Same subnet on all the VPN endpoints?
Anyone know if it is possible to have the same subnet on all the endpoints of a VPN tunnel star topology? I need to create tunnels ASA5505 18 back to an ASA5510. Instead of having 18 subnets over there, it sounds more effective for my request just to have one. Sort of a CLOUD (there is that Word) inquiry.
I was wondering.
Of course read below
http://www.Cisco.com/en/us/products/ps6120/prod_configuration_examples_list.html
Tags: Cisco Security
Similar Questions
-
How do you assign at the same speed for all the notes?
Hi all! Can any one help with how to assign the same speed to all the notes? I know that press "Command + A" to select all, but stay to discover how to get more than one note to change both? Thank you!
in piano roll, select velocity tool, cmd to select all notes, hold SHIFT-Option and drag upwards or downwards.
-
Just to confirm that the VPN endpoint must be on a physical interface on a SAA
I have a client who changes their public IP address range, currently the FORMER IP exists on the physical Interface Internet and the NEW is the ASA, to be able to use the NEW IP to the endpoint of the VPN, it must be on a physical interface, so I think having a trunk to the Internet router, so that the NEW can have a physical address.then IP can pass another on the NEW for VPN.
Hi Richard,
Yes, it must be on a physical interface. Because you cannot configure secondary ip on the ASA, the only approach I can think of, is to set up a trunk according to your suggestion. Unless you use a proxy-arp :).
HTH.
Kind regards
Terence
-
The column is to summarize all the lines and display the same value in all the lines.
Hello
Please see the query below. I have a problem in this query to retrieve the abs_qty when the P:item ie setting) msib.segment1 is not given as an input parameter. His warning just to the top of the total quantity for all items. With the passage of P:item ie) msib.segment1 as an input parameter, it gets the exact value for abs_qty. kindly help me to solve this problem.
Note only: manufacturing plant, start date and end Date are Mandatory parameters (required). Others such as code point, Base model and Scheduler are optional.
SELECT mmt.transaction_date date_produced, msib.segment1 point,
CIC.cost_type_id, msib.description item_description,
MC.segment6 base_model, mc.segment7 trade_brand,
MMT.subinventory_code subinventory,
mil. Segment1 | '.' || mil. Segment2 | '.' || mil.segment3 ELECTROLUX,
OOD.organization_code
|| '-'
|| OOD.organization_name manufacturing_plant,
MMT.transaction_quantity quantity_produced,
MTT.transaction_type_name transaction_type, msib.inventory_item_id,.
MSIB.organization_id, cic.material_cost, COST,
CIC.material_overhead_cost transport, csc.standard_cost,.
* (check (NVL ((SELECT SUM (mmt.transaction_quantity) total_NET_qty *))))
OF mtl_material_transactions mmt.
mtl_system_items_b msib,
mtl_transaction_types mtt,
org_organization_definitions ood,
mtl_txn_source_types mts
WHERE mmt.organization_id = msib.organization_id
AND msib.inventory_item_id = mmt.inventory_item_id
AND mmt.transaction_type_id = mtt.transaction_type_id
AND mmt.organization_id = ood.organization_id
AND mtt.transaction_type_name = "Completion of work in PROGRESS"
AND mts.transaction_source_type_name = 'job or schedule. "
AND msib.segment1 = NVL (: p_item, msib.segment1)
AND ood.organization_code =: p_manufacturing_plant
AND BETWEEN TRUNC (mmt.transaction_date): p_start_date
AND: p_end_date), 0)
-
* (NVL ((SELECT SUM (mmt.transaction_quantity) total_NET_qty *)))
OF mtl_material_transactions mmt.
mtl_system_items_b msib,
mtl_transaction_types mtt,
org_organization_definitions ood,
mtl_txn_source_types mts
WHERE mmt.organization_id = msib.organization_id
AND msib.inventory_item_id = mmt.inventory_item_id
AND mmt.transaction_type_id = mtt.transaction_type_id
AND mmt.organization_id = ood.organization_id
AND mtt.transaction_type_name = "Ongoing work exit"
AND mts.transaction_source_type_name = 'job or schedule. "
AND msib.segment1 = NVL (: p_item, msib.segment1)
AND ood.organization_code =: p_manufacturing_plant
AND BETWEEN TRUNC (mmt.transaction_date): p_start_date
AND: p_end_date
*), 0))) abs_qty of the double) AS ABS_qtyy, * (select (NVL ((SELECT SUM (mmt.transaction_quantity) total_NET_qty
OF mtl_material_transactions mmt.
