Two issues I think are linked: connectivity and Windows Firewall status. Service dependency dose not exist or has been marked for deletion.

Similar Questions

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• How to solve error 1075 the dependency service does not exist or has been marked as deleted by sharing my internet conection as temporary ad - hoc wifi connection? Windows 7

  For 6 months I have been successfully using my based ad hoc temporary internet connection wifi connection to aid Assistant ICS (internet connection sharing) on my computer laptop windows7, but last night my microsoft security essential antivrus detected and removed Trojan win64 sirefef. "" B and after that, I have this error 1075 "the dependency service does not exist or has been marked as deleted" whenever I tried to make the new ad - hoc wifi based connection to share my main internet connection for my other devices

  I was looking for a response, and since I met the same sirefef of virus variants. (x), after the removal of virus, that I remembered the place, that he has done.

  C:\WINDOWS\Microsoft.NET\assembly\GAC_MSIL

  As a solution, I think that if a system component is damaged I shuould fix first.

  In fact, I did a full upgrade to Windows 7 (build even) with the OS DVD.

  I must mention about the extraordinary capabilities of Windows 7 on the upgrade.

  After all the upgrade process which took about 2 hours to "Installation of Windows 7" discovered that .NET framework 4.0 is damaged and repaired. And I could start ICS.

  Without all this hassle if you could try to reinstall .net Framework 4.0, I think that this problem will disappear.

• Re-installed Windows XP on my Dell Mini 910 but installation has been sitting for 30 minutes and it does nothing.

  I have a dell 910 mini. It did not work properly, so I've updated with the xp disc. He went through the complete installation, shut down came back on and said please wait. I've been waiting for 30 minutes. What do we expect?

  original title: updated my windows xp

  Hello dancin4108

  Try the link below and let me know if it helps. Thank you.
  http://support.Microsoft.com/kb/315323

• I'm buying the elements of Adobe 12 phothop and I get the error message saying that a/c has been entered for another country. Please log out and log in with an existing a/c for this country.   I do not understand this message.  I registered with th

  Has anyone else had this problem with trying to buy Adobe photshop.

  Hi Ozziegirl,

  Please check the Doc: How to complete a purchase when I get an incorrect error 'country'?

  Kind regards

  Rave

• TNS-12545: Connect failed because target host or object does not exist

  Hi all

  I have two hosts with me. 1 host1 and 2. host2. Host1 have ORCL database. And when I'm doing the tnsping to host2 for database ORCL I get error below.

  [oracle@host2 ~] $ hostname

  host2.example.com

  [oracle@host2 ~] $ tnsping ORCL

  AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 5 April 2014 20:31:40

  Copyright (c) 1997, 2009, Oracle.  All rights reserved.

  Use settings files:

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORCL)))

  TNS-12545: Connect failed because target host or object does not exist

  Here's my tns annually involves Details:

  on host1:

  [oracle@host1 admin] $ listener.ora more

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = ORCL. WORLD)

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = ORCL)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  [oracle@host1 admin] $ more tnsnames.ora

  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

  # Generated by Oracle configuration tools.

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = ORCL)

  )

  )

  MYTEST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = MYTEST)

  )

  )

  LSNRCTL > status

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=host1.example.com) (PORT = 1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  Start date April 5, 2014 20:09:33

  Uptime 0 days 0 h 25 min 1 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/host1/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=host1.example.com) (PORT = 1521)))

  Summary of services...

  Service "ORCL" has 1 instance (s).

  Instance "ORCL", State LOAN, has 1 operation for this service...

  Service "ORCL. The WORLD' has 1 instance (s).

  Instance "ORCL", status UNKNOWN, has 1 operation for this service...

  Service 'ORCLXDB' has 1 instance (s).

  Instance "ORCL", State LOAN, has 1 operation for this service...

  The command completed successfully

  On host2:

  [oracle@host2 admin] $ listener.ora more

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = MYTEST. WORLD)

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = MYTEST)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  [oracle@host2 admin] $ tnsname.ora more

  TNSNAME.ora: no such file or directory

  [oracle@host2 admin] $ more tnsnames.ora

  MYTEST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = MYTEST)

  )

  )

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = ORCL)

  )

  )

  Please help me what I do in configuring the listener and tns.

