Sampling ports unbuffered streaming

Similar Questions

• Incorrect port sampling frequency 0 on USB6356

  I am constantly sampling port on a USB6356 0 and save the data in an array of 1 d Raw U8. I put a sampling frequency of 1 Mhz, but for some reason, the number of samples in the table is about 3 times larger, so there is no way I can represent data on a time scale.

  No idea why this is happening?

  Although your USB-6356 has only 8 HW timed digital lines, the device returns 32-bit data for each sample.  If you read raw data, you read this, and I'm not surprised, it appears as zeroes interleaved with the data that you are interested in.

  Dan

• HP PAvillion M7U61EA #ABH: HDMI port no longer works

  For the last few days I used the HDMI port to stream video and audio to two different TVs LG and Samsung monitor without problems. Directly into TVs or with an AV processor and even if sound was not always easy, I could run BB iPlayer and Netflixs without any problem.

  Then, from today I don't get the laptop to 'see' the fact that I inserted the HDMI in the laptop. Tried several cables and confirmed that the HDMI inputs on all these devices was still working.

  This did some research on the site of HP, Windows site, but couldn't find a solution. What to do next?

  @JanA1

  revised and updated

  Given that you upgraded to Windows 10

  You may have accepted a Windows 10 update the graphics driver, who stopped the discreet graphics card to function properly. Never install the Intel graphics driver separately on a switchable graphics capable laptop computer. Only the NVIDIA graphics driver HP sofpaq will allow him to work as expected. It's a proprietary driver that is not included in the driver store of the operating system and is not on Microsoft's servers.

  The best solution to solve this problem would be to use the system restore window to restore the operating system to the State prior to the change was made. You lose no and restore photos, or other personal data using the system. It is completely reversible.

• Media Port Mode on a MSE 8510

  Hello

  I would like a confirmation, currently we have a blade in our MSE 8510 and the Media Port is set to HD.

  • This means that we have 20 HD video Ports available (up to 20 endpoints will be able to connect)
  • We have also 20 dedicated ports for streaming.
  • Finally, we have 20 additional voice Ports.

  The problem is that we have a meeting that it will take 26 video Ports, if I put it in the SD, we have about 40 SD video Ports. But no content or audio ports.

  Will be what this means if 26 end points to connect I have 14 left ports and ports audio and content will begin to use my video ports?

  I'd connect 26 people on my MSE 8510, with about 10 people connecting via audio and all end points will receive the content.

  Please see attached picture.

  Yes, if you share your content, will consume you a port video, same thing for one participant audio that connects to the Conference.

• 6000 MXP Cisco only streaming audio

  We have a CODEC MXP6000 in which we try to broadcast the call using stream.sdp technology. We have set up a multicast address and are able to access the page continuously but become audio only. We tried the following:

  Address of the stream of 255.255.255.255

  Update QuickTime on laptop customer

  Tried using VLC

  Tried different ports of streaming

  Toggled the video quality settings

  Firewall disabled on the computer

  There is a proxy which browsers are all pointing to. Is there anything else I could try to get the video streams as well as audio?

  I got it working by using a 1000 MXP.

  I have the streaming settings:

  Address: 224.0.0.0

  Address Port: 22232

  Video Rate (kbps) 320

  Video quality: Motion

  Then I start to broadcast breaking in my Firefox browser on my mac http://ip.address.of.mxp/stream.sdp

  and I get video and audio in my browser (use the quicktime plugin)...

  I couldn't open QuickTime directly on my Mac for a reason any.

• Modes of failure in TCP WRITE?

  I need help to diagnose a problem where TCP communication breaks down between my host (Windows) and a PXI (LabVIEW RT 2010).

  The key issues are:

  1... are there cases where to WRITE TCP, a string of say 10 characters, write more than zero and less than 10 characters for the connection? If so, what are those circumstances?

  2... is it risky to use a 1ms timeout value?  A reflection seems to say that I won't get a timeout in uSec 1000 if we use a database of time 1-ms, but I don't know if this is true in PXI.

  Background:

  On the PXI system, I use a loop of PID-100 Hz, controlling an engine.  I measure the speed and torque and control the speed and the throttle.  Along the way, I am in a position 200 channels of various things (analog, CAN, instruments of TCP) at 10 Hz and sending masses of info to the host (200 chans * 8 = 1600 bytes every 0.1 sec)

  The host sends commands, responds the PXI.

