Satellite 1400-503 with a DVD + R problem

Similar Questions

• Replace drive combo 2212 sd - r on the Satellite 1400-503

  Hello world. I have a Satellite 1400-503 through the 2212 mixed sd - r drive that makes the problems on reading and writing of cd and dvd. I want to replace but freezes when I tried to boot the laptop with other devices. The same problem also came with the replacement of the hard disk. When I handed the former parts Notepad starts. I did a bios update without any results. The local representative in Greece (where I live) wants 400 euro to replace the drive. Any suggestions please?

  Thank you George Fazakis

  Hello

  Unfortunately, it is easy not exactly to say why the laptop freezes. Maybe you used unsupported devices. You reinstall the Windows operating system after the replacement of the device?
  If this is not the case, try it.

• Satellite 1400-503: question of power

  Hello

  Yesterday, I turned on my labtop Toshiba Satellite 1400-503 model: PSI40E-03CSR-SW (on industry) but the screen was dead.
  I removed the sector and put it on another taken decision-making and the screen turned on telling me the battery is low.

  I removed the power and reconnected it. It worked.
  Today, it's the same (dead screen) I removed the battery (always on the area), but nothing happened.

  I replaced the battery it lit and the screen lit up for topic a minute, but then the screen died.

  Issues related to the:
  -A labtop can always run on sector with a dead battery?
  - Or if the battery must be good to work on the sector?
  -Can you remove the battery, and still works the labtop on food?

  The computer is old about 6-7 years and the only time I use the battery is to be market even if I plug it into the sector.

  I hope someone can advise!

  Thank you

  Answers to your questions:

  1. Yes, a laptop can operate on sector, even with a "dead" battery

  2 No, the battery doesn't have to be good, but it would be desirable to have a good state of market batt. installed.

  3. Yes, you can remove the battery and only work on sector. It makes no difference, but be careful when you remove the power to the machine. ;)

  Simply by typing the reference battery in google, you can google for a new battery. The partnumber begins with "PA" and then a number.
  Welcome them

• Satellite 1400-503 and drive HARD MK8032GAX

  I want to improve my old laptop Satellite S1400-503 with a new HARD drive.
  Originally, she welcomed the 20 GB drive Toshiba MK2018GAS.
  I woul want to buy a new one - Toshiba MK8032GAX 80 GB.
  He would run in my notebook?

  Hello

  You will be very happy if someone can confirm this. I can tell you that you can test. If this HARD drive is not working properly you can return.

• Satellite A100-011 with Vista: DVD-ram UJ-850 s can not burn DVDs dual layer

  Hello

  cannot find answers to my problem, so start a new topic.
  Having Satellite A100-011 with Vista preinstalled and Mat * a DVD - RAM UJ-850 s (firmware 1.10).

  Recently installed Nero 7.5.9 and you want to burn DVD (6, 5 GB) media dual layer (Immation - Ritek).

  First time Nero stopped with information: could not perform start of Disc At Once (without damaging the media).
  After that, run Nero as Windows XP - SP2 program and burn half the disc (first layer), but when to start to burn the second layer (I guess), stop once again with the same error information (could not perform start of DAO).

  Simple disc burning layer without problem.

  Anyone any idea how to solve this problem?
  Thank you
  Luci

  Hello

  tried to record double-layer of a different brand? Maybe you should try it, because sometimes certain brands are not really taken in charge or not very well. And check the toshiba (or google) pilot site for new drivers or firmware for this drive, sometimes that it really helps.

  I think that the media are not really compatible, I ve read some similar problems in the roxio forum and they solved by using another brand.

  Would be nice if you give some information on this case... :)

  Welcome them

• Driver update for Satellite 5100 503 with NVIDIA geforce4 440 Go

  Hello there,
  It is a German call...
  I need an update of the graphics driver to a computer laptop toshiba satellite 5100 503, the nvidia geforce4 440 Go, that you can't get on the nvidia site, where have no mobile system to get.
  My laptop is quite slow. I want just to speed up its performance.
  Thank you outthere

  This old laptop model is certainly not longer supported and you do not find an update on the Toshiba support page. What you can do is to look around to find the laptop with the same graphics card, but maybe with newer driver and try to install it.

  Can you please tell us why you need more graphics performance? For games?

• Satellite P300 19 p - CD/DVD burning problem

  Hi, I'm new to the forum and I hope somone will be able to help.

  I have DVD burning problems. When I use software engraving the image is usually copied ok and then the burning process starts, which usually lasts only a few moments, then the machine spits out the disc burnt and wasted.

  I usually use Corel DVD Copy 6, but have you tried TOSHIBA and other programs such as NERO. With the help of Corel VideoStudio, it burns discs with a success rate of 90%, but the problem comes when you try to copy my own created disks.

