Safeguards user-generated

Similar Questions

• user-generated event does not record

  I am having trouble with a user-generated event and hope that someone else has seen the same thing. I'm running LV 9 SP1, with a pretty standard structure of producer-consumer. The producer is event-driven and sends orders to the consumer based on the queue via the queues and the consumer information going back up the producer via the events generated by the user. In most cases, this works perfectly, but in a situation the event generated by the user is not registered by the structure of the producer of the event.

  The problem arises when the producer to place an order for the consumer advertising immediately generates an event. When this happens, the event is usually not treated by the producer - maybe 1 to 100 times the event is considered by the producer. My guess is that the user event is generated before the producer has completed execution of the event structure case who entered the command line of the consumer, which means (for some reason any) he'll never respond to the event. This suggests that event LV structures will not meet created events while they are running. Is this the case?

  I got around the problem by adding a 10ms before generating the user event (to allow for the case of the event at the end of the performance), but would really rather solve the problem if possible. Any suggestions?

  Thank you

  Baymen

  Thus, you do not have the result of the event of registry which contains this loop connected to any other other event that the loop of producer is correct?

  My first guess is that you raise the event and there is a State of race on the event and a loop is getting there faster than the other.

• Corrupted profile and the profile "User" generated by Windows

  The profile that I use "Shortie" is corrupted and the 'User' profile was generated somehow.

  This has happened after running a registry cleaner on the computer. The same registry cleaner has been run on this computer without problem.

  I have run the restore of the system twice and both times it came back with an error.

  In Control Panel, the user that Shortie is listed under user accounts, but it is not under c:\Users[user-name]\Music\iTunes\iTunes

  I also ran Scannow without showing error.

  I created another account and copied files, but I need to get the recovered e-mail.

  Could someone help to regenerate the account "Alexandra" and let me know about the account "user"?

  Can I rename 'User' for 'Shortie', or it is time to take back the HP computer again?

  Thank you.

  Very well! I get it... registry cleaners are _ but don't you think I knew that on my own?

  The question on this post was about the corruption of the profiles.

  I went to another Committee and got the management that I needed.

  No further assistance is necessary.

  Thank you once again t-4-2

• The question about the user-generated content

  Hello

  my application is a connected set of bbm and is also connected e-mail.
  It allows players to send each other messages while playing a game.

  is this considered to be generated by the happy user?

  If do what methods use in safegaurding a message?

  Not under the context in which you ask either at the moment.

  For bbm and email you could always encrypt the data, but I think it's overkill for this period of the APA.

• Interface user-generated loop for?

  var compLayerArray = new Array("Compsition 1", "Composition 2", "Composition 3");
  var layerControls = newArray();
  
  
  function generateWindow(){
  var layerPositionsWindow = new Window("palette", "Layer Positions", undefined);
  var layerPositionsGroup = layerPositionsWindow.add("panel", undefined, "layerPositionsGroup");
  layerPositionsGroup.orientation = "column";
  
  for(var p = 0; p < compLayerArray.length; p++){
          layerPositionsGroup.add("statictext", undefined, (p+1) + ". " + " " + compLayerArray[p].name);
          layerControls.push(groupOne.add("edittext", undefined, "0"));
  }
  
  var layerPositionsButtonGroup = layerPositionsWindow.add("group", undefined, "layerPositionsButtonGroup");
  layerPositionsButtonGroup.orientation = "row";
  var positionCancel = layerPositionsButtonGroup.add("button", undefined, "Cancel");
  var positionSave = layerPositionsButtonGroup.add("button", undefined, "Save");
  
  layerPositionsWindow.show();
  
  

  I was wondering if it is possible, and if so, how, for generating a user interface based on a loop for? I try to view each layer within a model in the user interface. I can do, because a static text does not require any kind of var. However, when I get to the line 11, I don't really know how I would go about adding a text edit under the name of each layer. I want store a value for each layer. Thank you!

  -Nate

  OK, I see what is happening. You have decided to add an additional group to the user interface within the same main layerPositionGroup. What happens in the loop to the #14 line. Actually, this has changed now the user interface model that was easy to read before to something more complicated to read. So since you have now "group #" then "GroupTwo #" you now generate a user interface with this model...

  Group 1 (statictext)

  GroupTwo 1 (statictext, edittext)

  Group 2 (statictext)

  GroupTwo 2 (statictext, edittext)

  Group 3 (statictext)

  GroupTwo 3 (statictext, edittext)

  .. compare to the original provision of...

