Sam 3000-514 - error at startup

Similar Questions

• Satellite 3000 514 often starts no-beep code appears

  Hello
  I have a 5 year satellite, 3000-514 laptop and now it only starts when it wants to.
  Most of the time, the screen remains black and the laptop emits four beeps of the four sounds.
  I can try and try again nothing happens, until he starts?

  It is very annoying, anyone experienced this same pb?
  Anyone know how to fix this?

  Thanks for your help

  Kind regards
  Marc

  It seems that the laptop may not successfully complete the POST (power on self test). The laptop will beep because there is a material error, and some device has not passed the test.
  You can try to disconnect all the external devices and then try to start the laptop.
  But I put t see much chance that this will help solve the problem

  For most in such cases, external assistance is necessary. The technician with a lot more experience as a common user like me and you should check the laptop. I hope that there is no malfunction of the motherboard as this could be a bit expensive :(

• Error at startup of disc

  Whenever I boot, I get the message

  "Read a disk error has occurred."
  Press Ctrl-Apt-del to restart. "

  The only changes I made were resize the partition about 60 GB with gparted (remember, the windows partition had about 260 GB free in any case) and installed ubuntu on this very place, I released. Basically, now everytime I try to boot Windows I get this error. It's only a few minor drawbacks at the moment, but I'd appreciate something to help me get to use my application. [b] on ubuntu, I can mount the complete file system, browse and correct it. [/ b] The file system is very good, the hard drive is fine.

  If you can help at all, please, I have an Acer Aspire M1100 with stock hardware installed. Do not run Windows 7 my Dell Dimension 3000 shit goes, that's why I have Windows XP installed.

  Hi Mike - I found this thread through a search - I hope this is OK to post here...

  I now get the same error message on my PC (Dell Dimension 4100) after the x Sockets in my house jumped - off the PC - and then back on later. PC has XP Professional on it. I looked through the XP CD Recovery Console - chkdsk reported mistakes - I've also run fixboot and fixmbr but I get the same error at startup. I don't seem to be able to start using the XP CD.

  Have you advice? In addition, my partners laptop has Vista and a DVD - RW drive - I would be able to make a disk bootable CD to start XP?

  Thanks, Nobby

  Chris,
  If you put a different HARD drive in your current machine with existing XP is installed, you can have a bit of a problem.  If XP has been installed on the drive in another machine then it will search for the material of the other computer.  So if you put another drive in this machine, you may have to reinstall XP on it.  Or you can put this drive in another machine as a slave drive and save your files.  Anyway I think that you will be able to recover your information since you were able to do an installation to and able to navigate so that in the Recovery Console.
  Once you have your data safe, I would check with Western Digital for a disk utility that can test the drive completely.  At this point, he may be able to format and mark bad sectors and make it again completely usable.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Where can I buy a motherboard for Satellite 3000 514?

  I need to replace the card mother (?), mother (?) on my Toshiba Satellite S3000-514.

  Question: Where can I go to buy the motherboard?

  Question 2: How much in pounds sterling can I expect to pay?

  Thank you.

  Hello

  I found this site with the motherboard for a Satellite 3000 series but it seems that the Satellite 3000 514 is not listed.
  http://www.sparepartswarehouse.com/Toshiba, Laptop, K000816560.aspx,

  I m not 100% sure, but I think that the 3000 series was delivered with the same motherboard.
  But before you buy anything, you should ask Toshiba authorized service partner for a more details. Guys should be able to also order a compatible Board directly from Toshiba.

  I think you're on the good side, if you ask the opinion of the service provider.

  But as you can see the motherboard is expensive and eventually you might find a second-hand surfboard.

• 3000-514: driver for nVidia Geforce 2 Go

  Hello!

  I want to update my driver for my graphic device (Nvidia Geforce 2 GB), because otherwise Ogre 3D (game engine) does not work on my computer. My laptop is a 3000-514 Satellite. The problem is that I can't find any update.

  Maybe you can get some advice? Thank you
  Julia

  Hello

  Have you checked this site?
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  If the driver is not available for you section Satellite, please check other units with the same graphic card. Maybe the driver for other mobile will work on your device.

  Good bye

• Satellite 3000-514 does not start - 1-1-1-1 beep code appears

  Hello

  http://forums.computers.Toshiba-Europe.com/forums/images/bn_preview.gif
  Overview

  My Toshiba Satellite 3000 514 starts each others time and gives me the following beep code: 1-1-1-1 (4 short beeps) and a black screen.

  Does anyone know what this means?
  This happens roughly every second time I try to start the PC. After l ' works again, it especially works again.

  Any ideas?

  Thank you!

  Hello

  The beep code appears especially if the POSITION cannot be passed correctly.
  If the problem is detected until the BIOS initialize the video card and the code cannot be displayed on the screen of the BIOS will play several beeps.
  Each BIOS supports the meanings of the own beep codes. For example BIOS Toshiba beep code is not the same thing as "beep code" Phoenix BIOS.

  To my knowledge the Sat 3000 using Phoenix BIOS. In this case, you can try to search in the internet for a description of the code.
  I found this site:
  BIOS beep codes

  But generally cannot solve this anomaly just average and I would recommend contact a technician with huge experience computer laptop.

• Not recognized on Satellite 3000 514 Notebook memory intermittedly bench

  At the start of my satellite 3000-514-Notebook, which contains 2 banks of memory of 256 MB each, the upper 256 MB Bank very often is not recognized more, and my laptop runs on 256 MB only. Initially, this happened only when I started in hot condition, while that morning, all 512 MB has become available. All memory different tests, including MSDiag, show no error when running with 256 or 512 MB (when available). but the laptop does not start when I change banks of 2 memory or simply use the top Bank in the lower position. I would just buy a new memory of 256 MB of memory, if I was sure that the memory and not the motherboard is the culprit. Anyone have an idea how I could fix this?

  > I would just buy a new memory of 256 MB of memory if I was sure that the memory and not
  > the motherboard is the culprit

  Therefore, the diagnostic test is necessary.
  A technician can test the memory slots with different memory modules and after these tests, it can give you a detailed report.

  I don t think that everyone here will give you a 100% solution. We can speculate and it s something wrong with the memory module or the motherboard. But a test is necessary to ensure the fault.

• HP PhotoSmart Essential error at startup

  Hello

  Until the other day I had any problems when I start my computer.  A few days when I started the computer I got a pop up titled 'HPPhotosmartEssential' box and it said "Please wait while Windows configures essential HPPhotosmart" and a few seconds later another popup box titled "HPPhotosmartEssential" the following information - "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your personlel provider or support package ".

  I have more the OfficeJet J4680 printer installation CD but I don't have the software to download so I opened it upwards and it was installed in the temp folder.  of which I went to start and typed folder and opens this file and follow these steps...

  Open the file "Setup."

  Open the folder "Scan". Right click on the "scan" (windows installation package) file and click 'fix '. If no error message appears, once again, right-click on the file and select "install".

  Return to the folder and open "bpd_scan" installation folder. Right click on the file 'bpd_scan' (windows installation package) and click 'fix '. If no error message appears, once again, right-click on the file and select "install".

  When I clicked on repair I received a new window bpd_scan error message that says: Module C:\Program HP Imaging\bin\hpqebpd2.dll failed to register. HRESULT-2147220473. Please contact support staff. I clicked on OK & following the next step

  Return to the folder and open "destinations" installation folder. Repeat the process above and that the repairs happened well.

  I restarted the pc but the problem persists.  (I deleted the shortcut of this file that was located in start > programs > startup - I deleted the shortcut of this file (called HP Digital Imaging Monitor).)

  I also opened a command prompt (run as administrator) and type in regsvr32 hpqebpd2.dll and who stated DLLRegister Server in hpqebpd2dll.

  I restarted the pc, but when I click on the file to open it (even if I do a right click and run as administrator) I still get 2 contextual window boxes.  And when I click OK or cancel the boxes still jump upwards of 3 or 4 times until it stops.

  I noticed that when I clicked to run / open this file it will appear in the lower right but I always get these boxes popup several times.

  Nothing had changed from one day to the next on the pc so I don't know why the problem occurred suddenly.  I ran several scans online for viruses and malware, as well as a boot scan, but nothing was found.   I have run ccleaner and noticed that he has found a missing DLL to C:\PROGRAM HP IMAGING\bin\HpqSRmon.exe

  I am running Windows Vista Home Premium with all current updates and is an officejet j4680 printer all-in-one.

