SATA0 connector does not work

Similar Questions

• HDMI connector does not work on this device

  Data sheet:

  ASUS laptop

  Windows 7 Home Premium

  1.3 Ghz

  4 GB of RAM

  64 bit OS

  HDMI does not connect with the TV and it works with my other laptop. I have pluged in the HDMI cable and turned on the TV input HDMI. How can I fix?

  Thank you for your help,

  Disco

  Hello rat Disco,

  1. What is the brand and model of the TV?
  2. do you get an error message or error code when you connect the HDMI cable to the TV?

  There could be various reasons as the TV is not compatible, cables not connected correctly.

  I suggest you run the hardware and devices Troubleshooter and see if that helps.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-CA/Windows7/open-the-hardware-and-devices-Troubleshooter

  If the problem persists, then I suggest you to try the steps from the following link:

  Connect your computer to a TV
  http://Windows.Microsoft.com/en-CA/Windows/connect-computer-TV#1TC=Windows-7

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Tecra 9100: Headset does not work

  My Tecra 9100, headphone connector does not work. Do the good internal speaker. If I plug in headphones or external speakers, the interns are being extinguished, but external devices, I don't hear anything.

  My sound card is generally, I thought that there could be a chance to solve the problem simply say - and reconnect wire/Council of the front-end connectors to the sound card... but I never did any technichal stuff in a Tecra, so it would be nice if someone could give me feedback where and how to open it, and if it's still a chance to solve my problem.

  Hello

  If you can hear the sound from the internal speakers as well as the sound card works correctly.
  In your case I recommend you first check the audio settings in the audio and audio devices you can find in the control panel.
  Check all THE audio controllers.

• Lightning cable does not work well

  Its already 3 weeks I use iphone to. the cable of the lightning that was in the box does not work well. I need to pull up to my phone charged. How can I solve this problem.

  Clean the lint on the connector of the lightning on the phone with a toothpick.

• After the replacement of my iPhone screen 6, front facing camera does not work.

  After the replacement of my iPhone screen 6, front facing camera does not work. The rear camera works fine, but when I switch to selfie cam I saw a still image of what was on the camera back; and on snapchat it simply refuses to move to selfie cam. I check to make sure that all connectors are deep-set. Any suggestions?

  If someone else that Apple will replace your screen they screwed up. If Apple has replaced your take screen back to the store.

• Satellite C70-B-306 - local network connection does not work

  Hello

  I have a problem with my internet connection, Wi - Fi works fine but when I put the cable with connector rj45 of the connection does not work.
  I see that my laptop want to connect but then the connection is lost again en it says cable is not connected. Who goes on and out.

  It passes between the cable and internet Wi - Fi connection. The cable worked fine on my desktop.
  What can I do? I have the laptop 1 week.

  René

  Hello

  What model of laptop do you have? Do you use the laptop with the original operating system preinstalled?

  Open Device Manager and check if the LAN CSA is listed and enabled correctly.

• Portege Z930 - display driver does not work properly

  Hello

  We have a Portege Z930 with Windows 7 64 bit in use where the Intel display driver seem to work fine.

  First problem is the slow presentation on screen - if we open a (simple JPG) photo and move the window, the frame window break during the move and showed very weird.

  Then, we have installed a U3.0 dynadock docking for the use of two external displays more. This method works even worse. To the docking station, we used the driver from the CD supplied in the delivery and connect to a USB 3.0 connector.

  On starting switching on 2 screens instead of internally for computer laptop screen does not work - and we use workaround of using an extended desktop on all 3 displays (2 external and internal display for laptop as the third).

  In Internet Explorer, it should turn off GPU Rendering and use Software Rendering rather because otherwise, we observed critical irregularities on the external screens (with 2 Windows Open the screen froze or could not display Windows Mobile). However the display isn't satisfactioning.

  We have tried 3 different versions of the recommended Driver Intel which is also offered by Toshiba to download; We loaded it is there and also 2 versions more (a more recent, one older) Intel directly.

  So, how can we get this working properly?

  Thanks in advance and best regards,
  N. Cochems

  More importantly. Make sure you have Service Pack 1 installed Win7. New laptops have problems running in win7 RTM (without service pack).

