SanDisk cruzer 16 GB - error adding files

Similar Questions

• SanDisk cruzer device error

  I opened the file of the sandisk cruzer, it has a message that says cannot work due to the I/o device error.

  I'm having the same problem. However, my cruzer will work on my computer with Windows XP.  I checked my drivers and ensured that they are all up to date.  The cruzer worked before my Windows Vista computer has been reformatted.  My solution that worked for me was to download the driver for the http://www.sandisk.com/sandisk-support/driver-download-wizardcruzer.  I hope this helps someone else.

  -Trill14n

• SanDisk Cruzer Edge files

  [I saw a thread for this already, so apologies if this is a repeat].

  I was recently bought a key of USB SanDisk Cruzer Edge, and to use it on the computer the first time, I saw a bunch of files already on it. I've included screenshots of them [,[x],[x][x]], and the question I'm really after a response to is - is - it safe to delete them?  

  I want especially to the idea of keeping a bunch of files that I won't always open on my memory stick, but I don't want to really not to take the risk and assume that they are unnecessary and remove them, only to find out I missed something big time. I have never experienced this with other brands of memory sticks, they were always completely empty at the time of purchase, but it's my first SanDisk one. My roommate has the same brand and she too had a bunch of files already on this subject at the time of purchase, but she has not taken the trouble to remove, so I'm not the wiser about the importance that they are

  "is it safe to delete them?

  Yes.

  If you want to be very careful copy on your drive hard and in 6 months or so decide to try copy them the.

• SanDisk Cruzer 4 GB Flash Drive deleted files

  I deleted some files on my SanDisk Cruzer 4 GB Flash Drive on a laptop computer that I used to have, now I use a different laptop and I was wondering if there is any way I can get the files I deleted back?

  Thank you!

  Sure.  Use an application of recovery such as PhotoRec, totally free; to download, use and to recover.  A lot of other 'free' support during the final phase.

  http://www.CGSecurity.org/wiki/PhotoRec_Step_By_Step

• "" Switch USB SanDisk Cruzer 4 GB not format error "Windows could not format.

  Original title: Switch USB SanDisk Cruzer 4 GB will not format...

  Whenever I try to format it, it says "Windows could not format.

  According to the ability that she reads, 64 MB.
  File system: FAT (default)
  Allocation unit size: 1024 bytes
  Oh and I have Windows Vista. I have another flash drive even space and everything and it did not happen to her. All reviews are useful.

  Hello

  Try to format it in Windows Disk Manager.

  See the following steps:

  a. open computer management by clicking the Start button, click on the Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in the Navigation pane, click Disk Management.

  c. right click on the partition or drive that you want to format and then click on format.

• Adding files of data on primary - errors pending

  Hi friends,

  We run 11.2.0.4.0 to DB primary and physical intelligence.

  Accidentally, one of our directors had created a new data file on the primary with StandbyFileManagement set to AUTO.

  Now repeat the process applied is stopped, and we found some erros like that on the alerts log

  ORA-27040: file create error, cannot create the file

  04002 - OSD: OSD 04002: could not open the file

  O / S error: (OS 21) the device is not ready

  #161 file added to the file of control as 'UNNAMED00161 '.

  Created originally as:

  ' D:\ORACLE\ORADATA\ORCL2010I\USERS20. DBF'

  Recovery failed to create the file as:

  ' D:\ORACLE\ORADATA\ORCL2000\USERS20. DBF'

  krsh.c 16:02:14.292 4320 2015-02-24

  MRP0: Background Media Recovery terminated with error 1274

  ORA-01274: cannot add datafile ' D:\ORACLE\ORADATA\ORCL2015\USERS20. DBF'

  krsh.c 16:02:14.292 4320 2015-02-24

  Managed Standby recovery not using real time applies

  Now, audit dba_data_files I really 01 more files on the primary. And I see errors on broker

  Error: ORA-16766: redo apply is stopped

  
  

  Advice how to fix this without compromising the total recovery?

  TKS a lot!

  Hello

  The problem is caused because it looks 'standby_file_management' database parameter is set to MANUAL, so a new added file on primary are not created in the standby mode.

  For more information about this parameter can be found:

  https://docs.Oracle.com/CD/E18283_01/server.112/e17110/initparams247.htm

  If you set it to AUTO on the main database, you will not encounter issues.