  The message protocol is a type of variable to fixed header, payload: a message is a fixed 3-byte header, consisting of a U8 OpCode and a USEFUL of U16 load SIZE field. I flattened a chain structure, measuring its size and add the header and send it as a TCP WRITE.  I get two TCP reads: one for the header, then I have the heading unflatten, read the SIZE of the payload and then another read for that many more bytes.

  The payload can be zero byte: a READING of TCP with a byte count of zero is legal and will succeed without error.

  A test begins by establishing a connection, configuration tips, and then sampling. The stream of 10 Hz is shown on the home screen for 2 Hz as digital indicators, or maybe some channels in a chart.

  At some point the user starts RECORDING, and 10 Hz data go into a queue for later write to a file. It is while the motor is powered through a cycle prescribed target speed/torque points.

  The registration lasts for 20 or in some cases for 40 minutes (24000 samples) and then recording stops, but sampling does not.  Data are still coming and mapped. The user can then do some special operations, associated with audits of calibration and leaks, and these results are stored.  Finally, they hit the DONE button and the mess is written to a file.

  This has worked well for several years, but that the system is growing (more devices, more channels, more code), a problem arose: the two ends are sometimes get out of sync.

  The test itself and all the stuff before configuration, works perfectly. The measure immediately after the test is good.  At some point after that, he goes to the South.  The log shows the PXI, sending the results for operations that were not opposed. These outcome data are garbage; 1.92648920e - 299 and these numbers, resulting from the interpretation of random stuff like a DBL.

  Because I wrote the file, the connection is broken, the next test he reestablished and all is well again.

  By hunting all of this, I triple-checked all my shipments are MEASURES of the size of the payload before send it.  Two possibilities have been raised:

  1... There is a message with a payload of 64 k.  If my sender was presented with a string of length 65537, it would only convert a value U16 1 and the receiver would expect 1 byte. The receiver would then expect another heading, but these data come instead, and we are off the rails.

  I don't think what is happening. Most messages are less payload of 20 bytes, the data block is 1600 or so, I see no indication of such a thing to happen.

  2... the PXI is a failure, in certain circumstances, to send the entire message given to WRITE of TCP.  If she sends a header promising more than 20 bytes, but only delivered 10, then the receiver see the header and wait more than 20. 10 would come immediately, but whatever the message FOLLOWING, it's header would be interpreted as part of the payload of the first message, and we are off the rails.

  Unfortunately, I'm not checking the back of writing TCP error, because she's never not in my test here (I know, twenty lashes for me).

  It occurs to me as I was him giving a value of timeout 1-mSec, since I am in a loop of 100 Hz. Maybe I should have separated the TCP stuff in a separate thread.  In any case, maybe I do not get a full 1000 uSec, due to problems of resolution clock.

  This means that TCP WRITE failed to get the data written before the time-out expires, but he wrote the part of it.

  I suspect, but newspapers do not prove, that the point of failure is when they hit the DONE button.  The General CPU on PXI is 2 to 5%, at that time there are 12 to 15 DAQ field managers to be close, so the instant the CPU load is high.  If this happens to coincide with an outgoing message, well, perhaps that the problem popped up.  It doesn't happen every time.

  So I repeat two questions:

  1... are there cases where to WRITE TCP, a string of say 10 characters, write more than zero and less than 10 characters for the connection? If so, what are those circumstances?

  2... is it risky to use a 1ms timeout value?  A reflection seems to say that I won't get a timeout in uSec 1000 if we use a database of time 1-ms, but I don't know if this is true in PXI.

  Thank you

  If a TCP write operation times out, it is possible that some data did in fact get placed in the buffer, and it will be read by the other side. This is why there is an output bytes written on TCP Write function, to determine what was actually put in the buffer.

  To account for this, you can proceed as follows:

  1. do an another TCP write and send only the subset of the first package that does not get completely passed. Use bytes written to Get String subset for the remaining data.

  2. start with greater delays.

  3. in the case of a timeout, the close link and force a reconnection so that the data of the partially filled buffer not get transformed by the other side.

• Audio HTML5 Autoplay WebWorks or play on click

  It is specific for the BB - works great on the PB.

  How do you get the HTML5 Audio tag to work in an app with the AutoPlay option webworks?

