Sansa Clip + uSD 2GB card not recognized

Similar Questions

• SD card not recognized in A07

  Dear

  I have upgraded my device (A1-07) to 4 android but the Sd Card not recognized by Tablet what should I do. I can not install any program.

  Please help me

  Kind regards

  M.S.Homayouni

  Hi M.S.Homayouni,

  Your question may be similar to this topic. You can try the solution that has been published to see if that solves your problem?

  Hope this helps

• Purchase of Sansa Clip and memory card

  I'm about to buy a Sansa Clip. I was planning on getting a 2 GB mp3 and the purchase of a 16 GB memory card.
  My question is, will they work together? A 16 GB card will work in a 2 GB drive? And the memory card should be SanDisk or can it be any business?

  Your help and your answers would be greatly appreciated!

  The Clip doesn't have a slot for card, only the Clip + and Clip Zip. Any size to maximum 32 GB will work. Any brand should work, but there has been reports of some brands does not not with the Zip model. That was supposed to be addressed in an update of the firmware, but to play in the trunk, I'd buy a SanDisk brand.

  And you can consider getting a larger capacity of 2 GB player. The extra cost is not much, and this extra room will be useful. Music libraries tend to develop, especially now that you have a cool gadget little listening to load them on.

• 4GB SD card not recognized

  Hello

  I ordered the Intex Cloud FX phone which is only available in India powered Firefox smartphone.
  I inserted a micro SD 8 GB card which works perfectly on other phones, but not on the Intex Cloud FX phone.

  The memory card is not recognized at all. Here are the specs:
  Phone:
  Brand - Intex
  FX Cloud - model
  Made in people's Republic of CHINA

  Memory card:
  Brand - SanDisk
  Capacity - 4GB
  Speed class - 2
  Another - large capacity (GC)

  Please suggest a solution.

  What file system is formatted SD card in?

• HP Elitebook 840 G1: SD card not recognized on Windows 8.1 (64 bit) of the HP Elitebook 840 G1 laptop

  Hello

  The SD card is not recognized by my laptop on Windows 8.1 (64-bit), even if it does not work on Ubuntu.

  I installed the driver from Alcor Micro chip card readerbut still nothing happen when I insert the sd card adapter.

  Is there another driver, that I should install?

  Thank you.

  Download another Realtek USB driver

• Satellite L30-101 WLan card not recognized after installing XP

  Hey

  I just finished my Vista to XP downgrade L30-101 and installed all the drivers I found were those that I needed, but now it's not recognizing the wireless and I do not know how to fix this...

  The wireless icon is not in the Internet Connections folder or anywhere else, but I have already downloaded a modem one try it and a network card, a...

  He had an Atheros card on it too I think, I downloaded the driver for this as well...

  Hello!

  Do you have the yellow marks or unknown devices in Device Manager?

  In your case I'd do an update of the BIOS if you n t have the most recent version, and Yes, you have an Atheros WLAN card, so you need Atheros driver.

  Please check if the switch wireless on the laptop is on.

  Good bye

• Sansa Clip Zip battery does not charge, goes directly to the screen of the song

  It's my third Sansa MP3 players.  The first was a Sansa Fuze with the round button.  Like that one but my husband needed more that I did it I gave it to him.  He is old, but the player is still so today.

  The second was a Sansa Fuze + with the touchpad.  The touchpad has been way too sensitive but I need to play only two songs for sleep therapy while I was fine with it until the battery suddenly stopped charging a few months ago, I posted my problems in the Sansa Fuze + forum.  After trying a few suggestions, I finally accepted that he was a Goner.

  I bought this Sansa Clip Zip 4 G, thinking that should last at least for a while because I use every day.  In fact, I needed only when I had disorders of sleep during the night;  I probably used it once every two weeks or more.  I used my cell phone to the device, had no problems until now.