  Kind regards

  Michel

  fb767351-A660-4b18-9a9f-73bc141f6a0c wrote:

  Hi all

  I have two hosts with me. 1 host1 and 2. host2. Host1 have ORCL database. And when I'm doing the tnsping to host2 for database ORCL I get error below.

  [oracle@host2 ~] $ hostname

  host2.example.com

  [oracle@host2 ~] $ tnsping ORCL

  AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 5 April 2014 20:31:40

  Copyright (c) 1997, 2009, Oracle.  All rights reserved.

  Use settings files:

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORCL)))

  TNS-12545: Connect failed because target host or object does not exist

  If your entry for "ORCL" tnsnames decided to 'contact' indicated info.  He tried to send a ping packet to the server identified by "(HOST = host1.example.com)". "  Oracle tns transmitted the request to the network stack of BONES for the resolution and routing.  Here, 'host1.example.com' host name could not be resolved to an IP address, or if it was, it was an IP address that is a dead-end.

  Here's my tns annually involves Details:

  We see the details necessary out of your tnsping tns.  Since the application never had the host (as is obvious in the error message), nothing about the questions of the listener - he never got.

  on host1:

  As your example tnsping host2, and says that the error message obvious host1 is nowhere to be found, like the listener, none of the files of configuration on host1 question - demand ever on host1.

  [oracle@host1 admin] $ listener.ora more

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = ORCL. WORLD)

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = ORCL)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  [oracle@host1 admin] $ more tnsnames.ora

  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

  # Generated by Oracle configuration tools.

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = ORCL)

  )

  )

  MYTEST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = MYTEST)

  )

  )

  LSNRCTL > status

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=host1.example.com) (PORT = 1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  Start date April 5, 2014 20:09:33

  Uptime 0 days 0 h 25 min 1 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/host1/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=host1.example.com) (PORT = 1521)))

  Summary of services...

  Service "ORCL" has 1 instance (s).

  Instance "ORCL", State LOAN, has 1 operation for this service...

  Service "ORCL. The WORLD' has 1 instance (s).

  Instance "ORCL", status UNKNOWN, has 1 operation for this service...

  Service 'ORCLXDB' has 1 instance (s).

  Instance "ORCL", State LOAN, has 1 operation for this service...

  The command completed successfully

  On host2:

  Okay, the problem being that a client on host2 couldn't solve a connection to hos1, these could be revealing.

  [oracle@host2 admin] $ listener.ora more

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = MYTEST. WORLD)

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = MYTEST)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  Except that in the example, we work with, host2 is the customer, trying to reach a database on host1.  Any listener on host2 is totally irrelevant.

  [oracle@host2 admin] $ tnsname.ora more

  TNSNAME.ora: no such file or directory

  [oracle@host2 admin] $ more tnsnames.ora

  MYTEST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = MYTEST)

  )

  )

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = ORCL)

  )

  )

  It's the only tns configuration file that is important for the problem at hand.  And we already knew what he said, since the output of your command of tnsping.

  Please help me what I do in configuring the listener and tns.

  Kind regards

  Michel

  Is "host1.exampl.com" the real hostname of your machine "host1"?  Or you made that blur in your ad - thing quite legitimate to do this for security reasons.

  Whatever, this is not really a matter of tns, unless of course 'host1.example.com' is really what you put in the tnsnames file, but your server "host1" became really something else.

  Assuming that 'host1.example.com' is the correct value, debugging starts with the following:

  [oracle@host2 admin] $ ping host1.example.com

  [oracle@host2 admin] $ tracerout host1.example.com

• How do another firewall my default firewall? I have to start firewall CA every time I connect and the firewall Windows will are also not activated.

  How to make another firewall that windows firewall my default firewall? I have to start firewall CA every time I connect and the firewall Windows will are also not activated.

