Sansa Connect and Windows 7

Similar Questions

• Loss of Internet connection and Windows 7

  In our headquarters, we have a desktop system running Windows 7, but also an iMac.  The two are connected to Apple's Time Capsule, which serves as a router and a backup for the iMac hard drive. (our Internet connection is cable Internet, by the way.)

  Since upgrading from Windows Vista to Windows 7, the Windows 7 Desktop faces of frequent Internet connection errors.  Generally, it loses the connection to the Internet several times per day.

  Today, it's the worst event we've seen so far (since the upgrade to Windows 7 last week).  We usually only an Internet connection for about 2-3 minutes, then it is lost and needs to be repaired.

  We enter the control panel > network and sharing Center > issues > Internet connections

  Let us Windows 7 automatically diagnose and repair the problem.

  Whenever he goes through the stages of diagnosis and repair, it ends by "reset the connection area card."

  At the end of the process - after everything has been repaired - we get the following report:

  "Default gateway is not available - fixed.

  Should what measures we take to permanently solve this problem?

  Moreover, the iMac does NOT have Internet connection issues whatsoever.

  Thanks in advance!

  I don't know what you use to assign addresses, so I guess it's a router of some sort. You will need to go to the website of manufacturers, look at the manual and know how to limit the DHCP address field. I changed mine to limit the address 192.168.1.200 thanks 192.168.1.250 DHCP assignment. Your router can use the 10. subnet, so your address may be different, depends on the manufacturer of the router, or if you use a DHCP, the scope with the DHCP server. Gives me 50 IP addresses for all the guests who may want to use wired or wireless connections and should be more than enough. This allows me to attributed to the 192.168.1.1 through 192.168.1.199 a device and not having to worry about the DHCP server, you try to use one that is applied continuously to a device (printer, switch, PC, server, virtual server, etc.).

  Once this configuration of your router, you will now need to assign a static ip address to your PC. All this is done for the network card.

  On the start menu:
  Control Panel
  Network and Internet
  Network and sharing Center
  In the right pane of network and sharing Center
  Change the settings of the card
  Double-click your network adapter
  Check the box «Détails»
  Note the following lines:
  Connection specific DNS (may or may not exist, depends on the provider)
  IPv4 subnet
  IPv4 default gateway
  IPv4 DNS servers

  Once you have written those down, you can close this box.
  You should be back at the "Local Area Connection Status" box.
  Select the option "Properties".
  Select 'Internet Protocol version 4 (TCP/IPv4)', which will be in a blue when selected.
  Now, select the option "Properties".
  "IP version 4 (TCP/IPv4) properties" box should have popped up. If so:
  Select the following text:
  "Use following IP address".
  In the IP address box, enter an IP address. Example: 192.168.1.20
  Press the tab, the subnet must fill automatically, otherwise, enter the "Subnet IPv4" value you noted in the above step. Examp, e: 255.255.255.0
  The bridge of dafult, enter the value of the above procedure. Example: 192.168.1.254

  Now switch to the next 2 boxes, DNS servers. You can have only 1 entry in DNS server of the DNS entry you noted from above.
  Enter the DNS servers that you noted above.

  If there is "Connection specific DNS" writing or entries, follow these steps (otherwise, skip the sections "Connection DNS"):
  Select the option "Advanced".
  The "Additional TCP/IP parameters" window should open
  Select the "DNS" tab

  If it has more than 1 input "Connection specific DNS", follow these steps:
  Select it "add DNS suffixes (in order):
  Select "Add..." »
  In the "suffix domain', enter the first connection specific DNS entry.
  Select the option 'Add '.
  Add all the specific DNS suffixes that you noted. You can enter one at a time.
  When the radio button finished choose "OK".

  If you have only 1 entry in "Connection specific DNS":
  Entitled "DNS suffix for this connection", enter the entry you noted above for the "specific" connection DNS
  When the radio button finished choose "OK".

  Check the "validate their output parameters.

  Select the radio button 'OK '.

  Select the radio button "close".

  You should see the "Windows Network Diagnostics' open and check for any problems. I hope that everything is fine and he says 'Troubleshooting couldn't identify the problem' and choose 'Close the Troubleshooter'.
  Close additional boxes or pop-ups that are open and check and make the connection sure allis. If not, go back and check all the steps. the most common are the IP addresses and gateways.

  Good luck. After back if it solves the problem.

• HP drive connected and Windows 10: App crashing

  I want to delete my files on connected HP disc but the app no longer works since I've upgraded to Windows 10. How do my files?

  He worked for uninstall and reinstall. HOWEVER, the application was not on the list of programs in the control panel. I had to find in the list of programs on the start menu, make a right click and uninstall in the pop-up menu.

