Safari issues - 9.1.3 version

Similar Questions

• How can I get my ps 3.0 to install on my laptop? compatibility issues with the new version of windows

  How can I get my ps 3.0 to install on my laptop? compatibility issues with the new version of windows

  It is hopelessly outdated. It is simply not compatible.

  Mylenium

• Impossible to update Safari to the latest possible version of Mac OS x Lion

  Hi guys,.

  I've recently upgraded to Lion 10.7.5 - no Snow Leopard; recently installed in a fresh, empty SSD through SATA cable to a Macbook Pro under Snow Leopard (so I don't have to worry about the old legacy Snow Leopard / unwanted system files potentially slow down my Mac). I also replaced my former SL with that SSD hard drive physically.

  But my version of Safari still appears as 5.1.7 even after doing a "software update... "OSX 10.7.5 Apple menu. Mac App store does not all versions of Safari either.

  Any ideas how can I get the latest version of Safari possible for OSX Lion of a trust link Apple?

  I don't want to download Safari to third party sites as they can overlay virtually anything with the App. No I am also looking to upgrade to the newer OSX versions immediately that I have a Macbook Pro mid-2009 and concerned about performance issues between new operating system software and old equipment.

  Thank you

  El Capitan will perform better than Lion, so the upgrade would be useful not to mention to get the latest version of Safari.

• No sound no issue on 64 bit versions of Windows 8 - Compaq CQ60 - 140EV

  Hello guys!

  I have the following problem after installation of 64-bit Windows 8:

  Independent of the version - home page, pro or business, on my Compaq CQ60 - 140EV speakers produce no sound, not even on the external speaker no sound. In Device Manager, everything seems to be ok. With all versions 32 bit Windows-8 or with previews of 64-bit version of W8-developer preview, overview of consumer sound etc work correctly. But with any details of Windows 8: home, pro or business there is no noise.

  I tried the following:

  Reinstall windows via USB, DVD - same issue, the installation drive in mode-same WIN7 compatibility question, installation driver followed problem update-even Microsoft, installation driver on the system to dual-boot (WIN8 and WIN7) - the computer find drive WIN7 and installed, but once again no sound. All other functions work fine except the sound. And the odd point is that the sound does not work only on the 64-bit version and only in the final version.

  Can you help me please to solve this problem?

  Thank you very much!

  Hello Toma,.

  I suggest you contact HP and get the latest drivers for chipset, as well as updates on the motherboard. You can also make sure to get the necessary drivers updated. You can check the link to contact:

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?cc=us&DLC=en&LC=en&product=3836067

  Let us know if you have more questions about Windows.

• Video playback issue with the latest version of Flash Player

  I use an old version of JWplayer "5.10.2295" in a large number of sites and it worked very well so far. Since the last version of Flash Player is released the videos cannot be played a second time on any browser on Windows. It works fine for me on Mac - quickly tested in Firefox (every night) and Safari (latest stable).

  Back to a previous version showed that everything was working fine before. I tried the last 13 and 14 of the archived Flash Player versions

  This kind of question has already been reported? Any change in the upcoming beta that could solve this problem?

  Thank you

  Albert

  This was bugs me because it was so weird.  I thought he must be a real problem.

  I finally understood what I was doing wrong in trying to replicate that.  The bug is in fact linked to looking.  If you leave the game at the end, you don't hit this bug.

  I filed this bug in your name and sent through to the engineering team:

  Bug #3835572 - JWPlayer [Injection] - If you're looking for reading courses, the video will not play a second time

• Safari issues after upgrade

  I upgraded to Sierra, but for some reason, safari will not load complete Web pages.  Don't know what to do.  Should I reinstall Sierra, should I wait for an update?

  Any help will be appreciated!

  Evelyn

  iMac (2011)

  Hello, this information should help you If Safari does not load a page or Web page elements are missing - Apple Support

• Safari issues - does not randomly

  Hello

  For some time I had experienced a problem quite annoying - and random - when running Safari. Occasionally, while browsing in Safari the program - and all of the operating system - becomes inadmissible. No matter how long wait, the system returns. No shortcut key shots don't work. The only solution once this problem occurs is manually turns off the computer.