  It seems that Windows uses the standard VGA driver instead of the Intel driver. Uninstall all display drivers from Control Panel-> programs and features and then go to the Toshiba website and install the utility Intel Chipset then the Intel display driver, then go to DisplayLink.com and install the latest DisplayLink driver for the dynadock. The new software v7.xx DisplayLink driver fixes several issues found in v6.xx drivers.

  Verify that the Intel drivers are installed properly in Device Manager.

• Keyboard does not work properly

  Hello

  I had trouble getting my laptop satellite to initialize. Recovery disks & pressing F keys weren't working so I decided to open the laptop to see if there are any loose connections. To my surprise, the laptop seems to work again once I had the USB keys and put back them in! Unfortunately, before that I did, I opened the keyboard and peeked inside.

  When I booted up and tried to use the keyboard keys half of their work and the other half seem to think that they represent two other keys for example if I type the letter 'E' I get '3' and '-' as a whole. After 5-10 minutes the entire keyboard will become totally unresponsive until I restart again. Of course, I think I've done something here because this problem since I opened the bottom of the keyboard. This could be a hardware failure I have caused or is anyway that this issue can be resolved without replacing anything?

  Thank you very much

  Tom

  Hi Tom

  Theoretically, it might be just a connection lost between the keyboard and the motherboard, but I'm afraid, it can be a serious problem of m.
  Maybe you have damaged the connector of the keyboard cable or something similar, and not the keyboard does not work properly.

  I think the keyboard needs to be replaced to check if only this part is affected

• Energy function does not work properly (SP6100)

  Hi all

  last week, I have big problems with my laptop. On my laptop, I have three different systems of windows on different partitions 3 installed. On all systems, my laptop says i have to change the battery imediadly. But: I don't have my battery in my notebook. I'm still working with my adapter sector.

  The problem is that my laptop shoes the battery status in the taskbar and the notebook is changing in the mode "styndby" after a minute, when I does not work with it.

  These symthomes are on all my three systems, so I think, there must be a hardware defect.

  I can't lokate the defect. Everyone has an idea how to solve this problem?

  Thanks for your help

  Greetings from Bremen/Germany
  Thomas

  Hi Thomas,

  As Tom says rightly, you should be able to prevent your laptop goes into stand-by by changing the characteristics of the power management system.

  I believe that your laptop can be intermittent pause in his diet that is causing the power system to believe that it is running on battery power when it is actually on the current. Make sure that the power connector is firmly committed to place on your laptop.

  Normally, when this happens, you will need to turn off your laptop and then restart it to restore the normal AC power management.

  I suspect you're going to stand by as the Toshiba Power, utility allows you to define different characteristics for the battery and AC modes. As Tom says rightly, you can change the battery settings to prevent your laptop go in mode sleep.

  HTH

• Tecra A4: Display backlight does not work

  Hi all

  Thank you for taking the time to read this. I came across a dilemma. My sister laptop screen broke (baby) and it was far from always being in warranty and we had not assured him. So I bought a new screen for it and it mounted fine. When I turn on the laptop, I can hardly do anything on the screen as if the backlight does not work.

  I see that it is there, it's just very very dark. I thought this would be a problem with the inverter. So I bought a new one of those too, but alas, it still does not. I can do all things beautiful to display on an external monitor via the VGA port.

  Someone at - it ideas?

  Thank you once again

  Danh

  Hello

  I understand you want to save money, but especially help the technician is most recommended as repair by yourself.
  In any case, as mentioned, you should be sure that the cable has been connected in the right way.
  You must connect the LCD/FL cable to connector LCD/FLand connect the cable to connector HV HT. Place the module LCD, the FL inverter board in the correct position.

  Good luck!

• Tecra S1 video output does not work

  Hello
  I tried to connect my TS1 via cinch to a video projector. Unfortunately due to other reasons I can't use VGA.
  However I get no signal at all. I almost tried everything. I installed Windows XP with the Toshiba Recovery CD again, but it does not work either.
  Is that no one knows what to do?
  Best wishes
  Markus924

  Hi Markus924,
  you have an image on the internal lcd screen?
  through thumbtack to a video projector - it will not work...
  you get a pal/ntsc this connector signal... I don't know if your beamer can handle this type of signal...
  Take a vga cable to try * and * install the "fn + f5" Toshiba tool to move the picure to external display.

