Samsung NC10 problem... error c000021a... Help

Similar Questions

• I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found." Can help you!

  Original title: cannot find awuvomas.dll

  I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found."  Can help you!

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Dear Sir, our creative cloud need updating, but always after 70 or 80% update, update stopped creative cloud - (display an error - 184 fetal. How can I solve this problem. Please help me...

  Dear Sir, our creative cloud need updating, but always after 70 or 80% update, update stopped creative cloud - (display an error - 184 fetal. How can I solve this problem. Please help me...

  Please visit get the following message appears when you try to install Illustrator 2015: Exit Code 184

• Error 100, help solve this problem?

  Error 100, help solve this problem?

  Hello

  Error 100 usually comes when the download wizard is not able to communicate with the Adobe.com site. Please follow the given ko: http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assista nt.html #main_Solution_1 for more information.

  Such direct download suggested by Mylenium try.

  Kind regards

  Romit Sinha

• Problem error failed to set KB2345886. It's a real headache! help, advice appreciated.

  Problem error KB2345886

  See the following topic for your question

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c82fa2ea-6c79-49D1-9AF1-c5c13287dea9 >

• Unrecoverable system error! Help, please!

  I left my computer for 5 minutes, when I came back I got a blue screen with STOP

  Fatal error c000021a session initial system or process system ended unexpectedly with status 0 (xC0000001) (0x0010037c). I get a blue screen and my screen of the homepage is very low. Help ASAP!

  Christine

  Hi Siciliangal,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are getting BSOD error message "c000021a fatal system error '. I'll be happy to help you with this problem.

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS.

  -Did you do changes on the computer before this problem?

  Method 1:

  Last known good configuration

  It's a Windows startup option that uses the most recent system settings that worked correctly. Whenever you turn your computer off and Windows shuts properly, important system settings are saved in the registry. If a problem occurs, you can restart your computer using these parameters. For example, if a new driver for your video card is at the origin of the problems, or an incorrect registry setting is preventing Windows from starting correctly, you can restart your computer by using the last good known Configuration.

  1. remove all floppy disks, CDs, and DVDs from your computer and restart your computer by clicking theStart button, clicking the arrow next to the shut down button, and then clickingrestart.

  2. do one of the following:

  · If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by stopping and restarting your computer.

  · If your computer has more than one operating system, use the arrow keys to select the operating system you want to start, and then press F8.

  3. in the display Advanced Startup Options , use the arrow keys to selectlast known good Configuration (Advanced), and then press ENTER.

  4. If your computer has multiple operating systems installed, use the arrow keys to select the operating system that you want to start using the last good known Configuration, and then press ENTER. Windows will then resume starting normally.

  Method 2

  CHKDSK (Chkdsk.exe) is a command-line tool that checks volumes for problems. The tool tries to repair any that it finds.

  1 boot from the DVD.
  2. Select the language.
  3. click on "Repair your computer" on the install now screen.
  4. click Next in the System Recovery Options screen.
  5. click on command prompt.
  6 type the command chkdsk and press ENTER.

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 3

  Offline system restore.

  1 boot from the DVD.
  2. Select the language.
  3. click on "Repair your computer" on the install now screen.
  4. click Next in the System Recovery Options screen.
  5. click on system restore.
  6. choose the date that you want to restore.

  See this link for more information.
  A Windows Vista computer that has a partition to the Windows recovery environment (Windows RE) is not restored successfully using Windows complete PC Backup and Restore
  http://support.Microsoft.com/kb/946010

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• 80072efe I have Vista Home Premium and I can't download updates it keeps giving me this error code help!

  80072efe I have Vista Home Premium and I can't download updates it keeps giving me this error code help!

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  Service Pack 2 is installed? If it has been...
  How long this update problem occurred?
  What is the suite of security/antivirus installed and is a 3rd party firewall used?
  The current AV subscription and it detects malicious software the last time that the system has been analyzed?

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  You can reset the Windows Update components by running the Fixit on this page. But, if there is malware present, she will continue to reset the connection to the update servers:How to reset the Windows Update components
  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:
  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Vista firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  MowGreen Services update - consumer safety

• Host process generic for win 32 services has encountered a problem error message

  Host process generic for win 32 services has encountered a problem error message. How to fix

  Hi MarkGanbucci,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. That you receive the error message?

  See the Microsoft articles below and check if it helps.

  Generic host process error message and a flashlight icon appear

  http://support.Microsoft.com/kb/821690

  Error messages when you start a Windows XP-based computer and then try to download Windows updates

  http://support.Microsoft.com/kb/931852

• Disk problem error message: has: / is not accessible. No ID address mark was found on the floppy disk.

  Disk problem error message: has: / is not accessible. No ID address mark was found on the floppy disk. I am new to the computer world and that you just want to remove info a diskette and put the information on a CD. Can someone help me please?

  Hello
   
  
  1. are you able to use the other disks?
  2 have you tried to use this disk on another computer?
   
  The article below explains this error message. It is possible that data on the floppy drive went bad. I ask you to check whether the floppy drive works on another computer.
  Quick format in no. ID address mark results found
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;130627
   
  
  Hope this information is useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows xp error c000021a

  When I connect my laptop I have a system fatal error c000021a

  computer does not start!