  The last time that I loaded it was 2 weeks, to 98% full - the thing never indicated 100% while it was a little weird.  In any case, I had problems sleeping two nights ago so I took out the Clip Zip and noticed that the battery still had plenty of juice left.  This morning I checked the battery, he had 68%, but I thought I needed could again tonight so better it load up, just in case where.

  I connected it to my computer, but it did not show "connected" screen  Instead, he went straight to the last song I listened to.  I thought it was weird so I turned off the player then tried again.  Of course, he went directly to the screen of the song.  I noticed that the battery icon was showing 'filler '.  I thought that if I left it connected to the pc long enough IT would eventually deducted.  Two hours later, I checked the computer and it says that the drive battery was dangerously low.  I disconnected and then reconnected and this time he said 98% charged.  I loaded a bit more just in case so I used the player for about 15 minutes and the player turns off.  Plugged into the pc and now it says battery is extremely low, while the last hours do not charge the battery, but it drains pretty!

  My last attempt was to plug into a wall charger and guess what?  He went directly to the screen of the song once again.  Contrary to connect to the computer, I could actually turn off the player but this way does not charge the battery, or.   It's exactly the same problem as my second player, the Sansa Fuze +.

  I bought the last two players from Sansa, simply because I really liked the first which of course had been abandoned a long time ago.  I don't know if I have bad luck or it is just an issue joint Sansa players but one way or the other I don't buy any Sansa more in the future.  He is a big name that comes with the big disappointment!

  You can also try a reset by pressing and hold the power button for 20-30 seconds. Release it and then turn it on normally and see how it behaves.

  By your description of the message "dangerously low" you get then plug it into your computer, which tells me that you use MTP mode on the player (or default automatic default, MTP). MTP mode can be pretty weird; better to use MSC mode unless you have need to PSG for "protected" content or DRM files such as Rhapsody or audio in your library or Audible books. The small "crirically" message is a bug in Windows 7 (using MTP mode) that Microsoft did not consider important enough to fix.

• new sansa clip more 8 GB not detected but charge

  I got a sansa clip more 8 GB as a gift. new but old stock. everything works fine. except this is not detected by the pc. It will load.  I installed the drive, but I think that it isn't installed rhapsody. can I completely ignore the part of the Rhapsody? total newbie to mp3 sansa. I'm using windows media player 11, vista ultimate 64-bit version

  Miikerman wrote:
  As ends in General, no matter what Generic USB cable with straight plug should be fine with your drive. My hunch is that there may be some problems with the USB cable you have tried (something that you might want to check, by the way). Sometimes I use the USB cable that came with my Clips, sometimes I use one of my many generic not cheap-o cables; six of one and half a dozen of others - they all work very well.

  There is there the cables that don't transfer data, only the fee...

• Sound card not recognized by windows server 2008 r2 on h8 1120

  Hello

  I installed Window server 2008 r2 (x 64) on my new h8 1120it

  It was a pain to find all the drivers and install it, but finally I did it!

  .. almost. Because my sound card is not recognized by the system

  If I look in Control Panel of-> system-> Device Manager all the drivers are ok (no point warning exclamation!)

  Under the terms of his, I have 4 audio devices by NVIDIA and 1 generic audio device high definition with a microsoft driver installed

  Any suggestion?

  Solved! He just needs to activate audio services
  Sorry

• SD card not recognized by Windows 7 SP1 (Home edition), 32-BIT on HP Compaq 610.

  SD card is not recognized when I insert it. He used to work earlier, but due to a problem, I had to get it reformatted and now it has stopped working. There is no automatic detection for it. Also, I'm not able to determine if it is listed in Device Manager, not sure, under which entry, should I put to update the driver. I have laptop HP Compaq 610. Please suggest what all can be tried.

  Your driver card reader should be under USB controllers.  If she is not there, you've lost your license, or the drive has failed.  Visit the Compaq website to get a new driver.  If it still does not work, he probably missed and which is not uncommon.

