said always invalid extra data?

Similar Questions

• Bootcamp AMD update / update of GPU said always up to date.

  If this is not a new installation and I don't have an apple update in a long time. I mean... For a long time, so today when I saw the soft software update Apple pops up saying that I had an update, I'm super excited. I installed the update first graph (after you have uninstalled my previous gpu driver). It is installed, and then he said that it was an update of bootcamp ('supports 5 k on windows, addresses the problem of blocking' etc.). I installed as well. Now she she wants to reinstall the GPU drivers. I moved and you did... Now, he wants me to install the bootcamp update. I did it once again. Now, he wants me to redo the GPU DRIVERS. Alright... and now we are back to it asks me to install the bootcamp update. What is going on?

  In addition, these drivers seem to be kind of old. The driver date says 09/02/2016. In Radeon settings, he calls the 15.11. These are former pilots.

  I use an iMac k 5 from 2014. GPU is AMD 295. Windows 10.

  Save me LonerT!

  Having this same problem too, same system configuration (2014 5 k iMac, 295 AMD, Windows 10), only I didn't first uninstall the previous driver GPU. 09/02/2016 are the new drivers of Boot Camp from Apple standards. I think that the previous engines have been since October 2015.

  The update installed an AMD Radeon settings in the status system in addition to the AMD Catalyst Control Center bar. Everything seems to work fine graphics-wise... the only problem is with the infinite loop put up-to-date problem with Apple Software Update.

• My Dreamweaver is uninstalled, application manager said that it is always up to date. How can I install

  My Dreamweaver is uninstalled, application manager said that it is always up to date. How can I install it again?

  Hi Birra96

  Please confirm that there is not an uninstall program to run:

  • Under Windows , you can uninstall from the Control Panel.
  • On Mac OSX , look in the folder Applications > utilities > Adobe Installers for a link to Uninstall Adobe Premiere Pro CS6 .

  If found launch the uninstaller and see if the Adobe Application Manager allows you to install.

  If you can't always install, use the Adobe cleaning tool here http://www.adobe.com/support/contact/cscleanertool.html.

• Add or remove programs? Uninstall it says invalid or data has been corrupted, will not continue.

  Add or remove programs. The program I want to uninstall it is Printmaster 150.00 MB. I tried to uninstall it but uninstall it says invalid or data has been corrupted,

  will not continue. How to get out he computer?

  If you have the original installation media, a method that often works when an uninstall program is corrupt is to reinstall the app and then uninstall it.

  Otherwise, you could try free Revo Uninstaller or see http://ths.gardenweb.com/forums/load/comphelp/msg081415488395.html (unfortunately, the link to the manual uninstall instructions doesn't work; support for Broderbund software has been adopted by Encore.com, the search engine it leaves something to be desired; however, you can ask for help in a forum yet http://forums.encoreusa.com/).

  How to contact Technical Support (it is not clear if all Printmaster versions are still supported; I would try telephone assistance rather than on the web):
  http://forums.encoreusa.com/TM.asp?m=24071&mpage=1&key=%E5%B8%87

  The following (below the line *) comes from a post on the support forums forum moderator yet.  I have not linked to it because earlier in the post, it is suggested to use a registry cleaner in the manual uninstall.  Certainly, I do NOT recommend to use any registry cleaner.

  *************************************************************************************************************
  NOTE: this message does not apply to PrintMaster 2.0 or Print Shop 2.0.

  Broderbund programs, including (but not limited to) print shop, PrintMaster, designer of Scrapbook memories of creation and creator of calendar, are installed in the Program Files folder where most of the software are installed. However, many Broderbund programs will install also files and folders in other places on the hard drive.

  When one of these programs of Broderbund is uninstalled because it is suspected that the installation is corrupt, it's always a good idea to make sure to manually delete all the files and folders stored on the hard drive that are not deleted automatically during an uninstall normal - to ensure that all corruption is removed before the program, is reinstalled.

