Similar Questions

• Satellite 3000-400-Accupoint does not work after installing Windows XP

  Hello

  I installed Windows XP (SP3) on my Satellite 3000-400, but the Accupoint II trackball does not work. It is not mentioned in the hardware Manager and I can't find a driver.

  Sorry for my bad English.

  Hello

  Do you mean that you can not use the touchpad buttons too?
  Hmm, sounds a little like hardware delivers what do you think?

  Have you tried to install a driver for touchpad?
  I didn't find the driver for the touchpad for Satellite 3000-400, but I found a satellite 3000-504 (the drivers are placed in the Archive)

  Try to install this driver and check if it helps.

• Problem upgrading Windows 2000 with my Sat 3000-400

  Hello guys,.

  at home, I have a Sat 3000-400 with Win ME for my own. Now I want to Win 2000 and a friend told me I should be careful in what order I should install the new drivers.

  I'm a normal user so I don't know where I could find this information. Could someone help me?

  Hi campino,.

  If you want upgrade ME to 2000, you must be careful about the order of installation of driver.

  I found a very good faq on the site of toshiba UK. It is a command the entire facility for many machines.

  for sat 3000-400, it is:

  1 chipset Driver
  2. video driver
  3 Intel SpeedStep Applet
  4 driver Modem internal
  5 LAN Driver
  6 infrared driver
  7 QFE
  8. smart Media utility
  9 easy Button Software

  Here is the link

  http://UK.computers.Toshiba-Europe.com/ and go to Support & downloads, then go to the knowledge base.

  Faq No. 00000007d2DGA.

  I'll hope this helps!

  BOB77 Bye

• Satellite 3000-400 CD drivers

  Please, where can I get drivers XP Pro for the carpet * 710 UJDA CD ROM/DVD for mt Satellite 3000-400? The original operating system was Windows ME and I upgraded to XPPro, but now, the reader does not see what makes impossible loading programs etc.

  Hello

  I m not 100% sure, but AFAIK doesn't support firmware Toshiba drivers CD ROM/DVD
  However, I found a page with some information and links.
  Take a look at this.
  http://www.cdrom-drivers.com/drivers/75/75433.htm

  Good luck

  Good bye

• Sam 3000-601: BIOS needs to use Linux

  Hello

  I am looking for a newer or older BIOS for my laptop.
  With Version 2.30 of TRAD, I don't get the nvidia card to work properly with linux, and with the original BIOS it did.
  There may be a solution for this problem of different, but I would test with an older version.
  So can someone tell me where to download it!

  Thank you, Florian

  Hello

  Well, the most recent BIOS, you can download form the Toshiba site.
  http://www.toshiba-tro.de/subpage/BIOS.html

  But you can t download an old because it s is not possible for ordinary users to downgrade the BIOS. This means that the ASP can install the older version of BIOS.

  But why are you sure that the Nvidia graphics card doesn't work with old BIOS?
  As far as I know the graphics drivers are designed only for operating system Windows and NOT LINUX because Toshiba doesn't support the Linux operating system.
  In this case I don't know if he wants to work m.

  Good bye

• Sam 3000-514 - error at startup

  Hey there,

  following error message is displayed right after I hit power and keeps coming back time and time again (no chance of loading windows):

  For Realtek RTL8139 (A/B/C) TRL 8130 PCI
  Fast Ethernet Controller v2.12 (010425)
  PXE - E61: Media test failure, check cable of
  PXE - MOF: Exit PXE ROM

  I have really no idea what to do, so please, any help is appreciated. Oh and I tried a full recovery, but basically, it won't make a recovery because of a score editing... I partition the hard drive into two partitions, but I really don't see why this is a problem...

  Thank you
  Angeli

  Hello

  I presume that the LAN is set initially in boot priority.
  Enter the BIOS settings and HARD drive as first boot device.

  Good bye

• Sam 3000 - X 4 memory reporting in WIN XP incorrect

  I installed two 256 memory cards in slots 1 and 2. The Bios reports correctly, check the diagnosis reports correctly, BUT windows XP Home Edition says that I only have 256 and a location empty? I have two-way cards, no difference. I ran one of these ' we'll check you memory for you thingys from a provider memory and he says I have an empty slot. Any ideas?

  Hello

  I'm not 100% sure but it might be a weird error.
  If you right click on my computer and click it left properties how much memory windows reports?

• Failure of Toshiba Portege Z30 Accupoint and Touchpad

  Hello Toshiba users

  I bought a new Toshiba Z30 in may 2015 from a vendor on ebay in Australia online. Great laptop.

  About 6 months ago the Acupoint began to move its own, so I disabled it in the settings of the mouse and used only the trackpad.

  Now the trackpad works more correctly. The laptop will recognize and respond to button clicks. However (intermittently and frequently) the cursor no longer meets the entrance of the trackpad itself.

  I tried to uninstall the drivers existing and windows that allows to install its own, but it did not work.

