Problem importing Sony EX1

Similar Questions

• Pixelation mp4 Sony EX1 on the problem of the framework

  Hello

  I just got CS6 and I mp4 Sony EX1 camera editting files I keep getting bad images here, one that's either a pixelation, or parts of the image, breaking and moving in the image. It is not always in the same place exactly, maybe some futher frames or back, but he keeps happenning in most of my clips.

  with some of the clips that have problems

  -J' tried to open the item in the source of the media browser even monitor problem.

  -J' tried openning a new project, the clip alone of a new user (own cache) still have the problem

  -Tired openning in After Effects even problem.

  - And when I export the clip, all the glitches to make print on export

  -When I open the video with an external program like VLC Player, no problem

  -I open it in another computer where I have CS5.5, no problem

  - And I convert Cineform clip, no problem again.

  Any help will be appreciated because I don't want to continue to work on my beautiful new CS6, but I can't.

  Thanks in advance!

  Yas Dalkilic

  Hi Yas

  Plese read this thread - could be related:

  http://forums.Adobe.com/thread/1009064?start=0&TSTART=0

  Ulf

• Problem importing FS5 Sony XAVC-L

  Hello

  I have problems importing XAVC-L mfx files in my calendar.

  When I drag them in my calendar of the Projectwindow (imported via mediabrowser) he hangs out only the audiotracks on the timeline, no video.

  in the sourcemonitor, I see the videotrack.

  any suggestions to fix this?

  everything is ok, in the determination of the DaVinco, it works very well.

  Thank you.

  Make sure that the V1 to the left of the lock in the sequence header is transferred to the blue.

• Equium is affected by the problem with Sony batteries?

  Does anyone know if Toshiba Equium is affected by the problems of Sony batteries? It is subject to recall, and if so what is the process?

  Thank you very much.

  Hello

  I also read about voluntary exchange battery Toshiba programs and I found this information site:
  HTTP://EU.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/GENERIC_CONTENT.JSP?SERVICE=EU&ID=0610_BATTERY_EXC HANGE_LANDING_PAGE

  According to this page only some portable computers manufactured between March and May 2006 are affected.
  I also found a useful FAQ on this topic:
  http://support.toshiba-tro.de/KB0/TSB6901KE000HR01.htm

  Hope I could bring light on this case.
  Good bye

• Problems importing files HAVE in flash

  Hey there,

  I ve you have an urgent problem, import of illustrator in flash files.

  Curved lines are moved with the corners in Flash!

  Take a look at the picture below:

  smooth outlines left side - not straight lines just right with corners Béziers

  When I import directly from I to AE I ve got no problem at all.

  Could you please help?

  THX marco

  

  Cool! Good news. I was able to reproduce it and immediately knew why you experience this problem when it imported into Flash. The original image (which is optimal btw) is pretty small scale. So I have it furred about 3 x in the file, saved and then imported into Flash again. The lines look much much better. Flash is not only to make the curves as well when they are really small.

• Problem importing sequences in AE CS5.5

  I'm having problems importanting "avi" video of my Vado HD in AE CS5.5 - playback of videos very well in Windows Media Player, but when they are imported into After Effects the clip is grey and only the audio track is available. I do not understand the problem because the codec must be installed for the Media Player read the files and I checked this by loading the film into GSpot with this result: Codec H264. The name of H.264/MPEG-4 AVC. Installed. Really hope someone can help me with this.

  I think you might be out of luck on this one... It is flavor H.264 hardware acceleration, intel, that AE has obviously never been decoded. I checked on CS3. There might be some active DLL, you can install intel themselves who can solve the problem, but I could not find in the shortness of the time. So that leaves a lot of external conversion as your only option. After passing through one of the tools, I mentioned it opens fine in AE...

  Mylenium

• Import Sony film Lightroom DC problem

  I am an experienced user of Lightroom CC on MacBook Pro running OS X El Capitan. I have no problem to import from my Canon DSLR and various models including G16 G.

  But I have problems with my new Sony RX10 III imports. The LR advanced import dialog box detects and any fixed images on the SDXC card. But he can't find or show one of the movies.

  As a solution, I can import files and search directories on the map. I found the movies under 'Private', as well as the JPG previews and still shots. But I lost my first days of shooting movies (I reformat the card in the device after successful import and backup.)