  I tried different types of discs (that is to say + R and - R), and I also tried burning speeds.

  Anbody else suffers from this problem?

  I have managed to find an error code 06077-26 - 2A 040902, made this average anyhting for anyone?

  TEMPRO alerts appear to have provided updates firmware for a number of other DVD players, but not for my machine? Maybe it's due a? All the drivers are up to date.

  Thanks for listening and the anybodies help is more than welcome.

  See you soon.

  In my opinion, you should not think about buying replacements. If you think that the drive does not properly contact service. If necessary the reader will be replaced free of charge.

• Satellite A100 - 785 PSAANE - CD/DVD drive problem

  Hello friends,

  I have a Toshiba Satellite A100 - 785 PSAANE and its configurations are as follows:

  1.87 C2D Ghz, 1 GB of Ram (512 + 512), Windows Vista Basic, CD/DVD read/write...

  Question: Its been long enough, I m facing some problem with my optical drive. Whenever I insert a CD that is originally made by any company, it works fine. At the time when I insert a CD that is personally burned with any normal CD data / engraver of DVD or CD that have been created previously by the same laptop mentioned above, its been interpreted as a blank disc. The data on the drive are not displayed.

  For example: lets say if I insert a cd of the software as my webcam cd or cd of my printer they can be read normally and work very well. But at the point where I have to enter any cd that was burned by me that contains my personal files, it is read as a blank disc.

  This problem does not exist with any of the DVDs. that is not serious every dvd I insert either being a software normal dvd or one that is burned as a given personal dvd, everything works fine and all the data DVD can be read.

  I tried to reinstall the driver, I tried to reformat my laptop using the supplied with the notebook Toshiba Recovery CD, but the problem persists.

  Between a few months ago, I tried to do a few tweak, as firstly I have insert the cd in the drive and then turn off the reader of cd and then allowing it once again would actually read the cd. But after a few tries, it also stopped working.

  Now I have really no idea what should I do to get my CD to work normally.

  I hope that this message can help out me.

  Your help will be appreciated

  Thanks for your precious time

  Concerning

  Christophe

  Hi Claudia,.

  To be honest, I never heard A785 Satellite.
  You should check the model number again, as wrote Akuma. It would be important to know.

  But in General if you have the same problems after using the Toshiba Recovery disk it seems to be a bad material work because the recovery disc can restore the factory settings.

• Updated by Satellite Pro 6000 with a DVD burner - technical question

  Hi all, I just bought a DVD burner that is adapted to the Bay of selection to replace the old DVD player...
  He came 'naked', so I thought I'd just disassemble the frame of the old drive and put it on the new...

  But: not the slightest Phillips screwdriver will integrate these screws; in fact, they look very special and I do not know how to remove...
  Should I have any instrument/tool special and if so, where do I get it? Maybe I'm too blonde...

  Someone here who can help?

  Thanks in advance! lionesse62

  Hello

  You need a special screwdriver to remove the module bay select (CD/DVD drive).
  A 2 mm screwdriver Phillips, a pilot of flat blade screw 4mm and a LHSTIX of 4mm screwdriver.

  I think you should visit a laptop computer technician if you n t have the right tool to remove these screws.

  However, if you want to remove the module bay select the Satellite Pro 6000 laptop then follow this instruction;

  (1) turn the computer
  (2) when the lock screw is in the locked position, remove the screws and fix it on the hole to keep her temporarily locking screws.
  (3) slide the lever and pull place the selectable bay module.

  After you remove the DVD rom, you need to remove the connector and the connector cover. The connector cover is fixed with screws of black 2M2x8 liaison.
  The frame is blocked with five super flat head white M2x3 screw.

  As I said, if you can not remove these screws and then ask a technician for help.

  Good bye

• Error in audio - output Satellite P200-1EE - Toshiba HD DVD player problem

  Hello

  I'm new here so I don't know if I'm in the right forum or not, if I'm not I apologize.

  I have a Satellite P200-1EE and tried to play DVDs on Toshiba HD DVD player but everytime I try it comes up with an error message saying "an error has occurred in the audio output settings. Please check audio driver is set up correctly. »

  I tried the update audio drivers but it tells me that I have already installed the drivers the best.

  Any help would be most appreciated.

  Thank you for your time.

  Hello

  What OS do you have?
  What is Vista?

  If yes then another question; have you installed SP1?

  Please also see the European driver of Toshiba page and choose your model of laptop.
  There is a DVD HD v4.32.00 patch reader.
  The other version 4.51.07 HD DVD player is a full version and if the patch won't work, then you must install the full version.

  See you soon

• Satellite A100 (PSAA9A) and Vista DVD maker problem

  I just got windows ultimate on my laptop that I got about 2 and a half years and he says about this Windows Vista capable. So I have to drop out and everything but when I open something like Vista DVD maker, he says that my video card meets the minimum requirements.