  Ex: The Audio clip CBC modified via javascript, then I load then audioElement.play () - this does not work, you must bind the click of another link or button audioElement.play (), and then click NEW...

  Any ideas?

  function playSongNow (currentID) {}
  var support = document.createElement ('audio');
  audioElement.setAttribute ("autoplay", "true");
  audioElement.setAttribute (' preload ',' true' ");
  audioElement.setAttribute ('src', 'http://' + sessionStorage.url + ':' + sessionStorage.port + ' / rest/stream.view? u =' + sessionStorage.user + '& p =' + sessionStorage.pass + '& v = 1.6.0 & c = BerrySonic & id =' + currentID);
  audioElement.load ();
  audioElement.addEventListener ("canplaythrough", function() {}
  audioElement.play ();
  $(".duration_span").html (audioElement.duration);
  $(« . Filename span") .html (audioElement.src);
  (}, true);
  {$('.play').click (function ()}
  audioElement.play ();
  });
  {$('.pause').click (function ()}
  audioElement.pause ();
  });
  {$('.volumeMax').click (function ()}
  audioElement.volume = 1;
  });
  {$('.volumestop').click (function ()}
  audioElement.volume = 0;
  });
  {$('.stop').click (function ()}
  audioElement.pause ();
  audioElement.currentTime = 0;
  });
  {$('.playatTime').click (function ()}
  audioElement.currentTime = 35; Try to jump so used 35
  audioElement.play ();
  });
  }

  This has worked for me since

  function playSongNow(currentID) {
      $('#song-loader').show();
  
      var audioElement = document.createElement('audio');
      audioElement.src='http://' + sessionStorage.url + ':' + sessionStorage.port + '/rest/stream.view?u=' + sessionStorage.user + '&p=' + sessionStorage.pass + '&v=1.6.0&c=BerrySonic&id=' + currentID;
  
      audioElement.load();
  
      audioElement.addEventListener('ended', function() {
          //alert('ended');
      });
  
      audioElement.addEventListener('canplay', function() {
          audioElement.play();
          $('#song-loader').hide();
          $('.play-pause').attr('id', 'pause-song');
      });
  
  }
  

  For some reason any canplaythrough on the BB just doesn't work. Basically here I click a song and it works.

• Import a workflow with Orchestrator rest API

  Hello

  I am trying to import a workflow to Orchestrator through the REST API, but it always end upward with a 500 error:

  HTTP/1.1 100 continue
  HTTP/1.1 500 Internal Server Error
  Content-Type: text/html; charset = utf-8
  Transfer-Encoding: segmented
  Date: Thu, February 28, 2013 16:54:57 GMT
  Connection: close
  Server: vCO Server
  I proceed in this way:
  I prepare the file that will be sent:

  -5bf10fbcf09

  Content-Disposition: form-data; name = "listVm"; filename = "listVm.Workflow"

  Content-Type: application/zip

  Binary

  -5bf10fbcf09-

  and then make a POST request to my server of vCO:
  curl - ik u "user: pass" h "Accept: application / xml ' h ' Content-type: multipart / form - data; "limit = - 5bf10fbcf09 ' h ' content-length: 19442 ' https://IP:PORT/api/stream / x POST @listVm.wf d
  Then it'll wait state:
  HTTP/1.1 100 continue
  and about 60 years later it returns me an error 500
  Thanks for your help!

  Here is a code that a workflow is important in a category:

  SessionFactory VcoSessionFactory = new DefaultVcoSessionFactory (new URI ("https://vcohost:8281 / api")) {}
  @Override
  protected SSLContext newSSLContext() throw KeyManagementException, {NoSuchAlgorithmException}
  Return newUnsecureSSLContext();
  }
  @Override
  protected HostnameVerifier {} newHostnameVerifier()
  Return newUnsecureHostnameVerifier();
  }
  };
  This is for basic authentication in the what the vCO is in LDAP mode
  Authentication Authentication = new UsernamePasswordAuthentication ("userName", "password");
  It is to the SSO authentication
  Authentication Authentication = null;
  try {}
  SsoAuthenticator authenticator =
  new SsoAuthenticator (new
  URI ("https://ssoHost:ssoPort/ims/STSService?") WSDL"), sessionFactory,"
  1800 l);
  Authentication =
  authenticator.createSsoAuthentication ("userName",
  "password");
  } catch (IOException e) {}
  throw new RuntimeException ("Cannot authenticate to the OSP", e);
  } catch (URISyntaxException e) {}
  / / There are unlikely to occur
  // }
  Session VcoSession = sessionFactory.newSession (authentication);
  WorkflowService wfService = new WorkflowService (session);
  wfService.importWorkflowInCategory ("categoryId", new file)
  'path_to_some_workflow.workflow'));

