SamlToken is not valid

We are running in an environment of 5.5 and have met a new error on a regular workflow. We have a workflow planned that runs every minute and ran for 30 days before you start fault. The workflow pulls data from a database, running a separate workflow based on the results of the database, then updates the database with the State of the running workflow.  The error that we began to receive is "cannot run workflows: bad credentials." SamlToken is not valid. "I am able to create a new instance of the same workflow planning, and it works perfectly fine.  If I try to resume the flow of original work in the Task Scheduler, it will fail.

Has anyone go through this problem or something similar before?  Is there any type of set timeout somewhere who will only accept a regular workflow to operate for 30 days at a time?

Thank you

Dan

UNIQUE authentication tokens have lease expiration configurable on the SSO Server default is 30 days.

While the vCO is running, he is making sure to renew them before they expire. 5.5.1 contained an issue preventing to correctly renew the chips.

I recommend upgrading to 5.5.2 if it is a viable alternative. You can use above provided patch 5.5.1

Tags: VMware

Similar Questions

  • Unlocked IPhone, SIM card is not valid problem

    Hello

    I went to study in the United States for a few months and I bought the iPhone 6s 'apple Store' to the United States.

    After that I came back to Thailand, I can't use my card SIM Thai (AIS network). It appeared that the sim card is not valid.

    I had to call apple care to solve the problem for me and after gave them my IMEI, they told me to contact verizon wireless to unlock my phone.

    So far, I confused altogether since I bought the Apple Store iphone, not Verizon.

    However, I contacted verizon wireless and even once, after gave them my IMEI, they said that since

    the unit was purchased third-party (which is apple Store) so that the device has not been locked by their network.

    I tried to restore my device so many times and also with the mode of recovery, but it still can not use.

    I checked with APPLE and they said that my device is unlocked model.

    Note that first sim that I plug when I got this device is ATT SIM card.

    I was contacted to ATT and they also said that my device has not been locked

    through their network.

    Please give me suggestions on how to solve this problem

    It seems that if you have the iPhone version, intended for use on the Verizon network. If so, it is not locked. However, this does not mean that it will work on the network in your country.  Phones, designed to run on the Verizon network use strips of LTE 13, 4 and 2. It seems that the AIS uses 3 and 1.

    https://en.Wikipedia.org/wiki/List_of_LTE_networks

    https://en.Wikipedia.org/wiki/List_of_LTE_networks_in_Asia

  • My account is not valid for use in the US store?

    I m currently living in the United States but I can not buy certain items in apple store, it's always say that "your account is not valid for use in the US store" (mine is Vietnamese store). Is there anyone know how to solve this problem. Thank you

    If you are currently in the United States, then you must have a credit card US, with an address of billing in the United States, and then you can change for the US store. Without it, you wouldn't be able to change.

  • I opened a new tab, but the boxes disappeared and comes with "the address is not valid.

    I opened a new tab and it used to show my recent history in about 12 boxes but now I get this:

    "The address is not valid

    The URL is not valid and cannot be loaded.

    Oh dear.

    Unfortunetly, you'll have to do a clean reinstall of firefox.

    https://www.Mozilla.org/en-GB/Firefox/new/

    Don't forget to restart your PC inbetween facilities

    Good luck

  • When I click on my icon of firefox homepage says "the address is not a valid URL. The URL is not valid and cannot be loaded. How can I fix it?

    When I downloaded Mozilla Firefox and clicked on the Firefox icon I get this message on the Firefox homepage "the address is not valid.

    The URL is not valid and cannot be loaded. "I can always access the internet but what do I do to get rid of this message. The home page does not display the icon of firefox.

    You can check the setting of the homepage:

    • Tools > Options > general > startup: Homepage

    Firefox supports several home pages separated by ' |' symbol (pipe).

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe
  • I received a signed email (signed by IdenTrust) Thunderbird said the signature is not valid. It says that I do not trust the CERT authority. Help please.

    I sent an email signed by my work at home (which uses Thunderbird). I can read the email ok but get the following certificate error message:

    This message contains a digital signature, but the signature is not valid. The certificate used to sign the message was issued by a CA that you do not trust to issue this type of certificate.

    The issuing authority is: IdenTrust ECA 3

    How can I alleviate this problem? I need send emails encrypted back, but without this work, it is impossible.

    Thanks in advance.

    You must have the root CA cert in the store of certificates of Thunderbird on the References tab.
    The error message indicates that the cert is, but you need to change the trust.