mtl_system_items_b msib,
mtl_transaction_types mtt,
org_organization_definitions ood,
mtl_txn_source_types mts
WHERE mmt.organization_id = msib.organization_id
AND msib.inventory_item_id = mmt.inventory_item_id
AND mmt.transaction_type_id = mtt.transaction_type_id
AND mmt.organization_id = ood.organization_id
AND mtt.transaction_type_name = "Completion of work in PROGRESS"
AND mts.transaction_source_type_name = 'job or schedule. "
AND msib.segment1 = NVL (: p_item, msib.segment1)
AND ood.organization_code =: p_manufacturing_plant
AND BETWEEN TRUNC (mmt.transaction_date): p_start_date
AND: p_end_date), 0)
-
(((SELECT SUM (mmt.transaction_quantity) total_NET_qty NVL
OF mtl_material_transactions mmt.
mtl_system_items_b msib,
mtl_transaction_types mtt,
org_organization_definitions ood,
mtl_txn_source_types mts
WHERE mmt.organization_id = msib.organization_id
AND msib.inventory_item_id = mmt.inventory_item_id
AND mmt.transaction_type_id = mtt.transaction_type_id
AND mmt.organization_id = ood.organization_id
AND mtt.transaction_type_name = "Ongoing work exit"
AND mts.transaction_source_type_name = 'job or schedule. "
AND msib.segment1 = NVL (: p_item, msib.segment1)
AND ood.organization_code =: p_manufacturing_plant
AND BETWEEN TRUNC (mmt.transaction_date): p_start_date
AND: p_end_date
(), 0))) abs_qty of dual) * csc.standard_cost AS abs_val
OF mtl_material_transactions mmt.
mtl_system_items_b msib,
mil mtl_item_locations
mtl_transaction_types mtt,
org_organization_definitions ood,
mtl_txn_source_types mts,
MC mtl_categories,
mtl_item_categories mic,
MCS mtl_category_sets,
cst_item_costs cic,
cst_standard_costs csc,
cst_cost_types ct,
mfg_lookups OLM
WHERE mmt.organization_id = msib.organization_id
AND msib.inventory_item_id = mmt.inventory_item_id
AND mmt.locator_id = mil.inventory_location_id
AND mil.organization_id = msib.organization_id
AND mil.subinventory_code = mmt.subinventory_code
AND mmt.transaction_type_id = mtt.transaction_type_id
AND msib.organization_id = ood.organization_id
AND mic.category_set_id = mcs.category_set_id
AND mc.category_id = mic.category_id
AND mc.structure_id = mcs.structure_id
AND mic.inventory_item_id = msib.inventory_item_id
AND mic.organization_id = msib.organization_id
AND mcs.category_set_id = 52487965
AND msib.inventory_item_id = cic.inventory_item_id
AND msib.organization_id = cic.organization_id
AND ct.cost_type_id = cic.cost_type_id
AND cic.organization_id = ood.organization_id
AND mil.inventory_location_id = mmt.locator_id
AND mmt.transaction_source_type_id = mtt.transaction_source_type_id
AND mmt.transaction_action_id = mtt.transaction_action_id
AND mmt.transaction_source_type_id = mts.transaction_source_type_id
AND mmt.transaction_action_id = mlo.lookup_code
AND mmt.inventory_item_id = csc.inventory_item_id
AND mmt.organization_id = csc.organization_id
AND csc.last_update_date > =.
(SELECT MAX (csc1.last_update_date)
OF cst_standard_costs csc1
WHERE csc1.inventory_item_id = mmt.inventory_item_id
AND csc1.organization_id = mmt.organization_id)
AND msib.segment1 = NVL (: p_item, msib.segment1)
AND NVL (mc.segment6, 'X') = NVL (: p_base_model, NVL (mc.segment6, 'X'))
AND = NVL (msib.planner_code, 'Y')
NVL (: p_planner_code, NVL (msib.planner_code, 'Y'))
AND SUPERIOR (mlo.meaning) = "COMPLETION of the ASSEMBLY.
AND mtt.transaction_type_name = "Completion of work in PROGRESS"
AND ct.cost_type = 'Frozen '.
