Sansa fuze will not turn on or charge

Similar Questions

• Watch will not turn on or charge

  Two days ago, I bought my watch and it worked perfectly. I left to come from overseas and I couldn't load it while on the plan so it is dead. When I'm here I plugged it in and now it is not turn on or charge. What should I do?

  Hello

  Try restarting your watch force: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

  If this does not help, then try to charge your watch for about 2 hours, making sure that you follow the instructions from here:

  • Check your battery and load your Apple Watch - Apple Support

  After this period, if it has not already restarted automatically, remove it from the charger and:

  • Try restarting it (by pressing the side button until you see the Apple logo).
  • If necessary, then try force it restarts again.

  More information:

  If your Apple Watch does not load, or it lights - Apple supports

• Sansa Fuze does not turn. * Officially solved! See post 7 in thread for answer! *

  OK, so I put a video that I made using the Sansa Media Converter. I made the video in one. AVI using SUPER and put the file in SMC. I waited on hidden. I'll be back and conversion was hung and stopped at 74. It wasn't a huge deal. It's happened before. I decided to come back in a bit to see if it continues the conversion. When I came back, my drive was off and the percentage bar had not moved. I removed the player and tried to turn it on. It turned on and "refreshed media." Immediately after, however, it stops immediately. I tried a soft reset (button / waiting for 15-60 seconds) and he came for a few seconds only to stop again. More funny thing is though, it actually stopped by itself. He even went to the screen 'goodbye'. Now it won't even turn. He lights and turn off by itself. Sometimes I can turn on soft reset, only that it is black screen. Even when I plug it to my computer, it will be either turn on, black screen after a few seconds or not at all.

  Player: Sansa Fuze 8 GB

  Computer OS: Windows XP SP2

  Firmware: 1.01.15

  Please, I beg you. This will be my second player perfect condition which has out crapped on my Sansa. I had an e2600 who had a hard drive failure after only 8 months. If I have a solution that States "buy a new player", I'm afraid I have to leave Sansa.

  Any help will be greatly apprieciated.

  Very well. I think I finally found the problem of this. The problem seems to lie in the SCM. It seems very harmful effects if during a conversion process, the computer transfers to virtual memory. An update of the firmware seems to correct this problem. Again, I will never video convert on this computer.

  I'll give this time, Sansa. Is not your fault.

  thread

• Sansa fuze will not update track licenses

  I must have the most ghetto sansa fuze there because I had so many problems with mine. I currently have two. I have the new firmware from sandisk sansa updater program.

  First of all:

  When I connect my sansa fuze to my PC to update track licenses, add songs, etc. that my computer slows down considerably and all internet access is stopped. I can't sign my account on rhapsody because the internet will not work. And since internet does not work when it is connected, I could not update my licenses and now they are all expired. Help, please!

  Second:

  I took the same sansa fuse to another computer. When I plugged on the second computer, I had no problem. However, when I try to update the licenses, the Rhapsody program says that the function is finished. But when I try to listen to music in the "rocket", the "rocket" tells me that track licenses are obsolete. I've updated the entire library and internal and external disks, appears in the pane. I hope this makes some sense. Any help is appreciated.

  It's the limitation of the Janus DRM.  You must update the licenses of track on the same PC as they were transferred from.

  This isn't a fault with Rhapsody, it's part of the way in which DRM system has been designed.  Format RealAudio RAX of Rhapsody has circumvented this restriction by using the Rhapsody from Sansa e200R.

  Regarding the license updates in the last 24 hours, the real servers had issues.  The system is back today!  Yep, I met the same question, a handful of devices update last night.

  Bob

• My torch of blackBerry Smartphones will not turn on or charge

  After that I'm home from work yesterday I decided to go for free my BB, but unfortunately what happens always was that whenever I plugged in the charger, a red light appears flashing on my BB and it would not turn on or work, I decided to let it charge all night to see if that would be the case. Later this morning, I checked out my Flashlight again to see that it would not even turn on again. I tried to connect to the computer to see if he could load from there, but no luck was found. I contacted then technical support from Rogers to get help, they first told me to do a quick pull out the battery and put it again to see if a reboot might solve the problem, no luck. They then told me to do the same thing, but this time when the red light shows that I would hold the space key for that BB would be start in safe mode, no luck. He then too try to reload the OS of my BB by BB Desktop Manager. Too bad, I could not even connect my laptop to my computer.

  So now I ask you guys to see if there is something else I could do that would fix my BB. Note that I would like a way in which I have to erase the memory of my BB, since I have not backed up the data again (I just bought it 2 days ago). But if I have too, I will.

  Hello

  There seems to be a defect with your handset, you just need to know where it is. What you explained I see that you have tried your feeder area and USB so the problem is not with the charger.

  If possible is that you can try using a battery of another torch? If you don't know anyone with your handset, you should be able to try this in the store one of your suppliers. This battery swap will show where the fault is, if the handset works with another battery, it means that your battery is defective - and if not then it's your handset.

  You will need to contact your network provider to arrange the repair or replacement of the defective material.

  Hope this helps

• Sansa fuze will not play and flashes pink message

  I love this player the "rocket" 4 GB, better than the 260e I used to have. But I had only used 1 hour when he stopped playing and flashed a box pink with black letters. "Synchronize to continue your music subscription" which is strange, because all music has been downloaded out of my cd personal message does not disappear, and the player will not play. Any help.

  How do rip you the CD? If you have used Windows Media Player, the default settings create protected WMA files.