• Equium M50-235: the keyboard does not work after upgrde memory

  I just did an upgrade memory on my laptop using the second slot located under the keyboard.
  However, as I was putting the keyboard at the rear, the ribbon cable has pulled away from the motherboard and even if I pushed
  Reconnect and fixed with the clip, the keyboard no longer works.

  Is there a service manual I can get hold of someone know what could be the cause of the problem?

  Thank you!

  Hello

  First of all, once you unscrew the keyboard, open the clip that secures it in place and reinstall the keyboard by ensuring that it is completely down. After that, now the flat cable in place, close the clip. Then, make sure that it is not lost and that it is seated correctly. Then turn on the laptop and see if it works. If this is not the case, try an external keyboard. If an external keyboard does not work, the keyboard on your MB controller is dead and you need a new MB. If an external keyboard works then your keyboard is dead, or the connector on the MB is dead. Best way to test is to try the first solution. If it doesn't work, take it to an ASP so they can try another keyboard for your laptop. Good luck.

• HP Pavilion g7-1365dx: wireless keyboard does not work.

  I have a combination and connected mouse microsoft wireless keyboard to my laptop.  The mouse recently 'died' and replace the batteries with new Energizer batteries did not help.  I bought a new Logitech mouse and installed the new USB connector and the mouse worked flawlessly.  However, the wireless keyboard does not work now.  If I reinstall the 'old' or the original USB, the wireless keyboard connector works fine.  The new mouse does not work with the original USB connector.  So now I have two USB connectors that are connected to the computer to make the functional keyboard and mouse.  Is there a solution to eliminate one of the USB connectors?  I realize that the brand of the mouse and keyboard are different.  This is the problem and if so can it be fixed?

  CJB - 10 wrote:

  I have a combination of microsoft wireless keyboard and mouse connected to my laptop.  The mouse recently 'died' and replace the batteries with new Energizer batteries did not help. I bought a new Logitech mouse and installed the new USB connector and the mouse works perfectly.  However, the wireless keyboard does not work now.  If I reinstall the 'old' or the original USB, the wireless keyboard connector works fine.  The new mouse does not work with the original USBConnector.  So now I have two USB connectors that are connected to the computer to make the functional keyboard and mouse.  Is there a solution to eliminate one of the USB connectors?  I realize that the brand of the mouse and keyboard are different.  This is the problem and if so can it be fixed?

  Hi ECJ-10,

  Well, you answered your question yourself. They are different products, so you need 2 USB receivers.

  The alternative is to get a replacement of microsoft mouse if it is still under warranty, they usually do.

  Hope this helps.

• Keyoard USB does not work after unplugging and plugging in (Windows XP Pro x 64)

  I had to move my computer then I unplugged everything, including the usb keyboard and mouse usb.

  The mouse and keyboard have no drivers as they are supposed to be plug-and-play.

  The mouse works well, the keyboard does not work...

  I get the message found material (found the usb keyboard) new then I tell windows to search for drivers but nomatter where I order, it finds no driver.

  There are all the correct drivers that are built into windows.

  Fabrice what connector on the motherboard, I try, it will not find the driver.

  Hello

  • What is the brand and model of the computer?
  • What is the brand and model of the keyboard?
  • The keyboard works on another computer?
  • The computer recognizes another keyboard, if hooked up?
  • The computer is running at startup and shutdown after loading Windows?

  Restore the system to a point when the keyboard worked.

  See: http://support.microsoft.com/kb/306084

• Dell coming Pro 11 (7130) does not work with dock station (K10A) and mobile keyboard (K12A)

  Hello! There is a problem with my Dell place Pro 11. The Tablet does not work in conjunction with a docking station with a keyboard with battery docking station. The problem with the docking station, is only the work of power and audio connector. More is running, no ports (HDMI, USB, LAN). The problem with the keyboard, the touchpad and keyboard do not work. Once the battery is connected. Windows 8/1 Pro 64 bit is installed, the latest drivers and BIOS (A15). Without docking station and keyboard shelf works well. USB and HDMI ports on the tablet work well.

  What can I do?

  Thank you!

  Hello

  same problem here. Both my dock and travel keyboard no longer works. Only my dock workload but not USB, etc.

  I've updated my 7130 windows 10 with the latest bios drivers but no luck.

  Time for dell start with patches!

  Benny