AND mts.transaction_source_type_name = 'job or schedule. "
AND ood.organization_code =: p_manufacturing_plant
AND BETWEEN TRUNC (mmt.transaction_date): p_start_date AND: p_end_dateIf abs_qty and, accordingly, abs_val must not be the same for all rows returned, you will need to rewrite your query so that the abs_qty will not be calculated (separately) in isolation without interaction with the data in the main table list.
Your query is treated the same as below (note the changed table alias by adding numbers to the original of yours)SELECT mmt.transaction_date date_produced, msib.segment1 item, cic.cost_type_id, msib.description item_description, mc.segment6 base_model, mc.segment7 trade_brand, mmt.subinventory_code subinventory, mil.segment1 || '.' || mil.segment2 || '.' || mil.segment3 LOCATOR, ood.organization_code || '-' || ood.organization_name manufacturing_plant, mmt.transaction_quantity quantity_produced, mtt.transaction_type_name transaction_type, msib.inventory_item_id, msib.organization_id, cic.material_cost COST, cic.material_overhead_cost freight, csc.standard_cost, (select (NVL( (SELECT SUM (mmt1.transaction_quantity) total_NET_qty FROM mtl_material_transactions mmt1, mtl_system_items_b msib1, mtl_transaction_types mtt1, org_organization_definitions ood1, mtl_txn_source_types mts1 WHERE mmt1.organization_id = msib1.organization_id AND msib1.inventory_item_id = mmt1.inventory_item_id AND mmt1.transaction_type_id = mtt1.transaction_type_id AND mmt1.organization_id = ood1.organization_id AND mtt1.transaction_type_name = 'WIP Completion' AND mts1.transaction_source_type_name = 'Job or Schedule' AND msib1.segment1 = NVL (:p_item, msib1.segment1) AND ood1.organization_code = :p_manufacturing_plant AND TRUNC (mmt1.transaction_date) BETWEEN :p_start_date AND :p_end_date ),0 ) - NVL( (SELECT SUM (mmt2.transaction_quantity) total_NET_qty FROM mtl_material_transactions mmt2, mtl_system_items_b msib2, mtl_transaction_types mtt2, org_organization_definitions ood2, mtl_txn_source_types mts2 WHERE mmt2.organization_id = msib2.organization_id AND msib2.inventory_item_id = mmt2.inventory_item_id AND mmt2.transaction_type_id = mtt2.transaction_type_id AND mmt2.organization_id = ood.2organization_id AND mtt2.transaction_type_name = 'WIP Issue' AND mts2.transaction_source_type_name = 'Job or Schedule' AND msib2.segment1 = NVL (:p_item, msib2.segment1) AND ood2.organization_code = :p_manufacturing_plant AND TRUNC (mmt.2transaction_date) BETWEEN :p_start_date AND :p_end_date ),0 ) ) abs_qty from dual ) AS ABS_qtyy, (select (NVL( (SELECT SUM (mmt3.transaction_quantity) total_NET_qty FROM mtl_material_transactions mmt3, mtl_system_items_b msib3, mtl_transaction_types mtt3, org_organization_definitions ood3, mtl_txn_source_types mts3 WHERE mmt3.organization_id = msib3.organization_id AND msib3.inventory_item_id = mmt3.inventory_item_id AND mmt3.transaction_type_id = mtt3.transaction_type_id AND mmt3.organization_id = ood3.organization_id AND mtt3.transaction_type_name = 'WIP Completion' AND mts3.transaction_source_type_name = 'Job or Schedule' AND msib3.segment1 = NVL (:p_item, msib3.segment1) AND ood3.organization_code = :p_manufacturing_plant AND TRUNC (mmt3.transaction_date) BETWEEN :p_start_date AND :p_end_date ),0 ) - NVL( (SELECT SUM (mmt4.transaction_quantity) total_NET_qty FROM mtl_material_transactions mmt4, mtl_system_items_b msib4, mtl_transaction_types mtt4, org_organization_definitions ood4, mtl_txn_source_types mts4 WHERE mmt4.organization_id = msib4.organization_id AND msib4.inventory_item_id = mmt4.inventory_item_id AND mmt4.transaction_type_id = mtt4.transaction_type_id AND mmt4.organization_id = ood4.organization_id AND mtt4.transaction_type_name = 'WIP Issue' AND mts4.transaction_source_type_name = 'Job or Schedule' AND msib4.segment1 = NVL (:p_item, msib4.segment1) AND ood4.organization_code = :p_manufacturing_plant AND TRUNC (mmt4.transaction_date) BETWEEN :p_start_date AND :p_end_date ),0 ) ) abs_qty from dual ) * csc.standard_cost AS abs_val FROM mtl_material_transactions mmt, mtl_system_items_b msib, mtl_item_locations mil, mtl_transaction_types mtt, org_organization_definitions ood, mtl_txn_source_types mts, mtl_categories mc, mtl_item_categories mic, mtl_category_sets mcs, cst_item_costs cic, cst_standard_costs csc, cst_cost_types ct, mfg_lookups mlo WHERE mmt.organization_id = msib.organization_id AND msib.inventory_item_id = mmt.inventory_item_id AND mmt.locator_id = mil.inventory_location_id AND mil.organization_id = msib.organization_id AND mil.subinventory_code = mmt.subinventory_code AND mmt.transaction_type_id = mtt.transaction_type_id AND msib.organization_id = ood.organization_id AND mic.category_set_id = mcs.category_set_id AND mc.category_id = mic.category_id AND mc.structure_id = mcs.structure_id AND mic.inventory_item_id = msib.inventory_item_id AND mic.organization_id = msib.organization_id AND mcs.category_set_id = 52487965 AND msib.inventory_item_id = cic.inventory_item_id AND msib.organization_id = cic.organization_id AND ct.cost_type_id = cic.cost_type_id AND cic.organization_id = ood.organization_id AND mil.inventory_location_id = mmt.locator_id AND mmt.transaction_source_type_id = mtt.transaction_source_type_id AND mmt.transaction_action_id = mtt.transaction_action_id AND mmt.transaction_source_type_id = mts.transaction_source_type_id AND mmt.transaction_action_id = mlo.lookup_code AND mmt.inventory_item_id = csc.inventory_item_id AND mmt.organization_id = csc.organization_id AND csc.last_update_date >= (SELECT MAX (csc1.last_update_date) FROM cst_standard_costs csc1 WHERE csc1.inventory_item_id = mmt.inventory_item_id AND csc1.organization_id = mmt.organization_id ) AND msib.segment1 = NVL (:p_item, msib.segment1) AND NVL (mc.segment6, 'X') = NVL (:p_base_model, NVL (mc.segment6, 'X')) AND NVL (msib.planner_code, 'Y') = NVL (:p_planner_code, NVL (msib.planner_code, 'Y')) AND UPPER (mlo.meaning) = 'ASSEMBLY COMPLETION' AND mtt.transaction_type_name = 'WIP Completion' AND ct.cost_type = 'Frozen' AND mts.transaction_source_type_name = 'Job or Schedule' AND ood.organization_code = :p_manufacturing_plant AND TRUNC (mmt.transaction_date) BETWEEN :p_start_date AND :p_end_date
Concerning
Etbin
-
Problem with Paolo, it keeps wanting to install same 5 updates all the time!
I'm on windows vista and my PC keeps wanting to install the 5updates even all the time, my pc says I have installed their fine but I keep getting invited to download the again and again. They are updated net framework 4 are the following: KB2600217, KB2487367, KB2468871, 2656351, KB2533523. Please can someone I tried all of the solutions that I can help and even downloaded microsoft solve this problem, but nothing helped. thanx
Hi markjolly,try to follow this linkIt's also the related wirehope this helps,Thank youMakoi -
How to make a portable USB drive use the same drive letter all the time
Original title:
I have many removable hard drives from Toshiba. Use them for photography. I usually connect simply, transfer photos from the DSLR camera (images raw, very big, not a camera point/rod). When I plug in, computer automatically selects a player... F, g, H: by M or N.
Then, I use Adobe Lightroom for adjustments. Once they are imported into Lightroom it keeps track of this record, they were on.
PROBLEM:
If I unplug the removable hard drive, plug in at a later date, computer can randomly choose a different example M instead of H letter.
LightRoom is so impossible to find photos/images. I would then have to re - import and start any setting completely from the beginning.Question:
How to direct the computer to select the same drive when I plug in a removable hard drive.Plug in a hard drive removable, computer selects H:, can I import into LightRoom, I disconnect the removable hard drive, a week later I want to make adjustments more photography, connect the removable hard drive and FORCE/DIRECT COMPUTER TO SELECT H: AGAIN (or whatever of the original letter was).