  Because it is intermittent, I wonder if it is a hardware problem?

  Any advice on how I could fix this?

  Thank you

  Ralph

  Solved

  There are 10 small black screws on the underside of the laptop. One was missing and the others were released.

  I have one of the screws placed at a strategic location near the trackpad and slightly tighten all screws.

  This seems to have solved the problem I had with the accupoint drift and the trackpad that wouldn't work at all.

  I'm happy to have solved this problem myself.

  Hope it helps you too.

  Ralph

• Weird problem of satellite 3000

  I have 2 laptops Toshiba Satellite, both for professional use,
  the 3000, however, my pride and joy. I work in a very exposed position and people actually stop and ask myself... What is the brand of this laptop? Recently, I've updated
  for XP Pro the 384 MB of Ram. However, the machine was still faster.
  Until last night, at home, I wanted to work. I have
  could not start windows. Finally a Dos window pops up saying "not properly connected IDE cable", as well as a series of short beeps. I took the laptop first thing this morning, tonight, what I was told that the IDE controller jumped because of a power surge, and I so need a new motherboard. Is it possible? I'm afraid that they spoil this machine. This laptop is much faster than Compaq P4 my husband.

  HI Muzikatz,

  I also have a Satellite 3000 and it works correctly. I love the Sat 3000 because it's a well designed laptop which is with its integrated components very fast and strong. In our society we have about 10 Sam 3000 in use and we havn't a hardware bug again. In my opinion your IDE cable maybe loose by a blow or something else. Another problem might be that your RAM upgrade it damaged.

  In my mind there is no other explanation for this problem. Maybe you could visit a Toshiba service partner to solve the problem. On the following site, you can find under Support / downloads - homepage to support a request for Toshiba Service partner
  http://EU.computers.Toshiba-Europe.com

  Bossi Bye

• _Capture image questions HPDM4.5 SP4 (Errorcode-400 could not connect to the shared folder)

  Hi, hope someone can help me.

  I'm under HPDM 4.5 SP4 on a member of the domain Windows 2008R2 SP1 x 64 server.

  I try to use the model "_Capture Image" on a light field customer non-member HP T610 (Agent version: 4.5.3360.18502, version of the device: 6.1.7601.286)

  Configured the master repository, used Filezilla server and did a test on the FTP and the Shared folder.

  FTP path: ftp: / //hpdm ("C:\Inetpub\Ftproot\HPDM")

  Path of the shared folder: ------\hpdm

  Bin play with the settings and read this for a day, but no mather what I try, whenever I use the model I get: ErrorCode:-400 could not connect to the shared folder.

  Edit: when I run the model, I see a folder created in "C:\Inetpub\Ftproot\HPDM\Repository\Images\test1_1", but the HP Imaging tool displays some time: set up the share folder. Finally the error task and the test1_1 folder is deleted.

  Please advice

  Hello to all you readers looking for the answer to this...

  @ jeff_x thank you for your response.

  1. all units has no (I tried 5)

  2. now 4.5.3660.16798 running and it works

  3. all thin clients running DHCP

  4. all thin clients and server hp - manager already running in a serparate network.

  But the solution was simple. Had to delete all software HPDM

  Fact Download Manager-cutting (sp60327.exe) HPDM and HPDM SP4 (sp64049) < at="" max="" 200kb/s=""> >

  Installed from scratch and configured the master repository with:

  Name of the repository: master repository

  Server address:

  FTP (FileZilla Server, created a user 'anonymous' without password, shared the folder c:\inetpub\ftproot\hpdm to this user and pressed the button "set as home dir")

  User name: anonymous

  Password: (blank)

  Path: simply put ' / '.

  Protocol of shared folder settings

  User name: \user (created a local user for this purpose and placed it in the local administrator group: Administrators)

  Password: (what you do to the top when you created this account)

  Path: just put in "hpdm.

  Hit test and see if it worked for you. BTW, the test button is not the Holy Grail.

  There should be a better manual to set this up!

  I hope that with this info to help a person looking at the same issue 400 error!

• Re install Win XP but no product recovery CD

  I am trying to sort a Sam 3000 friends for him that runs very slowly. I think that his daughters have loaded many software on unscrupulous web services which seems to be very difficult to uninstall. I have around 70 processes that run the task to monitor! On a normal start with nothing installed, it should be more than 25.
  I upgraded to 128 to 384 MB RAM, which has improved him think a little, but I need to get rid of all harmful programs. I was thinking of doing a new installation, but I do not have a recovery CD ROM product, so my question is can I install Windows XP Home Edition on it from another PC I have but use the license key provided on the sticker attached to the bottom of the laptop? I also thought to do a system restore, but I don't know how the restore points on the laptop and that they would go far enough back anyway. The latter is my preferred method, because it is easier, of course.

  Any advice would be appreciated

  Jez

  Hi Jez

  You are absolutely right. I think that the reinstallation of the OS is the best solution because it is not easy to uninstall it properly. Parts of the software remain hidden in the registry entry.