  Is there a way to tell LR to look in all the directories of the map when importing?

  Jim

  Lightroom CC 2015.6.1

  Camera Raw 9.6

  Sony RX10 III

  -Import directly from map in LR, no other software or cables

  Apple Macbook Pro

  OS X El Capitan 10.11.6

  Thank you Jim for confirmation.

  I did some additional research and can confirm the problem on my end. To reproduce the bug, I set the video format Sony RX10 III to film "XAVC S". In this mode, the Sony camera will the MP4 in the/Private/M4ROOT/CLIP. Unfortunately, Apple Photos nor Lightroom app knows where to look XAVC S videos (in mode "Devices").

  The problem will be fixed in a future update of Lightroom. Thanks for your report.

• Problem importing files raw mxf (Sony F5)

  Hey everybody,

  I use first Pro CC on Windows 8.1 v7.2.2 and wanted to import some images shot with the Sony F5. I have read that since v7.2 it is implemented for these types of files, but when I tried to import them there was "generic error".

  So I downloaded the Sony RAW plugin for Adobe (PLAD-RW1) and tried again. But once again: failure to import a file.

  Now it's interesting: the files are on my internal drive with 3TO (only for data). Just for the heck of it, I copied some files to my SSD on which Windows is installed. It is all of a sudden no problem to import the files into the first and better yet, the link Direct to SpeedGrade also this SSD works fine.

  But this cannot be the solution because there is not enough space for all my files on the SSD and it is usually a weird behavior.

  Does anyone have an answer why this is happening? I have absolutely no idea and really appreciate your help!

  Kind regards

  Fabian

  HA, I solved it. It's the discs...

  My hard drives must be too slow. I installed another SSD and with it, everything works fine. Looks like I have to be upgraded a bit...: Pei

• Problem importing photos in SONY's alpha 7R LR5

  After you import photos .arw in LR5, I notice color bars in most of the photos.  After the removal of the photo, the bars are displayed in the following picture.  I looked at the pictures in my camera and without these bars were present.  I tried to use 8.3 DNG Converter and that no longer works.

  Copies on your disk at this time that Lightroom accesses are corrupt and are essentially useless. No way corrupt.

  If the images are not corrupted on the card in the camera, you can try to transfer them to the computer by using a different material (for example, if you used a card reader, do not use this card reader)

  If the pictures that are on your camera card are corrupted, then you are basically out of luck.

• Problems with Sony Handicams

  I have the first Pro Creative Suite 5.5. My problem is that I use two different Handicams from Sony, the HDR-SR12 and HDR-XR260. When I import the clips, the HDR-XR260 (new model), looks very good. But when I drag the clips for the HDR-SR12, the framework is very small, with black that surrounds the entire image. My question is: what presets can I use to solve this problem and what format should I export with HD quality? Thank you

  > of the HDR-SR12

  Go with what Jim, that SOUNDS like you have a camera to record in HDV and one is the SD recording

• Problems importing the files from an SD card to iMovie

  After I have import files from an SD card to version 10.1.1 iMovie I have a problem when I eject the SD card then some of the files show just like a question mark (?) and some of the files are saved. I've never had this happen before that I can remember. I was just curious to know if maybe I do some thing wrong, or if there is a problem with iMovie.

  ! 0.11.4 OSX El Capitan.

  iMac late 2012

  Looks like you may have ejected from the SD card until all files have been copied to iMovie.  In fact I never use import to all but drag and drop files directly from the SD card mounted to an iMovie event.  This way an id that the files were transferred.

  Geoff.

• problem with sony XCL-C280

  Hello world

  I'm struggling to acquire images from a sony camera XCL-C280, I use a framegrabber to the NI PCIe-1430.

  I had to make my own camera file using the camera file generator (see attachment camera file, I had to change the extention of the CIM to txt to view it) and I think that I am not to far from a working solution.

  When I use MAX, I could only to get images if I disable the standard controls (on the tab 'Attributes of the camera' MAX), but if I leave the standard activated, controls when I either try to initiate or dumpster I receive an error "the requested series termination string is not found in the buffer returned."