  Hello

  • What version of Windows are you using?

  You can check this link:

  http://Windows.Microsoft.com/en-us/Windows7/Firewall-frequently-asked-questions

• Windows 10 Upgrade Wizard has been stuck for two days @ 99%

  the Windows 10 Upgrade Wizard has been slain for 2 days @ 99%. I can't turn it off or restart. Is there a solution to this?

  If the Upgrade Wizard of Windows 10 becomes blocked or unresponsive to 99%, wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• Get windows message could not connect to windows all the service of user agent install.

  Unable to connect to a windows service. Windows could not connect to windows all the service of user agent install. This prevents standard users to log on.
  As long as administrator, you can go through the system event log to see why the service did not respond. I don't know how to look at the newspaper and how to solve the problem if I do.

  Hello

  (1) did you make any changes before the show?

  (2) when exactly you get the error message?

  (3) you are able to connect to the desktop computer?

  Method 1: check if all windows users install agent service is started.

  a. press theWindows key + R, type services.mscand press ENTER.

  b. search service namedWindows user all install service agent.

  c. Windows user all install service agent must behandwritten.

  d. check if it is started, otherwise do a right-click on the service and clickStart.

  Method 2: Troubleshooting maintenance system to operate.

  a. press theStart button on the keyboard.

  b. click Control Panel.

  c. typeTroubleshooting in the 'search' tab, and press enter.

  d. clickshow all on the left panel.

  e. clickSystem Maintenance, new window will appear.

  f. follow the instructions on the screen.

  Method 3: run System File Checker Scan to fix the problem with missing or damaged files.

  a. press the Windows key + X, and then click command prompt.

  b. type the command:sfc/scannow , and then press on Enter.

  c. restart the computer and check.

  Note: The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.

  You can check the link for more information.

  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  Disclaimer clause.

  The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• ORA-12545: Connect failed because target host or object does not exist

  Hi all

  I am not able to connect database remotely. I have two servers with the name U.S. and localhost. Here are my coordinates tns:

  Details of the host server we:

  [oracle@US admin] $ more tnsnames.ora

  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora

  # Generated by Oracle configuration tools.

  PROD =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = EN)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = prod. WORLD)

  )

  )

  PROD_STBY =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = prod. WORLD)

  )

  )

  
  

  [oracle@US admin] $ more sysconfig

  Networking = yes

  NETWORKING_IPV6 = yes

  HOSTNAME = US.localdomain

  
  

  [oracle@US admin] $ more/etc/hosts

  # Do not remove the next line, or various programs

  # requiring a network functionality will fail.

  127.0.0.1 localhost.localdomain localhost

  : US.localdomain6 1 U.S.

  Remote Ping US server location:

  [oracle@US admin] $ ping 192.168.188.131

  PING 192.168.188.131 (192.168.188.131) 56 (84) bytes of data.

  64 bytes from 192.168.188.131: icmp_seq = 1 ttl = 64 time = 0,662 ms

  64 bytes from 192.168.188.131: icmp_seq = 2 ttl = 64 time = 0,558 ms

  64 bytes from 192.168.188.131: icmp_seq = 3 ttl = 64 time = 0,566 ms

  64 bytes from 192.168.188.131: icmp_seq = 4 ttl = 64 time = 0,603 ms

  64 bytes from 192.168.188.131: icmp_seq = 5 ttl = 64 time = 0.575 ms

  ^ C

  -192.168.188.131 - ping statistics

  5 packets transmitted, 5 received, 0% packet loss, time 4002ms

  RTT min/avg/max/leg = 0.558/0.592/0.662/0.048 ms

  Details of the server remote localhost:

  [oracle@localhost admin] $ more tnsnames.ora

  PROD =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = EN)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = prod. WORLD)

  )

  )

  PROD_STBY =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = prod. WORLD)

  )

  )

  
  

  [oracle@localhost admin] $ cat/etc/hosts

  # Do not remove the next line, or various programs

  # requiring a network functionality will fail.

  127.0.0.1 localhost.localdomain localhost

  : 1 localhost6.localdomain6 localhost6

  
  