  Check my driver and it says Standard VGA graphics card? Strange huh? So went on Notebook driver downloads > Satellite > A100 (PSAA9), but then he only gave me the opportunity to PSAA9E and I need A at the end.

  In any case I put t know whether or not that counts, but I downloaded the driver and check the update driver > Browse pilot, first of all it only let me not click Desktop and didn t let me inside the office even with submenu.

  So I just clicked next and guess what! After all that palaver he said the pilot has the last updated and doesn t need to be installed but it obviously hasn't t because it's model is something starting with 6 and the driver Vista I want download it something starting with 7, so I'm really stuck and really help.

  Thank you

  Hello

  At the bottom of the unit, you should find the name of detailed; something like Satellite A100 - xxx PSA.

  Could you please post this number and name?

  The A100 is certainly capable of Vista, but this does not mean that you can use all the features of Vista.
  My other laptop manufacturer is Vista capable, but for example the doesn t run Vista Aero due to the performance of the weak graphics card.

  Creating Windows DVD is available in Windows Vista Home Premium and Windows Vista Ultimate Edition, but some features may require advanced or additional hardware.

  Check this box:
  http://www.Microsoft.com/Windows/products/windowsvista/features/details/dvdmaker.mspx

  In any case, the graphics driver on the right must be installed to ensure that such feature Vista can run correctly.

• Satellite A60-712 with ati2dvag ATI driver problems

  Using the notebook after a short time the ati driver crashes setting the display resolution to 640 x 480 and the minimum color depth.

  This is the error code:
  BCCode: ea BCP1: 83E23C90 BCP2: 83E31008 BCP3: 83F65008
  BCP4: 00000001 OSVer: 5_1_2600 SP: 2_0 product: 768_1
  

  I try but I can't be able to solve it, an idea?

  Hello
  I think that there are only two choices for you.

  The first is to uninstall and reinstall the ATI Driver.If that does not work, try to restore your system with the CD or DVD delivered.

  If after this procedure the fault persists, contact the nearest Toshiba Service Station for control of your laptop.

  Good bye

• Satellite 1400-503-fire flashing orange

  Hello

  I decided to try to fix my old laptop, but I'm stuck on something.
  When I'm trying to turn the machine on, it flashes right in the following order of morse code:

  -long =
  . short =

  *. - . . - - - .*

  That could possibly say? I really don't want to not spend money fix at some point of service. Suggestions?

  Hi qtong,

  This means that your mobile doesn t start more, you get only this blink code, right?

  Well, in this case, it seems to be a serious hardware problem and only an authorized service provider can help you because they have special tools to check what this flashing code means.

  For now, I guess it has something to do with the motherboard itself but that of just my personal opinion.
  Motherboard Exchange is really expensive, as you probably know, so I doubt that it would be useful to fix

• Cannot retrieve the Satellite C855D-15W with recovery DVDs

  Because of the issue, had to do a factory reset.
  Laptop came with preinstalled Win 8.

  Order recovery of Arvato media.

  In vain several times tried to recover the laptop using the discs. Same problem occurs: -.

  complete partition initialization
  * "Copying files please wait" 1.5 to 2 hours "
  * "An error has occurred.
  error: 0002
  Copy image error
  Please press OK to shut down the computer.

  Now the HARD drive is completely removed.
  Suspect the recovery media and asked for replacement.

  Any help / settings would be appreciated.

  Thank you
  concerning
  Piping Plover

  Hello

  In my opinion, there are two reasons that can explain why the recovery procedure fails.

  (1) failure of HARD drive
  (2) failure of the recovery disc

  I think you should first check if the disk HARD isn t the troublemaker.
  Go to BIOS (F2) and check if the HARD drive is listed on the first page of the BIOS.
  In case it is, the HARD drive may be OK

  In this case, the recovery disc may be defective.
  In this case, you should get in contact with the provider/supplier (Arvato) disk for the new medium.

• Satellite A200 - photo with Photoshop CS4 Extended problem

  Hello world

  I have a laptop Toshiba Satellite A200 and I tried to install Photoshop CS4 Extended yesterday.
  There seems to be a problem that every image that I raise looks like this http://www.flickr.com/photos/meg_and_fred/2990212103/ (image link to my flickr account to show what is happening)

  I've updated the ATI driver, uninstalled and reinstalled CS4 and its still does not. I also have Photoshop Elements 6, which opens the same images perfectly so it mus be a CS4 and A200 compatibility problem - does anyone know how to solve this problem, or what could be the problem?

  Thank you very much!

  Maybe you need to update your software Photoshop CS4 Extended.
  In my opinion, this could solve this problem because, as you said the picture can be changed correctly using the Photoshop Elements 6.

  I think that it s ONLY a problem of software Photoshop CS4 Extended.