SanDisk Cruzer Edge files

Similar Questions

• SanDisk cruzer edge 1.9 impossible to format

  I have 8 gb sandisk cruzer edge 1.9... .it show readonly... .in disk management... .and only show open, explore and propertie option, when I right click on the main partition

  Please please help me...

  Check for a physical switch on the flash drive that can apply it
  setting. Your next option would be to contact the manufacturer support.
   
   

• SanDisk cruzer 16 GB - error adding files

  Hello

  I recently bought Adobe C6 and opted for download, rather than discs.  Now that I installed it on my computer, I wanted a return to the top on a Flash drive, just in case we need on the road.

  I picked up a sandisk cruzer 16 GB disk because the total size of the file for the software is 11.1 GB.  I started to copy the files to the flash drive, but received an error that the file is too large.  Okay, so I went back to the USB and formatted to remove all the bloatware that was originally about it.  Judge again.  Get the same error "file too large". I can get 11 of the 12 files on the flash - file player that does not load on it the biggest one of 4.5 GB.

  I deleted all the files on the flash, formatted, once again added the file problem first.  I always get the error message.

  Any thoughts on how to make this work?  Screenshot below.

  Thank you.

  

  Flash drives are formatted in FAT32 which imposes a 4 GB file size limit. You will need to re - format drive to NTFS in order to put a file greater than 4 GB on it.

• SanDisk Cruzer 4 GB Flash Drive deleted files

  I deleted some files on my SanDisk Cruzer 4 GB Flash Drive on a laptop computer that I used to have, now I use a different laptop and I was wondering if there is any way I can get the files I deleted back?

  Thank you!

  Sure.  Use an application of recovery such as PhotoRec, totally free; to download, use and to recover.  A lot of other 'free' support during the final phase.

  http://www.CGSecurity.org/wiki/PhotoRec_Step_By_Step

• SecureAccess for Cruzer Edge

  I recently bought a Cruzer Edge 16 GB of Office Depot.

  This was done after that I read in the characteristics of the product on the SanDisk website that it comes with the SanDisk SecureAccess software to protect the contents of the Flash Player.

  When you try to download the software from the SanDisk site it gave me the following error message:

  "Please run SanDisk SecureAccess from an external device, SanDisk" but on the drive flash is only "RunClubSanDisk".

  Help, please

  you will need to download the app secureaccess since the post stickied at the top of this map. the download is a zip file. You must copy this file zip on the edge of the cruzer. Once the zip file on the cruzer edge extreact the zip on the same drive. then run the .exe from the cruzer edge.

• SanDisk Cruzer power 32 GB has boring secureaccess v2

  Hi all

  I have 5 Sandisk Cruzer 32 GB Force, I will use them to deploy .bin image on my company PC.

  I use imageUSB by the pass mark, to create an image of USB .bin file.

  The problem is, after the process is done and finished checking, no files have been written to USB, what remains is secureaccess v2 file and the exe file.

  What's weird is, the first purchase, the first model of the same USB, works, no problem. I was able to deploy the image to the PC without problem after the creation of the same file .bin for sync USB.

  The rest, than 4 USB ports won't do the same thing, I feel there is some friendly protection I have is in the USB port. Because the v2 secureaccess is keep returning.

  However, I was able to create a Windows 7 bootable inside installation program, no problem. I used Rufus for this.

  Y at - it that someone out there, ever encountered this? I need help.

  Thanks in advance.

  After the USB imaging, secureaccess file and folder are returned.

  I had read that as being a part of the .bin file that you write on the disc.

• Strange! SanDisk Cruzer blade 16 GB

  Hello.

  I buy a sandisk cruzer blade 16 GB a week ago. He had worked flawlessly for 2 days, but recently, I copied files of windows 7 64 bit and connect this player to a computer with windows xp. It shows usb not detected and has malfunctioned and blah blah.

  I thought that there is a problem in this system, but I was shocked to see that now it is is even not detected by my pc either.

  After so many tests, I tried to connect it with my keyboard usb port and it has been detected, but that the port is not 2.0 because windows ask me to connect it to a hi-speed 2.0 port.   I thought that the problem has been resolved and I format the USB and then plug it back to my pc. but same problem again and it shows device attached has malfunctioned. but when I connect with the usb port on the keyboard it works very well. However, the usb keyboard that I tied this USB is connected with my usb port on the computer.

  Similarly, I connect this usb with some old marks of Dell systems model Gx optiplex 260 and it has been detected it too much and at the same time not detected by any other pc that stood out...

  Why is this usb detected now only by the usb ports on my keyboard and not by my pc as it was earlier detected by my pc.