  Also, you should post topics related to the rocket on the plateau of the rocket.  -Moved to the Fuze forum -µ

• Laptop will not turn on or charge

  My laptop only turns on when I press the power button. It will be not too to recharge the battery. I've had this phone for almost 2 years now, a this is the first time I have had this problem. I tried removing the battery and pressing the power for 30 seconds. I don't know if I need to replace the battery.

  My laptop is Windows 7 Home premium.

  How can I solve this problem?

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Battery is dead and the Satellite C660-15r not turn on or charge

  I have a PC laptop toshiba Satellite C660-15r I've had for a year.
  For these last days, I had to move the charger a little when I insert it into the laptop so he could load.

  Now the battery is dead and the laptop will not turn on or charge.
  It's not happened before and there is no other problems with the laptop.

  Have you tried to contact the nearest Toshiba service provider and ask for help first?
  I mean the guarantee must be valid in order to see whether they can help somehow.

  Please clarify this and send feedback.

  BTW: workbook correctly on the current doesn't provide not only (removed battery)?

• MacBook Air 11 '' does not turn on or charge

  So here's my problem, I was using the macbook and I decided to close it and then fell asleep. On the next day, I opened it and try to use it, but he never responded. I thought that the battery is dead so I plugged in the charger and discover that the light never went. I was scared so I watched some videos about it and found that I just need to disconnect the battery, turn on without the battery but the charger plugged in, and close it down and put the battery, but who did not work at all. I also discovered that the charger light would come if I just used the charger on another macbook, any ideas on what to do?

  PD: Sorry if I have errors of grammar, I'm not a native English speaker

  Hello

  Your grammar is very good!

  Try the troubleshooting steps in this article to support > If your Mac will not turn on - Apple Support

• HP 8500 has more scan not scan - I hear a fast spin and the book will not draw in the charger

  HP 8500 has more scan not scan - I hear a fast spin and the book will not draw in the charger. I tried a reboot, including disconnect the motor from the power analysis. A software update was just pushed through today as well, but the problem with the scanner was before this update. This update took place after the power has been turned off, then on again.

  The problem occurred this morning during a prior scan + back. I heard a click or pop/fast spin, something that indicates something was wrong, when he tried to feed on the 1st backsheet through for the scan of the back. Now, it won't take what anyone, even to make a copy using the feeder.

  When I look at the roll holder bar above paper, I noticed that it does not drop down to make contact with the paper he move to the scanner itself. I remember having this problem once before - there are 2 years, while the warranty was still in effect and does not remember how it was resolved.

  Any suggestions would be welcome. I don't want to buy another printer just to get the scanner to feed again. The printer itself is fine and scan from the bed is not affected.

  For anyone interested, I sloved the problem of roller scanner do not push the paper into the ADF.

  I turned off the printer last night. Today, I removed the power cable at the back of the printer and then unplugged the power cord from the wall. It was off for about 30 minutes. I reconnect the cable to the printer and the wall, the printer running and waited about 10 minutes. So tired the charger scanner again. It worked and I don't know why.

  Yesterday, I tried a version of what I found in the documentation for HP support. He said to do, but not to turn the printer off first. He has not worked for me.

  I don't know if my path has really had no effect on the results, but it works now and I don't have to think about buying a new printer for awhile yet. I like this idea!

• I have 6 phone is dead.  Will not turn back on

  I have 6 phone is dead.  Will not turn back on

  See Troubleshooting in the paper support. If your iPhone, iPad or iPod touch won't turn on - Apple Support

• Tecra M9 - sometimes that it will not turn on

  Hello.

  I have a Toshiba Tecra M9 who has a problem. Sometimes it will not turn on. You must remove the battery and press the power button. When it loads will work fine until I have move or take it upward and then hangs and crashes. Then, you must take the battery out so he can turn it back on if it will be in all.

  I tried to reload xp, tried without battery, tried a known good ram in both slots, a different hd and took part to see if I can see something loose, I have now run out of ideas.

  any help would be good

  Thank you

  Hello

  Which is really strange, buddy... In my opinion, that sounds like a hardware problem, what do you think?
  You should contact a technician for laptop (authorized service provider). Guys can verify and Exchange defective equipment parts. Maybe a mailfunction of the motherboard or the CPU

  By the way: you have updated your BIOS? If this is not the case, to do this, first!

• I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

  I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

  Honestly, this sounds like a problem of carrier. Are you able to make/receive calls or send and receive text messages? I would first check with the carrier to make sure that your phone is still set up to use mobile data. Something was accidentally deleted when they merged your bills.

• K010 ENVY: my laptop will not turn off

  Hello

  When I shutdown/hibernate/standby/resume my laptop, it will die completely.

  All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

  And when I try to Hibernate, everything is ok, but I have the same problem.

  Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

  After manual turn off, when I turn it on again, everything works correctly:

  -If hibernation: OS will continue to last situation.

  -If start/stop: OS works normally without error or warning.

  After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

  Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

  Is there a parameter/software to check and fix my problem?

  Thank you

  Hello

  You are welcome

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online

  NEW HP computer bought in September, already updated to Windows 7 with HP upgrade kit. I installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online. Also can not get a pop window to activate by phone. HP says that I must fully restore Windows Vista x 64 Home Premium AGAIN at the factory all MICROSOFT updates, and THEN... so I can reinstall Windows 7 upgrade. Why now only after 30 days Windows 7 refuses to ACTIVATE! Nothing but run between Microsoft and HP > Please HELP without having to reinstall EVERYTHING on my computer.

  Please go to http://www.microsoft.com/genuine/ and click on the button to validate Windows, and then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  -Online Windows XP: double-click the executable file to run the tool.

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  2. after running the tool, click the Windows tab and then click on copy to the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new post in the appropriate Microsoft Genine Advantage forum and paste the results of the WGA diagnostic data in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft