Strange! SanDisk Cruzer blade 16 GB

Similar Questions

• Can I use a sandisk Cruzer Blade 4 GB as readyboost for windows XP Home Edition PC?

  Can I use a sandisk Cruzer Blade 4 GB as readyboost for windows XP Home Edition PC?

  You can do this for Vista (and), but not for Windows XP.

  You want to explore other ways to improve your performance? If so, you are in the right forum. :-)

• SanDisk Cruzer Blade USB key can not detect properly by Win 7 64 bit

  Hi all:

  I have this problem on and outside.

  This time, it's ok and next time can be bad that the USB device is unable to detect Win 7 64 bit. It's OK to Win Xp all the time.

  I have referred to as the previous posts for this problem and remove the VID_0781 by REG_EDIT, also try to uninstall the device from the hardware in the computer and re - install the device. I also did the replacement of usbstor.inf in c:\windows\inf to another subfolder.

  from c:\windows\.

  The result is intermittent it's Ok this time and not okay at other times. It's really wasting a lot of time to try this or that, and the result is intermittent.

  Can anyone or Sandisk people leave a good and permanent solution to this problem?

  Thank you and best regards,

  tangsuan

  Hi all:

  I want to update this solution for this problem of Sandisk support.

  This solution may be different from one case to another, but if you have installed Samsung KIES in PC, then most likely it is the solution.

  If you kill the KiesTrayAgent.exe, the Sandisk can be detected smoothly whenever you plug it into my laptop.

  Thanks and respect of the best.

• U3 Cruzer Slice and Cruzer Blade available? (SDCZ50 / SDCZ37)

  Hello

  First of all, sorry for my English, I m still to learn ;-)

  We are an official distributor of Sandisk in Spain, we´ve had a few questions about the new units cruzer, slice and the blade.

  Provided that we have understood Sandisk removed the all readers Oct-2009 usb U3 partition and remained as an optional choice, the question is:

  Can we install the U3 technology through the Sandisk U3 installer in any unit of Sandisk Cruzer? Or is there some cruzer models who do not accept U3? We got some customers who bought the Cruzer Blade and reported that they couldn t install the U3 app.

  Thanks in advance for your answer!

  MemoryVal

  Older devices which were manufactured before 10/09 will always support U3 and the user can install it using the U3 Installer. devices manufactured after that 10/09 do not support U3 and it cannot be installed.

• Oh noes! My SanDisk Cruzer has stopped working!

  When I plug it, nothing happens. I tried my mother's cell phone, my laptop (on Linux AND windows) and a computer at school. The light does not illuminate and the computer behaves as if nothing is fixed. "It's an 8 GB drive that I got from BestBuy.com for $ 15 years black Friday sale, so its about 8 ~ 9 months old." What to do now?

  Oh, and under windows, in Device Manager, it does not list a device malfunction series universal.

  ([A plus = edit]) This: http://www.bestbuy.com/site/olspage.jsp?skuId=8281352&st=sandisk+cruzer+8+gb&lp=2&type=product&cp=1&id=1171672069828 but 8 GB instead of 2. Its the old style one, not the type newish.

  Try here:

  http://communities.SanDisk.com/SanDisk/

• SanDisk Cruzer power 32 GB USB recognized as a hard drive instead of the removable storage driver.

  Hi, my sandisk Cruzer power 32 GB USB key is recognized as hard disk, which appears in the section hard drives instead of the section of removable storage. I would like to know how to solve this problem. I want to create bootable USB driver.pls. ~

  I use the 32-bit Windows 7.

  There is no solution, it is what it is.  However we should not prevent you to make bootable.  Search here and on Google for RMPrepUSB.  It is a utility that can make the bootable disc.

• SanDisk cruzer 16 GB - error adding files

  Hello

  I recently bought Adobe C6 and opted for download, rather than discs.  Now that I installed it on my computer, I wanted a return to the top on a Flash drive, just in case we need on the road.

  I picked up a sandisk cruzer 16 GB disk because the total size of the file for the software is 11.1 GB.  I started to copy the files to the flash drive, but received an error that the file is too large.  Okay, so I went back to the USB and formatted to remove all the bloatware that was originally about it.  Judge again.  Get the same error "file too large". I can get 11 of the 12 files on the flash - file player that does not load on it the biggest one of 4.5 GB.

  I deleted all the files on the flash, formatted, once again added the file problem first.  I always get the error message.

  Any thoughts on how to make this work?  Screenshot below.

  Thank you.

  

  Flash drives are formatted in FAT32 which imposes a 4 GB file size limit. You will need to re - format drive to NTFS in order to put a file greater than 4 GB on it.