  Here are the paths of the additional folders where Broderbund software is commonly installed:

  Windows XP: C:\Documents and Settings\All Users Data\Broderbund logiciels\Print

  and

  C:\Documents and Settings\ [your user name] \Local Settings\Application Data\Broderbund logiciels\Print

  WinVista/Win 7: C:\Users\All Users\Broderbund logiciels\Print

  and

  C:\Users\[your-username]\AppData\Local\Broderbund logiciels\Print.

  and

  C:\ProgramData\Broderbund logiciels\Print

  **********

  PrintMaster address books can be accessed from and saved to the BOOKS folder that is a subfolder of the folder prints shown below (PrintMaster address books may be accessed from or saved to the Documents folder)

  Windows XP: C:\Documents and Settings\All Users Data\Broderbund logiciels\Print

  WinVista/Win 7:Print and C:\Users\All Users\Broderbund logiciels\Print logiciels\ C:\ProgramData\Broderbund

  (As you can see, when PrintMaster address books are registered under WinVista and Windows 7, they are saved in two files).

  For example, the address for PrintMaster 18 books would be saved in these folders on WinVista or Windows7 computer

  C:\ProgramData\Broderbund Software\Print\PrintMaster\18.0\Books

  C:\Users\All Users\Broderbund Software\Print\PrintMaster\18.0\Books

  To make sure that saved the address books are not deleted during the uninstall process, they must be saved prior to PrintMaster is uninstalled. When these address books are restored, it will be necessary to restore these in the same two folders address books - because an address book will not appear in the file. Open list, if not in the two files.

  Address books print shop can easily be stored in the Documents folder. So, if you have registered your address books in the Documents folder, it is not necessary to save the address book before you uninstall the print shop.

  **********

  Files that control the Project Gallery and the Art Gallery are stored in the folders of ART PROJECTS & which are subfolders of this folder to print

  Windows XP: C:\Documents and Settings\ [your username] \Local Data\Broderbund logiciels\Print

  WinVista/Win 7: C:\Users\[your-username]\AppData\Local\Broderbund logiciels\Print.

  For example, ART & for PrintMaster 18 PROJECT files would be in this folder on WinVista or Windows7 computer

  C:\Users\[your-username]\AppData\Local\Broderbund Software\Print\PrintMaster\18.0\PROJECTS

  Because these files can easily become corrupt if the video card driver is out of date or corrupted, the program folder that has been uninstalled (in this case, the folder 18.0) must be removed before the program is re-installed. It is completely safe to delete the folder PrintMaster - because a new facility this 18.0 folder will be performed when PrintMaster is uninstalled.

  If there is only one version of PrintMaster installed on the computer, the PrintMaster folder in this example could also be deleted safely.

  **********

  It is not absolutely necessary to remove the Adbook.exe file that controls the program PrintMaster addressbook. But it's always a good idea to know that this file is installed in this folder

  C:\Program Files\Fichiers Files\Broderbund\UMM

• Invalid property Data

  Having a problem when I try to export from Premiere Pro (CS4). The main files I'm importing are .flv (Sorenson H.263 - btw, anyone know why it will not find data media for .flv H.264?), 29 970, 4:3, 640 x 480, etc.. I tried to change these file specifications and generating new .flvs - codec, frequency of images, size, proportions, audio codec and sample rate, etc - to get a better match with sequencing presets, but nothing is working. I always get "Invalid property data" and then it crashes.

  My computer specs:

  Custom Intel Core Duo CPU

  6400 @ 2.13 GHz, 1.99 GB of RAM

  Windows XP SP3

  Disk hard - 1 x 195 GB NTFS w / 106 GB of free

  Radeon ATI graphics processor

  RAID controllers: Intel (r) 82801 GR/GH SATA RAID Controller and Silicon Image SiI 3114 SoftRAID(4) 5 Controller

  Writer HP DVD Writer 840y

  2044 MB virtual memory for all readers

  Let me know if I missed some relevant info. I am new to Adobe CS4, but so far, there seems to be a lot of hassle. Can anyone offer any speculative ideas as to what could happen?

  Thank you

  In a configuration of HDD 3 x, the first disc is used for the operating system, programs and possibly the pagefile (virtual memory in Windows). Are the other two HARD drives that are used, one for the media and the other for the project and Scratch disks.

  Video editing is highly I/O intensive. The ability of the computer to access several HARD drives for multiple tasks is very important for releasing things. If everything is on a physical HARD disk, then the computer has been waiting on the reads/writes, that cannot come at the same time. Worse still, things get must we have all partitions, because the OS think that she handles several physical HARD disks, but is only dealing with the logical HARD drives, and he does not understand why it takes so long.

