SanDisk Cruzer power 32 GB USB recognized as a hard drive instead of the removable storage driver.

Similar Questions

• Toshiba Stor.E Alu 2 s 1 TB HARD drive recognized as a HARD drive fixed

  Problem:
  New external "TOSHIBA Stor.E 2 s Alu 1 Tb PA4265E-1HJ0" in my Windows 7 x 64 is recognized as a hard drive fixed. Hereby, it is impossible to make his withdrawal safely.

  Issue.
  How to create this disk as a removable media device?

  Thank you

  Please see this FAQ from Toshiba:

  + Remove the hidden partition of VCD (Virtual CD) on the STORE. E ALU 2 s and STORE. External hard drives STEEL O +.
  http://APS2.toshiba-tro.de/KB0/SPD4603LR0000R01.htm

  Your comments would be appreciated

• Iso file of windows xp can directly be installed USB on a formatted hard drive?

  Iso file of windows xp can directly be installed USB on a formatted hard drive?

  Not directly.

  There is a SMALL chance that if your hardware supports it (unfortunately never say you anything on your PC or BIOS), you can boot from a USB stick or an optical drive and install Windows XP like this.
  But it is unlikely.
  In addition, tell us what you mean by 'windows xp iso file. This is very vague, and we do not know what you are talking about.
  Finally, if you want to ask questions here, really read the answers and recognize them in some way. Here is a link to your other thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/which-software-should-i-use-to-burn-Windows-XP-ISO/ffd9ccb8-0248-4e1f-afd3-6ce14802348a

• Fantom II of GreenDrive USB 1 TB external hard drive eSATA drives does not appear

  Player installs but does not appear in the player list and cannot be accessed.

  Hello

  1. were you able to connect the front USB hard drive?

  2 have you made any changes to the computer before the show?

  You can try to connect any other USB device to the computer and check if you are able to access it or not.

  You can also try to connect this Fantom Drives Green Drive II ESATA USB 1 TB external hard drive to another Windows XP computer and check if the problem is with the drive hard or computer.

  You can run the fix it or follow the manual for troubleshooting steps described in the link below to fix the problem.

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

  http://support.Microsoft.com/kb/314634

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• Pilot Technologies simple SimpleDrive Turbo USB 2.0 external hard drive

  Simple technologies SimpleDrive 320 Turbo USB 2.0 External Hard Drive

  I use Windows 7 now there something wrong.  Where can I find a FREE driver or updated to write about the one currently in use.

  Thanks to you all.   :))

  External hard drives all use the Microsoft drivers built to access.

  Please report the full problem you are experiencing.

• SanDisk Cruzer power 32 GB has boring secureaccess v2

  Hi all

  I have 5 Sandisk Cruzer 32 GB Force, I will use them to deploy .bin image on my company PC.

  I use imageUSB by the pass mark, to create an image of USB .bin file.

  The problem is, after the process is done and finished checking, no files have been written to USB, what remains is secureaccess v2 file and the exe file.

  What's weird is, the first purchase, the first model of the same USB, works, no problem. I was able to deploy the image to the PC without problem after the creation of the same file .bin for sync USB.

  The rest, than 4 USB ports won't do the same thing, I feel there is some friendly protection I have is in the USB port. Because the v2 secureaccess is keep returning.

  However, I was able to create a Windows 7 bootable inside installation program, no problem. I used Rufus for this.

  Y at - it that someone out there, ever encountered this? I need help.

  Thanks in advance.

  After the USB imaging, secureaccess file and folder are returned.

  I had read that as being a part of the .bin file that you write on the disc.

• PC stopped recognizing 3.5 hard drive external Toshiba

  Hi all

  I have a 3.5/250 GB Toshiba hard drive external. I use Windows XP as my operating system and for some reason, my PC stopped recognizing saying 'USB not recognized '.
  It is supposed to be taken & play and I'm sure that I didn't have a driver, when I installed it.
  If anyone can help or has any suggestions, I would be grateful.

  Thank you

  Malc

  Hallo Malc

  It is possible that you have removed the external device without using the option remove the device safely. Restart the machine and try again.

  Otherwise, you can remove all ports USB device manager and start option to add material on the list. After detection and installation it should work again.

• Cannot start on USB 3.0 external hard drive?

  I have created a startup disk, so much for my new Mac Pro 2013 and finally to put in my old Mac Pro silver tour 2012.

  I did a clean install of El Capitan on an external HD. Nothing else on the subject. The Western Digital 2 TB Green is in a pregnant Sabre, connected to a USB 3.0 hub, which is connected to the new Mac Pro 2013. I tried a couple of different ways to select external HD and boot to it, but I keep priming in Macintosh HD SSD installed in the Mac Pro (2013).

  I was wondering if the problem is the hub. Should the HD be connected directly to the Mac Pro?

  Should the HD be connected directly to the Mac Pro?

  Yes, exactly.

  The reason is that a USB Hub arrives too late to be seen at boot time, so the drive is not available to start from.

  It is also a problem for the use of 'hang up the keys' at startup - beyond the hub keyboard is not visible at startup.

• My USB 2.0 does not detect the USB keys or external hard drives

  I attach my USB mouse and it works fine but I can't detect my external hard drive or memory key USB. Why?

  Try plugging a storage drive (external hard drive or USB key) and go to:
  Control Panel-> administration-> computer management tools
  Under, click on storage disk management
  The storage drive appears in the list at the bottom right? If so, can you do a right click on it and select change drive letter and paths, and assign a drive letter.
  It will now appear in desktop and when you plug it in.