  And I have exactly the same get LabVIEW, if the series controls are enabled, I get: "-1074397038 took place in Start.vi IMAQ - or the possible reasons: NOR-IMAQ: chain series requested endpoint not found in the buffer returned." and when I disbaled the series command I can acquire images but I sen can configures the camera via series controls more...

  Can someone help me with this problem?

  Thanks for your reply Joseph!

  No, the XCL-C280 must have "OK\r" as the chariot of the termination, I read the manuals of the XCL-C280 and one for the XCL-5005CR, these 2 cameras actually have a different endpoint... funny tank as it may seem.

  I have disabled commands series Max (and then realized it's a setting in the camera file "SerialDisabled (Yes)") and then it all works in LabVIEW, which is what I really want.

  I thought that disabling command series would then send commands to the camera using the series IMAQ write VI, but this is not...

  Do you know what he does at all?

  CIM joint working (renamed with the extension txt) file

  See you soon

• Problem with SONY DCR-DVD650. Unable to get the finished videos transferred to my computer.

  Hello world

  I have a Sony DCR-DVD650... I also use the mini DVD - RW for recording.

  When I put the DVD in my computer, or you are trying to access via a USB cable connected to the camera, however there is no videos. I can clearly see the videos in the preview of my camera...
  I've also developed videos...
  Solution Explorer displays a single folder which is DVD_RTAV which includes 3 other files 'VR_MANGR. BUP', 'VR_MANGR. IFO' and 'VR_MOVIE. VRO.

  What I am doing wrong? And how to get these videos on my computer to be able to
  Change them. Help, please! Would really appreciate it, thanks

  The basis of the record that you have seen inside the disc, you saved your footage in [VR mode]. The DVD_RTAV folder that you found inside the disc is indeed the folder that contains your images, and you can go ahead and copy the contents of this folder. The more you can do with these files is to find a software that will be able to read. It is not possible to change them on a computer.

  To ensure that you will not work in this problem next time, please save your videos in the standard [MOVIE mode] instead of [VR mode]. Once you have done so, you will find your images in a folder named [VIDEO_TS], and you will be able to copy and modify these files.

  If this post answered your question, please mark "accept as a Solution.

• Problem importing Certificate SSL in gateway desktop remotely

  Hello

  Windows 2008 R2

  Our SSL wildcard (by Go Daddy) certificate has expired, I have renewed, went into IIS, created a CSR, apply the CSR, downloaded the version of IIS of GoDaddy. completed CSR in IIS, applied the intermediate certificate, went into MMC and import the certificate into the local computer store.

  BUT... I have problems with the gateway Office remotely.  I can't import the cert generic it.  I'm in management gateway > properties > SSL certificate and take the option "Select an existing certificate" I see the generic cert, I select it and click on apply, it flashes away and then apply it is grayed out, so I click on OK, but says still no cert... status says I need a cert.  So it's like it is not recognizing the cert or is the kind of evil?

  Thought he could be authority, so I tried it with several different admin on the global domain IDs.

  I also went through MMC and imported the cert in the location of the remote office certificates, but who don't seem to have any impact.

  What I am doing wrong?

  Go Daddy suggests cert regeneration, but I don't want to do it again unless I need to.

  Any ideas?

  Thanks in advance!

  After much research, found this https://support.microsoft.com/en-us/kb/959120

  Changed the link for port 443 and it worked!

• Problem importing HDL node VHDL

  Hi everyone, I'm using the HDL node in LabVIEW 8.6 for trying to import a VHDL design created using the of Matlab Simulink HDL coder. The problem I encounter is that design includes a state machine that HDL Coder created a separate VHDL file that the high-level VHDL to reference. At present, I found no way to tie the knot of HDL correctly this listing.

  I have attached the files VHDL, both "as generated" by the HDL coder and a version that I modified to make it compatible with the HDL node (as for change of clk_enable to enable_in).  The QEI.vhd is top level refers to the State in FSM.vhd machine. If someone could suggest a way to integrate the latter into the HDL node then it would really help my (very) limited VHDL.

  Thank you

  Andy

  p.s. An idea that I think might work, but I'm not able to do (due to lack of knowledge of VHDL) would be to take the contents of FSM.vhd and include it in QEI.vhd. If someone could suggest a way to do that, then I'm pretty sure that would also solve the problem.

  I managed to do a rather rough work-around to combine the two files that I'm pretty happy with for the time being.