  • Keyword not valid non-atome

    Hello

    I use TB 24.7.0.
    Something weird is happening today with tuberculosis.
    I have some configuration of filters to assign specific tags for the incoming mails. Everything was fine until today.
    What is more strange is that I didn't tamper with all filters, options or anything today or recently.
    I guess that is not yet what triggers, but certainly when a new message arrives, or when I just browse even though records emails, tags are suddenly deleted, and all e-mails have 0 tags.
    The same behavior is also in safe mode.

    I tried to compact the Inbox folder, and I got an error like this:
    The current operation on "Inbox" has failed. The e-mail server for the account [email protected] responded: invalid non-atome 'blablabla' keyword (this is one of the tags that I use)
    I understand there's a problem with Gmail, but the tags are stored on Gmail? I have although they where to store locally.

    If someone has an idea why this phenomenon happens, or have any trouble, let me know.

    Thank you
    Alex

    Thanks Matt,

    Seems that Gmail does not like my tag IDs. I got something like:
    "[category] _tagname ' and the characters '[' and '] ' are not valid.
    I used 3 years like that, I do not understand why now are suddenly invalid.
    In any case, I created them again with only alphanumeric characters (just rename does not work) and change my filtering with the new tags. Now works correctly.
    Of course, all of my old emails is remained tagged with the old tags. Well, a minor inconvenience, I'm just glad works.

    Good day to you all,.
    Alex

  • After the upgrade to FireFox 30, we can access is no longer internal websites. He gives us 401 - non authorized: access denied due to credentials not valid.

    What is happening on our internal websites used to ask for a window to enter your credentials. This is not is no longer the case.

    It comes immediately gives us a

    401-Unauthorized: access is denied due to credentials not valid.
    You don't have permission to view this directory or page using the credentials you supplied.

    Hello, this is perhaps due to the deactivation of some insecure authentication protocols in firefox 30: https://www.mozilla.org/en-US/firefox/30.0/releasenotes/#whatsnew

    You can try to enter Subject: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named network.negotiate - auth.allow - insecurity-ntlm-v1. Double-click it and change its value to true.

  • My keychain.app file says that is not valid.

    My keychain.app file says that it is not valid, only so I can't change anything. I tried the permissions, but make the message of invalid file again.  How to recover a file invalid or difficulty that causing trouble? I checked the time machine, but it's not far enough.

    Hi manferret!

    It is important to have door key works properly, so I'm happy to help you!  Although the title of this article deals with a different situation, this is what I would recommend since you see this error:

    If your Mac keeps asking for the password in the keychain

    Please take contact with Apple Support communities.

    See you soon!

  • The address is not valid problem when opening new tab

    opening of firefox (I crash usually close under Task Manager), it reloads all tabs as it should.
    But when you open a new tab, I get "the address is not valid.
    I tried all the parameters of the start of the blank home page and latest opening option.
    I have tried all suggestions in other markets, reset... Subject: config
    I wish it had a document giving detailed information for all parameters
    When on the topic: config and search newtab, the only user adjustment (not default) is
    browser.newtabpage.storageVersion; 1 and I tried 0,1,2,3,4,5 restart no change even between the two.
    Have been re-intall, reset, safe mode, nothing works
    the tab works normally after the error, which means that I can start typing in the address bar and even complete works of auto... I restarted just fz and he did a 27.0.1 update
    that did not fix it either... I'm bored of the default page of fx that has recent photos.


  • I get the following message when you use Safari and Firefox. Works in Chrome: "we're sorry, the link that brought you to this page is not valid."

    I'm working with my bank account online and I get to the homepage very well. When I select the online banking, estatements, I get the following message when it tries to link to the electronic statement page.
    "We're sorry, the link that brought you to this page is not valid." Chrome has no problem displaying this page, but Firefox and Safari gives me the same message.

    Note that I posted this already above, but don't not checked if she was tried.

    You may need to allow cookies from third party (visited or all).


    To view the history settings and cookies, choose:

    • Firefox > Preferences > privacy > Firefox will be: "use the custom settings for history".
  • "The document is not valid. The index.xml file is missing.

    I suddenly can't open one of my docs of numbers. I get a msg "'name of the doc' document is not valid. The index.xml file is missing.  I literally had the open document this morning without problem, closed, tried to reopen and now I get this msg... all in the same session of the computer. It began not after an update or anything like that, right in the middle of a session of the computer.  You seem to affect all the docs of numbers.  I can't open an any of them now.  I am running OS X El Capitan Version 10.11 and numbers 09, Version 2.1.