  This is very simplified, but it all about data access.

  Good luck

  Hunt

• I've just updated to a since a XP2 XP3. I'm always up to date. (error 0 x 643)

  original title: I've just updated to a since a XP2 XP3. I'm always up to date.

  My current problem is a 0 x 643, when you try to upgrade to KB110806. I just worked around a SRX1158966073ID.

  Any help would be appreciated.

  A KB976982 has been created to resolve corruption issues MSI software update registration automatically, the KB includes an automated Microsoft Fix it 50123 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/976982>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MS fix 50123.msi.

  `~`

  http://support.Microsoft.com/kb/943144/en-us> can help in case used to install updates and you have repaired/installed Windows on an existing Windows System.

  It probably won't be your solution, but it is easy and does not hurt to try.

  07:43:1208/01/11

• Oracle will always create a Data Guard certification?

  Oracle will always create a data protection Certification?

  If so it would be more than a "HA" - high availability.

  or would it only be on Active Data Guard.

  Thank you

  We have a Data Guard Admin certification soon. Unfortunately, I have not closer than that date.

  https://blogs.Oracle.com/certification/entry/0856_31

  Kind regards
  Brandye Barrington

  The Forum Moderator

• Visual Studio - invalid license data

  We try to put an AppStack of Visual Studio 2005 and Visual Studio 2010. All work with the original install and the program opens fine. Clog the AppStack and assign it to a new user for tests and both version open a pop-up message stating "invalid license data. Reinstall is necessary. "

  All the world has overcome this problem?

  Yes, seen this problem with Visual Studio 2010 when entering on an own virtual computer.

  The workaround is to capture Visual Studio on a virtual computer with master/base image that is used for deployment. It worked for me to overcome the problem of license during the assignment of the AppStack.

• I downloaded creative cloud with CC Photoshop, Premiere Pro CS6 and DC Acrobat install however Premiere Pro does not open. When open the button is on the other app, the first Pro app said only "up-to-date". If I click this, nothing happens?

  I downloaded creative cloud with CC Photoshop, Premiere Pro CS6 and DC Acrobat install however Premiere Pro does not open. When open the button is on the other app, the first Pro app said only "up-to-date". If I click this, nothing happens?

  check your directory program files adobe > first pro cs6 > first pro.exe file.

  (restart the cc app will probably also work.)

• Open CC app, said installation up-to-date, but crashes to zero, is not updated.

  Open CC app, said installation up-to-date, but crashes to zero, is not updated. Have rebooted, turned off the virus apps, but am not expert level. Windows 8.1.  Thank you!

  Hi Mark,

  Please, try the following steps:

  (1) uninstall Adobe CC (https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html)

  (2) restart the machine.

  (3) install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Reference: https://helpx.adobe.com/creative-cloud/kb/Error_Code_2_failed_update.html

  Kind regards

  Sheena

• I pay for Adobe photography CC every month. I did the most recent downloads, but my Lightroom said always LR5. I don't understand? This is not the latest version of LR.

  I pay for Adobe photography CC every month. I did the most recent downloads, but my Lightroom said always LR5. I don't understand? This is not the latest version of LR. It also seems that adobe has made it more difficult to speak with a real human CSR.

  Since Lightroom 2015 CC is a new product, it will not show as an update to the previous. Click Install next to Lightroom in the creative Application of cloud Manager. If you do not see 'install' by Lightroom in the application manager, please first try to log out and return to: connect and disconnect from the creative cloud desktop application

  Guinot

• I fear there is a fake site looking exactly like Mozilla. He told me always up to date. Whenever something bad happened. I could not to Google.