  You can buy a reader of SD cards for less than $10.

• Card not recognized Bluetooth SDIO

  Hello
  I try to use the Toshiba Bluetooth SD card with my Dell Axim X 3, which, according to Dell, supports SDIO cards. They sell a Socket SD Bluetooth card for this camera. The card does not seem to be recognized correctly by the Axim. When I press the icon of the Axim Bluetooth settings, I get the message "an internal processing error has occurred with the Discovery Mode setting. This isn't the same error when I press the settings icon and the card is not in place.
  This error message is "an error has occurred with the Bluetooth card. Check that the card is working properly", so I guess that the device knows the card is here.

  I downloaded and installed the latest drivers for Bluetooth on the Toshioba support site.
  Anyone with experience with this. Any help is appreciated.

  Hello jariser

  It is really not easy to give you a correct answer, but in my opinion, you must contact laptop producer because they give you a guarantee that the SDIO card is supported.

  I really put t believe that you will find here on the Toshiba forum someone with the same problem. Contact the producer of the laptop or your local dealer.

  Good luck and I hope you will solve your problem successfully.

  Good bye

• AGP Radeon 4670 card not recognized by Win 7 32 bit

  Hi... upgrading an older machine with Win 7 and it does not see the video card.  MO is an ABIT IC7 - G.  Card has been recognized by Win XP very well.  Tried to download patches driver AGP Radeon, but they may not load.  Help appreciated because it's the second night of trying to solve this problem.  Thanks, Chris

  Hi all, I want to just this recap.   I was finally able to locate the original drivers on the disc that came with the card.   All charge very well and we are running.   Thank you all for your time.  This is usually the stage more simple that is the answer, huh?  Chris

• Satellite P100 - DVD burner and reader of SD card not recognized by Vista

  Hello everyone,

  I have improved my P100 of Xp to Vista and I can't make my DVD burner and my reder of SD (embeded to the laptop of course!) work.

  I can read CDs or DVDs, but I can't burn a DVD.
  My SD card reader in my device list but not appear in my browser!

  Even more, a 'mass storage' appears as not porperly installed but I have no reference on which device refer to the. Not to mention, I tried several times to install the utilities on the site Web of Toshiba sd but it didn't change anything...

  What laptop Satellite P100-xxx you have exactly?
  The number of extensions and model number would be very useful for further study

  Anyway. to get the card SD works in most cases you need to install the Flash Media driver
  In addition, it would be very interesting to know what SD card do you use.

  With regard to the Vista DVD burning issue;
  How have you tried to burn the DVD? Did you use special software to burn like Nero for example?
  Have you used different DVDs from different manufacturers of DVD?

  From my experience, it would be possible that the player manages all DVD. You try different DVD from different manufacturers. I had a good experience with TDKs

• Satellite Pro L10: 1 GB card not recognized SD

  My PCMCIA card reader does not recognize my sd 1 GB card that other cards work ok, but when I put the PCMCIA and sd 1 GB memory card in my wife on the other laptop, everything is fine.

  Hello

  Sorry, but it is not easy to say what to do. Do not forget that the PCMCIA card is installed correctly.
  By the way: can you tell us the exactly the description of this PCMCIA card and have you tested it with lower capacity cards?

• cq5300y... R7 240 card not recognized by the computer,

  want to update the video in my CQ5300y... have updated 550w POWER supply, RAM is 4 GB, CPU is Phenom 9750 quad core running win 7 64 bit.

  I bought a Sapphire Radeon R7 240 4 GB but the computer does not know it is there, keeps going to vid on board. I change in the bios to the PCI x 16.

  This card is not compatible? If this isn't the case, any suggestions on a good compatible card would be very appreciated.

  Found this one an hour ago... this particular MB is not compatible with AMD graphics cards... I tried different AMD 3, including an older, none worked... Equip NVIDIA and presto, no problems. Seems strange since it is an AMD processor.