  I ran EtreCheck to see if I have some plugin that is causing the problem, but I don't see anything obvious at the origin of this problem.

  I would appreciate a wise OS user to guide me through this problem and to help solve. Thank you for your time.

  Brent

  If you want to share the results of etrecheck that might help.

• Safari issues

  I can't use safari to get indexing still on the bottom of the page chrome shows all here is a screenshot of the same browsers different pages

  

  As you can see chrome displays the index of the page on the bottom but safari it appears below the bar low and you can't scroll down to get it?

  This is a web site design and best site test against several browser problem. Contact redusenet on this subject.

• Safari issues: (slow) search, (slow) tab

  (I know there are discussions on the 'Slow Safari' theme, but it does not seem to mention the exact problem, I have experience.) Please let know me if I should delete this discussion for this)

  Hello. I dealt with this problem for the last month. Here's my problem and what I did:

  When I type 'New tab' in Safari, it takes forever (5-10 seconds) until the tab appears.

  When I click in the address bar (were I search in Google and put into the site, I want to go to the) I takes forever (5-10 seconds) before I can write something.

  So, what made a person with experience of the computer (I have a lot of experience of Windows. ('New' on OS X)? Uninstall the program (Safari) and re-install. But it does not work under OS X I have re-installed OS X El Capitan. The problem has been solved, Safari was fast again. But, the next day, same problem. First I thought it was a car (because this is the program ONLY I had installed other than the pre-installed applications). But it wasn't a disc. Then I if it were my installation of Bootcamp (had no idea why, but why not try some remove), so I formatted the drive around and re-installed OS X El Capitan again. Safari worked flawlessly, I could install a player, always worked perfectly.

  SO: When I got to my work and installed the printer I use, Safari was slow again (as described above). It is not sensible, but after I installed this printer, Safari was slow and train again. Go figure!

  And YES: I tried all, delete this and delete this (cache, history, cookies, off iCloud for Safari, disabled the settings in 'search', deleted several files in the library and system as suggested no multiple sites). He done for me...

  I don't want to change the browser, because I really like the Safari and it connects to my iPhone and iPad. Can anyone help?

  Run this test and post the results here.

  http://www.etresoft.com/etrecheck

• Safari issue

  I have a website that I can't sign in. The Apple message tells me that it is encrypted... I select all the 'Apple send authorization codes allow', but still no luck... I have two Macs, a performer on El Capitan and Yosemite. I have the same problem with both.

  Some sites require a special client certificate for access. If you do not have this certificate, please contact the operator of the site to find out how to get a.

  Sometimes, the problem is caused by a web server that is configured to request client optionally certificates. Safari treats the request as required. In this case, other browsers such as Firefox and Chrome may be able to connect to the site, because they ignore the request.

  The first time you have been prompted for a certificate, you may be clicked on via a dialog box that has requested access to the profile for Apple in your keychain, which is used to guarantee the iMessage service. In this case, you will be able to regain access to the site in Safari by following these steps.

  Please, back up all data.

  Launch the Keychain Access application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The keychain items list with the name of the site in question and type "identity preference."

  Delete the item by selecting it and pressing the delete key. The next time you visit a site which requires an optional client certificate, exit the command prompt. You may need to do this several times until the server stops to ask.

• Compatibility issues with the latest Version of DAQmx

  This one has left me speechless, so I thought I'd go the bulletin boards.

  I am under some equipment that returns a voltage across a NI USB-6361. The company that hired me was using an older version of LabView (I can't tell you what, 2012 I think). In addition, they use DAQmx 9.5.5, that came with the USB-6361. (My problem is to get my a) hired computer USB and B) always keep all my VI DAQmx icons when I am in programming. If I roll back the ti software DAQmx 9.5.5, I lose my icons, but if I stay with DAQmx 9.9 I can see the USB to the MAX, but that's all. In MAX, I can't create a task or anything like that. It shows I'm using LabView 2013 as "Absent", and I've done everything I can think. Someone had this problem? How to fix it. I thought DAQmx 9.9 was supposed to be compatible with this unit. Thanks in advance for the help.