Hope it makes sense.
Jim
Hello
There is a way to assign a static drive on an external USB drive letter, so you always get the same drive letter for the drive.
Click on the following link and follow the steps to change a drive letter.
Change, add, or remove a drive letter
http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter
I hope this helps.
-
Same Date for all the photos in the photo gallery
I have over 4,000 photos in the Gallery Windows. I tried to change a group of photos at a time and I accidentally changed them all on the same date. RESTORATION running did not re-establish my photos of the original date.
Hi a Cubs fan.
The only option is to use previous versions to restore files to the folder that contains the photos.
(a) right click on the file or folder and then click restore previous versions.
(b) click on an item in the list, and then click restore.
Only editions Windows Vista Business, Windows Vista Enterprise and Windows Vista Ultimate Edition supports previous versions of files.
Previous versions of files: frequently asked questions
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
with the update of daily Thursday (Australia) after update owned couldn't boot received message "could not find xpcom.
I then restored by day sauvegardΘ installed upgrading again every day would not restart with the same message
I tried again on Saturday you have the same problem
I'm now ignoring the update message that is very annoying because he wants me to update dailyThe bug in question should be solved with a daily update of today. However, I agree with the recommendation to go with 31.0 once it comes out next Tuesday, or at least to use the beta versions (once per cycle) as a compromise between stability and get the latest features and updates to the platform.
-
How to determine if 2 IPs are on the same subnet
Hi all!
I have a Client/Server connection over a network, and I wants to determine if they are part of the same subnet.
The server is installed on one OR cFP-2220, so I can't use all the exec system commands to access network settings.
My code is so far simply determine if the client and server are both on the local host.
Please see attachment!
Concerning
Paul
Hello!
Thanks for the reply.
After a google search, I think it is the right way to do it: (Ref)
XOR (B and H) (M & a)
Thank you to direct me in the right direction!
Kind regards
Paul
-
FF28 upgrade &; all the addons are showing that off, even if they are enabled
Upgrade to FF28 & addons all + userscripts show that disabled, even if they are enabled.
I already tried to delete:
addons. JSON
Compatibility.ini
Extensions.ini
Extensions. JSON
Extensions.SQLiteAll that done as a cause of Firefox go in a "reboot several times 50 times more than one by one and each time asked me to manually install each addon. The process took more than 5 minutes and left me very impressed by the ability of Firefox bugs.
End result? I am still sitting with the same problem. All the addons are showing that off, when they are turned on in fact. I cannot change them, uninstalled them or install new addons.
PS. Oh and I write of Sleipnir not Firefox because Firefox has refused to work with the buttons on this page for some reason any (yes I'm allowing scripts in NoScript)
PPS. Oh and my old account here for some reason some refused to open a session, even though I wrote the user name and password and I tried using the user AND email for the login process. Overall, very impressed with the services of Mozilla for now. I really want to move to a different browser.
PPP. I have over 300 tabs open in Firefox, so can't go on the road to reset, because Firefox has no way to record a session.Honestly, Firefox must be transportable by default. What the point of having a browser that you spent 12 months + customization with 300 + tabs open, if your Windows partition is damaged and you cannot retrieve your tabs because it is installed? I will never use the installed version of Firefox again because it is impossible to save. If I had been using portable Firefox at the time where I could have accessed my XP partition corrupted with Ubuntu live USB, back up the folder and be good to go on my new install of Windows 8. Instead I had to start from scratch. That's what you get for not using of portable software.
This is resolved. The steps that I followed:
- Ignore all the Internet advice and find a way to do it myself because no one else seems to know anything about Firefox.
- Save the entire Firefox portable folder making it a 7zip file
- Disable all addons
- Download the latest mobile Installer
- Install using the portable Installer but navigate up to the existing installed cell phone directory
- Open portable Firefox after updating
- Update all addons (do not select all again)
- Restart Firefox
- Now activate the addons, then restart Firefox
Note: installing addons now I find that I can't add using the button 'Download' for the addon, I have to copy the URL of the button, paste it in a new tab and press enter
-
Hello
I saw a few topics, it seems I'm not the only one, but I can't find the solution...
I try to connect every time, I get disconnected immediately. My partner connects without a problem on the same terminals.
I try a lot of things, reset password, uninstall, install, but same thing happens all the time, on android, ipad, laptop...
I can't use the credit I have on my account yet, it's very frustrating, please help!