  Help, please

  Hello

  The STOP 0xC000021A error occurs when Winlogon.exe or Csrss.exe. When the Windows NT kernel detects that or the other of these processes has stopped, it shuts down the system and triggers the STOP 0xC000021A error. This error may have several causes. Among them are the following:

  ·        Incompatible system files have been installed.

  ·        A Service Pack installation has failed.

  ·        A backup program used to restore a hard drive does not correctly restore files that may have been in use.

  ·        An incompatible third-party program has been installed.

  I suggest you to follow the steps mentioned in the article below and let us know your progress.

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer problem: error message - 01 document online

  Separated from this thread.

  Impressora em estado of erro. 01 documento da fila, sai'm nenhuma nao

  Hello

  Please contact Microsoft Community.

  This problem may occur if the driver is damaged or outdated.

  To better help you, could you please confirm a number of things like:

  1. What is the exact\complete error message you are getting?
  2. What is the brand and model of the printer?
  3. Have you made changes on the computer before this problem?
  4. What is your shared printer on your network home wireless?

  Please follow the steps below and check if that helps.

  Method 1: I suggest you to try all the steps from the link below and also to run the troubleshooter to step 2.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab3&V3H=winvistatab1&v4h=winxptab1

  Method 2: Uninstall the printer and reinstall it on your computer.

  Completely uninstall the printer drivers.

  1. Click Start
  2. Type in the Mmc console (press enter)
  3. Click file in the upper left corner of the screen
  4. Click Add/Remove Snap-in
  5. Scroll down to the print management in the ins available Snap , click Add and then click ok.
  6. Click Add the local server in the configuration print management window
  7. On the left side, expand print servers > Drivers -click the name of your computer, and if the list of installed drivers appear on the right side of the window.
  8. Right-click on the printer model and choose Remove driver package.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

• Windows 7 problem, I need help missing \Boot\BCD

  HII all,.

  I use Windows 7 is now a month when ago I installed... I use my laptop with no problems... But today, when I turned on, I got a black window with messeg...

  WINDOW BOOT MANAGER

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click Next
  3. click on repair your computer

  If you do not have the disk, contact your computer manufacturer or the system administrator for assistance

  File: \Boot\BCD

  Status: 0 xC0000001

  Info: An error occurred trying to read the boot configuration data.

  So that's what I get when I turn on my lap top

  So I try to put the DVD for windows 7 and install again, but I get this error again

  \Boot\Bcd is corrupt abd unreadable.please, run the Chkdsk utility.

  Average BCD Boot Configuration data

  Then I try my best to make all step of microsoft, I found, but does not not so far and I don't know how I can fix this problem can someone help me please?

  First of all, you have to work to Win 7. My problem was on a desktop, not a laptop. I also assume that you do not have many HD with dual-boot OS partitions. Just reconfigure your hardware & BIOS to the same thing when you installed Win 7 work. If it works, then perform the utility thing.

  I use VistaBootPro to the BCD but try checking on Easy BCD (its free). Start loading changed with Vista. I think that his startup loading posing problem. For a disk bootable for the restoration of files, I use Paragon Hd Mgr, but you can find some freebees with searches on the web.

  Chance.

• Problem with bbwp / HELP! :)

  Hey guys,.

  I'm new to the Blackberry Developer Zone and I am trying to convert my .zip file for the moment I watch the tutorial "develop using the BlackBerry® WebWorks SDK for BlackBerry tablets (1 of 4)»

  Now when I run bbwp it disconnects automatically within a period of a half second or more.

  The top line says: "invalid command line parameters [ERROR]".

  All other lines are just as usual.

  Anyone who knows what is my problem? Please help me!

  Thank you!

  I'm on Mac OS X btw

  EDIT: Got it to work! :$

  Listen to develop using the SDK software BlackBerry® WebWorks for BlackBerry tablets (1 of 4) for how.

  Yes, of course type the following line at your Terminal (Mac OS X). Windows is almost the same:

  / Users/username/bbwp/bbwp /Users/UserName/Coding/Playbook/Test/Test/Test.zip

  And then it's your output:

  [INFO]

  Parsing of the command line options

• EXT_framebuffer_object extension is not found error. Help please

  After that I took my computer to "sleep" mode I get the EXT_framebuffer_object extension is not found error. Help please!

  I have been unable to return to my other account, but anyway... My computer crashed and I had to get a new hard drive and now it doesn't have the problem more.

• Windows Media Player C00D11B1 get error can help u in detail

  Windows Media Player C00D11B1 get error can help u in detail

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. According to the description, uoi receive a Windows Media Player C00D11B1 error code. Please answer a few questions to refine the question.

  1. Once you get this error message code? What is the full error message?

  2. are you aware of changes to the computer before the show?

  3. is this point limited to any specific file or with all format?

  If you receive error C00D11B1 code, it can be a problem with the components of security of your digital media player to play the files on your computer.

  Follow the instructions in the article given below, because it can help you solve the problem

  Windows Media Player C00D11B1:

  http://Windows.Microsoft.com/en-us/Windows7/C00D11B1

  Hope this information helps. Provide more information about the issue so that we can help you.