  I tried several solution but nothing works even with kaspersky scanner last definition.

  Is there a solution to this problem. I want to connect this usb to my pc 2.0 ports.

  I have intel DH55TC Board with Intel I3 processor of first generation.

  First of all thank you.

  In fact, the usb is defective and I had replaced.

  and Ed if it is the question of power, then how can it be connected to the usb port on my keyboard that eventually connected to the same usb port of the usb to my pc and alternated readers like Kingston and Sony are working well in this port.

  Any ways thanks to you guys for the suggestion.

• "" Switch USB SanDisk Cruzer 4 GB not format error "Windows could not format.

  Original title: Switch USB SanDisk Cruzer 4 GB will not format...

  Whenever I try to format it, it says "Windows could not format.

  According to the ability that she reads, 64 MB.
  File system: FAT (default)
  Allocation unit size: 1024 bytes
  Oh and I have Windows Vista. I have another flash drive even space and everything and it did not happen to her. All reviews are useful.

  Hello

  Try to format it in Windows Disk Manager.

  See the following steps:

  a. open computer management by clicking the Start button, click on the Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in the Navigation pane, click Disk Management.

  c. right click on the partition or drive that you want to format and then click on format.

• SanDisk cruzer device error

  I opened the file of the sandisk cruzer, it has a message that says cannot work due to the I/o device error.

  I'm having the same problem. However, my cruzer will work on my computer with Windows XP.  I checked my drivers and ensured that they are all up to date.  The cruzer worked before my Windows Vista computer has been reformatted.  My solution that worked for me was to download the driver for the http://www.sandisk.com/sandisk-support/driver-download-wizardcruzer.  I hope this helps someone else.

  -Trill14n

• Can I use a sandisk Cruzer Blade 4 GB as readyboost for windows XP Home Edition PC?

  Can I use a sandisk Cruzer Blade 4 GB as readyboost for windows XP Home Edition PC?

  You can do this for Vista (and), but not for Windows XP.

  You want to explore other ways to improve your performance? If so, you are in the right forum. :-)

• Oh noes! My SanDisk Cruzer has stopped working!

  When I plug it, nothing happens. I tried my mother's cell phone, my laptop (on Linux AND windows) and a computer at school. The light does not illuminate and the computer behaves as if nothing is fixed. "It's an 8 GB drive that I got from BestBuy.com for $ 15 years black Friday sale, so its about 8 ~ 9 months old." What to do now?

  Oh, and under windows, in Device Manager, it does not list a device malfunction series universal.

  ([A plus = edit]) This: http://www.bestbuy.com/site/olspage.jsp?skuId=8281352&st=sandisk+cruzer+8+gb&lp=2&type=product&cp=1&id=1171672069828 but 8 GB instead of 2. Its the old style one, not the type newish.

  Try here:

  http://communities.SanDisk.com/SanDisk/

• SanDisk Cruzer power 32 GB USB recognized as a hard drive instead of the removable storage driver.

  Hi, my sandisk Cruzer power 32 GB USB key is recognized as hard disk, which appears in the section hard drives instead of the section of removable storage. I would like to know how to solve this problem. I want to create bootable USB driver.pls. ~

  I use the 32-bit Windows 7.

  There is no solution, it is what it is.  However we should not prevent you to make bootable.  Search here and on Google for RMPrepUSB.  It is a utility that can make the bootable disc.

• I bought a 32 GB USB CRUZER EDGE today. I can't use it (RAW problem)

  I bought a 32 GB USB CRUZER EDGE today. I can't use it.

  USB is in RAW format and I can't format it.

  How do I do for change in NTFS or FAT32?

  Bring (or send) back. It must be formatted in FAT32.

  But before you do, just check that the problem is with the drive itself and not your computer by trying it in another USB port and another computer.

• How to make the sandisk cruzer slice 16 GB run

  I can not begin to use the new sandisk Cruzer Slice because it does not find its driver

  Please take a look at:

  http://kb.sandisk.com/app/answers/detail/a_id/139/kw/flash%20drive%20cannot%20find%20driver .

• SanDisk cruzer flash drive glide does not work on my rt of surface, both are new

  SanDisk cruzer flash drive glide does not work on my rt of surface, both are new. Could not format it rises

  Hi Victor,

  Welcome to the Microsoft Community and thanks for posting the question.
   
  
  According to the description, the Flash Player does not work.
   
  This can happen because incorrect settings in the computer.
  Click on the link below and see if it helps.
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly
   
  Answer to us if you are having problems with the Flash Player or any Windows problem, and we would be happy to help you.
   
  Good day!
   
   
  Hope this information helps.