  Over a period of several weeks, I get updates of Fire Fox download requests. The first time seemed strange, asked me to download 3 extra things, 1 toolbar, the other 2 I forgot. My computer developed so many problems, I had to spend 12 HOURS 6 Trojans and 1 worm the deletion from the register. Next time, I couldn't Google, spent hours to reinstall IE. The last time ruined G-Mail, IE spinning in circles, once again the relocation and restoration of the system. I've been clicking on which should show the origin of the update and a very authentic site resembling Mozilla rises. What I don't like is she insists to change my search engine default, among many other things. I tried to contact support and ask questions through it, but could not do empty to submit. I'm afraid to download more updates to Fire Fox. I had to spend hours on reinstalling, cleaning, etc. I finally had a white to submit a question and typed, basically, what I have here. When I submitted it, it disappeared, and the next page says "Service unavailable". The pages look very detailed and authentic, but I fear that someone has been able to duplicate a web page of Mozilla. To get here this time, I went to programs in the control panel and clicked on the hyperlink for the support. The page looks very much the same as another but the text in the windows of several (PC windows, etc.,) are darker and smaller. I think that I may need uninstall FireFox but don't know if I'll be able to download from the authentic site to reinstall.

  I don't know that this is not a large company. Like a lot of malicious Web sites to make themselves look official, but if you scroll to the bottom of the site or to read the warning, it is more likely, said the Web site is not affiliated with Mozilla. What they want to do you is to download their fake update installer. The update installer is actually a bundled Installer, which means that they put ads in the installer as optional software that actually does not come with the thing, the installer is supposed to be the installation. They earn advertising revenue from this. Do not trust everything that appears randomly inviting you to update something, if you browse a Web site. They are not hackers usually; they just want the money. I advise to download something of these Web sites or the other.

• Impossible to define a synchronization (new sync key is ALWAYS invalid)

  When I try to configure my office firefox account, I always get a "BAD KEY RECOVERY" message on the Synchronize tab.
  Initially I used by key backed up, but it was not valid.
  Then I deleted the synchronized data account, account deleted, create new account.
  Just after setting up the account of new finish, every time after the windows that display that sync will begin soon, when I go back to synchronize the window that I ALWAYS find 'bad key recovery' message. I read most of the items of available synchronization, none has solved my problem.

  BTW, I agree that it should be a warning when you enable FIPS mode or when Sync is activated. It took me hours to understand the problem...

• HP4645: HP 4645 - change the router for Humax and now always invalid password

  Hello HP / person

  Please help me, I change my ADSL internet fiber and provider gave me a router Humax. However, when I tried coonect Assistant wireless via HP4645, it always show me "invalid password" this wireless I use 5 to 6 devices so I'm very sure that the password is correct.

  I tried putting the Cd and it ran however it n SSID inavailable

  Please help me before I change the internet from ADSL to internet fiber with new router it works just perfect.

  Hi @c13pan,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your HP Deskjet Ink Advantage 4645 e-all-in-one printer connected to the new router. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that this can be frustrating, we should be able to get this to work for you. Looks like the printer must hang on the old settings or trying to connect to the wrong network.

  To correct this problem, try the following steps:

  Restore the default settings network settings.

  1. press on the wireless button to access the menu of the status of wireless.

  2. press the button next to settings to access the settings menu wireless.

  3. select restore default settings.

  4 confirm the selection to restore the default values.

  Source

  • Before you reconfigure the wireless, make sure that the SSID is not hidden.
  • If you have a dual band router, rename the network 5.0 GHz and the name of the network is unique.
  • Make sure your computer is on the 2.4 GHz network when you try to reconfigure the wireless.

  To confirm you are on the same network and the password is correct, please use the printing and scanning doctor.

  HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning. Download and run printing HP and doctor Scan quickly and automatically multitask resolution of known issues for this problem. When you click this link, HP Print and Scan Doctor is downloaded using the download of your Internet browser capabilities.

• Debug the invalid token (date OK)

  Hello

  I'm trying to get my debug token to work.

  I created & installed my token in accordance with the instructions provided in this article. However, on my PlayBook, debugging token appears as invalid (' Valid: No. ").

  I checked the date on my PC and my PlayBook (I even tried the PlayBook setting a few days in advance): they are both OK. Also, I used blackberry-debugtokenrequest-check and he didn't tell me something unusual no more.

  So, what could cause this problem?

  Are you using the PIN exactly as there are shown on the PlayBook (do not convert this number to hex)?  The number would already be in hexadecimal.

  The date on the PlayBook should be synchronized with your PC.  If the date of the PlayBook is prior to the date of creation of a token of debugging or 30 days after the time of creation of a token of debugging, it will be invalid.

  Can you confirm these two?