  ALTER system set standby_file_management = auto;

  How to solve current problems;

  * Pending, create a data file

  alter database create datafile  '/UNNAMED00161'.as''D:\ORACLE\ORADATA\ORCL2010I\USERS20.DBF'';

  * Start apply

  HTH,

  Pradeep

• Error adding media: Audio. M4A - when you import a generic error has occurred, I would like to add a music file in mpeg4 in first 12, thanks for the help

  I would like to add a music file in mpeg4 in first 12 and get:

  Error adding media: Audio. M4A - when importing a generic error has occurred, please help

  gjneudert

  First 12 items on what operating system? Have you updated 12 12.1 still using Help Menu/updates to date of an open project update. Please do.

  But your question immediately...

  Your music is on iTunes?  Please convert your file into WAV version using iTunes, and then import that WAV version in the Premiere Elements project using the first elements add Media/files and folders.

  If you need assistance with how to convert iTunes, please ask.

  iTunes: how to convert a song to a different file format - Apple Support

  We will follow your activity and results that your schedule permits.

  Thank you.

  RTA

• Create the database fails with error ORA-01505: Error adding log files

  Hi all
  
  hope someone can help out me, I'm creating a database by using a SQL script, the content of the script is:
  create the testora database
  the user sys identified by oracle
  the user identified by oracle's system
  LogFile Group 1 ('/ u01/app/oracle/oradata/testora/redo01a.log ',' / u02/app/oracle/oradata/testora/redo01b.log') blocksize 512 re-use, 100 m in size.
  Group 2 ('/ u01/app/oracle/oradata/testora/redo02a.log ',' / u02/app/oracle/oradata/testora/redo02b.log') blocksize 512 re-use, 100 m in size.
  Group 3 ('/ u01/app/oracle/oradata/testora/redo03a.log ',' / u02/app/oracle/oradata/testora/redo03b.log') blocksize 512 re-use, 100 m in size.
  maxLogFiles 5
  maxlogmembers 5
  MAXDATAFILES 100
  US7ASCII character set
  AL16UTF16 national character set
  Local extended management
  DataFile ' / u01/app/oracle/oradata/testora/system01.dbf' re-use of 400 m size
  SYSAUX datafile ' / u01/app/oracle/oradata/testora/sysaux01.dbf' re-use of 400 m size
  default tablespace users
  DataFile ' / u02/app/oracle/oradata/testora/users01.dbf' size 500 m reuse autoextend on maxsize unlimited
  default temporary tablespace tempts1
  tempfile ' / u01/app/oracle/oradata/testora/temp01.dbf' size 20 m reuse autoextend on maxsize 4g
  Undo tablespace undotbs1
  DataFile ' / u01/app/oracle/oradata/testora/undotbs01.dbf' size 200 m reuse autoextend on maxsize unlimited
  ;
  
  It fails in the creation of the database with the following result:
  
  SQL > @/home/oracle/Oracle_Scripts/testora_db_script.sql
  create the testora database
  *
  ERROR on line 1:
  ORA-01092: ORACLE instance is complete. Disconnection forced
  ORA-01501: CREATE DATABASE failed
  ORA-01505: Error adding log files
  ORA-01184: logfile group 1 already exists
  Process ID: 3486
  ID of the session: 1 serial number: 3

  This is the documentation: http://docs.oracle.com/cd/E11882_01/server.112/e26088/statements_5004.htm#i2142335
  >
  If only the DB_RECOVERY_FILE_DEST initialization parameter is specified, Oracle database then creates a log file member to this place.

• SanDisk Cruzer power 32 GB has boring secureaccess v2

  Hi all

  I have 5 Sandisk Cruzer 32 GB Force, I will use them to deploy .bin image on my company PC.

  I use imageUSB by the pass mark, to create an image of USB .bin file.

  The problem is, after the process is done and finished checking, no files have been written to USB, what remains is secureaccess v2 file and the exe file.

  What's weird is, the first purchase, the first model of the same USB, works, no problem. I was able to deploy the image to the PC without problem after the creation of the same file .bin for sync USB.

  The rest, than 4 USB ports won't do the same thing, I feel there is some friendly protection I have is in the USB port. Because the v2 secureaccess is keep returning.

  However, I was able to create a Windows 7 bootable inside installation program, no problem. I used Rufus for this.

