Sampling OR 9205 if rate not specified

Similar Questions

• Synchronization of data from different sample of data acquisition rate

  I use a high RT 8135.  I'm sampling of signals from analog pressure thermocouples to 20 ms and 10 ms.  I use the stream network to transfer the data from the SMU on my host.  I would like to be able to synchronize the timestamps of all data to the 1ms sampling note and record in a file.

  Search in the file my sampling data 10ms end timestamp does not match the timestamp of 20ms, missing data... I know you have empty queues to get the rest data but is possible to interpolate any data to adapt a unique timestamp?

  Thank you!

  Hi aokada09,

  Looks like you are facing problems resulting from parallel execution two loops you have.  There is nothing necessarily bind the two loops together, so that each of them an iteration at the rates you specified, but are allowed to start each software (sort of random) dictates that they start.

  To get a solid synchronization, share a sample between the two measures clock, but run the sample clock at 100 Hz for 50 Hz for thermocouple measurement and pressure measurement.  You should be able to use shared inside the SMU chassis backplane clock.  This will be as close as possible to synchronize without using a card of timing.  The only real source of delay/tilt between readings at this point is the physical distance that must travel the clock signal. This will not lead to steep, but there will certainly be some (probably on the scale of the high-nanoseconds or microseconds bass).  This article gives more information about the synchronization and the sample clock:

  http://www.NI.com/white-paper/11369/en/

• Game type "not specified" remove the Windows 7 Explorer game.

  I've seen several forums around this subject, but none of them does not solve my problem.  I have a file in my Games Explorer classified as a type of file "not specified."  I went through several records, including "C:/users / AppData/local/Microsoft/Windows/Game Explorer' and 'C:\ProgramData\Microsoft\Windows\GameExplorer' that do not contain the file I want to delete.  Nothing comes up when I right click on icon, either.

  I found a forum with a link which has been said to have the solution, but the page just says "Service unavailable" page was:

  http://www.SevenForums.com/tutorials/42496-Games-Explorer-folder-delete-game.html

  If anyone happens to recognize this URL, it would be great if you could tell me what he said, except that I'm open to suggestions on other ways to get rid of this icon.

  System Restore solved the problem, I just had to try several times until I got just restore point where the icon has disappeared, but it didn't remove all the others either.  Now the icons under the tabs of Internet Explore are all screwed up (icons wrong showing upwards to the wrong sites), but I suspect that will disappear in time, otherwise I can reinstall IE.

  For those of you who read this message and to use steam, never, NEVER put a shortcut to one of the steam games in the Games Explorer. It won't work, it will take place.

• "parameter f warning not specified running chkdsk in read-only mode" is this normal?

  When you run chkdsk I get the warning "Beware f parameter not specified running chkdsk in read-only mode" is this normal and if not what do I do to rectify.

  If you want that the errors you fixed must run chkdsk /f

  Make sure that you have a backup in case where.

• When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

  When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

  Then, you will need to request Support Intel if the drivers you downloaded were appropriate for your hardware and Windows XP.

• Apple iPod appears as a device not specified in XP

  I plug my ipod usb driver nothing comes up and the machine did not read, I went in devices and printers in Control Panel to start, and noticed he was not specified so I right click on it, went int o properties then it came with harware up above I click on it and it went itno properties if I click on that are entered in pilot and said the necessary driver update so I updated, but then the said device is working properly, but then I noticed poped upward in another unspecified as ipod and I click it and it says MTP. USB and I noticed that the device cannot start when I right click on it and it came with troble shoot wat should I do to download so it can come back to my itunes and when I stick the device in usb to computer to read...?

  Hi reecebaillie,

  ·         If it works much earlier?

  ·         Other devices get detected?

  ·         What is the exact message that you see in Device Manager?

  Check to see if the following is useful.

  Method 1: To update the computer with the latest chipset drivers and check the issue. Log computer manufacturer site to do so.

  Method 2: Check to see if this article helps you.

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

  Method 3: Reinstall the USB controllers. Follow this link to do this.