  GroupTwo 1 (statictext, edittext)

  GroupTwo 2 (statictext, edittext)

  GroupTwo 3 (statictext, edittext)

  So when you browse the children in the group in the debug.onClick in the #34 line, you do not get anything because 'Group 1 (statictext)' doesn't have a second child, just one, the statictext. This interrupts the process. Not sure why it isn't throwing the error, but it is the cause of your problem.

  Group 1 (statictext) //Has 1 child

  GroupTwo 1 (statictext, edittext) //Has 2 children

  Group 2 (statictext) //Has 1 child

  GroupTwo 2 (statictext, edittext) //Has 2 children

  Group 3 (statictext) //Has 1 child

  Children //Has 2 GroupTwo 3 (statictext, edittext)

  Through this model is very different, because now, you must take account that you want to only read that the odd numbered children clues, those two children. So your onClick for loop must now include a check for odd numbers like that...

  debug.onClick = function(){
       var kids = globalVar.children;
       var kidLen = kids.length;
       var kidValues = new Array();
       for(var k=0; k		   

• Quiz of the sequence: variable user-generated?

  I want to create an activity that will allow users to enter their own tasks and then use the sequence quiz feature to order. It would be perfect if I could understand some items by default and then let them in their own institutions. Is this possible?

  One more thing: Please be aware that the Shape objects are not supported as drag objects or target objects with the Drag and Drop widgets.  This is because due to the way in which the Shape objects are designed in Captivate their registration point for snapping always being right in the upper left corner of the slide.  So, they don't give you behaviors slam predictable.

  Watching your screencast, looks like you are using a shape object as drag objects or targets.

  You can always maintain the LOOK of your interaction by using the Shape object as a background object and place a point box high above to act as the REALITY of the target object.  Just set the option preference to hide the target objects when running so that the highlight box does not appear.  In this way it will look LIKE the trail of objects are flapping in your shape object, but in fact they are flapping in the invisible instead nail box.

• generate the event user triggers two events structure

  Hello

  I would like to generate a while a user event that triggers events in two or more loops loop event.

  I have attached a non-fonctionnel project VI, so easier to show what I would understand.

  My experience is that user generated event cause that a case of Structure of the event, not both. Why? What if I want the two loops of the event that will be raised? How can you make with the user event?

  Maybe someone could explain this a bit deeper?

  Thank you very much!

  Kind regards

  PS. : new problem with forum upload file...

  So here's the VI in my dropbox:

  https://DL.dropboxusercontent.com/u/8148153/draft_to_show.VI

  Classic mistake.

  You need TWO 'register for events', the output of each class to a separate structure of the event.  Then it won't work.

• BUG: Windows Update, a negative impact on the user.

  This is the second time I had this problem, but this time I thought what is the problem.

  When Windows Update installs an update and requests that restart the computer and you can report up to four hours. The problem is, it ignores completely any request to postpone until after the first. If you select 4 hours, then 3 hours later tell him to postpone once again for 4 more, it will still restart regardless of your desire, an hour later.

  I entered things immediately when windows starts, and this glitch cost me an important download and data from two programs I've been multitasking since he ignored my requests - it wasn't just the right time to restart because of downloading and other circumstances. It is completely unacceptable that the windows to take it upon itself to restart without asking directly for the user. In a second window 3, I lost everything I work on and watched the "Windows applies an update" etc screen, then moments later it restarted.

  I had recently extended the restart, because I knew I'd be able to finish in the next 20 minutes or so. Either do take into account further postpone requests or if you carelessly ignore the desire of the user, generate a warning saying Windows PINGING in x minutes. Please save your work. I had no warning. Just bam, restart. Data of bye bye.

  Windows 7 Ultimate 64 bit

  So change "download updates up-to-date, but... "option then do not approve the installation of ANY updates unless you are ready to restart.

  Otherwise, WYSIWYG.

  PS: Do not forget this part:

  
  Related to security updates, your computer is dangerous before this restart occurs: it is vulnerable to attacks that exploit the problem has been corrected by the update that requires a restart.
  

  If the update requires a restart before your computer protected, why install if you are not ready to restart?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• ACS 5.4 ASA 8.2.5 disable AAA for the particular user

  Hello!

  I want to disable journaling Ganymede + for the particular user. This user is used only for automated (python script) pooling of vpn tunnel ASA (limited command set - permission on ACS) group to verify the number of users authenticated via VPN. The problem is that this user generate a bunch of logs according to authentication authorization and accounting on ACS. Is there a solution, disable Ganymede + newspapers on ACS for this particular user? Maybe it is possible to modify the AAA on ASA to not connect this particular user?