• SanDisk Cruzer power 32 GB has boring secureaccess v2

  Hi all

  I have 5 Sandisk Cruzer 32 GB Force, I will use them to deploy .bin image on my company PC.

  I use imageUSB by the pass mark, to create an image of USB .bin file.

  The problem is, after the process is done and finished checking, no files have been written to USB, what remains is secureaccess v2 file and the exe file.

  What's weird is, the first purchase, the first model of the same USB, works, no problem. I was able to deploy the image to the PC without problem after the creation of the same file .bin for sync USB.

  The rest, than 4 USB ports won't do the same thing, I feel there is some friendly protection I have is in the USB port. Because the v2 secureaccess is keep returning.

  However, I was able to create a Windows 7 bootable inside installation program, no problem. I used Rufus for this.

  Y at - it that someone out there, ever encountered this? I need help.

  Thanks in advance.

  After the USB imaging, secureaccess file and folder are returned.

  I had read that as being a part of the .bin file that you write on the disc.

• Can no longer access my Scandisk Cruzer Blade USB 4GByte

  My Dell PC (XP SP3 operating system) still recognizes my Scandisk Cruzer Blade USB 4GByte, but now you invite "the disk in drive G is not formatted. Want to format it now?

  I suspect that the drive is full, as I planned to remove a few files for some time - but not got around him. The last time it worked, I copied a file from software on the drive for a colleague. He took the blade, copied the file and returned it to me.

  Is it possible that I can "secure format" the drive without erasing the data on it or another method of recovery/restoration of the blade.

  Tried to win 7 & XP - no joy. Colleague (System Administrator) used a recovery software but can't find anything.

  Technical support of Scandisk which provided a link to the software recovery LC company went through. Recovery software demo download, but once again failed to find all the files. Talked to their technical support which provided another link for some more advanced software. Once again no file is found. Talked with them and now confirmed her drive is clean and empty - somehow?

  Their Filerecover software checks the data in hexadecimal block - all zeros.

• the cruzer blade replacement

  My cruzer blade USB does not work but its still in the warranty period. If the company will replace if requested.

  I doubt it. It's not their fault, it's yours.

• timing issue with cruzer blade SCDZ50 - 008G: cannot move all the files from the PC to the USB

  I accidentally deleted this file synchronization that was in the main folder of the USB. now I can't move all the files from the computer to the cruzer blade. I can't find where to download it online. Help, please!

  Too bad. found this

• SanDisk Cruzer Edge files

  [I saw a thread for this already, so apologies if this is a repeat].

  I was recently bought a key of USB SanDisk Cruzer Edge, and to use it on the computer the first time, I saw a bunch of files already on it. I've included screenshots of them [,[x],[x][x]], and the question I'm really after a response to is - is - it safe to delete them?  

  I want especially to the idea of keeping a bunch of files that I won't always open on my memory stick, but I don't want to really not to take the risk and assume that they are unnecessary and remove them, only to find out I missed something big time. I have never experienced this with other brands of memory sticks, they were always completely empty at the time of purchase, but it's my first SanDisk one. My roommate has the same brand and she too had a bunch of files already on this subject at the time of purchase, but she has not taken the trouble to remove, so I'm not the wiser about the importance that they are

  "is it safe to delete them?

  Yes.

  If you want to be very careful copy on your drive hard and in 6 months or so decide to try copy them the.

• SanDisk Cruzer 4 GB Flash Drive deleted files

  I deleted some files on my SanDisk Cruzer 4 GB Flash Drive on a laptop computer that I used to have, now I use a different laptop and I was wondering if there is any way I can get the files I deleted back?

  Thank you!

  Sure.  Use an application of recovery such as PhotoRec, totally free; to download, use and to recover.  A lot of other 'free' support during the final phase.

  http://www.CGSecurity.org/wiki/PhotoRec_Step_By_Step

• "" Switch USB SanDisk Cruzer 4 GB not format error "Windows could not format.

  Original title: Switch USB SanDisk Cruzer 4 GB will not format...

  Whenever I try to format it, it says "Windows could not format.

  According to the ability that she reads, 64 MB.
  File system: FAT (default)
  Allocation unit size: 1024 bytes
  Oh and I have Windows Vista. I have another flash drive even space and everything and it did not happen to her. All reviews are useful.

  Hello

  Try to format it in Windows Disk Manager.

  See the following steps:

  a. open computer management by clicking the Start button, click on the Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in the Navigation pane, click Disk Management.

  c. right click on the partition or drive that you want to format and then click on format.

• How to make the sandisk cruzer slice 16 GB run

  I can not begin to use the new sandisk Cruzer Slice because it does not find its driver

  Please take a look at:

  http://kb.sandisk.com/app/answers/detail/a_id/139/kw/flash%20drive%20cannot%20find%20driver .