSI Software initiator and defined to dynamically discover the two ISCSI addresses
  • Unity of ISCSI and the hosts are not on the VLAN, the switch is dedicated to ISCSI traffic (However in the production, the two networks are separated by VLAN.) I removed the in the test environment to simplify everything)
  • The vSwitches (who hold a single VMK for ISCSI) are fixed:
    • "Promiscuous" mode: reject
    • Change of MAC address: accept
    • Forged passes: accept
    • The traffic shaping: disabled
    • No NIC teaming (obviously)
    • Each VMK inherits the settings of these

  Quick points:

  • My hosts use VMware approved NIC in my test environment. My production environment runs on full VMware hardware approved
  • Can I use ping of vmk join each each VMK ISCSI initiator
  • I can use the nc-z target_ip 3260 command to check connectivity to the port
  • The ISCSI test has two network adapters, each on 1 Gbps ports
    • I can get around 800mbps per port when copying lots of files (both ports are active)
    • I see no error in copying a large number of virtual machines around, or backup files
  • I only see errors on start up and "rescan".
  • I have two network adapters on each host ESXi dedicated for ISCSI. Each NETWORK card has a single VMK. A single mapped port on ISCSI, the other is mapped to port B (I used to have two VMKs by nic, but I removed that in order to simplify everything)
  • I have updated the firmware on our switch of production. No results
  • I've used 4 different switches in order to avoid a network problem. No results
  • I tested ESXi versions 5.0, 5.1 (799733 & 1157734), all have the same mistakes
  • The ISCSI ports are on different networks according to the VMware (I was told not to put on the same network VMKs)

  Any ideas? It's starting to drive me up the wall. Any help would be greatly appreciated

  I've seen several times in recent months and was beginning to think it is specific to the HP P2000 units because it's the only time wherever I saw him! I now believe that ESX/iSCSI rather than issues of driver or table.

  On my last install, I found that errors occur as soon as the table is connected, i.e. before any storage is displayed.

  Single host ESX, no guests. 2 Intel adapters to 2 HP past by dedicated HP P2000 1 GB table with all 8 wired ports.

  All roads are good, all lights are in the State expected.

  It did not affect the use of the storage in question to any site, so there has been no need / a momentum of any further investigation.

  B! 886y annoying however!

• BPOS error "could not establish a secure connection t server. Please check if you have installed the required certificates.

  Hello

  We use the Microsoft Online Service in our office.

  The user is confronted with the question by connecting to the Microsoft Online Service, it gives the error could not establish a secure connection t server.  Please check if you have installed the required certificates.

  The one you suggest to fix the problem

  Thank you

  Hello
   
  Note that your computer is under domain, you must contact the technet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/category/MicrosoftOnlineServices

• I want to install the ios 9.3 update in my iPad. I get the message: "audit failed because you are no longer connected to the Internet" actually, my wifi works and I'm online. Help, please.

  I wanted to install an update to iOS 9.3 on my iPad mini legacy. After that I entered the password for my motto. I receive the message: "check failed because you are no longer connected to the Internet. I then checked my wifi and works and I can go online. why I can't update? Help, please. Thank you

  This is a known error for which Apple seeks a solution. See Troubleshooting iOS 9.3 update problems.

• When I try to use a MS fingerprint reader I get the message "no mapping between account names and security IDS was done."

  Original title: fingerprint digital mapping

  When I try to use a MS fingerprint reader I get the message "no mapping between account names and security IDS was done."

  I tried the fix (http://support.microsoft.com/kb/890737?wa=wsignin1.0) without success.

  Any ideas?

  Hello

  Have you tried to reinstall the fingerprint reader, as mentioned in the previous post article?

  If your computer is on a domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:
  Windows XP IT Pro Forums
   
  For more information, see the articles:
  Understand and configure the Welcome screen and the classic logon screen
   

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• When I try to log in my account, I get the message "a network error occurred while trying to connect.  How can I fix it?

  When I try to log in my account, I get the message "a network error occurred while trying to connect.  How can I fix it?