  I have this code I use only the customer is provided with vCO:

  https://vcohost:8281/API/docs/downloads.html

  Hope this helps

  Concerning

  Ivan

• connectionError with out-of-the-box fms 3.0.1

  Hello
  We just installed the latest version of fms on debian, but we cannot get h.264 vod to work.
  the Setup program's default, and we used vodtest.swf of samples / applications to stream videos from the sample in applications/vod/media.
  Sample.FLV and AdobeBand_640.flv works fine (VP6 codec).
  AdobeBand_300K_H264.mp4, AdobeBand_800K_H264.mp4 etc. all fail with a "connectionError".
  I tested with autonomous 9.0.124 & plugin & standalone 9.0.115 plugin on both windows xp and mac os x 10.5.2, across the same problem.
  Thanks for all the ideas,
  KOB

  OK, here's the solution, which was not too obvious, judging by the amount of responses that I myself :)

  for h.264 videos, the path should look like this:

  RTMP://localhost/VOD/ mp4:mymovie.mp4

  wonder why the end of file is not enough information to the server see it is a mp4 file? This type of url looks like little ugly for me...

• HP Jet Mini 200-010: [HP Stream Mini 200-010] USB all ports have been disabled accidently

  Hello

  I just my HP Mini 200-010 stream. After playing around the BIOS, I accidentally disabled all USB ports, cause he said something like "USB security", a very misleading name. Now my keyboard will not be recognized. And there is no PS/2 port. Fortunately, I have a bluetooth mouse, but how can I access the settings of the BIOS without keyboard? Please help, because it was such a serious obstruction, I can't do anything with my Mini flow more.

  Thank you very much

  R

  Hello

  The motherboard seems to have jumpers to clear the CMOS memory, but I hope that there is another way to avoid having to open the computer.

  http://support.HP.com/es-ES/document/c04545792

  See the documentation for you

  http://h10032.www1.HP.com/CTG/manual/c04519197

  First contacts

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  HP Pavilion Mini 300 desktop and desktop HP Stream Mini 200 (Product life end disassembly instructions)

  Kind regards.

• Need help with the port forwarding for a XBox remote Streaming

  I have a router R6200v2 and need help with port forwarding.

  I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere

  http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/

  I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.

  Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?

  Hi @varxtis,

  You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.

  1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)

  2. Select the type of service (TCP, UDP or both)

  3 entry 5050 times a start external Port and external endpoints.

  4. Select the IP address of your XBOX.

  5. Select apply.

  6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.

  Kind regards

  Dexter

  The community team

• Why can I not make a continuous sampling of port 0 on USB 6216?

  I have a USB-6216 of NOR. I try to capture digital signals using port 0. However, the only way that I can function is samples on request. If I select N samples or continuous sampling, I get the following in the DAQ SignalExpress Wizard error message both Labview 2011. What I'm not doing correctly?

  Error-200077 occurred to the DAQ Assistant
  
  Possible reasons:
  Requested value is not supported for this property value. The value of the property may be invalid because it is in conflict with another property.
  Property: SampTimingType
  
  Requested value: sample clock
  
  You can select: on request
  
  

  
  

  The 6216 not having a sample for the e/s digital clock as you can see from reading the specification, every time you try to use one, you will get this error message. Thus, in LabVIEW, whenever you want to do a reading, you must call a single value DAQmx Read mode single sample (or the DAQ Assistant, configured the same way). How many samples per second you take is going to be highly variable due to windows being nondeterministic.

• M3u8 sample Live Streaming HTTP plays don't not - stand-alone JavaFX 2.2.7 for java 1.6.0.32

  Hi all
  I searched high and low on the here and the wild wild web, but cannot find any support for my problem.