  Upgrading RAM is always good and the reinstallation of the operating system, it will work faster. You can use any CD of Windows XP Home edition to install the OS, but the license key is just for the original recovery CD. Install it on your CD and after that search for the drivers on http://eu.computers.toshiba-europe.com or use Tools & Utilities CD to install the necessary drivers.

• Where can I get a replacement key?

  I have a satellite 3000-400 with a function key [Fn] Summit which is broken. Where can I get a replacement key top?

  I know, you can not buy or order single keyboard parts just the entire keyboard. I recommend you check out eBay and see if you can buy used keyboard and replace it. Replacement procedure is not complicated.

• Increasing problems to access web pages in Safari or Chrome

  Hello. I have a Mac Mini 2.5 GHz, 4 GB RAM, 500 GB HD; running Mac OS x 10.11.2; Safari 9.0.2; Sophos AntiVirus Home Edition 9.4.1; Chrome 49.0.2593.0 dev (64-bit).

  Several months ago, I started to have problems of access to some web sites, namely OpinionWorld and your voice. I would get an email from them with a link, like http://dkr1.ssisurveys.com/projects/start?psid=s_LXqAJmxx3JVOk_yTSTvgBEHjCAUQLr>, and when I went to access I got error:

  400 bad request

  Your browser has sent an invalid request.

  so that I could access these sites from my mother did investigations using his computer and Windows 10 machine. I had the same problems in Safari or if I pasted the links in Chrome. After some time I also started having problems with other websites such as Amnesty International. I would like to click on a link such as al http://www.amnesty.org.au/action/action/41035/?utm_source=FBPAGE&utm_medium=soci & utm_content = 20151220043000 & utm_campai... > and he'd make the same error 400 Bad request. I took it to the Genius Bar for an appointment and after a long period it check and tries to connect to some of these sites from another Mac and my mom on my Mac Mini account, that the Apple employee said it was a problem with sites and not with my computer, but problems encounter on the other computer and even on my mother's account were different. On the other machine, it seemed that someone else had bought the areas OpinionWorld and your voice and I forgot what happened account of my mom, but it wasn't a 400 error. Also, it didn't explain why I was able to access it on a Windows 10 using Chrome for Windows machine. Also, it was just the links OpinionWorld and your voice, not links to Amnesty International etc.

  Sometimes, I would have similar problems with other sites. Sometimes I could open in Chrome but not Safari, or if I clicked on the link it won't work but if I pasted the link and press return it would work. More recently, I was not able to access the site with Safari iTunes feedback feedback/itunesapp.html >, he just said:

  Bad request

  Your browser has requested that this server could not understand.

  Reference #7.ebb7d117.1450593610.0

  I receive for several sites these last time. Also although when I accessed this site through Chrome, it worked, when I had finished my comments he tried to go to http://www.apple.com/feedback/itunesapp_thankyou.html> where he got another 400 error but when I went there now it worked.

  Also when I tried to access the first link in this post just recently I received:

  403 Forbidden

  Request prohibited by law.

  in Safari. Previously I would have uninstalled and re-installed Safari and Chrome, but apparently it is like an option with Safari.

  Can anyone suggest what should I do then? Thank you for your consideration.

  Can anyone suggest what should I do then?

  He doesn't know what is the problem but "Sophos" is capable of anything beneficial and his presence will only complicate troubleshooting. Remove it. Back up your Mac before making changes to its file system.

  Use the Remove Sophos Anti-virus program. It will be installed in the Applications folder on your Mac, unless you have moved or deleted. In this case, follow the instructions in uninstalling here: https://www.sophos.com/support/knowledgebase/122710.aspx. Ensure that its eradication is complete and irrevocable from your system. Do not reinstall, or something like that. Only then will you be able to solve the problems you are having.

• Graphic issues yoga 3 - MOVIES from NETFLIX do not PLAY SMOOTHLY

  I had the Lenovo update today and hope that it would treat the video problem. For those of you who are not familiar with the issue, Yoga 3 will not smoothly play a video. For example, I tried to play a movie from Netflix and it was a question of image by image: the video wasn't smooth and impossible to watch. The audit has been good, but the video jerky all the time. I was hoping that the wyould discussed this since it's their laptop upscale and it is reasonable to assume users would love to watch videos on their Yoga. Given the time of horrible response of Lenovo to questions, I hope that this problem will not look for months and months. They are pretty well silent on technical problems. I'll look for sites where I can make note of this issue to other unsuspecting buyers do not have the same $1 400 mistake I did. Not being able to play a video of Netflix is insulting.

  You need to uninstall chrome and reinstall completely.

  May be there is a chrome extension that interferes with reading. It is not a laptop problem.

• Derived from the table

  How can I differentiate a table? When I connect the same table to the full block he automatically understands as a function of z(x,y). I can't do the same thing with the drift.

  What should I do?

  Thank you