• Two issues I think are linked: connectivity and Windows Firewall status. Service dependency dose not exist or has been marked for deletion.

  I reinstall a Menory card to check the weather it was defective. I also reset CMOS as part of the process. (Recommended HP) I found that the card was faulty. After reboot, I had security alerts that Windows Firewall did not work. And also unable to connect to the Internet.  I restarted the Sprint after disconnection and reconnection there. (USB) I was able to get the Internet, but the red X connection
  on the screen in the taskbar never changed to "land". Hovering on it said "dependence on the dose of service not exist or has been deleted. Everything I tried for this problem, either online or offline has failed.
  Pretty much the same thing for Windows Firewall, I can't change the settings, turn on and dosen't snap so. Eror code 0x6D9. Also get code MSSvcservice 87 (0 X 609). Both are still declining. Can't get in Windows Firewall / Advanced to change settings or turn on firewall. Cannot find Microsoft Firewall Client ISA server, look like, go.
  Right now I'm pretty frustrated, been working on this a day and half and I'm pretty well lost.

  Problem fixed, would run recovery.

• Windows live messenger, they block my account. code 800488fb, so I can't connect and Windows messenger, I can sign, but, I can not add more contacts.

  I am Hubert,

  I had 2 problems:

  the first is with my Windows Live Messenger and the second with Windows messenger.

  a first:

  (Windows Live messenger) won't let me sign in!  error code # 800488fb

  They said they have blocked my account according to someone used to send SPAM messages and turn it back on, I had to give them my cell phone #, so they can text me a sort of code of repair, BUT I don't have a cell phone, and they redirect me here

  So is anyone who can help me to solve my problem?  Either way, I'm using Windows XP Pro

  Second problem is with (Windows Messenger)

  This one, that I can sign, but it won't let me add more contacts on my friend list, say, there is more to limit the number of contacts, and I only see one, so what do I do to see the others, so I can remove them.

  You will find support for Windows Live Messenger in these forums: http://windowslivehelp.com/forums.aspx?productid=2

  These latest related discussions:

  I have no contacts and it says to your list of contacts is full:
  http://windowslivehelp.com/thread.aspx?ThreadId=7b1a179e-525b-444A-9379-fcbb927419b6

  I can't add new contacts. The message said: there is a problem with Windows Live and I have to wait... :
  http://windowslivehelp.com/thread.aspx?ThreadId=0754a027-A414-4aab-88E6-935ef9a7bd88

  It cannot add new contact:
  http://windowslivehelp.com/thread.aspx?ThreadId=859644c1-641A-46FB-939d-bb2af8b1bf50

  Direct does not add my new contacts:
  http://windowslivehelp.com/thread.aspx?ThreadId=d5c9caf2-5484-4F83-b98a-5ce4666c4b77

• Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  What exact model of AirPort Extreme do you have? Either have your tablet or laptop Win7 been updated recently? They were both able to connect before and not now OR they were never able to connect? Can the laptop Win7 access Internet when connected by Ethernet? One of these devices have problems connecting to other networks Wi - Fi?

• HP PAVILION: / WIFI AND BLUTOOTH BOTTON/ICON IF POSTER NOT IN PC SETTING (CONNECTION) IN WINDOWS 8.1 HP PAVILION

  WIRELESS CONNECTION - WI/FI AND BLUTOOTH BOTTON/ICON IF POSTER NOT IN PC SETTING (CONNECTION) IN WINDOWS 8.1 HP PAVILION.

  THE SCREEN ALSO SHOWS

  PC SETTINGS > CONNECTION >... HE DIDN'T THERE WAS NO WIRELESS OPTION ON THE SCREEN... ALSO

  PC SETTINGS > CONNECTION > AIRPLAN MODE > WI - FI > WE WOULD NOT FIND ANY WIRELESS DEVICE...

  PLEASE SOLVE THIS PROBLEM

  Fortunately, I solved this issue yesterday... see below

  1. the ralink WiFi Adaper uninstalled form Device Manager

  Device Manager > network adapter > Ralink WiFi adaper > right click > uninstall

  2. download the Letest update to HP Support Assistant ralink Wi - Fi adapter

  3 installed 'last version of the Ralink wi - fi adapter' that we have download

  4. After successful installation, restart the computer

  5. change the setting of PC > connection... you can see on screen wireless Wi - Fi icon!

  But... I still have the problem with Bluetooth as

  Bluetooth icon not show in anywere in the laptop screen

  I check... Device Manager as

  Device Manager > Blutooth > I see Bluetooth yellow with trialngle symbol with. sign

  Please solve problem of Blutooth...