  I was testing my code of JavaFX2.2.7 Media Player based in a common Java 6 application when I discovered that HTTP Live Streaming does not seem to work.  I can play a local file of the format supported (Sintel trailor mp4 h264), but when I try and use a stream of Live HTTP instead, nothing plays. (for example http://download.oracle.com/otndocs/products/javafx/JavaRap/prog_index.m3u8 ).  I find myself with an empty drive and no exceptions or errors.

  private final static String MEDIA_URL = " " http://download.Oracle.com/otndocs/products/JavaFX/JavaRap/prog_index.m3u8 "; "

  Media = new Media (MEDIA_URL);

  MediaException ex = media.getError ();

  If (ex! = null) {}

  System.out.println ("Media error" + ex.getMessage ());

  } else {}

  System.out.println ("no media error");

  }

  Program the output to the console: "No. Media Error.

  I thought it was something wrong with my Player code, as a last resort, I went to JavaFX 2 - together and copied from the source and put it directly in my application and it ran... Unfortunately occurs the same result. The player runs, but simply shows a video window empty.  Controls are available, but the video plays.

  Based on the release notes for Java 2.2.7 that I was under the impression that HLS has been supported.  Am I incorrect?

  I can't upgrade to Java 7 because I'm firmly stuck with Java 1.6.0.32 for lack of project.

  Can anyone provide any assistance would be greatly appreciated.

  Post edited by: 2b18d6de-8200-4adc-a82a-88fc0451f448 I've updated for JavaFX 2.2.21 and this has not fixed the problem.  The result is exactly the same.  No exceptions, no error and no video...

  My Conclusion: Http Live Streaming does not seem to work with JavaFX 2.2.7 or 2.2.21.

  I've proved since the problem lies with 2.2.7 JavaFX and JavaFX 2.2.21, and that by using the new JavaFX comes with Jre7 solves the problem.

  I created a completely new and added that the JavaFX jars comes with 7 project JRE on my road to build.  I copied the code from http://download.oracle.com/otndocs/products/javafx/2/samples/Ensemble/index.html#SAMPLES/Media/Streaming%20Media%20Player and it works.

  So, I made a few changes on my original Java Eclipse project.

  Removed the build path:

  -C:\Program Files (x 86) \Oracle\JavaFX 2.2 Runtime\lib\jfxrt.jar

  -C:\Program Files (x 86) \Oracle\JavaFX 2.2 Runtime\lib\javaws.jar

  -C:\Program Files (x 86) \Oracle\JavaFX 2.2 Runtime\lib\plugin.jar

  -C:\Program Files (x 86) \Oracle\JavaFX 2.2 Runtime\lib\deploy.jar

  Added to build the path:

  -C:\Program Files (x86)\Java\jre7\lib\jfxrt.jar

  -C:\Program Files (x86)\Java\jre7\lib\javaws.jar

  -C:\Program Files (x86)\Java\jre7\lib\plugin.jar

  -C:\Program Files (x86)\Java\jre7\lib\deploy.jar

  Always using the 1.6.0_32 Java runtime, I ran my application and everything worked.

  Of course, this will be like a giant hack. I am disappointed by the release notes for JavaFX 2.2.7.

  NOTE: To export my request as an executable Jar, I also had to pull the related JavaFX ".dll" JRE 7 libraries and add them to the java.library.path (using script commands) before running the jar.

• F4V is unable to play the test\stream\_definst_\sample

  I would like to divide in another folder by name, so I build a lot of document under _definst_

  I can't play flv vedio applications\test\stream\_definst_\sample and f4v (mp4) does not

  can someone tell me what problem which causes and helps me solve it ~ thx a lot ~!

  (FMS4.5)

  Play f4v or mp4, you must give the mp4: before tag at the beginning of the name of the stream. For example if you have a mp4/f4v _definst_/sample, give you the name of the stream as "mp4:sample / video.mp4" or "mp4:sample / video.f4v". Maybe you are him giving as "sample / mp4:video.mp4", which will not work.

  I hope this helps.

• How to find, separate and convert hexagonal channels streaming via the com port?