  [oracle@localhost admin] $ cat sysconfig

  Networking = yes

  NETWORKING_IPV6 = yes

  HOSTNAME = localhost.localdomain

  [oracle@localhost admin] $ listener.ora more

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = prod. WORLD)

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = prod)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain) (PORT = 1521))

  )

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  [oracle@localhost admin] $ lsnrctl status

  
  

  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 4 February 2014 16:49:36

  Copyright (c) 1991, 2009, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  Start date February 4, 2014 16:42:09

  Uptime 0 days 0 h 7 min 26 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/localhost/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=localhost.localdomain) (PORT = 1521)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))

  Summary of services...

  Service "prod. The WORLD' has 1 instance (s).

  Instance "prod", status UNKNOWN, has 1 operation for this service...

  The command completed successfully

  Location of ping to the server hosting remote localhost:

  [oracle@localhost admin] $ ping 192.168.188.130

  PING 192.168.188.130 (192.168.188.130) 56 (84) bytes of data.

  64 bytes from 192.168.188.130: icmp_seq = 1 ttl = 64 time = 1.57 ms

  64 bytes from 192.168.188.130: icmp_seq = 2 ttl = 64 time = 0,223 ms

  64 bytes from 192.168.188.130: icmp_seq = 3 ttl = 64 time = 0,577 ms

  64 bytes from 192.168.188.130: icmp_seq = 4 ttl = 64 time = 0,571 ms

  64 bytes from 192.168.188.130: icmp_seq = 5 ttl = 64 time = 0,568 ms

  ^ C

  -192.168.188.130 - ping statistics

  5 packets transmitted, 5 received, 0% packet loss, time 4006ms

  RTT min/avg/max/leg = 0.223/0.703/1.578/0.458 ms

  Connection database target mode ensures via RMAN:

  [oracle@localhost admin] $ rman target sys/oracle_4U@PROD auxiliary sys/oracle_4U@PROD_STBY

  
  

  Recovery Manager: release 11.2.0.1.0 - Production on Tue Feb 4 16:56:45 2014

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-00554: initialization of the package manager internal collection failed

  RMAN-04005: target database error:

  ORA-12545: Connect failed because target host or object does not exist

  Please let me know the cause of this error and it please help me how can I solve it.

  Kind regards

  Michel

  OK, so you have a software firewall (IPTables) running.  By default, it will not be configured to accept connections on port 1521.  You have two options...

  (1) disable the firewall completely.  Run these commands to do this...

  stop /etc/init.d/iptables

  chkconfig iptables off

  The first command stops the service.  The second command prevents revived at every restart of the OS.

  (2) add an exception to the firewall for port 1521.  I'm not a Linux expert, but it should be something like this...

  Change the configuration of IPTables with vi...

  VI/etc/sysconfig/iptables

  Add a new rule as follows...

  -A of ENTRY m state - state NEW-m tcp tcp - dport 1521-j ACCEPT Pei

  Save and close, and then restart the IPTables service...

  /etc/init.d/iptables restart

  NOTE: you must always change the name of this server to something other than "localhost".

• The Parental account for my child's account has been disabled for inactivity and to accept the new terms of use for the xbox update must be parental confirmation.

  The Parental account for my child's account has been disabled for inactivity and to accept the new terms of use for the xbox update must be parental confirmation. I can't do this because even when you type the parental email address in the password recovery, it does not recognize because because it is inactive. I need a Windows Live technician to reactivate the account and I don't know if I should put the email address of the account here for security reasons. My other question is also if you can't reactivate can you switch parental permissions to another account.

  -Thanks, Michael

  Hello

  What version of the Windows operating system is installed on your computer?

  I suggest you to refer to the following article in the Xbox and check if it helps.

  Xbox LIVE connection issues:

  http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

  If the steps in the section of the Xbox did not help, then it would be better to post the same question in the Windows Live ID portal and forum Xbox to get help. We have a dedicated team to help you with questions of this type.

