Safari issues after upgrade

Similar Questions

• Safari slow after upgrade of the El Capitan, Hideme install

  Why is Safari slow after El Capitan upgraded, or would it be Hideme

  You described your own next troubleshooting step.  Disable your proxy/VPN for a direct connection to the Internet through your ISP and see if your slow disappears.

• MacBook Pro(MID-2012):Issues after Upgrading to El Capitan

  I use Macbook Pro mid-2012 version. After upgrading to El Capitan, I am facing a lot of questions.

  (1) the DMG files does not open. said hdiutil attach has busy resource failed.

  (2) my Macbook Pro will not stop completely.

  (3) my systems updates install completely. They hit each other between installation (had to force quit)

  ' (4) ' about this Mac ' gets hit when trying to access storage tab.

  Any suggestions?

  Your MBP was working perfectly before the update?

• ProBook 4520 s camera issues after upgrade from Windows 7 to Windows 10

  ProBook 4520 s has problem with webcam after upgrade to Windows 10.

  Skype and other software do not have access to the camera.

  Drivers installed after the upgrade - universal HP (Realtek driver) looks OK in Device Manager.

  FIX:

  -Deletion of Arcsoft Camera sharing (installed on Windows 7 at first) in the Device Manager.

  -Download and install PC Camera Driver from Realtek Realtek support on site area:

  http://www.Realtek.com/downloads/downloadsView.aspx?langid=1&PNid=30&PFID=43&level=4&Conn=3&DownType...

  NB needs to restart.

  Skype now see camera and works OK.

  Solved.

• ASDM issues after upgrading to JAVA 8 on Macbook

  Hi all, I have a MacBook running and just put 10.10.2 upgraded to version Java 8 40. You'd know ASDM began to 'freeze' after that I connect to the device and ASDM is attempt to analyze the configuration. What happened when I hit an ASA 5545 9.3.1 running code (ASDM 7.3.1) but it does NOT occur when I type an ASA5520 9.1.5 older code running (ASDM 7.3.1). Odd. Anyone else seeing this? Sure enough when I drop Java to 7 build 75, AMPS works well again when I connect on these devices.

  As a test, I improved ASDM to 7.3.3 and moved to the top of the size of the heap by the release notes, but that did nothing to solve this problem. ASDM freezes again as his attempt to analyze the configuration (about 2 to 4 seconds after I login).

  For any help or suggestion would be appreciated.

  Thank you

  The f

  Looks like you hit the following bug

  CSCut04399

  ASDM crashes on MAC after upgrade to Java 8

  Workaround solution:
  None

• Performance issues after upgrade to view 5 on Windows 7

  I'm having a lot of performance problems after upgraded to vSphere 5 and 5 view connecting using PCoIP.  Interaction with the virtual machine are slower with either double or single monitor.  I tried all solutions different workaround proposed on the site of Teradici.  If someone has bugs or suggestions about how do to clear up things please answer.

  Add the following line in the vm config file.

  mks.poll.headlessRates = 1000 100 2

  It should solve your PCoIP lag problems, let me know what your results are.

• iCloud issues after upgrade to El Capitan

  I thank everyone in advance for the contribution to this issue.  I have an old MacBook Pro (13, 2.5 GHz Intel i5, 8 GB 1333 MHz DDR3)) and I recently upgraded from Yosemite to El Capitan (10.11.4).  I went to open my iTunes application and when I did, he said that "your music library iCloud session has expired' and asked my Apple ID and password.  I have entered the information and click OK.  The icon turns thought appears and at this time there nothing happens.  I work with other programs, but nothing ever changes with iTunes.  I finished by force he quit smoking (even if it does not does not stop not in the menu to force).  I restarted the computer, search for the updates and tried again with the same results.

  I went online and tried to login to iCloud via a browser and it worked perfectly.  My other devices (iPhone and iPad) both work very well, so I don't think it's a problem with log in information.

  I then went into system preferences to try to connect to the iCloud thanks to this icon.  When I click the iCloud icon in system preferences, I got the small multicolored wheel and again once it froze the program.  Some menus don't ever popped up.  When I had to force quit systems of preferences, he said that the application did not.

  I would like to be able to get for my music, podcasts and device management.  Any help would be appreciated.

  Patch T.

  Try each in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, restart again, normally. If this does not help, then:

  Boot to HD recovery: restart the computer after the ring, press in and hold the

  COMMAND and R keys until it appears the Utilities menu screen.