Thank you
http://heartbeat.Skype.com/2014/09/i_keep_getting_signed_out.html
Open your Skype account setup page:
https://secure.Skype.com/portal/account/settings
If your Skype account is bound with the Microsoft account, then try to separate them.
https://support.Skype.com/en/FAQ/FA12211/how-do-i-unlink-my-Skype-and-Microsoft-or-Facebook-accounts
-
How to make all the pictures fade in and out in a slideshow movie?
I have almost finished my movie with audio and believe me it was a learning experience, and I loved to do. Now, here's my problem. I chose the effect for photos to fade, this only happens for the first pic, and I want that all the photos to fade the slide show. So please help me if you can is a gift from family and I want it to be so nice.
Thank you
JudyWhat version of Movie Maker are you using?
Windows Live Movie Maker or Vista Movie Maker 6?If you use Live Movie Maker, you will probably need to
have to add the effect to a picture in time.If you use Vista Movie Maker 6... What follows
steps you can make to add the same effect to all the
photos at once.Reach... Storyboard...
Select at least a frame and go...
Edition / select all...Reach... Video transitions... or... Video effects
Right-click of your choice... and choose...
"Add to storyboard table '. -
my icons all all the open program in a program/windo
If itry to openwith any program as all the icons are now even he doesnot open if I open with any media, all the icons are of same media now all the icons are same I open any program location Moose because all the shortcuts are the same, please help
Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.
-
Microsoft has suggestions and offerings to
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
-
Moderator Forum Keith has a few suggestions along this line to
-
If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.
-
You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.
-
Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
`
When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.
-
I hope this helps. Good luck.
-
What is an effective way to adjust the position of all the clips on the timeline
In one of my projects, I leave cuts on a timeline. And it seems that the position of a few clips has been accidentally changes. I need to have the same position for all the clips. Is there a way to define the position of all the clips in the world - what is the best way to tacke this? Thanks in advance. -renized
Press A key for the track Selection tool. Click the first clip that you want to settle and every item after that will be also selected. You can move them as a group.
If you need clips on more than a selected track, hold CTRL when you click.
-
VPN site to Site - ASA to PIX - same subnet on the inside
Chaps,
I have a unusual scenario, whereby case I need a tunnel vpn site-to-site between a pix of cisco version 7 and version 8 cisco asa, which have the same subnet ip to each endpoint. Is it possible to create such a tunnel from site to site or do I change one of the remote endpoints?
Thank you
Nick
Hi Nicolas,.
To allow the traffic through the tunnel when having the same at both ends addressing scheme, you should NAT VPN traffic.
That is to say.
Site a 10.1.1.0/24 LAN
Site B LAN 10.1.1.0/24
The site config:
NAT permit list to access ip 10.1.1.0 255.255.255.0 192.168.2.0 255.255.255.0
(in, out) static 192.168.1.0 access-list NAT
license of crypto list to access ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
Site B config:
NAT permit list to access ip 10.1.1.0 255.255.255.0 192.168.1.0 255.255.255.0
(in, out) static 192.168.2.0 access-list NAT
license of crypto list to access ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0
The idea is that Site A will to 192.168.1.0 translatefd when you go to Site B, and Site B will result to 192.168.2.0 when you go to the Site A.
Hope that makes sense.
Federico.
Maybe you are looking for
-
How to Flash with FF26 and Win8.1 work?
I understand that Windows 8.1 control now Adobe Flash, but have been unable to find a way to make Flash work in FF26. Everything I find is a lot of fingerpointing to each company to one of the other companies involved. There is no detailed explanatio
-
Satellite U200-181 - how to add extra RAM?
Hello I have enjoyed my U200-181 lots, but would like to have a few extra in addition to 512 MB, the default installed RAM. How can I do?How many SO-DIMM slots available? Are there instructions for disassembly? Thanks in advance
-
Hello to all 2, Please help me I am new Labview 2 I'm using labview 8.2.1 I want 2 check the date given in the From and to date for the generation of reports. Please help me if anyone knows, I need urgent.
-
Canon MX922: Why won't my scanner scan color photos?
Hello, my Canon MX922 produced copies of any color, but when I scan a color photo, the results of the analysis of a color photo are only in black & white, even when I push the Start button 'color' to scan. However, the scanner will produce color doc
-
Speech recognition at startup error message
An error occurs quickly in speech recognition at the beginning of loading up to