  Advanced troubleshooting tips for General USB for Windows XP problems

  See also:

  Explanation of error codes generated by Device Manager in Windows XP Professional

• F parameter not specified

  message on my chkdsk shows the parameter F is not specified. I tried to put in the immediate window after chkdsk/f, but he couldn't find it? How can I fix it?

  message on my chkdsk shows the parameter F is not specified. I tried to put in the immediate window after chkdsk/f, but he couldn't find it? How can I fix it?

  You should be typing chkdsk /f (note the space before /).

• My HP printer appears as "not specified" in devices and printers

  Original title: why my HP printer appears as "not specified" in printers and devices?

  Running Windows 7 64 and my computer detect my printer as "unspecified" material under devices and printers, so I'm unable to verify as my default printer.  How can I fix?  Thanks to all those who can help you.

  Sounds like you just pluged in it and has not installed software complete features of HP, which is if your unknown HP printer supports win7

• Cannot run most of the apps and regedit by all means indicated by the path not specified not

  Original title: need help ASAP

  I can't run most applications and by all means regedit it says path not specified

  I tried to do some tinkering with regedit and install an application on another drive instead of C and ended up having failed, but kept a copy of the original registry values.

  set these registry values back and restarted after the problem I

  Hello

  See the second Option in the last link I posted in my last answer (and below here):

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often, these records will help when the OEM recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs. (It can be done on any computer running XP,
  Vista or Windows 7 which has a CD/DVD burner).
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How create a Windows 7 system - free repair disc (must be made on a
  Windows 7 computer running the same 32-bit or 64-bit).
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  
  An installation disc is possible also to use for repair. Of course you would
  Use your own COST (product key).

  How to: What are my options for Windows 7 reinstall media?
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-system/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

  Welcome to the recovery of Microsoft software
  http://www.Microsoft.com/en-us/software-recovery

  See MVP Andre Da Costa message in this thread.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-can-i-download-gatewaywindows7recovery-disc/3c0ecd74-CFC1-4188-89c7-a6bbe8113ee1

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Path not specified

  Try to download some photos from my iphone to my computer windows 7.  While the photos seem begin to download, a message says that some could not be downloaded, and they would be ignored.  At the end of the download, it seemed they had been downloaded but only 6 small videos don't have.  A message also said that a path was not specified.  Anyone know why the photos didn't download?

  When you click on 'Import pictures and videos using Windows', you should see a window like this:

  

  Click on the "Import settings" and the following window should appear:

  

  Click on the button 'Browse' next to two lines "import..." and navigate in the folders where you want pictures and videos to be saved.  Change the other options if you want, and then click OK.

  Now import your images and your videos.

  If you still receive error messages, please provide the full text of each message.

• java.io.IOException: APN is not specified

  Hello

  I saw that this topic was opened at other times, but I don't know if I understand what I have to do.

  First of all, I got this code:

  String url1 = "www.myurl.com;

  con = (HttpConnection), Connector.open (url1).

  is = con.openInputStream ();

  But when I try it in my BB device, I got java.io.IOException: APN is not specified. (Try the code with the blackberry MDS services simmulators email in the works of eclipse Simulator)

  So, as I read somewhere there, I tried this code:

  TransportDetective td =new TransportDetective();

  if ( TransportDetective.isCoverageAvailable (TransportDetective. TRANSPORT_BIS_B) | TransportDetective.isCoverageAvailable (TransportDetective. TRANSPORT_MDS) | TransportDetective.isCoverageAvailable (TransportDetective. TRANSPORT_TCP_CELLULAR) | TransportDetective.isCoverageAvailable (TransportDetective. TRANSPORT_TCP_WIFI) | TransportDetective.isCoverageAvailable (TransportDetective. TRANSPORT_WAP) | TransportDetective.isCoverageAvailable (TransportDetective. TRANSPORT_WAP2))

  {

  String url2 = 'www.myurl.com;

  URLFactory urlFactory =new URLFactory(url2);

  final ServiceRecord defaultTCPSR = td.getDefaultTcpCellularServiceRecord ();

  final String connectionURL = urlFactory.getHttpDefaultTcpCellularUrl (defaultTCPSR);

  HttpConnection conn = (HttpConnection), Connector.open (connectionURL);

  }

  But when I paste in my code, I wonder to create classes of URLFactory and also TransportDetective.