  3 repair the hard disk and permissions:

  When the Utility Menu appears, select disk utility. After disk utility charges select the disk out-bumpy entry (usually, mfgr. ID) of the list on the left.  In the disk utility status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (S.M.A.R.T. status is not reported on external drives Firewire or USB). If the disc is "verified", then select your OS X volume in the list on the left (entry indented under the entry for the drive), click the first aid tab, then click the repair disk button. If disk utility reports any errors that have been corrected, then again run repair disc until no errors are reported. If no errors are reported, click repair permissions . Wait until the operation is complete, then quit disk utility. Select restart from the Apple menu.

  4 reinstall the 10.10.4 update: OS X Yosemite 10.10.4 Combo Update.

  5 restart from HD recovery. Select reinstall OS X in the Utility menu, then click on the button continue .

• Safari crashing after upgrade to Safari 10 on El capitan

  I've just updated Safari via the App Store on El Capitan. Now, he opens for about 10 seconds and blocking everything as it starts to load the pages.

  I tried to delete the new version of Safari with sudo and dropping in the last version of (9.1.3) from a backup I made yesterday, but now it has the same and crashes at startup upward.

  I can not yet re - download Safari 10 in the App store because he seems to think that I'm updating. Even after you remove all apps Safari to my Applications folder.

  I put Sierra on an ext HDD to give it a try firstly to try to escape to one of these buggy, but I get it a simple update to Safari anyway.

  I searched google and it doesn't look like anyone has still the same problem.

  Anyone got any ideas?

  Safari loads all my tabs, but every time I do a right-click on any image to download it immediately blocks... no error "Safari unexpectedly quit" message is... I removed the preferences.plist Safari, I saw someone has suggested elsewhere, but which did not help either.

• Backup issues after upgrade to iOS10

  Dear users of Apple,

  I updated my iphone 6 more yesterday with iOS 10. Phone works quite well. But I have my phone backup problems. I usually back up my phone with my iTunes Macbook (Via cable and sometimes on wifi). But after the update to iOS 10 it seems that I can't back up my phone more. I don't know the real cause of this problem.

  1. I am not able to save my iPhone via wifi data in iTunes. (Previously it was not the case).

  2. I tried to back up my phone using the cable also. Also, I pressed "Trust" this computer, but I get this error message. Please see below.

  Also, I allowed my computer by disconnecting iTunes and logging back there. And yet I have the same issues.

  "iTunes could not connect to the iPhone because an invalid response was received from the device."

  Does anyone know what this answer is invalid can be?

  Do I have to change the settings in my phone or iTunes?

  Help please!

  Thank you very much

  Deven

  Did install you the latest iTunes? iOS 10 requires iTunes 12.5.1.

  Get the latest version of iTunes - Apple Support

• Equium P300-16 t: a few issues after upgrade to Win 7

  Hello

  I just moved my Equium P300 16 t from Vista to Windows 7 and everything seems to be fine. At least, everything works.

  Before the upgrade, I downloaded some Win7 drivers, and other files (things like Config fr.;) Hardware configuration; Card reader controller supervisor password utility. TEMPRO and others)
  Device Manager shows no problems I have to install one of these elements.

  I think that if it is not broken, do not fix. But I'm not sure about these.

  Another thing, after a series of updates from Windows, I lost the Windows event sounds.
  They work when tested, but not in use.

  All other works of his property, and that's the only driver Toshiba I installed where he fixed, but not good.

  Very grateful for any advice

  Thank you

  > I believe very much that if it is not broken, do not fix. But I'm not sure about these.
  If there is no yellow exclamation point and no unknown devices are visible, this means that you have installed all necessary drivers for don t be worried

  > Another thing, after a series of updates from Windows, I lost the Windows event sounds.
  Well, are the different selected sound for unique events? Or maybe that sounds have been cancelled? This should be checked

  > All other works of his property, and that's the only driver Toshiba I installed where he fixed, but not good.
  Well, you can also try to update the audio driver
  The laptop seems to support the audio chip Conexant CX20561 you can search for updates on the internet, but to be honest, if the sound works fine (except for the event sounds) so I wouldn't change anything personally I disabled all the sounds of the event on my laptop because I don t like this

• Connectivity issues after upgrade to 6.5.0 remotely

  Hello

  After the upgrade to 6.5.0 I had naturally create and update an account MyNetgear to use ReadyCloud on our 2 NAS boxes. At the beginning it was a headache because he beat absolutely all remote access (as others in the forum mentioned). However, I found that the main way to solve the problem was to leave ReadyCloud on both of our NAS devices and then join again (in addition to some full power cycling for luck). It seems that no device was able to make a clean break from the old normal upgrade process ReadyCloud accounts.