  Windows Live ID Portal: http://www.windowslivehelp.com/product.aspx?ProductID=10

  Forums Xbox: http://forums.xbox.com/

  Hope the information is useful.

• Windows Vista SP2 fails to install and Windows Firewall will not stay

  Hello, I have problems with Vista 64-bit, it will not install service pack 2 and Windows Firewall will not stay. I tried to manually enable ICF manually and it won't turn. It gave me error 6x9D. I ran several antivirus scans malware byte and pc cleaner pro 2012 and the issue has not been resolved. If I could get help would be much appreciated. Thank you

  Hello

  What do you use for security?

  If you are using an Internet Security Suite, it will have its own firewall and disables the default Windows Firewall.

  And you should have only one firewall to avoid problems related to the operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You have not installed SP1?

  If so, try a direct download of SP2.

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• How can I know if an external drive has been used for Time Machine and what computer it came with too?

  How can I know if an external drive has been used for Time Machine and what computer it came with too?

  I have several laptops and iMacs. I spent the relocation of the year and only used the MacBook Pro.

  Now I'm trying to figure out which drive goes with which computer

  I connected just a disk seagate 1.5 t and the first thing he did was to ask if I wanted to use it as a Time Machine drive.

  (1) if it is the TM disk accompanying this computer don't would not it have just started upward automatically?

  (2) what happens if I would have said yes?

  (3) I don't even know if it's been activated for TM. Is there a way to tell? It may hold just for iMovie files and other programs associated with a computer from my past.

  All readers of backup Time Machine contains a folder named: Backups.backupdb. If you open this folder, you'll find another folder with the name of the computer that has been saved. If several computers have been saved on the same disk, you will have several folders.

• I guess I tried to get to ICloud, and he has been churning for hours. How can I stop it? It will not allow a click anywhere in the window. And I can't seem to all other system preferences. It just goes back to this window. Thank you.

  I guess I tried to get to the ICloud, and he has been churning for hours.  How can I stop it? The Cancel button is grayed out. And I have ack

  are unable to other options in system preferences. It just brings back me to the window to iCloud churning. Thank you.

  What you're trying to do with iCloud, exactly? Have you tried pressing Command + Option + escape to force quit?

  See you soon,.

  GB

• Ethernet and Windows Firewall

  Hello

  I need to know what Windows Firewall rules must be defined for TestStand/CVI see the ARP protocol. We see nothing, no ethernet traffic.

  I have a system (Army Gold Master 7, using TestStand and CVI) who has "standard" Government firewall rules We strive to communicate by Ethernet to specialized devices and we see no traffic unless disable us the firewall. We are not on the internet (not allowed by gov). The specialized devices send a broadcast request for IP but the software it never sees.

  I added (incoming and outgoing) rules to allow traffic to and from my application (CVI app that does a lot of TestStand active X calls). In the logs I saw something on cviproxy so I put rules to allow that. I've set allow rules for TestStand Runtime engine. I also disabled Windows defender.

  Any suggestions? BTW, we will not disable the firewall once it is deployed.

  Thank you

  Hey Joe,

  I did some checking, and generally, CVI does not implement itself - treatment rather ARP packet, it uses Windows built in functionality to receive ARP packets and assign IP addresses. ARP is contained in the Protocol Ethernet himself and is at a lower level than the concept of ports, so that Windows Firewall cannot directly block ARP packets.

  Your software CVI aims to process ARP packets in some way, or are you just wanting to communicate with devices via Ethernet? If it's the last, then the assignment of intellectual property should arrive outside the CVI and regarding the CVI you must only make sure that the correct port has been opened for communication with the specialized unit. This port number would be depends on the configuration of the device itself.

  When you disable the firewall and are able to communicate with the device, how is the appliance gets its IP address? For example, it is automatically assigned by Windows or your router (with DHCP) or it has a static IP address assigned to him? It is possible that the IP address is assigned, but given that the specific communication port is blocked by the firewall, the communication can occur.

  I hope this helps a little, and if you can give us the answers to these questions, we can provide I hope to better understand the situation.