  Thanks in advance.

  Hi Pawel,

  You can create filters collection for that specific user. When you configure monitoring filters & Report Viewer does not record these events in the database.

  Navigate to: Configuration of the analysis > System Configuration > filters Collection > add a filter

  What follows is the attributes that can be used. You must use the user.

  -Access service

  -User

  -Mac-add

  -Nas - IP

  Example: We get several hits of ASA by 'user' and we want ACS to ignore it. Create a filter by using the user. ACS must now ignore any attempt from the IP Address of the NAS.

  Jatin kone
  -Does the rate of useful messages-

• access to an unauthenticated user credentials store

  Hey gurus,

  I do development for IOM so I asked my questions at Identitiy Management space initially but did not answer, then post it here because I wasn't able to post under security space. I hope you can turned on some light on my question.

  I have developed a plugin that works for IOM on a WebLogic, but the context for IOM shows that the user is authenticated (anonymous user generated an automatic registration). All the actions the system inherit that context. So when in my plugin is triggered, I try to read a CCA to some references, I get access Exception.

  My survey of generic nature that I would like to know if there is a way around this limitation? My idea is based on the fact that (my plugin) code is run on WebLogic server so that it is true a bit and should be allowed to read the CS. I wonder if I have to do any additional configuration for that to happen.

  As I am a novice for WebLogic, please forgive me if a question seems ridiculous.

  Thanks in advance,

  Philipp

  You must define a political permission that gives your code access to map of special credentials in the store of credentials (or finer level - for a given map and key). You set a permission of source code as explained in the documentation:

  Development with the Framework of Bank of credentials - 11g Release 1 (11.1.1)

  Don't forget to wrap your call to the API of the credentials store in AccessController.doPrivileged ().

  Dimitar

• How to stop adding files to source code control generated RoboHelp?

  I have a RoboHelp 10 project configured to use Team Foundation Server. When my user generates output (e.g. the preview or "generate... ") RoboHelp automatically try to fund the generated files (add or edit operations). I want only the source files to be added or removed automatically, not the generated output. He is tied up Team Explorer on the user's computer whenever it happens that hundreds of files are reconciled with TFS.

  How can I solve my problem?

  BONUS problem, I need problems:

  If the user has these verified files because RoboHelp requires (until my original question is resolved). If another user tries to build the same files (like I just did) on another machine, RoboHelp complains that the file is already checked out (no matter if the multiple payment policy is enabled). I have to then click OK in each file. How to stop this as well and allow multiple users to work on the same project?

  I solved this problem by hiding the! SSL! folder. I don't have a solution for the problem of multiple extraction, however although the cloaking mitigates the multiplicity of message boxes during the generation.

• Prevent users from mail

  Hi all
  
  I currently develop BEEP 11.1.1.5 reports based on Excel models.
  
  We noticed that most of our users generating huge reports.
  These reports are too heavy to be e-mailed, but end users don't know and they always try to the report and selecting 'Calendar Destination' Email.
  These e-mails are not delivered due to our policy of mail (send no more than 4 MB) and they all call me to find out why they have not received their datas.
  
  The solution to avoid it would be not to use FTP, but as they are end-users that they don't care.
  As long the will see the Email from 'Destination calendar' in the list that they would use it...
  
  So I would like to know if someone know a solution to remove from the list 'Annex Destination' Email?
  
  Thank you for your suggestions.
  
  Respect of
  
  Brice

  Hi Brice,.

  Well, I've studied this problem in BIP11g. Here is my conclusion:

  1. either not configured Email as a channel of distribution or
  2. you must specifically assign the permission of Planner for certain groups or users.

  There's no other way.

  Note that each WLS user who is authenticated in BIEE/BIP 11 g automatically inherits the role of Application BIConsumer and therefore permission to TWEET Scheduler. Thus, one suggestion is to remove this permission to role of Application BIConsumer if you don't want everyone to be able to schedule reports BEEP.

  concerning

  Jorge
  p.s if this answers your question please grant points, and then close the message. I am confident, that there is a definitive answer to 99.99%.

• Is the best tool for the creation of a review with Notes/comments-Dreamweaver user site? CMS?

  Hi all

  I am really keen to develop a site of online game and have a few questions of CMS/Wordpress/Dreamweaver, I hope that you all can help me with, I thank you in advance for your patience as I am new on the development of the site.