  Take a look at this:

  LabVIEW & DAQmx compatibility

  If you use a LabVIEW 2013 then you must have at least DAQmx 9.7.5.

  Kind regards, Jens

  EDIT: And Yes, 9.9 DAQmx must be compatible with your USB 6361

• OS Script issue with the new Version 6.6.2

  Hello

  Here's the scritpt for the information of OS, plus version his 'name' and 'osDisplayName' then '\n '. It goes to the next line.

  In the new version, he won't go to the next line, no change was asked after the upgrade or there is another syntax for the next line.

  Please let me know

  Thank you

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  VM = #! VMWVirtualMachine where osDisplayName like ' %x%'#.getTopologyObjects()

  result = 'name, OS name\n '.

  VMS.each () {vm->

  result += vm.name + ',' + vm.osDisplayName + '\n '.

  }

  Returns the result

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  It is in fact a minor bug in the definition of the results of the Script Console window.

  Your output of the script contains newlines "\n", but ignores the converter configured to the output of the script.

  I think that this display bug will be fixed in the next version.

  If you run the script from the command line using fglcmd, you can see the line breaks in the output.

  If you want to work around the problem in the Script Console, you can use the WCF definition editor to change 'Management Server/Commons/result Label' to use the rendering engine: "Management Server/Commons/Text Renderer: support the line breaks.

  Kind regards

  Brian Wheeldon

• Old issues of Activation of version (CS2)

  I have and older version (CS2) and had to re install. Now, I can activate is the product. Any suggestions? (Other than the upgrade...)

  cazdesignz,

  You must start over completely.

  Your own serial number owned worked with disc/download when there was still turning.

  Since Adobe has disabled the activation servers, no part of the old stuff can be used.

  You must go to the page linked to, then work your way through the new version (s) replacement of the or the applications you have, then download that/them and use the number to order replacement indicated for it/each to use during the installation. Don't forget the restriction of the premium design and the need for additional (Acrobat and GoLive) applications.

• Issue of Adobe Illustrator Version of CC 17.1.0 paved digital (64-bit)

  For some time, I work with the English version of Adobe Illustrator CC on a Windows pc with a Dutch keyboard (layout U.S. international). Now, that's the problem I meet: when I previously (in Adobe Illustrator CS4 which is) drew a box with the tool (M) Rectangle, I could enter numbers using the numeric keypad. Entry 2.5 resulted in a box of two years and a half milimeters (wide angle). Recording 2.5 (via digital) in Illustrator CC results in a box of twenty-five milimeters (wide). In other words: the point is neglected. My guess is that this has to do with the fact that the point (2.5) must be a comma in Dutch. When I use the regular comma (QWERTY keyboard), it does not. Therefore, the language settings.

  No idea if it is possible to work around this problem, except change language Dutch to English (Windows)?

  rnldvssr,

  You should be able to sort in the regional/language settings on the PC.

  See the screenshot posted by ton in #5 post in this similar thread:

  Re: I live in Scandinavia and have problems with commas and period in Illustrator

• Issue of Update Manager (version 4.1)

  I know, I know... I ask 1 million questions on these forums.  But! -in my defense, I walked into an environment that has no documents, no resources and no one with any real knowledge of what's going on. Ok? :-)
  
  Now, we want to implement the Update Manager in our environment.  I see that there are various updates and releases it to 4.1.  Is it a situation of having to download the original and then install other on it? Or can you just download and install the latest version?
  
  Thank you!

  Always use the version of the update manager that comes with vCenter Server. Take a look at http://partnerweb.vmware.com/comp_guide2/sim/interop_matrix.php to find out which products are compatible with each other.

  André