  Y at - it that someone out there, ever encountered this? I need help.

  Thanks in advance.

  After the USB imaging, secureaccess file and folder are returned.

  I had read that as being a part of the .bin file that you write on the disc.

• Strange! SanDisk Cruzer blade 16 GB

  Hello.

  I buy a sandisk cruzer blade 16 GB a week ago. He had worked flawlessly for 2 days, but recently, I copied files of windows 7 64 bit and connect this player to a computer with windows xp. It shows usb not detected and has malfunctioned and blah blah.

  I thought that there is a problem in this system, but I was shocked to see that now it is is even not detected by my pc either.

  After so many tests, I tried to connect it with my keyboard usb port and it has been detected, but that the port is not 2.0 because windows ask me to connect it to a hi-speed 2.0 port.   I thought that the problem has been resolved and I format the USB and then plug it back to my pc. but same problem again and it shows device attached has malfunctioned. but when I connect with the usb port on the keyboard it works very well. However, the usb keyboard that I tied this USB is connected with my usb port on the computer.

  Similarly, I connect this usb with some old marks of Dell systems model Gx optiplex 260 and it has been detected it too much and at the same time not detected by any other pc that stood out...

  Why is this usb detected now only by the usb ports on my keyboard and not by my pc as it was earlier detected by my pc.

  I tried several solution but nothing works even with kaspersky scanner last definition.

  Is there a solution to this problem. I want to connect this usb to my pc 2.0 ports.

  I have intel DH55TC Board with Intel I3 processor of first generation.

  First of all thank you.

  In fact, the usb is defective and I had replaced.

  and Ed if it is the question of power, then how can it be connected to the usb port on my keyboard that eventually connected to the same usb port of the usb to my pc and alternated readers like Kingston and Sony are working well in this port.

  Any ways thanks to you guys for the suggestion.

• Muse CC 2015 update error: «some files on the server may be missing or incorrect...» »

  After an update to the Muse CC 2015, I get this error: "some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. "If the problem persists please contact the author of the Web site." I went as far as the incorporation of images and still get this error. I have not edited my CSS or Scripts. I have added Google Analytics to index.html

  The site worked fine before the update. I have no errors or missing files in my links or layers.

  I use Mac OS 10.10.3 with Chrome, Safari and Firefox. I watched it via a laptop, iPhone and the desktop, I get the error on all 3 browsers via the bureau on Safari via iPhone, etc.

  I can't find anything current about this problem in Muse CC 2015. Help, please. Thank you!

  Please see "some files on the server may be missing or incorrect" Warning Message>.

  If this does not help solve you the problem, please post the URL of your site and let us know how the site is transferred (i.e. with the help of publish, using the file > Upload FTP host, or by using the file > export to HTML and other FTP client software)?

• Error opening file on all native projects SpeedGrade 2014/2015

  OK, it's frustrating and infuriating.

  I had to have my computer re-formatted, installed Win7 Ultimate and tried to get to the place where I 'was '. But at the present time, if I'm in 2014 Sg (build 8.0x141) or the new generation of 2015, I can't get any format/codec images to display a thumbnail in the browser "Desktop" of Sg and nothing added to the mounting area section just says "error opening file".

  Both will be run between a link Direct process.

  What the...! ?

  Neil

  I eliminated the ability of my media Speedgrade browser to show images trying to simulate (without entering the stage to add anything to the timeline)

  my media browser has been set to "sequences in the selected folder" and even if everything was showing according to the normal and me thinking as "sequences in the selected folder" was not what I had and going through the set up/view/format by default/coils/color space default - my media browser deleted

  Then, I chose "sequences of selected folder + subtree" and I found the ability to see my sequences of dng

  now I will go back to "sequences in the selected folder" and the files reappear

  I see not an MP4 Player until I select "all files", but I can put it on a timeline without error

• Folio Builder content generation error: error processing files

  Using the latest version of PC of Indesign CC I get this error.

  The indesign document is a document of multistate. At some point after you add States, I can't update the document in foliobuilder more and get (translated from the Dutch right Synax may be different):

  Creation of Article

  Article

  Content generation error

  [File processing error]

  I tried things like:

  -with the help of another userID folio/Adobe

  -put filed of LAN 2 (with the reissue of links)

  -removal of several States (at one point, the issue is resolved, but when I add new States the problem is reintroduced)

  -the document splitting (2 x 10 States does'nt fix this)

  -added several States (making copies and do not change content yet) it works. As soon as I start changing the content this error comes back.