  Hi Mark,

  Are you trying to connect through Adobe Reader? If so, what happens when you connect via the web interface at https://cloud.acrobat.com?

  (We had reports of this error occurring in the latest version of the reader.)

  Best,

  Sara

• Safari is unable to establish a secure connection

  More get, "Cannot open page" in Safari "...". because Safari is unable to establish a secure connection... ' Just happened with a page on the site of the City Government. All I can do to fix this. MBP3, 1, OS X 10.8.5, Safari 6.2.8

  Is the time within 5 minutes or less than the exact time? Otherwise, no secure connections.

• When I download and try to install Thunderbird, I get the message "your Thunderbird profile cannot be loaded, it may be missing or inaccessible.

  Due to a virus, I redownloaded 24.4.0 Thunderbird and it completed than in trying to open Thunderbird when I get the message "cannot load your Thunderbird profile. It may be missing or inaccessible. "I know that the profile exists in a folder"recovered files ". I tried to move to the current folder in Thunderbird, but get the same message. I tried to follow a Mozillazine article, but it's too complicated. Is there assistance online, such as chat or by phone?

  # It is not necessary to move the e00qmtzd.default.old for now.

  You can leave it in place and restore the C:\Restore file e00qmtzd.default.

• HP Slate 17 l010: HP Slate 17 l010 cannot establish a reliable connection with the server

  Hi, the other day, I lit one of our tablets HP Slate 17 L010 and started getting the message above. I factory reset the device and still get the error. I can connect to the internet on the device but can't seem to add all Google accounts. Someone at - it advice to solve this problem?

  Hi!, @joshhm:

  Welcome to Forum!

  See the Guide to the user, page 10 and later... Chapter 3... http://h10032.www1.HP.com/CTG/manual/c04446211

  Try with update.zip, of... http://support.HP.com/us-en/drivers/selfservice/HP-slate-17-L000-all-in-one-desktop-PC-series/7161751/model/7276370

  Note: previously, select the software in your country.

• Get the message - "Unable to create my object of security" when open My Safe

  Whenever I try to open the folder 'my safe' I get this message...

  Cannot create my safe view object.
  My chest cannot be unlocked, because its data file is currently in use or has just been used by another application. Unlocking cannot continue until the safe My data file is closed and removed from the cache files of the operating system. This is usually a temporary condition. Wait a few seconds and try again.

  Does anyone know how to do to solve this problem, or if someone has had this problem before?

  Hello

  I guess that any application that runs in the background OS possibly use my secure file and therefore, you get this message.

  I studied a bit and it seems that my Safe is part of protection as a result of the pre-installed software.
  I think that the software of fingerprints (part of the suite software Protect) need the My Safe secure file date of the user. This file you can import or export the Passport form.

  In my opinion, the fingerprint use my safe and it's why the message.
  Perhaps that the settings are saved only in the cache and that's why you should remove.

  Go to the properties of the HARD drive and on the general tab, you will find disk cleanup option. Run it and don't remove all of the necessary files.

• "the settings saved on this network do not match the network requirement" is the message that I get when I try to connect to my wifi

  I changed my router to another wireless.  Since then, my laptop cannot connect to my wifi.  When I search my wireless network, it is exed out in red.  and the message "the settings saved on this network do not match the network requirement"... Please help

  [moved from comments]

  Hey Mike,

  -What version of Windows is installed on the computer?

  This problem usually occurs with wireless networks. I suggest you try the suggestions in http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/the-settings-saved-on-this-computer-does-not-match/a82432f2-9312-480a-b2ea-720033c73387

  Let us know if this can help, or if you have any questions.

• Can I change the text of the button send on a box of a secure connection?

  Can I change the text of the submit button in the box of a secure connection?

  

  Or, perhaps, I can replace the button with the image?

  So is - it possible and how?

  Any suggestions are welcome.

  Hello

  It's a web form in html button

  You can do what you really like her and you can google the basics of CSS, HTML and forms, if you need help on this.

  -A button input of form can be the style you want and you can change the value that is the formulation of what you want.

  -You can change input to a button, style only and have text/html inside the element tags.

  -You can change the input submit type image.