  I think creating a review site which will involve write me about 100 customers of online game and then getting users to download their comments/suggestions, etc. Each of the reviews would be updated monthly with his stats, performance and other details. Each review contains a review of the text, the review video and various images and screenshots. Integrate user generated content will be an important factor.

  I'm trying to confuse me with all the prep work round to ensure that I have the right tools and technology, that I need to succeed. A lot of people told me I should use Wordpress because of the nature of my site, or at least a combination of Wordpress and Dreamweaver - don't know how it works exactly. I don't want to be too dependent on Wordpress just because I want to be sure my site can be customized and cultivate and select advanted more value for visitors to my site. .. .i would like to have a members area only at some point in the near future.

  Please see below for questions running in my head:

  1. do I need a separate CMS tool?... ... who may be best to consider the nature of my site?

  2. should I use Wordpress instead?... .or a combination of Wordpress and Dreamweaver? -Why should I use a combination of the two?

  3 SEO is a factor important - does make a difference?

  4. my comments will need to be updated every month, so I will try to maximize the use of models, etc. I need to create a dynamic site in Dreamweaver or a CMS that will manage?

  5. what options are best to avoid as much as hand-coding

  Thank for taking you the time to read this,... .any advice/guideance would be appreciated.

  Thank you

  Harps

  Still a bit on the comment by John, WordPress sites actually pretty well on make Google providing your site contains a keyword rich, relevant and fresh content.  WP itself will be neither help nor hinder your ranking.  It's up to you to create good content, forcing the humans will be interested.

  As for the future, I think that you are on solid ground.  WP has been around for a long time and continues to dominate the market of CMS open source.  There are 58 million sites on WordPress.com alone.  This includes not everybody who self-host WP on their own areas.  Give it whirl and see where it will lead.

  Nancy O.

• Hive user Microsoft AD

  When you add AD users to the hive, many users can not be loaded.
  beectl download_ldap_user_data file UsersFromLDAP.xml profile profile_name worked right. all that users generated in UsersFromLDAP.xml file. And beectl give UsersFromLDAP.xml ldapbootstrap add_user couldn't add all users.
  So I used validate_directory_entry with no responsible users.
  But
  beectl validate_directory_entry [email protected] command for wordy profile profile_name commit returns the following error:
  
  Error code: EPUE-00711
  Cause: The specified name is already in use
  Effect: The specified security principal has not created
  Action: Specify another value

  most likely, you are trying to add users with the attributes that must be unique, but which collide.
  Hive things requires also unique are the principals and addresses, in order to verify that you do not have those colliding in the she refuses to add users. The log files will tell you more information.

  My gut guess is that you don't use voicemail hive, but have specified in your profile for VoicePrincipals card to an ldap attribute, and this ldap attribute is not unique (i.e. phonenumbers are shared). Easiest is to delete the profile for voiceprincipal mapping, rebuild the users.xml file and try a re - add.

  Richard

• Restrict access to the Page of the user in the relational database

  I have a relational database with two tables on a common ID field. The user can access all their entries in the child table with simple SQL queries and then select from a list of correspondence which of its documents records in the child table that they wish to change (i.e. ['ID'] ParentTable, ChildTable ['ID'])). Registration is then displayed using $_GET passed through the URL as parameter "recordID". However, when the user is connected and accessing a folder that matches the query, they can then enter another "RecordID" number in the URL and go to any record in the table child whether they are 'owner' of the record or not.
  
  I tried to put a statement of equivalence in the authorization user code to restrict the access to the child records users since ParentTable ['ID'] == ['ID'] ChildTable only when you are connected the user accesses the records they created previously. (In other words, when a user type a different "RecordID" in the URL, the ParentTable ['ID'] and ChildTable ['ID] are not equivalent.) The code that I entered in the authentication of the user generated by DW is as follows:
  
  If ((isset ($HTTP_SESSION_VARS ["MM_Username"]) & & ($row_ParentTable ['ID'] == ['ID'] $row_ChildTable))) {}
  ...
  
  Is still not accessible, even if tests show the ParentTable ['ID'] and ChildTable ['ID'] are not equivalent
  
  Any ideas on how to restrict access to the child records "unknown"? I'm sure it's relatively simple, but I'm having trouble to get through this obstacle.
  
  Thank you

  Thank you, Philo. In fact I got it to work by initializing a session variable of tha parent ID of the table and comparing it to the variable ID of child table, then using a header redirect in case of inequality. Part of my problem was where I put the code in the page. Anyway, it works now. It seems that the answer is always just after you have posted the question.