  I looked on the net and I found codes for the class here: http://ecuadorblackberry.ec/?p=425

  But when I try, I get that td.getDefaultTcpCellularServiceRecord () returns a null value, so it does not work.

  The only thing I want, is to connect to a web service from my application, how can I do?

  Thank you

  Sorry one thing yet.

  You have discovered, you can specify the options of AFN directly on the URL.

  Because you are in Spain and will sell to people in Spain only, then you can check the network and provide the correct APN information for this network.  Watch RadioInfo.  You can use

  getCurrentNetworkName()

  and try to match the name, or

  getMNC (RadioInfo.getCurrentNetworkIndex ())

  and look for the associated MNC code and match from there.

  Once you know the network, you can specify the AFN on the URL.

  Who help me?

• Error 25004 config.xml not specified as a configuration xml file is valid must be created during deployment (null)

  Error 25004 config.xml not specified as a configuration xml file is valid must be created during deployment (null)

  Hello niecy1963,

  Thanks for posting on the Microsoft answers Forum.

  If you get this error when you try to install Office 2007, then be sure that you have uninstalled the trial versions of Office from your computer.
  It may be a software problem with an uninstall of Office add-in Microsoft any component snap-in via the control panel. Reset. Then you can reinstall the add-in.

  You can also follow the article below for assistance.
  KB Article ID: 928218 -how do I uninstall manually Office system 2007 if you cannot uninstall it by using the function "Add or Remove Programs".

  If you experience this error with another program and not Office 2007, with more details please reply and we will be happy to help.

  If please give an update and let us know your status.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Leader (?) "Not specified" and the files/folders missing

  I have a strange problem.  I had a folder with files and folders one couple with backups of these files.  Suddenly, everything that is found in this folder is titled 'No' icon and all other files and folders disappeared.  When I try to copy my files into this folder, it says the files already exist, but I showed you the hidden files and system.  When you click the icon not specified, it shows all files, including those located in the subfolders.  I can't move or copy this file (?) not specified.  What is this thing not specified and how to do things the way they were?

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  I hope this helps. Good luck.

• APN not specified on some operators

  Hi all

  I have an application which give me a different answer for some operators. Let's say I have 2 operator, A and B. When I try my app using A, this works well. But when I use it on B, I get a message like: "The Tunnel is not open", or another type of blackberry: 'the APN is not specified. As I read on a document, to solve this problem, I have to enter information to the AFN on my Blackberry setting, but on the same document, I also read that if I use the AFN, it means that I have to pay for internet services (GPRS).

  What should I do if I can use the application on B without APN?

  Can someone help me?

  Thanks in advance.

  Kind regards

  Novan Ananda

  Hello

  According to what you target OS is that I would suggest that you use the ConnectionFactory .

  IF the user does not connect you can point to maybe configure the APN. but with the score could cost him extra.

• WAP2 connection error: APN is not specified

  Hi all

  I hope you can help me with this problem. I have a storm that runs on the Vodafone network. I am trying to connect WAP2 and immediately, I got an ioexception

  java.io.IOException: APN is not specified

  I have read several post on WAP2 and I added to my url "deviceside = true; WAP2 = xxx' where

  XXX = getWap2Uid();

  My getWap2Uid() code is

  public static String getWap2Uid() {}
         
  Reviews [ServiceRecord] is ServiceBook.getSB () .findRecordsByCid ("WPTCP");.
  for (int i = 0; i)< records.length;="">
  {
  ServiceRecord serviceRecord = records [i];
  String recordName = serviceRecord.toString () .toUpperCase ();
  If (serviceRecord.isValid () &! serviceRecord.isDisabled () &)
  serviceRecord.getUid ()! null = & serviceRecord.getUid () .length ()! = 0 &&
  recordName.indexOf("WAP2")! = - 1).
                 
  {
  String uid = serviceRecord.getUid ();
  EventLogger.logEvent (EventLogID, new String ("getWap2Uid, UID =" + uid) .getBytes ());
  Returns the uid;
  }
  }
  Returns a null value.
        
  }

  The event log from the print, I am able to see that xxx = WAP2 trans

  I'd appreciate very much any help on this, because I'm totally stuck

  The suffix should look like this:

  « ; deviceside = true; ConnectionUID =' + uid;