  Please suggestions!

  It took me a lot of time, but I think I finally found the answer.

  In 'Names of State', spaces are allowed, but if your total of spaces in the names of all the 'State' in a folio is about more than 45 you get this problem.

  My solution is not to use spaces in "names of State." I don't have problems with & - or.

• AIP-18510: Error adding items from configuration... for business processes.

  Hello
  
  We encounter this error a few days after the application of the latest patch MLR.
  
  None of our agreements can be deployed, even those who have not changed in any way, after that the fix has been applied.
  
  This is part of our ui.log:
  
  2009.02.02 to 08:49:10:409: AJPRequestHandler-ApplicationServerThread-13: UI - composed message (ERROR)
  2009.02.02 to 08:49:10:409: AJPRequestHandler-ApplicationServerThread-13: UI - composed message (ERROR)
  2009.02.02 to 08:49:10:409: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) made Page::pages/deployment/deploy_progress
  2009.02.02 to 08:49:10:421: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) in getVersionOnly()
  2009.02.02 to 08:49:10:965: Thread-24: - Error (ERROR) - IP: AIP-18510: Error adding CONFIG configuration for business process cm_all_agreements objects
  at oracle.tip.configuration.B2BConfigurationBuilder.run(B2BConfigurationBuilder.java:452)
  at java.lang.Thread.run(Thread.java:534)
  
  2009.02.02 to 08:49:20:651: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) found no Validation errors
  2009.02.02 to 08:49:20:651: AJPRequestHandler-ApplicationServerThread-13: UI - composed message (ERROR)
  2009.02.02 to 08:49:20:651: AJPRequestHandler-ApplicationServerThread-13: UI - composed message (ERROR)
  2009.02.02 to 08:49:20:662: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) made Page::pages/deployment/deploy_error
  2009.02.02 to 08:49:20:673: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) in getVersionOnly()
  2009.02.02 to 08:49:27:961: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) made Page::pages/deployment/config_list
  2009.02.02 to 08:49:27:971: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) execution Query::SELECT C.ID DISTINCT, C.name, C.LifeCycleState, C.CLASSTYPE, CA.aud_modified OF TIP_Configuration_t C, TIP_Configuration_t_AUD CA WHERE C.ID = CA.ID AND C.LifeCycleState IN ('Active', "Validated", "Suspension", "Suspended") AND CA.aud_modified in (SELECT MAX (aud_modified) FROM TIP_Configuration_t_AUD WHERE ID = C.ID GROUP BY ID) ORDER BY CA.aud_modified DESC
  2009.02.02 to 08:49:27:978: AJPRequestHandler-ApplicationServerThread-13: UI - (ERROR) in getVersionOnly()
  
  Please help as this makes our unnecessary server.
  
  Best regards
  Kamil

  Hi Kelly,

  I assume you mean to meet these problems post MLR # 7 patch.

  Here are some of the things ypu might start with:

  1. check your inventory of LS to see if your patch has been applied successfully
  2. ensure that all the post installation steps are completed (in the readme file)
  3. you may restore this patch and check if you still get the same error.
  4. after the cancellation, if your config works fine, the new patch rerapply and observe the effects.

  Thank you best regards &,.
  Suhas.

• Update iTunes to 12.5.1 - "error getting file security: C:\ProgramData\Apple Computer\iTunes\ GetLastError: 5.

  Having now this error pop up everytime I go to install the latest version of iTunes. I tried to do an uninstall on iTunes and received the same error message.

  I'll post here the error in the reference summary:

  "Error getting file security: C:\ProgramData\Apple Computer\iTunes\ GetLastError: 5.

  I have also tried to do a repair on iTunes as well and have received this error message:

  «An error occurred while attempting to create the directory: C:\ProgramData\Apple Computer\iTunes\SC Info»

  I am currently under the latest version of Windows 10 and the version of iTunes, I have installed right now are 12.4.2.4.

  Right now, I'm still able to access iTunes for my music and the storefront. I'm not able to upgrade to the latest version.

  same here, but I have iTunes on my iMac that I just received 16 January... will update not to 12.5.1... stuck on 12.4.3 since IOS update on iPhones and iPads... but I can still use iTunes... go figure...