  One of the devices is now working to distance again, but when I try to log in second place that he just always says that ' a user space with the same name already exists. Change the local or the username ReadyCLOUD'.

  The problem with that is that the only account on the device is "admin". In addition, as new ReadyCloud connections use e-mail instead of user names addresses, I can't imagine that ever, I created an account with this "username". I looked through everything I can find in the admin page and I can't find other users anywhere. I even went through all network protocols in the settings window for our single part, and "admin" is the one account mentioned.

  I did reinstall an OS, but it doesn't help.

  Can anyone suggest anything? Thank you

  Default factory reset solved the problem at hand, as well as several other insidious old problems such as errors of certificate which browsers panic whenever I tried to view the page admin and downtime of 5 minutes about (something on this unit is not really older than a year or two).

  Effective it's good, it is difficult to recommend default resets to a lot of people. 18 TB of backup via a gigabit connection isn't funny. Yet, it is not for lack of Netgear 10Gbe is so crazy expensive.

• Wireless issues after upgrading to Windows 7

  I have a HP Pavilion dv6910us.  I've upgraded to Windows 7 without problem, but now every few minutes, I lose my connection Wireless for a minute and he reconnects on its own.  I connect to an Apple Time Capsule.  I also installed new security Trend Micro Internet for Windows 7 and thought that might have something to do with it, but when I disabled Trend Micro the problem still was there.  I tried the HP Wireless Assistant; that was of no help, and when I used the troubleshooter in Windows it could not find a solution.  Any help would be great.  Thank you.

  OK, after an update to the large windows and a reboot everything seems good bo.  Thank you very much for the help.

• BBM BBM issue after upgrade to 10.3.1

  After my upgrade has completed, I realized that when using BBM surveys I don't see what I'm typing before hitting the SEND key because the white band Milky superior of the keyboard is covering the dialog box
  If someone has noticed this? I have the Z30 and my friend has the Z10 and we both question.

  airwalkocta3 wrote:
  After my upgrade has completed, I realized that when using BBM surveys I don't see what I'm typing before hitting the SEND key because the white band Milky superior of the keyboard is covering the dialog box
  If someone has noticed this? I have the Z30 and my friend has the Z10 and we both question.

  Hi @airwalkocta3! Welcome to the community of BlackBerry Support Forums!

  Go to BlackBerry World and update your BBM.

• USB issues after upgrade to 12.0.1 12.1.0?

  I use a scanner to use high range I always use in my virtual machine (because there can be no linux drivers). Its a Fujitsu ix500. The host is ubuntu x 64 14.04 LTS. The guest is Windows 10 x 64. I ran this configuration for some time and have had no problem (since vmware workstation v.9). Recently I have upgraded from VMWare workstation to VMWare workstation 12.1.0 and scanner 12.0.1 enough work. The material of the scanner works fine, but when the scanner finishes analysis and attempts to send the data through the USB software Fujitsu software will just stay there and to block/spin forever. As a first step to be honest, that I don't blame it on vmware.

  I tried following things:

  1 reinstall the software of fujitusu

  2. create the new virtual machine and install fujitsu from scratch.

  3. has tried a new USB cable and plugged into another USB port

  These things has not fixed the problem. I installed 10 windows and the host and, of course, everything started working. Then I reinstalled ubuntu. I finally found a way to make it work. Replace the 3 USB USB 2.0 USB controller compatibility. I obviously don't want to keep like that since I use some USB 3 devices.  I hope that this problem is fixed in the next release, but until then what else can I do otherwise than lower compatibility USB?

  Hello

  Some problems with USB have been reported on the latest versions of the workstation and of the merger.

  See for example here: https://communities.vmware.com/thread/527472?start=0&tstart=0

  What I've seen so far is the recommendation to downgrade to the previous version (12.0.1) If you happen to come across this problem.

  Of course, also has its down sides because none of the issues resolved in 12.1 will be in this version.

  --

  Wil

• Dynamic issue after upgrade 5 to 5.5

  I just upgraded from first 5 to 5.5. Dynamic links that worked on a project of first 5 files do not leave the alpha channel works since the AE 5.5 first comps. Any ideas for a fix?

  Did you update to 5.5.1? Read here: Adobe Premiere Pro CS5.5 (5.5.1) update: bug fixes, including some for compatibility to Mac OS x v10.7 (Lion) "Premiere Pro workspace .

  One of the bug fixes:

  If an After Effects composition with one background color other than black was included in a sequence and acceleration GPU Mercury Playback has been activated, the transparency of alpha channel of the composition has been ignored.

  The download links are available in the post above; I don't think it is available via help > updates yet (but you can check).