  Help me

• Pavilion dv6-7135nr: loss of network connectivity and wireless after upgrade to Windows 10 cable

  After the upgrade to Windows 10, I lose network connectivity after a restart of the computer.

  The operating system fails to load drivers Broadcom 4313 n. The driver date is May 8 202. The reason code is 31 on failure to load the drivers.

  I returned to Windows 7 and migrated to Windows 10 several times with the same result. I tried to upgrade on the Broadcom drivers, but Windows says they are up-to-date.

  I also see that the Realtek PCIe GBE Family Controller is having the same problem.

  I think it's a driver problem, but cannot find the correct set of drivers.

  Any help would be very useful. I have just re-upgrade to Windows 10 and have network connectivity.

  Hi @karbacdb,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6-7135nr Entertainment Notebook and problems with connectivity Wireless Windows 10. You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a document that shows how update the drivers that do not work correctly with Windows 10.

  Here is a tool of Broadcom for Windows 10 drivers that could help.

  Windows 10 drivers are available through Windows Update. Please be aware that HP does not Windows 10 drivers will be available from Windows Update.

  Please let me know how it goes.

  Thank you.

• Connecting to a server 10 Linux window and window 7 causes a connection timeout

  I have configured a certain configuration of Linux server in network.

  10 and the window 7 window causes a connection timeout when connecting to these servers.

  I tried to connect these servers with Windows not as Android and Mac but also Windows XP system and I connect to these server just fine so I don't think it's a firewall issue.

  I have also connected to these servers very well in the past with window 10 and Windows 7 so I think that the issue is a recent update of security Windows.

  Then I tried these problems myself but have no chance to find a solution

  I can also give you site to see the problem www.ozanet.com

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Error one of the UBS damage connected to this computer has malfunctioned and windows does not recognize it

  Original title: Canon MF 4500 printer inkjet

  My computer tells me that 'one of UBS damage connected to this computer has malfunctioned and windows does not recognize"it could the cable, as the printer (canon MF 4500) does not work.

  Hello

  1. what operating system is installed on your computer?

  2. when exactly you receive this error?

  3. all USB devices work properly on your computer?

  4. have you made changes on the computer before this problem?

  Method 1:

  You can try running the fix - it from the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  You can try to uninstall and reinstall the USB controller. Follow the steps.

  (a) click Start and then click Control Panel.

  (b) click System and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  It will be useful.

• can I disable having to connect to windows 7 and hotmail

  How do I change my settings to auto, connect to windows 7 and my hotmail account

  Hello janisum.  I understand that you want to have an account automatically connect at startup of Windows 7.

  This article has received instructions to connect automatically to an account on Windows 7.

  This article can show you how to save your Internet Explorer passwords.

  Let me know if it helps.  I wish you a nice day!

• How do another firewall my default firewall? I have to start firewall CA every time I connect and the firewall Windows will are also not activated.

  How to make another firewall that windows firewall my default firewall? I have to start firewall CA every time I connect and the firewall Windows will are also not activated.

  Hello

  • What version of Windows are you using?

  You can check this link:

  http://Windows.Microsoft.com/en-us/Windows7/Firewall-frequently-asked-questions

• I lost the connection to Windows 2003 server and through the connector.

  I lost the connection to Windows 2003 server and through the connector.

  original title: WHS connector has stopped working.

  Hi Mjopritchard,

  The question you have posted is related to Windows Home server and would be better suited to the Windows Home server community.
  Please visit the following link to find a community that will support what ask you:

  Support for Windows Home Server

• Upgrade of Windows 8 Wizard says: «we can not connect now...» Check your Internet connection and try again. »

  I have Windows XP and microsoft sent me a message to download Windows 8 via Windows 8 upgrade wizard and everytime I try to update the upgrade wizard says «we cannot connect you right now...» »

  I use a wired connection and my Internet connection works perfectly. My PC is compatible with the requirements of Windows 8.

  Please help me and solve the problem.

  I'm pretty sure that microsoft does not offer 8 or 8.1 free download. Microsoft does not offer

  its software like that, its probably anti-spam. Check this link for free there is no, OS, Win 8 downloads

  except enterprise edition...

  https://www.Microsoft.com/en-us/search/result.aspx?q=Windows%208%20trial%20SOFTWARE

• Problem to create the Internet connection sharing between Windows XP and Windows Vista.

  Original title: Internet connection sharing between Windows XP and Windows Vista.

  Hello

  Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said.  While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run.  I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.

  Thank you

  FG-man

  I tried this before using a laptop to share internet with my 360.  problem is there was Nat on the router, and it is in contradiction with the ics.

  Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_bridge_install.mspx?mfr=true

  If you go this route, you need to set a static ip address for the office,

  Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.

  Hope that this helped good luck