  If the drive does not appear in disk management, can you just tell me if it's a USB port specific, that you are having problems or if readers do not appear in one of your USB slots and also if you tried the discs in another system to make sure that they highlighted it?

• FireWire devices are most recognized. External hard drive and the camcorder will not connect.

  My computer no longer recognizes the firewire devices that I connect to it.  The Device Manager shows the driver 1394 work very well.  I even deleted and reinstalled Windows XP.  My external hard drive so my camcorder are more recognized when I plug them cold or hot plug.  Two of them have worked very well for more than 4 years and now for some unknown reason, that they stopped just recognized.

  How can I get Windows XP to see again them?   I've tried everything.

  Hello Stevec5375.

  See the link below.  There is a fix for those running XP with multiple Firewire devices, thus causing a problem.

  http://support.Microsoft.com/kb/830987/en-us

  Please let us know if it did or did not help to solve your problem.

  See you soon

• Can't restore Vista backup - backup zip files are not recognized, on external hard drive

  I backed up my files with Windows Backup, which divide into 200 MB zip files.  Now I am unable to restore the backup because it is not recognized when I try to use the backup to restore.  It's on an external hard drive and Windows for some reason any do not recognize.  I tried to move it to the desktop, but it is not always recognized as a backup.  I tried to use the advanced restore, windows recovery, and it won't work.  Must the file with the zip files be in a specific location on the disk so that it can be recognized, or should it be named something specific?  Please help me, I really need these files.

  Hello

  Refer to this link and try the steps proposed by Divya.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/00aea6aa-5aac-4647-BA6B-24eac423da66

  It will be useful.

• New external USB 500 GB Portable Hard Drive appearing is not in Windows Vista

  I connected a new 500G portable hard drive to a front USB port on my HP PC (with an AMD Phenom X 4 image processor), under Windows Vista Home Premium. Windows presented a pop saying that the driver has been installed, then he said: USB device installed. The software of the device has been installed successfully and is ready for use.

  However when I looked for the drive in Windows Explorer it wasn't there. I read in this forum, and using the information that I realized that I accessed the computer on my PC management - up it only shows C: drive and D: drive image factory, but below that, when disk 0 is assigned to the C: and D: drives it shows disk 1, unknown, uninitialized. Assuming that it is the car in question, I tried to initialize the disk, but then the error FUNCTION INCORRECTE.

  I don't know what to do at this point. If the player has not been assigned a letter, there seems to be no way to transfer or partition.

  A new drive must be formatted. That is why it is sjowing up as disc 1, unknown, uninitialized.

• Connection USB Hub with Multiple Hard Drives Wi - Fi router

  I was shopping for a router wireless n. I liked this one because of the Gigabit and the usb socket: http://www.linksysbycisco.com/CA/en/products/WRT610N

  I was wondering if I could plug more than 1 hard drive into this USB port using a usb hub. I would like to use the router as a kind of SIN. I have a few drives hard usb and I would like to access it without having to be on all computers.

  Don't you think that the firmware on the router supports more than 1 hard drive? Has anyone tried this before? Can someone test it for me if you have the right hardware?

  Thanks for the help

  No, the Linksys WRT610N, you can use a single USB and hard drive... However on NAS200, you can use two USB and two hard drives.

• Application of USB 3.0 external hard drive to be reformatted

  I have been using an external 1 TB raid array on my old computer using USB 2.0.  I just bought a new computer with USB 3.0 ports, but, when I plug in my raid array in either of the USB 3.0 two ports, Windows 7 64-bit indicates that the disk must be reformatted.  Fitness is not an option because I have 800 MB of music top and nothing of that size that I can come back up, but clicking on 'Cancel', causes the drive letter to disappear from the list of Windows Explorer.  However, every time that I plug it into one of the USB 2.0 ports of the new computer it works fine - it seems that there is nothing wrong with the device itself.  I checked and it is USB 3.0 compatible and provided with a USB 3.0 cable.

  Should an external hard drive that has been used on USB 2.0 really be reformatted before it can be used on USB 3.0?    Any ideas please?  Thanks in advance.

  Hi Anish

  Could you please close this thread.  I initially bought the raid array when I got a laptop with a small hard drive.  Now, I have a desktop computer, I decided to take the two drives of 1 TB out of it and put them in computer as additional internal hard drives - one for my music and one to save periodically on.  It worked well.

  Concerning

  Alan

• Discover the usb hub and my hard drive speed.

  I would like to ask in this forum. I have a Seagate 1 TB external hard drive backup more USB 3.0. First when I bought the transfer speed still very well and I don't worry. After a few months, my data put in also increased as much time to something else as long as it is important to keep. The problem is that my hard drive now transfer data as slow as a snail. There just get 1 Mbps of transfer speed (only in my laptop, in all the hub in my laptop). When I plug it into another computer, it's fine running at 20 and 40 MB/s as normally as USB 2.0 wired hub. Another hard drive that plugged into my laptop works very well, so I guess that only my hard drive is never play well with my laptop, so that they begin to work ppliquee. I searched many tutorials that help me to solve the problem, but no one worked for me.

  Is it possible to solve my problem as something to change or update?

  I can't blame time my hard drive or my laptop because they are good, but if they linked together they do not work normally.
  I hope that all who read this can make suggestion or give a way to solve it. Thank you very much...

  Problem is a little Tricky and make me confusion

  However try to reinstall the USB 3.0 hub and USB drivers

  As you said the other disk HARD running at good speed, then the problem with your HARD disk and your computer

  Try the HDD running Test by downloading HDTUNE PRO and check the report of HDD health