    Hi jg,.

    The case usual this message, it is that the document has been opened in numbers version 3.xx, which converts it into a new file version that uses the file index.xml internal requested by Numbers ' 09.

    You have 3 numbers installed on your machine? This file has already been opened in this application?

    The file was saved to iCloud or opened by the iOS version numbers or numbers for iCloud?

    Recommended 'cure' is to open the file using the 3 numbers, then save as... or export to format Numbers ' 09. As a result, remember numbers to quit smoking (v3) - menu numbers > numbers to quit smoking; by clicking on the red light closed the file, but doesn't end numbers. So avoid open numbers files by double-clicking on the file itself.

    Instead, start Numbers ' 09 (v2.3) and open the file in the application.

    Kind regards

    Barry

  • I have Firfox 18.0.1. On a single Web site my usercode and password entries are considered not valid. The same words and password work fine in IE and Google.

    On a single Web site my usercode and password entries are considered not valid. The same words and password work fine in IE and Google.

    I found that my Norton Toolbar had been disabled so I enabled it. When I tried the site it worked. Go figure.

  • I can't get my default address bar, whenever I try to do a search for it a message pops up saying that the address is not valid, that the URL is not valid

    I'm sure that you when it is able to search from the location bar, however I can't do that. If you just type a Word, a message appears saying it was not valid, or a valid url. If you type in a word associated with a web page, it will go to this page... for example, if you type in the fire engine, I get the message, but if I type in snopes, it goes to www.snopes .com

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do not click on the reset button on the start safe mode window or make changes.

    One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

    Do a clean reinstall and remove the Firefox program folder before reinstalling a new copy of Firefox.

    Download a new copy of Firefox and save the file to the desktop.

    Uninstall your current version of Firefox, if possible, the settings in the software security and cleaning of the Windows registry.

    • Do NOT remove the data personal when you uninstall your current version of Firefox, because all profile files will be deleted and you will also lose your personal data such as bookmarks and passwords from other versions of Firefox profiles.

    Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

    Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

    If you keep problems also create a new profile.

  • URL invalid the requested URL ' / ', is not valid. Reference #9.a2fc54b8.1345130184.5cbbba6

    At least once a day on my work PC Desktop I type in Yahoo.com or Amazon.com or any other popular site valid and all of a sudden, I get the error message "Security Exception" and when I select to confirm then I get:

    "Invalid URL".
    The URL requested ' / ', is not valid.

    "Reference #9.a2fc54b8.1345130184.5cbbba6.

    At that time there cannot access this site at all. So, I have to erase all history and restart my computer, at least once a day and hope it works. I scanned the support forum and I did everything what they suggest: disabled all addons (no not that I still), reset Firefox, restart in safe mode. Nothing works, it's very frustrating. She totally interrupts my work day. Help!

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    See also:

    You can try to reset (power off / on) of the router.

    One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

    You can also do a check of malware with some digitization programs of malicious software on the Windows computer.

    See:

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

Maybe you are looking for

  • RAW processing

    When you assign RAW as master (in OS, IOS does not show RAW) and make changes, these changes are also made to the JPG version. It's stupid, because the changes that you can ask the most likely RAW version do not improve the JPG version. Is it possibl

  • BUGCODE_USB_DRIVER error

    Hi, I keep getting Blue error BUG_CODE_USBDRIVER, STOP 0x000000FE when I start to the top of the screen. I got the page http://support.microsoft.com/kb/2547549 Microsoft Web site to download the patch to fix the problem. But I can't download the file

  • Unable to send photos. popup insists on the fact that I am not connected to the internet.

    UNABLE TO SEND PHOTOS. Popup INSISTS ON THE FACT THAT I AM NOT CONNECTED to the INTERNET, EVENTHO I AM? 1 HP PRESARIO.  2. WINDOWS XP.  3 NOT CONNECTED TO THE INTERNET.  4 NO.

  • license transfer for CS3 Premium

    I need to transfer ownership of a product

  • Bleed between two pages?

    Hello users of Indesign.I have a question from beginner on Adobe Indesign. I have to make my first book. I wached a lot of Youtube video on Indesign works. I know that you must set a bleed on the pages. What I have to deal with bleeding between two p