  Hello

  I have a xbee wireless network set up with 3 sensors. Output 1 (23bytes) at 20 Hz, the other 2 (46bytes) to 1 Hz. The data arrives correctly in the computer and I can see the stream on my read series VI (joint) basis. on my software XCTU (terminal program that comes with the wireless nodes), the console displays the packets received:

  22/08/2016 13:36:04.196, 6126, RECV, 7E00178100002B00205A203030303230207A2030303031350D0A00
  
  22/08/2016 13:36:04.252, 6127, RECV, 7E00178100002B00205A203030303230207A2030303031350D0A00
  
  22/08/2016 13:36:04.296, 6128, RECV, 7E00178100002B00205A203030303230207A2030303032300D0A04
  
  22/08/2016 13:36:04.346, 6129, RECV, 7E00178100002C00205A203030303230207A2030303032320D0A01
  
  22/08/2016 13:36:04.346, 6130, RECV, 7E00178100002F00205A203030303230207A2030303032320D0AFE
  
  22/08/2016 13:36:04.436, 6131, RECV, 7E002E81000032004F20303230362E332054202B32352E38205020313031382025203032302E3237206520303030300D0AC4
  
  22/08/2016 13:36:04.436, 6132, RECV, 7E00178100003200205A203030303230207A2030303032300D0AFD
  
  22/08/2016 13:36:04.486, 6133, RECV, 7E00178100003600205A203030303230207A2030303031350D0AF5
  
  22/08/2016 13:36:04.536, 6134, RECV, 7E002E81000032004F20303230362E362054202B32362E38205020313031392025203032302E3237206520303030300D0ABF
  
  22/08/2016 13:36:04.596, 6135, RECV, 7E00178100003800205A203030303139207A2030303030380D0AE9
  
  22/08/2016 13:36:04.596, 6136, RECV, 7E00178100003300205A203030303138207A2030303030380D0AEF
  
  22/08/2016 13:36:04.652, 6137, RECV, 7E00178100003100205A203030303139207A2030303032320D0AF4
  
  22/08/2016 13:36:04.652, 6138, RECV, 7E00178100002F00205A203030303139207A2030303032340D0AF4
  
  22/08/2016 13:36:04.738, 6139, RECV, 7E00178100002F00205A203030303139207A2030303032310D0AF7
  
  22/08/2016 13:36:04.786, 6140, RECV, 7E00178100003000205A203030303139207A2030303032300D0AF7
  
  22/08/2016 13:36:04.836, 6141, RECV, 7E00178100003200205A203030303139207A2030303032320D0AF3
  
  22/08/2016 13:36:04.886, 6142, RECV, 7E00178100003200205A203030303139207A2030303031380D0AEE
  
  22/08/2016 13:36:04.946, 6143, RECV, 7E00178100003200205A203030303139207A2030303031330D0AF3
  
  22/08/2016 13:36:04.996, 6144, RECV, 7E00178100002E00205A203030303138207A2030303031310D0AFA
  
  22/08/2016 13:36:05.046, 6145, RECV, 7E00178100002C00205A203030303138207A2030303031360D0AF7
  
  22/08/2016 13:36:05.096, 6146, RECV, 7E00178100002C00205A203030303139207A2030303032350D0AF6
  
  22/08/2016 13:36:05.146, 6147, RECV, 7E00178100002E00205A203030303138207A2030303031340D0AF7
  
  22/08/2016 13:36:05.146, 6148, RECV, 7E00178100002F00205A203030303138207A2030303031330D0AF7
  
  22/08/2016 13:36:05.236, 6149, RECV, 7E00178100003000205A203030303138207A2030303032300D0AF8
  
  22/08/2016 13:36:05.286, 6150, RECV, 7E00178100003300205A203030303138207A2030303032320D0AF3
  
  22/08/2016 13:36:05.346, 6151, RECV, 7E00178100003700205A203030303138207A2030303031360D0AEC
  
  22/08/2016 13:36:05.396, 6152, RECV, 7E00178100003900205A203030303138207A2030303031320D0AEE
  
  22/08/2016 13:36:05.446, 6153, RECV, 7E002E81000032004F20303230362E332054202B32352E38205020313031382025203032302E3237206520303030300D0AC4
  
  22/08/2016 13:36:05.446, 6154, RECV, 7E00178100002A00205A203030303138207A2030303031360D0AF9
  
  22/08/2016 13:36:05.506, 6155, RECV, 7E00178100002600205A203030303138207A2030303032320D0A00
  
  22/08/2016 13:36:05.506, 6156, RECV, 7E00178100002300205A203030303138207A2030303031380D0AFE
  
  22/08/2016 13:36:05.566, 6157, RECV, 7E002E8100002E004F20303230362E362054202B32362E37205020313031392025203032302E3237206520303030300D0AC4

  Since it is an endless stream of hexagonal channels, how can I isolate each of them so that I can convert them then their values digital sensor to plot, display, etc.?