  Others want a complete uninstall of the software to uninstall Panel or revo control printer and then reinstall the software I don't know what I can do to possibly solve the problem.   The printer software is version 14.

  Other possible suggestions or solutions would be very appreciated.

  TIA

  I'm glad you responded! I wanted to share with you all what I have solved my problem last night after having carefully followed the steps that I mentioned above. This way I can now explain the steps in a little easier way. When I started to experience this error on startup, I thought it was related to my network because it happened also when I turned the printer on and outside. I have to press OK, Cancel, etc. what felt like 50 times before my error message disappeared. I know it's a different file, but the symptoms are exactly the same, since an uninstall did not resolve the question or fixing things in Device Manager. It seems that the link you have provided very simple steps to a L3 uninstall. The great binding, but I found a simple way for the common user. Here are the steps that I took last night and my computer worked never better:

  1. I did a normal uninstall first. Don't forget if you have a USB cable, wait that uninstalling invite you to remove the cord but also before Setup tell you plug it back in. The complete uninstall took almost 25 minutes.

  At the end of the uninstall, you will get a prompt to click 'Finish', however I didn't click it. I've been waiting to restart my computer after I ran the disk cleanup utility in all programs > Accessories > system tools > disk cleanup.  This process took almost an hour.

  2 after disk cleanup was complete, I restarted the computer by clicking on the button 'Finish' the HP software that was always on my desk.

  3. after the restart, I followed the link to CCleaner and would like to mention to people not too savvy to be careful by pressing the green button 'Download now' more than once computer. It seems that there are a handful of commercial products that look like they tried to trick you into downloading the software.

  4. once the download is complete, CCleaner has opened and seemed much easier to use than I thought. I chose the tab register on the left, "scanned for any question," then selected difficulty scan after you have backed up files to remove (the software asked me if I wanted to save that I did). Sometimes you can scan up to three times until all problems have been corrected. As easy as it sounds, I still highly recommend reading so much about this product before installing it (see previous posts). This process was done very quickly, so I decided to use the file cleaner as well. Who did take a long time - about 30 minutes.

  5. this time, I rebooted by computer by stopping completely and then back on with the power button. I always liked this method instead of select "restart" your computer.

  6. I have confirmed my operating system on my computer will start and by doing a right click on 'My Computer' and selecting Properties at the bottom of the box grey just to make sure that I do not install the HP bad software. Then everything just re-installed the software at www.hp.com/support by typing the name of my printer tab support and drivers. The whole installation process took 20 minutes and even got an error at the beginning of my extraction process which stated "the Extraction failed. File is corrupted. "My heart is Serra for a bit, but after having clicked on the button"Download"once again, I have had absolutely no problems my network printer installation.

  7. I would like to add, during the installation process, you will see a screen that says 'Click here to customize' and I deselected product Participation, HP Update and some other useless tools, but I kept the driver, the solution, HP Imaging Device Center (which is what was causing my problem) and HP Photosmart Essentials since this is what was causing the problem. I had no problem after that.

  8. Finally, I did a reboot to ensure that all boot errors went away and the computer booted faster than ever with no error. Final test of all the features worked great. I was excited to try these steps on my own last night so that I could provide a way to rephrase things for all those too afraid of getting deep into their computer files. I hope as the method to keep it simple you will also feel because that please don't forget, using third-party software comes with its own risks. Let me know if this does not work, and then we can speak of an uninstall of L3/L4.

• Center of solution error at startup - HP4500 wireless

  Greetings!

  HP Officejet Pro 8500 A909g

  Win 7, 64 bit, Intel Dual Core

  Error at startup of the solution center 'Solution Center cannot work because your installation is not complete.  "Please plug in USB (I am running wireless) or restart the installation of the CD.

  Both software & printer worked very well for a long time.  To reinstall the software (yet) as 8500 disappeared from ground Ctr.  Removed all HP using HP uninstall disk, and then click Add/Remove programs.  Restarted the modem and printer.  Install and the latest version of the downloaded software went well.  8500 wireless recognized installation is complete, test page print wireless.  At the exit did not restart. Tried to ground Ctr and above got the error at startup.  I rebooted.  The same problem.  Then, I removed all and tried again with the same result.  HP printers are great - the software I used (in addition to time & different HP printers) makes me absolutely crazy!

  Kind regards

  Rich

  Hey Sherich - Id suggest giving the utility Install of Windows 7 to try first and then the doctor of printing & scanning HP. They can be found here: Hp Diagnostic utility's

  Let me know if or the other of these tools are able to solve the problem. Otherwise post returns with all new details or error messages, and we can go from there.

  Sorry for the delay!

  Sean

• System operating error at startup of the service OracleMTSRecoveryService

  I am facing the following problem when installing Oracle 11 g Release2 database at Microsoft Window 32 - bidt
  
  System operating error at startup of the service OracleMTSRecoveryService
  
  Note: Once I have already ionstalled this database on the same machine and after that I the deleted of my D drive manually by the judgment that these services. Now, after some data, I'm againg installation but it has this error.
  Please help me how to solve this problem.
  
  Thanks in advance.
  Yassen

  "OS error" is not so convincing, check the log events for the purpose. Perhaps you don't need this service, if you are not using MTS:

  /*
  ORACLEMTSRecoveryService allows Oracle databases to use as resource managers in Microsoft Transaction Server.
  */

  So the quick and dirty solution disable the service.

  Werner

• Error at startup. Need serious help.

  I am not able to perform a search on Google.com and especially all the search engine, it's evidence of a connection not approved and if I get complete site then it works some time (for example www.facebook.com). I tried to configure the real clock timings. In addition, even after download ad-blocker, I always face problems ad.

  What is the message of the error at startup? Is it in the page itself or a pop-up?

  There are several potential causes of generalized certificate errors. It's Firefox is not completely set up to work with your security software (or using Firefox's Reset feature, which means that set up again). But the malware is also a potential culprit.

  You have added all the exceptions (using the Add Exception button in the section "I understand the risks" of the error page)?

  You can check that your Firefox connection settings have not been changed:

  "3-bar" menu button (or tools) > Options > advanced > tab mini network > button "settings".

  You can try 'No proxy' it.

• I get this error at startup: mozupdate.dll missing. What should I do

  mozupdate.dll error at startup
  I installed a new copy of firefox and the problem remains.

  Hello

  Please see this.

• How to replace CMOS on Satellite 3000 514?

  My laptop don't boot (even if power light turns on) and I suspect the CMOS needs to be replaced.
  How can I open and replace in my Satellite 3000 514?
  I tried to disassemble the back, but it got stuck.

  Any help?
  Thank you.

  >... My laptop don't boot
  This means you there is absolutely no reaction when you press the power button / stop?

• trayyapp error at startup

  I downloaded a few Assistant s/w and hp driver printer for my dv4 and maybe a few other s/w HP.  Now, I get a Trayapp.msi error at startup.  I don't see no trayapp s/w can I specifically reinstall or remove.  How can I tell what s/w must be reinstalled to get rid of this error?

  It is likely a piece of software which it was installed or uninstalled recently. You have installed an HP printer on this computer?

• Realtek RTL8101 PCI Ethernet is in error during startup

  Hi all
  I have EDT recently bought by Satellite A200-1CN notebook PC series. I'm having a problem at the start of the system that has Windows Vista installed.
  The Realtek RTL8101 PCI Ethernet v 1.02 (060510) gives error during startup. The error is to run is as follows

  PXE - E61 Media Test failed
  MOF: Left PXE ROM

  Can any help with this problem

  Concerning

  Hello

  Hmm you ve you have a problem with the Vista boot! :|

  Usually, this message appears because the BIOS can not find a source of start-up as ODD or HARD drive and then try to boot from LAN.

  Perhaps the BIOS can not find HARD drive due to a hardware problem.

  Hmmm. First of all, you should try to change the boot order in the BIOS. Put the HARD drive as first boot device.
  Save the settings and try to restart the laptop. If it is not possible to start the Windows Vista I guess that HARD drive is dead!

  Have you tried to reinstall Windows Vista using the Toshiba Recovery CD? Check this box!

  If all this procedures don't help I recommend you contact the ASP in your country.
  The technician must check the laptop and if necessary, it should replace the HARD drive.
  Your warranty is valid so that everything should be done for free.

  Good luck